Misc. trivial typos

Found via `codespell -q 3`

Signed-off-by: luz paz <luzpaz@users.noreply.github.com>

README

@@ -598,7 +598,7 @@ Network Support
 - There are four main MPI network models available: "ob1", "cm",
   "yalla", and "ucx".  "ob1" uses BTL ("Byte Transfer Layer")
   components for each supported network.  "cm" uses MTL ("Matching
-  Tranport Layer") components for each supported network.  "yalla"
+  Transport Layer") components for each supported network.  "yalla"
   uses the Mellanox MXM transport.  "ucx" uses the OpenUCX transport.
 
   - "ob1" supports a variety of networks that can be used in

README.JAVA.txt

@@ -257,7 +257,7 @@ Specifying offsets in buffers
 
 In a C program, it is common to specify an offset in a array with
 "&array[i]" or "array+i", for instance to send data starting from
-a given positon in the array. The equivalent form in the Java bindings
+a given position in the array. The equivalent form in the Java bindings
 is to "slice()" the buffer to start at an offset. Making a "slice()"
 on a buffer is only necessary, when the offset is not zero. Slices
 work for both arrays and direct buffers.

VERSION

@@ -52,7 +52,7 @@ date="Unreleased developer copy"
 # The shared library version of each of Open MPI's public libraries.
 # These versions are maintained in accordance with the "Library
 # Interface Versions" chapter from the GNU Libtool documentation.  The
-# first Open MPI release to programatically specify these versions was
+# first Open MPI release to programmatically specify these versions was
 # v1.3.4 (note that Libtool defaulted all prior releases to 0:0:0).
 # All changes in these version numbers are dictated by the Open MPI
 # release managers (not individual developers).  Notes:

autogen.pl

@@ -915,7 +915,7 @@ sub patch_autotools_output {
     # Patch ltmain.sh error for PGI version numbers.  Redirect stderr to
     # /dev/null because this patch is only necessary for some versions of
     # Libtool (e.g., 2.2.6b); it'll [rightfully] fail if you have a new
-    # enough Libtool that dosn't need this patch.  But don't alarm the
+    # enough Libtool that doesn't need this patch.  But don't alarm the
     # user and make them think that autogen failed if this patch fails --
     # make the errors be silent.
     # Also patch ltmain.sh for NAG compiler
@@ -935,7 +935,7 @@ sub patch_autotools_output {
     my @verbose_out;
 
     # Total ugh.  We have to patch the configure script itself.  See below
-    # for explainations why.
+    # for explanations why.
     open(IN, "configure") || my_die "Can't open configure";
     my $c;
     $c .= $_

config/ompi_configure_options.m4

@@ -75,7 +75,7 @@ else
     GROUP_SPARSE=0
 fi
 AC_DEFINE_UNQUOTED([OMPI_GROUP_SPARSE],$GROUP_SPARSE,
-    [Wether we want sparse process groups])
+    [Whether we want sparse process groups])
 
 
 #

config/ompi_cxx_have_exceptions.m4

@@ -22,7 +22,7 @@ AC_DEFUN([OMPI_CXX_HAVE_EXCEPTIONS],[
 #
 # Arguments: None
 #
-# Depdencies: None
+# Dependencies: None
 #
 # Check to see if the C++ compiler can handle exceptions
 #

config/ompi_fortran_check_f08_assumed_rank.m4

@@ -54,7 +54,7 @@ AC_DEFUN([_OMPI_FORTRAN_CHECK_F08_ASSUMED_RANK], [
 
     AS_VAR_SET(fortran_f08_assumed_rank, [$happy]);
 
-    # Now put the orignal CACHE_CHECK MSG_CHECKING back so that it can
+    # Now put the original CACHE_CHECK MSG_CHECKING back so that it can
     # output the MSG_RESULT.
     AC_MSG_CHECKING([Fortran compiler F08 assumed rank syntax])
     OPAL_VAR_SCOPE_POP

config/ompi_fortran_check_ignore_tkr.m4

@@ -112,7 +112,7 @@ AC_DEFUN([_OMPI_FORTRAN_CHECK_IGNORE_TKR], [
     AS_VAR_SET(fortran_ignore_tkr_data,
                [${happy}:${ompi_fortran_ignore_tkr_type}:${ompi_fortran_ignore_tkr_predecl}])
 
