1
1

Add some Cisco-related platform files

This commit was SVN r21422.
Этот коммит содержится в:
Ralph Castain 2009-06-12 17:50:14 +00:00
родитель 814a8f5e0f
Коммит 89b7e20a8b
10 изменённых файлов: 491 добавлений и 0 удалений

21
contrib/platform/cisco/macosx-dynamic Обычный файл
Просмотреть файл

@ -0,0 +1,21 @@
with_memory_manager=no
enable_mem_debug=yes
enable_mem_profile=no
enable_debug_symbols=yes
enable_binaries=yes
with_devel_headers=yes
enable_heterogeneous=no
enable_picky=yes
enable_debug=yes
enable_shared=yes
enable_static=no
enable_contrib_no_build=libnbc,vt
with_xgrid=no
enable_io_romio=no
enable_ipv6=no
enable_mpi_f77=no
enable_mpi_f90=no
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_memchecker=no
enable_mca_no_build=carto,crs,maffinity,memchecker,paffinity,rmaps-round_robin,rmaps-seq,rmaps-topo,rmaps-rank_file,filem,plm-slurm,plm-xgrid,snapc,routed-binomial,routed-direct,routed-linear,routed-radix,routed-slave,grpcomm-basic,grpcomm-hier,ess-hnp,ess-tool,ess-singleton,errmgr-default

Просмотреть файл

@ -0,0 +1,21 @@
with_memory_manager=no
enable_mem_debug=no
enable_mem_profile=no
enable_debug_symbols=no
enable_binaries=yes
with_devel_headers=yes
enable_heterogeneous=no
enable_picky=yes
enable_debug=no
enable_shared=yes
enable_static=no
enable_contrib_no_build=libnbc,vt
with_xgrid=no
enable_io_romio=no
enable_ipv6=no
enable_mpi_f77=no
enable_mpi_f90=no
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_memchecker=no
enable_mca_no_build=pml-dr,pml-crcp2,pml-cm,crcp,pml-v

Просмотреть файл

@ -0,0 +1,64 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_component_show_load_errors = 0
orte_abort_timeout = 10

64
contrib/platform/cisco/macosx-dynamic.conf Обычный файл
Просмотреть файл

@ -0,0 +1,64 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_component_show_load_errors = 0
orte_abort_timeout = 10

Просмотреть файл

@ -0,0 +1,22 @@
with_memory_manager=no
enable_mem_debug=yes
enable_mem_profile=no
enable_debug_symbols=yes
enable_binaries=yes
with_devel_headers=yes
enable_heterogeneous=no
enable_picky=yes
enable_debug=yes
enable_shared=no
enable_static=yes
with_wrapper_ldflags=-Wl,-search_paths_first
enable_contrib_no_build=libnbc,vt
with_xgrid=no
enable_io_romio=no
enable_memchecker=no
enable_ipv6=no
enable_mpi_f77=no
enable_mpi_f90=no
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_mca_no_build=pml-dr,pml-crcp2,crcp,pml-v,pml-cm

Просмотреть файл

@ -0,0 +1,64 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_component_show_load_errors = 0
orte_abort_timeout = 10

28
contrib/platform/cisco/suder/debug Обычный файл
Просмотреть файл

@ -0,0 +1,28 @@
enable_dlopen=no
enable_mem_debug=yes
enable_mem_profile=yes
enable_memchecker=yes
enable_debug_symbols=yes
enable_binaries=yes
enable_heterogeneous=no
enable_picky=yes
enable_debug=yes
enable_shared=yes
enable_static=yes
enable_ipv6=no
enable_mpi_f77=no
enable_mpi_f90=no
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=yes
enable_ft_thread=no
enable_per_user_config_files=no
enable_orterun_prefix_by_default=yes
enable_io_romio=no
enable_mca_no_build=carto,crs,filem,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm
enable_contrib_no_build=libnbc,vt
with_slurm=no
with_openib=no
with_devel_headers=yes
with_memory_manager=ptmalloc2
with_valgrind=no

