From 89b7e20a8baeaaeb0766222f6e49833333322b3b Mon Sep 17 00:00:00 2001 From: Ralph Castain Date: Fri, 12 Jun 2009 17:50:14 +0000 Subject: [PATCH] Add some Cisco-related platform files This commit was SVN r21422. --- contrib/platform/cisco/macosx-dynamic | 21 +++++ .../platform/cisco/macosx-dynamic-optimized | 21 +++++ .../cisco/macosx-dynamic-optimized.conf | 64 +++++++++++++ contrib/platform/cisco/macosx-dynamic.conf | 64 +++++++++++++ contrib/platform/cisco/macosx-static-leopard | 22 +++++ .../platform/cisco/macosx-static-leopard.conf | 64 +++++++++++++ contrib/platform/cisco/suder/debug | 28 ++++++ contrib/platform/cisco/suder/debug.conf | 91 +++++++++++++++++++ contrib/platform/cisco/suder/optimized | 26 ++++++ contrib/platform/cisco/suder/optimized.conf | 90 ++++++++++++++++++ 10 files changed, 491 insertions(+) create mode 100644 contrib/platform/cisco/macosx-dynamic create mode 100644 contrib/platform/cisco/macosx-dynamic-optimized create mode 100644 contrib/platform/cisco/macosx-dynamic-optimized.conf create mode 100644 contrib/platform/cisco/macosx-dynamic.conf create mode 100644 contrib/platform/cisco/macosx-static-leopard create mode 100644 contrib/platform/cisco/macosx-static-leopard.conf create mode 100644 contrib/platform/cisco/suder/debug create mode 100644 contrib/platform/cisco/suder/debug.conf create mode 100644 contrib/platform/cisco/suder/optimized create mode 100644 contrib/platform/cisco/suder/optimized.conf diff --git a/contrib/platform/cisco/macosx-dynamic b/contrib/platform/cisco/macosx-dynamic new file mode 100644 index 0000000000..8a72ebaeb9 --- /dev/null +++ b/contrib/platform/cisco/macosx-dynamic @@ -0,0 +1,21 @@ +with_memory_manager=no +enable_mem_debug=yes +enable_mem_profile=no +enable_debug_symbols=yes +enable_binaries=yes +with_devel_headers=yes +enable_heterogeneous=no +enable_picky=yes +enable_debug=yes +enable_shared=yes +enable_static=no +enable_contrib_no_build=libnbc,vt +with_xgrid=no +enable_io_romio=no +enable_ipv6=no +enable_mpi_f77=no +enable_mpi_f90=no +enable_mpi_cxx=yes +enable_mpi_cxx_seek=yes +enable_memchecker=no +enable_mca_no_build=carto,crs,maffinity,memchecker,paffinity,rmaps-round_robin,rmaps-seq,rmaps-topo,rmaps-rank_file,filem,plm-slurm,plm-xgrid,snapc,routed-binomial,routed-direct,routed-linear,routed-radix,routed-slave,grpcomm-basic,grpcomm-hier,ess-hnp,ess-tool,ess-singleton,errmgr-default diff --git a/contrib/platform/cisco/macosx-dynamic-optimized b/contrib/platform/cisco/macosx-dynamic-optimized new file mode 100644 index 0000000000..bc1bf26eb4 --- /dev/null +++ b/contrib/platform/cisco/macosx-dynamic-optimized @@ -0,0 +1,21 @@ +with_memory_manager=no +enable_mem_debug=no +enable_mem_profile=no +enable_debug_symbols=no +enable_binaries=yes +with_devel_headers=yes +enable_heterogeneous=no +enable_picky=yes +enable_debug=no +enable_shared=yes +enable_static=no +enable_contrib_no_build=libnbc,vt +with_xgrid=no +enable_io_romio=no +enable_ipv6=no +enable_mpi_f77=no +enable_mpi_f90=no +enable_mpi_cxx=yes +enable_mpi_cxx_seek=yes +enable_memchecker=no +enable_mca_no_build=pml-dr,pml-crcp2,pml-cm,crcp,pml-v diff --git a/contrib/platform/cisco/macosx-dynamic-optimized.conf b/contrib/platform/cisco/macosx-dynamic-optimized.conf new file mode 100644 index 0000000000..8369140e39 --- /dev/null +++ b/contrib/platform/cisco/macosx-dynamic-optimized.conf @@ -0,0 +1,64 @@ +# +# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana +# University Research and Technology +# Corporation. All rights reserved. +# Copyright (c) 2004-2005 The University of Tennessee and The University +# of Tennessee Research Foundation. All rights +# reserved. +# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, +# University of Stuttgart. All rights reserved. +# Copyright (c) 2004-2005 The Regents of the University of California. +# All rights reserved. +# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. +# $COPYRIGHT$ +# +# Additional copyrights may follow +# +# $HEADER$ +# + +# This is the default system-wide MCA parameters defaults file. +# Specifically, the MCA parameter "mca_param_files" defaults to a +# value of +# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" +# (this file is the latter of the two). So if the default value of +# mca_param_files is not changed, this file is used to set system-wide +# MCA parameters. This file can therefore be used to set system-wide +# default MCA parameters for all users. Of course, users can override +# these values if they want, but this file is an excellent location +# for setting system-specific MCA parameters for those users who don't +# know / care enough to investigate the proper values for them. + +# Note that this file is only applicable where it is visible (in a +# filesystem sense). Specifically, MPI processes each read this file +# during their startup to determine what default values for MCA +# parameters should be used. mpirun does not bundle up the values in +# this file from the node where it was run and send them to all nodes; +# the default value decisions are effectively distributed. Hence, +# these values are only applicable on nodes that "see" this file. If +# $sysconf is a directory on a local disk, it is likely that changes +# to this file will need to be propagated to other nodes. If $sysconf +# is a directory that is shared via a networked filesystem, changes to +# this file will be visible to all nodes that share this $sysconf. + +# The format is straightforward: one per line, mca_param_name = +# rvalue. Quoting is ignored (so if you use quotes or escape +# characters, they'll be included as part of the value). For example: + +# Disable run-time MPI parameter checking +# mpi_param_check = 0 + +# Note that the value "~/" will be expanded to the current user's home +# directory. For example: + +# Change component loading path +# component_path = /usr/local/lib/openmpi:~/my_openmpi_components + +# See "ompi_info --param all all" for a full listing of Open MPI MCA +# parameters available and their default values. +# + +# Basic behavior to smooth startup +mca_component_show_load_errors = 0 +orte_abort_timeout = 10 + diff --git a/contrib/platform/cisco/macosx-dynamic.conf b/contrib/platform/cisco/macosx-dynamic.conf new file mode 100644 index 0000000000..8369140e39 --- /dev/null +++ b/contrib/platform/cisco/macosx-dynamic.conf @@ -0,0 +1,64 @@ +# +# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana +# University Research and Technology +# Corporation. All rights reserved. +# Copyright (c) 2004-2005 The University of Tennessee and The University +# of Tennessee Research Foundation. All rights +# reserved. +# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, +# University of Stuttgart. All rights reserved. +# Copyright (c) 2004-2005 The Regents of the University of California. +# All rights reserved. +# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. +# $COPYRIGHT$ +# +# Additional copyrights may follow +# +# $HEADER$ +# + +# This is the default system-wide MCA parameters defaults file. +# Specifically, the MCA parameter "mca_param_files" defaults to a +# value of +# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" +# (this file is the latter of the two). So if the default value of +# mca_param_files is not changed, this file is used to set system-wide +# MCA parameters. This file can therefore be used to set system-wide +# default MCA parameters for all users. Of course, users can override +# these values if they want, but this file is an excellent location +# for setting system-specific MCA parameters for those users who don't +# know / care enough to investigate the proper values for them. + +# Note that this file is only applicable where it is visible (in a +# filesystem sense). Specifically, MPI processes each read this file +# during their startup to determine what default values for MCA +# parameters should be used. mpirun does not bundle up the values in +# this file from the node where it was run and send them to all nodes; +# the default value decisions are effectively distributed. Hence, +# these values are only applicable on nodes that "see" this file. If +# $sysconf is a directory on a local disk, it is likely that changes +# to this file will need to be propagated to other nodes. If $sysconf +# is a directory that is shared via a networked filesystem, changes to +# this file will be visible to all nodes that share this $sysconf. + +# The format is straightforward: one per line, mca_param_name = +# rvalue. Quoting is ignored (so if you use quotes or escape +# characters, they'll be included as part of the value). For example: + +# Disable run-time MPI parameter checking +# mpi_param_check = 0 + +# Note that the value "~/" will be expanded to the current user's home +# directory. For example: + +# Change component loading path +# component_path = /usr/local/lib/openmpi:~/my_openmpi_components + +# See "ompi_info --param all all" for a full listing of Open MPI MCA +# parameters available and their default values. +# + +# Basic behavior to smooth startup +mca_component_show_load_errors = 0 +orte_abort_timeout = 10 + diff --git a/contrib/platform/cisco/macosx-static-leopard b/contrib/platform/cisco/macosx-static-leopard new file mode 100644 index 0000000000..08ad84079f --- /dev/null +++ b/contrib/platform/cisco/macosx-static-leopard @@ -0,0 +1,22 @@ +with_memory_manager=no +enable_mem_debug=yes +enable_mem_profile=no +enable_debug_symbols=yes +enable_binaries=yes +with_devel_headers=yes +enable_heterogeneous=no +enable_picky=yes +enable_debug=yes +enable_shared=no +enable_static=yes +with_wrapper_ldflags=-Wl,-search_paths_first +enable_contrib_no_build=libnbc,vt +with_xgrid=no +enable_io_romio=no +enable_memchecker=no +enable_ipv6=no +enable_mpi_f77=no +enable_mpi_f90=no +enable_mpi_cxx=yes +enable_mpi_cxx_seek=yes +enable_mca_no_build=pml-dr,pml-crcp2,crcp,pml-v,pml-cm diff --git a/contrib/platform/cisco/macosx-static-leopard.conf b/contrib/platform/cisco/macosx-static-leopard.conf new file mode 100644 index 0000000000..8369140e39 --- /dev/null +++ b/contrib/platform/cisco/macosx-static-leopard.conf @@ -0,0 +1,64 @@ +# +# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana +# University Research and Technology +# Corporation. All rights reserved. +# Copyright (c) 2004-2005 The University of Tennessee and The University +# of Tennessee Research Foundation. All rights +# reserved. +# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, +# University of Stuttgart. All rights reserved. +# Copyright (c) 2004-2005 The Regents of the University of California. +# All rights reserved. +# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. +# $COPYRIGHT$ +# +# Additional copyrights may follow +# +# $HEADER$ +# + +# This is the default system-wide MCA parameters defaults file. +# Specifically, the MCA parameter "mca_param_files" defaults to a +# value of +# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" +# (this file is the latter of the two). So if the default value of +# mca_param_files is not changed, this file is used to set system-wide +# MCA parameters. This file can therefore be used to set system-wide +# default MCA parameters for all users. Of course, users can override +# these values if they want, but this file is an excellent location +# for setting system-specific MCA parameters for those users who don't +# know / care enough to investigate the proper values for them. + +# Note that this file is only applicable where it is visible (in a +# filesystem sense). Specifically, MPI processes each read this file +# during their startup to determine what default values for MCA +# parameters should be used. mpirun does not bundle up the values in +# this file from the node where it was run and send them to all nodes; +# the default value decisions are effectively distributed. Hence, +# these values are only applicable on nodes that "see" this file. If +# $sysconf is a directory on a local disk, it is likely that changes +# to this file will need to be propagated to other nodes. If $sysconf +# is a directory that is shared via a networked filesystem, changes to +# this file will be visible to all nodes that share this $sysconf. + +# The format is straightforward: one per line, mca_param_name = +# rvalue. Quoting is ignored (so if you use quotes or escape +# characters, they'll be included as part of the value). For example: + +# Disable run-time MPI parameter checking +# mpi_param_check = 0 + +# Note that the value "~/" will be expanded to the current user's home +# directory. For example: + +# Change component loading path +# component_path = /usr/local/lib/openmpi:~/my_openmpi_components + +# See "ompi_info --param all all" for a full listing of Open MPI MCA +# parameters available and their default values. +# + +# Basic behavior to smooth startup +mca_component_show_load_errors = 0 +orte_abort_timeout = 10 + diff --git a/contrib/platform/cisco/suder/debug b/contrib/platform/cisco/suder/debug new file mode 100644 index 0000000000..c43d915aa1 --- /dev/null +++ b/contrib/platform/cisco/suder/debug @@ -0,0 +1,28 @@ +enable_dlopen=no +enable_mem_debug=yes +enable_mem_profile=yes +enable_memchecker=yes +enable_debug_symbols=yes +enable_binaries=yes +enable_heterogeneous=no +enable_picky=yes +enable_debug=yes +enable_shared=yes +enable_static=yes +enable_ipv6=no +enable_mpi_f77=no +enable_mpi_f90=no +enable_mpi_cxx=yes +enable_mpi_cxx_seek=yes +enable_cxx_exceptions=yes +enable_ft_thread=no +enable_per_user_config_files=no +enable_orterun_prefix_by_default=yes +enable_io_romio=no +enable_mca_no_build=carto,crs,filem,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm +enable_contrib_no_build=libnbc,vt +with_slurm=no +with_openib=no +with_devel_headers=yes +with_memory_manager=ptmalloc2 +with_valgrind=no diff --git a/contrib/platform/cisco/suder/debug.conf b/contrib/platform/cisco/suder/debug.conf new file mode 100644 index 0000000000..ab47f06eb8 --- /dev/null +++ b/contrib/platform/cisco/suder/debug.conf @@ -0,0 +1,91 @@ +# +# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana +# University Research and Technology +# Corporation. All rights reserved. +# Copyright (c) 2004-2005 The University of Tennessee and The University +# of Tennessee Research Foundation. All rights +# reserved. +# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, +# University of Stuttgart. All rights reserved. +# Copyright (c) 2004-2005 The Regents of the University of California. +# All rights reserved. +# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. +# $COPYRIGHT$ +# +# Additional copyrights may follow +# +# $HEADER$ +# + +# This is the default system-wide MCA parameters defaults file. +# Specifically, the MCA parameter "mca_param_files" defaults to a +# value of +# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" +# (this file is the latter of the two). So if the default value of +# mca_param_files is not changed, this file is used to set system-wide +# MCA parameters. This file can therefore be used to set system-wide +# default MCA parameters for all users. Of course, users can override +# these values if they want, but this file is an excellent location +# for setting system-specific MCA parameters for those users who don't +# know / care enough to investigate the proper values for them. + +# Note that this file is only applicable where it is visible (in a +# filesystem sense). Specifically, MPI processes each read this file +# during their startup to determine what default values for MCA +# parameters should be used. mpirun does not bundle up the values in +# this file from the node where it was run and send them to all nodes; +# the default value decisions are effectively distributed. Hence, +# these values are only applicable on nodes that "see" this file. If +# $sysconf is a directory on a local disk, it is likely that changes +# to this file will need to be propagated to other nodes. If $sysconf +# is a directory that is shared via a networked filesystem, changes to +# this file will be visible to all nodes that share this $sysconf. + +# The format is straightforward: one per line, mca_param_name = +# rvalue. Quoting is ignored (so if you use quotes or escape +# characters, they'll be included as part of the value). For example: + +# Disable run-time MPI parameter checking +# mpi_param_check = 0 + +# Note that the value "~/" will be expanded to the current user's home +# directory. For example: + +# Change component loading path +# component_path = /usr/local/lib/openmpi:~/my_openmpi_components + +# See "ompi_info --param all all" for a full listing of Open MPI MCA +# parameters available and their default values. +# + +# Basic behavior to smooth startup +mca_component_show_load_errors = 0 +orte_abort_timeout = 10 +opal_set_max_sys_limits = 1 + +## MPI behavior +## Do NOT specify mpi_leave_pinned so system +## can figure out for itself whether or not +## it is supported and usable + +## Protect looped collectives +coll_sync_priority = 100 +coll_sync_barrier_before = 1000 + +## Activate hierarchical collectives +coll_hierarch_priority = 90 + +## Add the interface for out-of-band communication +## and set it up +oob_tcp_listen_mode = listen_thread +oob_tcp_sndbuf = 32768 +oob_tcp_rcvbuf = 32768 + +## Define the MPI interconnects +btl = sm,tcp,self + +## Setup MPI options +mpi_show_handle_leaks = 1 +mpi_warn_on_fork = 1 +mpi_abort_print_stack = 1 + diff --git a/contrib/platform/cisco/suder/optimized b/contrib/platform/cisco/suder/optimized new file mode 100644 index 0000000000..f14d9a4971 --- /dev/null +++ b/contrib/platform/cisco/suder/optimized @@ -0,0 +1,26 @@ +enable_dlopen=no +enable_mem_debug=no +enable_mem_profile=no +enable_memchecker=no +enable_debug_symbols=no +enable_binaries=yes +enable_heterogeneous=no +enable_debug=no +enable_shared=yes +enable_static=yes +enable_ipv6=no +enable_mpi_f77=no +enable_mpi_f90=no +enable_mpi_cxx=yes +enable_mpi_cxx_seek=yes +enable_cxx_exceptions=no +enable_ft_thread=no +enable_per_user_config_files=no +enable_orterun_prefix_by_default=yes +enable_mca_no_build=carto,crs,filem,routed-linear,snapc,pml-dr,pml-crcp2,pml-crcpw,pml-v,pml-example,crcp,pml-cm,btl-tcp +enable_contrib_no_build=libnbc,vt +with_slurm=no +with_openib=no +with_devel_headers=yes +with_memory_manager=ptmalloc2 +with_valgrind=no diff --git a/contrib/platform/cisco/suder/optimized.conf b/contrib/platform/cisco/suder/optimized.conf new file mode 100644 index 0000000000..923a3c9e1a --- /dev/null +++ b/contrib/platform/cisco/suder/optimized.conf @@ -0,0 +1,90 @@ +# +# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana +# University Research and Technology +# Corporation. All rights reserved. +# Copyright (c) 2004-2005 The University of Tennessee and The University +# of Tennessee Research Foundation. All rights +# reserved. +# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, +# University of Stuttgart. All rights reserved. +# Copyright (c) 2004-2005 The Regents of the University of California. +# All rights reserved. +# Copyright (c) 2006 Cisco Systems, Inc. All rights reserved. +# $COPYRIGHT$ +# +# Additional copyrights may follow +# +# $HEADER$ +# + +# This is the default system-wide MCA parameters defaults file. +# Specifically, the MCA parameter "mca_param_files" defaults to a +# value of +# "$HOME/.openmpi/mca-params.conf:$sysconf/openmpi-mca-params.conf" +# (this file is the latter of the two). So if the default value of +# mca_param_files is not changed, this file is used to set system-wide +# MCA parameters. This file can therefore be used to set system-wide +# default MCA parameters for all users. Of course, users can override +# these values if they want, but this file is an excellent location +# for setting system-specific MCA parameters for those users who don't +# know / care enough to investigate the proper values for them. + +# Note that this file is only applicable where it is visible (in a +# filesystem sense). Specifically, MPI processes each read this file +# during their startup to determine what default values for MCA +# parameters should be used. mpirun does not bundle up the values in +# this file from the node where it was run and send them to all nodes; +# the default value decisions are effectively distributed. Hence, +# these values are only applicable on nodes that "see" this file. If +# $sysconf is a directory on a local disk, it is likely that changes +# to this file will need to be propagated to other nodes. If $sysconf +# is a directory that is shared via a networked filesystem, changes to +# this file will be visible to all nodes that share this $sysconf. + +# The format is straightforward: one per line, mca_param_name = +# rvalue. Quoting is ignored (so if you use quotes or escape +# characters, they'll be included as part of the value). For example: + +# Disable run-time MPI parameter checking +# mpi_param_check = 0 + +# Note that the value "~/" will be expanded to the current user's home +# directory. For example: + +# Change component loading path +# component_path = /usr/local/lib/openmpi:~/my_openmpi_components + +# See "ompi_info --param all all" for a full listing of Open MPI MCA +# parameters available and their default values. +# + +# Basic behavior to smooth startup +mca_component_show_load_errors = 0 +orte_abort_timeout = 10 +opal_set_max_sys_limits = 1 + +## MPI behavior +## Do NOT specify mpi_leave_pinned so system +## can figure out for itself whether or not +## it is supported and usable + +## Protect looped collectives +coll_sync_priority = 100 +coll_sync_barrier_before = 1000 + +## Activate hierarchical collectives +coll_hierarch_priority = 90 + +## Add the interface for out-of-band communication +## and set it up +oob_tcp_listen_mode = listen_thread +oob_tcp_sndbuf = 32768 +oob_tcp_rcvbuf = 32768 + +## Define the MPI interconnects +btl = sm,tcp,self + +## Setup MPI options +mpi_show_handle_leaks = 1 +mpi_warn_on_fork = 1 +mpi_abort_print_stack = 1