-    # Now put the orignal CACHE_CHECK MSG_CHECKING back so that it can
+    # Now put the original CACHE_CHECK MSG_CHECKING back so that it can
     # output the MSG_RESULT.
     AC_MSG_CHECKING([Fortran compiler ignore TKR syntax])
     OPAL_VAR_SCOPE_POP

config/opal_check_cray_pmi.m4

@@ -52,11 +52,11 @@ AC_DEFUN([OPAL_CHECK_CRAY_PMI_EXPLICIT],[
 #
     AS_IF([test "$enable_static" = "yes"],
           [AS_IF([test -d /usr/lib/alps],
-                 [AC_MSG_RESULT([Detected presense of /usr/lib/alps])
+                 [AC_MSG_RESULT([Detected presence of /usr/lib/alps])
                   CRAY_PMI_LDFLAGS="$CRAY_PMI_LDFLAGS -L/usr/lib/alps -lalpslli -lalpsutil"
                   CRAY_PMI_LIBS="$CRAY_PMI_LIBS -L/usr/lib/alps -lalpslli -lalpsutil"],
                  [AS_IF([test -d /opt/cray/xe-sysroot/default/usr/lib/alps],
-                        [AC_MSG_RESULT([Detected presense of /opt/cray/xe-sysroot/default/usr/lib/alps])
+                        [AC_MSG_RESULT([Detected presence of /opt/cray/xe-sysroot/default/usr/lib/alps])
                          CRAY_PMI_LDFLAGS="$CRAY_PMI_LDFLAGS -L/opt/cray/xe-sysroot/default/usr/lib/alps -lalpslli -lalpsutil"
                          CRAY_PMI_LIBS="$CRAY_PMI_LIBS -L/opt/cray/xe-sysroot/default/usr/lib/alps -lalpslli -lalpsutil"],
                         [AC_MSG_ERROR([Requested enabling static linking but unable to local libalpslli and libalpsutil])])

config/opal_check_openfabrics.m4

@@ -57,7 +57,7 @@ AC_DEFUN([OPAL_CHECK_OPENFABRICS],[
             # Enable padding for SPARC platforms by default  because the
             # btl will segv otherwise.  Keep padding disabled for other
             # platforms since there are some performance implications with
-            #  padding on for those plaforms.
+            #  padding on for those platforms.
             #
             case "${host}" in
 		sparc*)

config/opal_check_os_flavors.m4

@@ -22,7 +22,7 @@ AC_DEFUN([OPAL_CHECK_OS_FLAVOR_SPECIFIC],
     AC_MSG_CHECKING([$1])
     AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
      [[#ifndef $1
-      error: this isnt $1
+      error: this is not $1
       #endif
      ]])],
                       [opal_found_$2=yes],

config/opal_check_package.m4

@@ -186,7 +186,7 @@ dnl * library_name / function_name: check for function function_name in
 dnl   -llibrary_name.  Specifically, for library_name, use the "foo" form,
 dnl   as opposed to "libfoo".
 dnl * extra_libraries: if the library_name you are checking for requires
-dnl   additonal -l arguments to link successfully, list them here.
+dnl   additional -l arguments to link successfully, list them here.
 dnl * dir_prefix: if the header/library is located in a non-standard
 dnl   location (e.g., /opt/foo as opposed to /usr), list it here
 dnl * libdir_prefix: if the library is not under $dir_prefix/lib or

config/opal_check_pthread_pids.m4

@@ -69,7 +69,7 @@ void *checkpid(void *arg) {
 [MSG=no OPAL_THREADS_HAVE_DIFFERENT_PIDS=0],
 [MSG=yes OPAL_THREADS_HAVE_DIFFERENT_PIDS=1],
 [
- # If we're cross compiling, we can't do another AC_* function here beause
+ # If we're cross compiling, we can't do another AC_* function here because
  # it we haven't displayed the result from the last one yet.  So defer
  # another test until below.
  OPAL_THREADS_HAVE_DIFFERENT_PIDS=

config/opal_config_asm.m4

@@ -532,7 +532,7 @@ dnl OPAL_CHECK_ASM_TYPE
 dnl
 dnl Sets OPAL_ASM_TYPE to the prefix for the function type to
 dnl set a symbol's type as function (needed on ELF for shared
-dnl libaries).  If no .type directive is needed, sets OPAL_ASM_TYPE
+dnl libraries).  If no .type directive is needed, sets OPAL_ASM_TYPE
 dnl to an empty string
 dnl
 dnl We look for @ \# %
@@ -831,7 +831,7 @@ dnl
 dnl Check if the compiler is capable of doing GCC-style inline
 dnl assembly.  Some compilers emit a warning and ignore the inline
 dnl assembly (xlc on OS X) and compile without error.  Therefore,
-dnl the test attempts to run the emited code to check that the
+dnl the test attempts to run the emitted code to check that the
 dnl assembly is actually run.  To run this test, one argument to
 dnl the macro must be an assembly instruction in gcc format to move
 dnl the value 0 into the register containing the variable ret.