91
contrib/platform/cisco/suder/debug.conf Обычный файл
Просмотреть файл

@ -0,0 +1,91 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,tcp,self
## Setup MPI options
mpi_show_handle_leaks = 1
mpi_warn_on_fork = 1
mpi_abort_print_stack = 1

26
contrib/platform/cisco/suder/optimized Обычный файл
Просмотреть файл

@ -0,0 +1,26 @@
enable_dlopen=no
enable_mem_debug=no
enable_mem_profile=no
enable_memchecker=no
enable_debug_symbols=no
enable_binaries=yes
enable_heterogeneous=no
enable_debug=no
enable_shared=yes
enable_static=yes
enable_ipv6=no
enable_mpi_f77=no
enable_mpi_f90=no
enable_mpi_cxx=yes
enable_mpi_cxx_seek=yes
enable_cxx_exceptions=no
enable_ft_thread=no
enable_per_user_config_files=no
enable_orterun_prefix_by_default=yes
enable_mca_no_build=carto,crs,filem,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-tcp
enable_contrib_no_build=libnbc,vt
with_slurm=no
with_openib=no
with_devel_headers=yes
with_memory_manager=ptmalloc2
with_valgrind=no

90
contrib/platform/cisco/suder/optimized.conf Обычный файл
Просмотреть файл

@ -0,0 +1,90 @@
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the default system-wide MCA parameters defaults file.
# Specifically, the MCA parameter "mca_param_files" defaults to a
# value of
# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf"
# (this file is the latter of the two). So if the default value of
# mca_param_files is not changed, this file is used to set system-wide
# MCA parameters. This file can therefore be used to set system-wide
# default MCA parameters for all users. Of course, users can override
# these values if they want, but this file is an excellent location
# for setting system-specific MCA parameters for those users who don't
# know / care enough to investigate the proper values for them.
# Note that this file is only applicable where it is visible (in a
# filesystem sense). Specifically, MPI processes each read this file
# during their startup to determine what default values for MCA
# parameters should be used. mpirun does not bundle up the values in
# this file from the node where it was run and send them to all nodes;
# the default value decisions are effectively distributed. Hence,
# these values are only applicable on nodes that "see" this file. If
# $sysconf is a directory on a local disk, it is likely that changes
# to this file will need to be propagated to other nodes. If $sysconf
# is a directory that is shared via a networked filesystem, changes to
# this file will be visible to all nodes that share this $sysconf.
# The format is straightforward: one per line, mca_param_name =
# rvalue. Quoting is ignored (so if you use quotes or escape
# characters, they'll be included as part of the value). For example:
# Disable run-time MPI parameter checking
# mpi_param_check = 0
# Note that the value "~/" will be expanded to the current user's home
# directory. For example:
# Change component loading path
# component_path = /usr/local/lib/openmpi:~/my_openmpi_components
# See "ompi_info --param all all" for a full listing of Open MPI MCA
# parameters available and their default values.
#
# Basic behavior to smooth startup
mca_component_show_load_errors = 0
orte_abort_timeout = 10
opal_set_max_sys_limits = 1
## MPI behavior
## Do NOT specify mpi_leave_pinned so system
## can figure out for itself whether or not
## it is supported and usable
## Protect looped collectives
coll_sync_priority = 100
coll_sync_barrier_before = 1000
## Activate hierarchical collectives
coll_hierarch_priority = 90
## Add the interface for out-of-band communication
## and set it up
oob_tcp_listen_mode = listen_thread
oob_tcp_sndbuf = 32768
oob_tcp_rcvbuf = 32768
## Define the MPI interconnects
btl = sm,tcp,self
## Setup MPI options
mpi_show_handle_leaks = 1
mpi_warn_on_fork = 1
mpi_abort_print_stack = 1