diff --git a/README b/README index 153d423ec8..4085f8144d 100644 --- a/README +++ b/README @@ -598,7 +598,7 @@ Network Support - There are four main MPI network models available: "ob1", "cm", "yalla", and "ucx". "ob1" uses BTL ("Byte Transfer Layer") components for each supported network. "cm" uses MTL ("Matching - Tranport Layer") components for each supported network. "yalla" + Transport Layer") components for each supported network. "yalla" uses the Mellanox MXM transport. "ucx" uses the OpenUCX transport. - "ob1" supports a variety of networks that can be used in diff --git a/README.JAVA.txt b/README.JAVA.txt index ca0c70abf2..804003e57e 100644 --- a/README.JAVA.txt +++ b/README.JAVA.txt @@ -257,7 +257,7 @@ Specifying offsets in buffers In a C program, it is common to specify an offset in a array with "&array[i]" or "array+i", for instance to send data starting from -a given positon in the array. The equivalent form in the Java bindings +a given position in the array. The equivalent form in the Java bindings is to "slice()" the buffer to start at an offset. Making a "slice()" on a buffer is only necessary, when the offset is not zero. Slices work for both arrays and direct buffers. diff --git a/VERSION b/VERSION index 199ced4884..f92b41d35e 100644 --- a/VERSION +++ b/VERSION @@ -52,7 +52,7 @@ date="Unreleased developer copy" # The shared library version of each of Open MPI's public libraries. # These versions are maintained in accordance with the "Library # Interface Versions" chapter from the GNU Libtool documentation. The -# first Open MPI release to programatically specify these versions was +# first Open MPI release to programmatically specify these versions was # v1.3.4 (note that Libtool defaulted all prior releases to 0:0:0). # All changes in these version numbers are dictated by the Open MPI # release managers (not individual developers). Notes: diff --git a/autogen.pl b/autogen.pl index f64b59328e..924c4c6d68 100755 --- a/autogen.pl +++ b/autogen.pl @@ -915,7 +915,7 @@ sub patch_autotools_output { # Patch ltmain.sh error for PGI version numbers. Redirect stderr to # /dev/null because this patch is only necessary for some versions of # Libtool (e.g., 2.2.6b); it'll [rightfully] fail if you have a new - # enough Libtool that dosn't need this patch. But don't alarm the + # enough Libtool that doesn't need this patch. But don't alarm the # user and make them think that autogen failed if this patch fails -- # make the errors be silent. # Also patch ltmain.sh for NAG compiler @@ -935,7 +935,7 @@ sub patch_autotools_output { my @verbose_out; # Total ugh. We have to patch the configure script itself. See below - # for explainations why. + # for explanations why. open(IN, "configure") || my_die "Can't open configure"; my $c; $c .= $_ diff --git a/config/ompi_configure_options.m4 b/config/ompi_configure_options.m4 index c7290bf555..eea5f4cabb 100644 --- a/config/ompi_configure_options.m4 +++ b/config/ompi_configure_options.m4 @@ -75,7 +75,7 @@ else GROUP_SPARSE=0 fi AC_DEFINE_UNQUOTED([OMPI_GROUP_SPARSE],$GROUP_SPARSE, - [Wether we want sparse process groups]) + [Whether we want sparse process groups]) # diff --git a/config/ompi_cxx_have_exceptions.m4 b/config/ompi_cxx_have_exceptions.m4 index 2bd886e675..d102683a72 100644 --- a/config/ompi_cxx_have_exceptions.m4 +++ b/config/ompi_cxx_have_exceptions.m4 @@ -22,7 +22,7 @@ AC_DEFUN([OMPI_CXX_HAVE_EXCEPTIONS],[ # # Arguments: None # -# Depdencies: None +# Dependencies: None # # Check to see if the C++ compiler can handle exceptions # diff --git a/config/ompi_fortran_check_f08_assumed_rank.m4 b/config/ompi_fortran_check_f08_assumed_rank.m4 index 023569a22b..513bbdb243 100644 --- a/config/ompi_fortran_check_f08_assumed_rank.m4 +++ b/config/ompi_fortran_check_f08_assumed_rank.m4 @@ -54,7 +54,7 @@ AC_DEFUN([_OMPI_FORTRAN_CHECK_F08_ASSUMED_RANK], [ AS_VAR_SET(fortran_f08_assumed_rank, [$happy]); - # Now put the orignal CACHE_CHECK MSG_CHECKING back so that it can + # Now put the original CACHE_CHECK MSG_CHECKING back so that it can # output the MSG_RESULT. AC_MSG_CHECKING([Fortran compiler F08 assumed rank syntax]) OPAL_VAR_SCOPE_POP diff --git a/config/ompi_fortran_check_ignore_tkr.m4 