config/opal_configure_options.m4

@@ -402,7 +402,7 @@ AM_CONDITIONAL([OPAL_WANT_SCRIPT_WRAPPER_COMPILERS], [test "$enable_script_wrapp
 #
 AC_ARG_ENABLE([per-user-config-files],
    [AC_HELP_STRING([--enable-per-user-config-files],
-      [Disable per-user configuration files, to save disk accesses during job start-up.  This is likely desirable for large jobs.  Note that this can also be acheived by environment variables at run-time.  (default: enabled)])])
+      [Disable per-user configuration files, to save disk accesses during job start-up.  This is likely desirable for large jobs.  Note that this can also be achieved by environment variables at run-time.  (default: enabled)])])
 if test "$enable_per_user_config_files" = "no" ; then
   result=0
 else

config/opal_functions.m4

@@ -42,7 +42,7 @@ dnl
 AC_DEFUN([OPAL_CONFIGURE_SETUP],[
 
 # Some helper script functions.  Unfortunately, we cannot use $1 kinds
-# of arugments here because of the m4 substitution.  So we have to set
+# of arguments here because of the m4 substitution.  So we have to set
 # special variable names before invoking the function.  :-\
 
 opal_show_title() {
@@ -322,7 +322,7 @@ dnl #######################################################################
 # OPAL_APPEND_UNIQ(variable, new_argument)
 # ----------------------------------------
 # Append new_argument to variable if not already in variable.  This assumes a
-# space seperated list.
+# space separated list.
 #
 # This could probably be made more efficient :(.
 AC_DEFUN([OPAL_APPEND_UNIQ], [
@@ -453,7 +453,7 @@ dnl #######################################################################
 # - the argument does not begin with -I, -L, or -l, or
 # - the argument begins with -I, -L, or -l, and it's not already in variable
 #
-# This macro assumes a space seperated list.
+# This macro assumes a space separated list.
 AC_DEFUN([OPAL_FLAGS_APPEND_UNIQ], [
     OPAL_VAR_SCOPE_PUSH([opal_tmp opal_append])
 
@@ -649,7 +649,7 @@ AC_DEFUN([OPAL_COMPUTE_MAX_VALUE], [
                     overflow=1
                 fi
             else
-                # stil negative.  Time to give up.
+                # still negative.  Time to give up.
                 overflow=1
             fi
             opal_num_bits=0

config/opal_mca.m4

@@ -226,7 +226,7 @@ AC_DEFUN([OPAL_MCA],[
     # of the hard stuff is in here
     MCA_PROJECT_SUBDIRS=
     m4_foreach(mca_project, [mca_project_list],
-               [# BWB: Until projects have seperate configure scripts
+               [# BWB: Until projects have separate configure scripts
                 # and can skip running all of ORTE, just avoid recursing
                 # into orte sub directory if orte disabled
                 if (test "mca_project" = "ompi" && test "$enable_mpi" != "no") || test "mca_project" = "opal" || test "mca_project" = "orte" || test "mca_project" = "oshmem"; then

config/opal_setup_wrappers.m4

@@ -68,7 +68,7 @@ AC_DEFUN([OPAL_WRAPPER_FLAGS_ADD], [
 # That is, a component may not influence CFLAGS, CXXFLAGS, or FCFLAGS.
 #
 # Notes:
-#   * Keep user flags seperate as 1) they should have no influence
+#   * Keep user flags separate as 1) they should have no influence
 #     over build and 2) they don't go through the uniqification we do
 #     with the other wrapper compiler options
 #   * While the user (the person who runs configure) is allowed to set

config/oshmem_configure_options.m4

@@ -153,7 +153,7 @@ fi
 
 #
 # We can't set am_conditional here since it's yet unknown if there is
-# valid Fortran compiler avaliable
+# valid Fortran compiler available
 #
 
 ]) dnl

config/pkg.m4

@@ -53,7 +53,7 @@ fi[]dnl
 # to PKG_CHECK_MODULES(), but does not set variables or print errors.
 #
 # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
+# only at the first occurrence in configure.ac, so if the first place
 # it's called might be skipped (such as if it is within an "if", you
 # have to call PKG_CHECK_EXISTS manually
 # --------------------------------------------------------------

test/carto/carto-file

@@ -20,7 +20,7 @@
   NODE               Ethernet                  eth1
 #
 #
-# Connection decleration  From node   To node:weight   To node:weight   ......
+# Connection declaration  From node   To node:weight   To node:weight   ......
 # (Reserve word)          (declered   (declered        (declered
 #                          above)      above)           above)
 #===============================================================================================

test/carto/carto_test.c

@@ -56,13 +56,13 @@ main(int argc, char* argv[])
         opal_graph_print(graph);
         slot0 = opal_carto_base_find_node(graph, "slot0");
         if (NULL == slot0) {
-            opal_output(0,"couldnt find slot0 in the graph exiting\n");
+            opal_output(0,"couldn't find slot0 in the graph exiting\n");
             opal_carto_base_free_graph(graph);
             return -1;
         }
         end_node = opal_carto_base_find_node(graph, "slot3");
         if (NULL == end_node) {
-            opal_output(0,"couldnt find mthca1 in the graph exiting\n");
+            opal_output(0,"couldn't find mthca1 in the graph exiting\n");
             opal_carto_base_free_graph(graph);
             return -1;
         }
@@ -87,13 +87,13 @@ main(int argc, char* argv[])
         opal_graph_print(graph);
         slot0 = opal_carto_base_find_node(graph, "slot0");
         if (NULL == slot0) {
-            opal_output(0,"couldnt find slot0 in the graph exiting\n");
+            opal_output(0,"couldn't find slot0 in the graph exiting\n");
             opal_carto_base_free_graph(graph);
             return -1;
         }
         end_node = opal_carto_base_find_node(graph, "mthca1");
         if (NULL == end_node) {
-            opal_output(0,"couldnt find mthca1 in the graph exiting\n");
+            opal_output(0,"couldn't find mthca1 in the graph exiting\n");
             opal_carto_base_free_graph(graph);
             return -1;
         }
@@ -118,13 +118,13 @@ main(int argc, char* argv[])
         opal_graph_print(graph);
         slot0 = opal_carto_base_find_node(graph, "slot0");
         if (NULL == slot0) {
-            opal_output(0,"couldnt find slot0 in the graph exiting\n");
+            opal_output(0,"couldn't find slot0 in the graph exiting\n");
             opal_carto_base_free_graph(graph);
             return -1;
         }
         end_node = opal_carto_base_find_node(graph, "eth1");
         if (NULL == end_node) {
-            opal_output(0,"couldnt find mthca1 in the graph exiting\n");
+            opal_output(0,"couldn't find mthca1 in the graph exiting\n");
             opal_carto_base_free_graph(graph);
             return -1;
         }
@@ -149,13 +149,13 @@ main(int argc, char* argv[])
         opal_graph_print(graph);
         slot0 = opal_carto_base_find_node(graph, "slot0");
         if (NULL == slot0) {
-            opal_output(0,"couldnt find slot0 in the graph exiting\n");
+            opal_output(0,"couldn't find slot0 in the graph exiting\n");
             opal_carto_base_free_graph(graph);
             return -1;
         }
         end_node = opal_carto_base_find_node(graph, "mem3");
         if (NULL == end_node) {
-            opal_output(0,"couldnt find mthca1 in the graph exiting\n");
+            opal_output(0,"couldn't find mthca1 in the graph exiting\n");
             opal_carto_base_free_graph(graph);
             return -1;
         }

test/class/opal_pointer_array.c

@@ -71,7 +71,7 @@ static void test(bool thread_usage){
     if( (array->size - array->number_free) == test_len_in_array) {
         test_success();
     } else {
-        test_failure("check on number of elments in array");
+        test_failure("check on number of elements in array");
     }
 
     /* check order of data */

test/datatype/checksum.c

@@ -115,7 +115,7 @@ int main( int argc, char* argv[] )
     OBJ_RELEASE(convertor);
 
     /**
-     * The datatype is not usefull anymore
+     * The datatype is not useful anymore
      */
     OBJ_RELEASE(sparse);
 

test/datatype/ddt_lib.c

@@ -418,7 +418,7 @@ ompi_datatype_t* test_contiguous( void )
 {
     ompi_datatype_t *pdt, *pdt1, *pdt2;
 
-    printf( "test contiguous (alignement)\n" );
+    printf( "test contiguous (alignment)\n" );
     ompi_datatype_create_contiguous(0, &ompi_mpi_datatype_null.dt, &pdt1);
     ompi_datatype_add( pdt1, &ompi_mpi_double.dt, 1, 0, -1 );
     if( outputFlags & DUMP_DATA_AFTER_COMMIT ) {

test/datatype/opal_datatype_test.c

@@ -187,7 +187,7 @@ static int local_copy_ddt_count( opal_datatype_t const * const pdt, int count )
             }
         }
         if( 0 == errors ) {
-            printf("Validation check succesfully passed\n");
+            printf("Validation check successfully passed\n");
         } else {
             printf("Found %d errors. Giving up!\n", errors);
             exit(-1);
@@ -473,7 +473,7 @@ static int local_copy_with_convertor( opal_datatype_t const * const pdt, int cou
             }
         }
         if( 0 == errors ) {
-            printf("Validation check succesfully passed\n");
+            printf("Validation check successfully passed\n");
         } else {
             printf("Found %d errors. Giving up!\n", errors);
             exit(-1);

test/datatype/opal_ddt_lib.c

@@ -611,7 +611,7 @@ opal_datatype_t* test_contiguous( void )
 {
     opal_datatype_t *pdt, *pdt1, *pdt2;
 
-    printf( "test contiguous (alignement)\n" );
+    printf( "test contiguous (alignment)\n" );
     opal_datatype_create_contiguous(0, &opal_datatype_empty, &pdt1);
     opal_datatype_add( pdt1, &opal_datatype_float8, 1, 0, -1 );
     if( outputFlags & DUMP_DATA_AFTER_COMMIT ) {

test/event/event-test.c

@@ -123,10 +123,10 @@ main (int argc, char **argv)
 
 	fprintf(stderr, "Write data to %s\n", fifo);
 #endif
-	/* Initalize the event library */
+	/* Initialize the event library */
 	opal_init();
 
-	/* Initalize one event */
+	/* Initialize one event */
 #ifdef WIN32
 	opal_event.set(opal_event_base, &evfifo, (int)socket, OPAL_EV_READ, fifo_read, &evfifo);
 #else

test/event/signal-test.c

@@ -50,10 +50,10 @@ main (int argc, char **argv)
 {
     opal_event_t signal_int, signal_term;
 
-	/* Initalize the event library */
+	/* Initialize the event library */
 	opal_init();
 
-	/* Initalize one event */
+	/* Initialize one event */
 	opal_event.set(opal_event_base, &signal_term, SIGUSR1, OPAL_EV_SIGNAL|OPAL_EV_PERSIST, signal_cb,
 	    &signal_term);
 	opal_event.set(opal_event_base, &signal_int, SIGUSR2, OPAL_EV_SIGNAL|OPAL_EV_PERSIST, signal_cb,

test/event/time-test.c

@@ -52,10 +52,10 @@ main (int argc, char **argv)
 	opal_event_t timeout;
 	struct timeval tv;
 
-	/* Initalize the event library */
+	/* Initialize the event library */
 	opal_event_init();
 
-	/* Initalize one event */
+	/* Initialize one event */
 	opal_evtimer_set(&timeout, timeout_cb, &timeout);
 
 	timerclear(&tv);

test/monitoring/monitoring_test.c

@@ -302,7 +302,7 @@ int main(int argc, char* argv[])
       if( rank%2 ) {
         MPI_Win_post(distant_group, 0, win);
         MPI_Win_wait(win);
-        /* Check recieved values */
+        /* Check received values */
         for( int v = 0; v < 10240; ++v )
 	  if( from != win_buff[v] ) {
 	    printf("Error on checking exchanged values: win_buff[%d] == %d instead of %d\n",
@@ -327,7 +327,7 @@ int main(int argc, char* argv[])
 
       MPI_Barrier(MPI_COMM_WORLD);
 
-      /* Check recieved values */
+      /* Check received values */
       for( int v = 0; v < 10240; ++v )
         if( from != win_buff[v] ) {
 	  printf("Error on checking exchanged values: win_buff[%d] == %d instead of %d\n",

test/monitoring/test_overhead.sh

@@ -24,7 +24,7 @@
 # This file create as an output one heatmap per operation
 # tested. Currently, tested operations are :
 #   - MPI_Send (software overhead)
-#   - MPI_Send (ping-pong, to measure theoverhead with the communciation time)
+#   - MPI_Send (ping-pong, to measure the overhead with the communication time)
 #   - MPI_Bcast
 #   - MPI_Alltoall
 #   - MPI_Put

test/mpi/environment/run_tests

@@ -3,7 +3,7 @@
 #  ====
 #  run script for mpi environment tests
 
-# Arguements
+# Arguments
 # ==========
 #
 # test_list  =  no args or all runs all tests

test/mpi/run_tests

@@ -3,7 +3,7 @@
 #  ====
 #  run script for mpi tests
 
-# Arguements
+# Arguments
 # ==========
 #
 # test_list  =  no args or all runs all tests