b/config/ompi_fortran_check_ignore_tkr.m4 index ee69e49eb5..bb64eb5056 100644 --- a/config/ompi_fortran_check_ignore_tkr.m4 +++ b/config/ompi_fortran_check_ignore_tkr.m4 @@ -112,7 +112,7 @@ AC_DEFUN([_OMPI_FORTRAN_CHECK_IGNORE_TKR], [ AS_VAR_SET(fortran_ignore_tkr_data, [${happy}:${ompi_fortran_ignore_tkr_type}:${ompi_fortran_ignore_tkr_predecl}]) - # Now put the orignal CACHE_CHECK MSG_CHECKING back so that it can + # Now put the original CACHE_CHECK MSG_CHECKING back so that it can # output the MSG_RESULT. AC_MSG_CHECKING([Fortran compiler ignore TKR syntax]) OPAL_VAR_SCOPE_POP diff --git a/config/opal_check_cray_pmi.m4 b/config/opal_check_cray_pmi.m4 index 8e3dfee58f..8f210f5dbe 100644 --- a/config/opal_check_cray_pmi.m4 +++ b/config/opal_check_cray_pmi.m4 @@ -52,11 +52,11 @@ AC_DEFUN([OPAL_CHECK_CRAY_PMI_EXPLICIT],[ # AS_IF([test "$enable_static" = "yes"], [AS_IF([test -d /usr/lib/alps], - [AC_MSG_RESULT([Detected presense of /usr/lib/alps]) + [AC_MSG_RESULT([Detected presence of /usr/lib/alps]) CRAY_PMI_LDFLAGS="$CRAY_PMI_LDFLAGS -L/usr/lib/alps -lalpslli -lalpsutil" CRAY_PMI_LIBS="$CRAY_PMI_LIBS -L/usr/lib/alps -lalpslli -lalpsutil"], [AS_IF([test -d /opt/cray/xe-sysroot/default/usr/lib/alps], - [AC_MSG_RESULT([Detected presense of /opt/cray/xe-sysroot/default/usr/lib/alps]) + [AC_MSG_RESULT([Detected presence of /opt/cray/xe-sysroot/default/usr/lib/alps]) CRAY_PMI_LDFLAGS="$CRAY_PMI_LDFLAGS -L/opt/cray/xe-sysroot/default/usr/lib/alps -lalpslli -lalpsutil" CRAY_PMI_LIBS="$CRAY_PMI_LIBS -L/opt/cray/xe-sysroot/default/usr/lib/alps -lalpslli -lalpsutil"], [AC_MSG_ERROR([Requested enabling static linking but unable to local libalpslli and libalpsutil])]) diff --git a/config/opal_check_openfabrics.m4 b/config/opal_check_openfabrics.m4 index 3e773a7275..ef1e50bf74 100644 --- a/config/opal_check_openfabrics.m4 +++ b/config/opal_check_openfabrics.m4 @@ -57,7 +57,7 @@ AC_DEFUN([OPAL_CHECK_OPENFABRICS],[ # Enable padding for SPARC platforms by default because the # btl will segv otherwise. Keep padding disabled for other # platforms since there are some performance implications with - # padding on for those plaforms. + # padding on for those platforms. # case "${host}" in sparc*) diff --git a/config/opal_check_os_flavors.m4 b/config/opal_check_os_flavors.m4 index e8eaba112e..f055d949b0 100644 --- a/config/opal_check_os_flavors.m4 +++ b/config/opal_check_os_flavors.m4 @@ -22,7 +22,7 @@ AC_DEFUN([OPAL_CHECK_OS_FLAVOR_SPECIFIC], AC_MSG_CHECKING([$1]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [[#ifndef $1 - error: this isnt $1 + error: this is not $1 #endif ]])], [opal_found_$2=yes], diff --git a/config/opal_check_package.m4 b/config/opal_check_package.m4 index 18ba67a37e..197c8b7317 100644 --- a/config/opal_check_package.m4 +++ b/config/opal_check_package.m4 @@ -186,7 +186,7 @@ dnl * library_name / function_name: check for function function_name in dnl -llibrary_name. Specifically, for library_name, use the "foo" form, dnl as opposed to "libfoo". dnl * extra_libraries: if the library_name you are checking for requires -dnl additonal -l arguments to link successfully, list them here. +dnl additional -l arguments to link successfully, list them here. dnl * dir_prefix: if the header/library is located in a non-standard dnl location (e.g., /opt/foo as opposed to /usr), list it here dnl * libdir_prefix: if the library is not under $dir_prefix/lib or diff --git a/config/opal_check_pthread_pids.m4 b/config/opal_check_pthread_pids.m4 index cb3b20a85e..1cdf5b9c43 100644 --- a/config/opal_check_pthread_pids.m4 +++ b/config/opal_check_pthread_pids.m4 @@ -69,7 +69,7 @@ void *checkpid(void *arg) { [MSG=no OPAL_THREADS_HAVE_DIFFERENT_PIDS=0], [MSG=yes OPAL_THREADS_HAVE_DIFFERENT_PIDS=1], [ - # If we're cross compiling, we can't do another AC_* function here beause + # If we're cross compiling, we can't do another AC_* function here because # it we haven't displayed the result from the last one yet. So defer # another test until below. OPAL_THREADS_HAVE_DIFFERENT_PIDS= diff --git a/config/opal_config_asm.m4 b/config/opal_config_asm.m4 index eaff55bc8f..db120d409e 100644 --- a/config/opal_config_asm.m4 +++ b/config/opal_config_asm.m4 @@ -532,7 +532,7 @@ dnl OPAL_CHECK_ASM_TYPE dnl dnl Sets OPAL_ASM_TYPE to the prefix for the function type to dnl set a symbol's type as function (needed on ELF for shared -dnl libaries). If no .type directive is needed, sets OPAL_ASM_TYPE +dnl libraries). If no .type directive is needed, sets OPAL_ASM_TYPE dnl to an empty string dnl dnl We look for @ \# % @@ -831,7 +831,7 @@ dnl dnl Check if the compiler is capable of doing GCC-style inline dnl assembly. Some compilers emit a warning and ignore the inline dnl assembly (xlc on OS X) and compile without error. Therefore, -dnl the test attempts to run the emited code to check that the +dnl the test attempts to run the emitted code to check that the dnl assembly is actually run. To run this test, one argument to dnl the macro must be an assembly instruction in gcc format to move dnl the value 0 into the register containing the variable ret. diff --git a/config/opal_configure_options.m4 b/config/opal_configure_options.m4 index ba52c2eb30..43fcaf3469 100644 --- a/config/opal_configure_options.m4 +++ b/config/opal_configure_options.m4 @@ -402,7 +402,7 @@ AM_CONDITIONAL([OPAL_WANT_SCRIPT_WRAPPER_COMPILERS], [test "$enable_script_wrapp # AC_ARG_ENABLE([per-user-config-files], [AC_HELP_STRING([--enable-per-user-config-files], - [Disable per-user configuration files, to save disk accesses during job start-up. This is likely desirable for large jobs. Note that this can also be acheived by environment variables at run-time. (default: enabled)])]) + [Disable per-user configuration files, to save disk accesses during job start-up. This is likely desirable for large jobs. Note that this can also be achieved by environment variables at run-time. (default: enabled)])]) if test "$enable_per_user_config_files" = "no" ; then result=0 else diff --git a/config/opal_functions.m4 b/config/opal_functions.m4 index b1e4d4e140..34c965df31 100644 --- a/config/opal_functions.m4 +++ b/config/opal_functions.m4 @@ -42,7 +42,7 @@ dnl AC_DEFUN([OPAL_CONFIGURE_SETUP],[ # Some helper script functions. Unfortunately, we cannot use $1 kinds -# of arugments here because of the m4 substitution. So we have to set +# of arguments here because of the m4 substitution. So we have to set # special variable names before invoking the function. :-\ opal_show_title() { @@ -322,7 +322,7 @@ dnl ####################################################################### # OPAL_APPEND_UNIQ(variable, new_argument) # ---------------------------------------- # Append new_argument to variable if not already in variable. This assumes a -# space seperated list. +# space separated list. # # This could probably be made more efficient :(. AC_DEFUN([OPAL_APPEND_UNIQ], [ @@ -453,7 +453,7 @@ dnl ####################################################################### # - the argument does not begin with -I, -L, or -l, or # - the argument begins with -I, -L, or -l, and it's not already in variable # -# This macro assumes a space seperated list. +# This macro assumes a space separated list. AC_DEFUN([OPAL_FLAGS_APPEND_UNIQ], [ OPAL_VAR_SCOPE_PUSH([opal_tmp opal_append]) @@ -649,7 +649,7 @@ AC_DEFUN([OPAL_COMPUTE_MAX_VALUE], [ overflow=1 fi else - # stil negative. Time to give up. + # still negative. Time to give up. overflow=1 fi opal_num_bits=0 diff --git a/config/opal_mca.m4 b/config/opal_mca.m4 index 39917b1533..b363f73d9f 100644 --- a/config/opal_mca.m4 +++ b/config/opal_mca.m4 @@ -226,7 +226,7 @@ AC_DEFUN([OPAL_MCA],[ # of the hard stuff is in here MCA_PROJECT_SUBDIRS= m4_foreach(mca_project, [mca_project_list], - [# BWB: Until projects have seperate configure scripts + [# BWB: Until projects have separate configure scripts # and can skip running all of ORTE, just avoid recursing # into orte sub directory if orte disabled if (test "mca_project" = "ompi" && test "$enable_mpi" != "no") || test "mca_project" = "opal" || test "mca_project" = "orte" || test "mca_project" = "oshmem"; then diff --git a/config/opal_setup_wrappers.m4 b/config/opal_setup_wrappers.m4 index 6f0e2a2b38..4631077079 100644 --- a/config/opal_setup_wrappers.m4 +++ b/config/opal_setup_wrappers.m4 @@ -68,7 +68,7 @@ AC_DEFUN([OPAL_WRAPPER_FLAGS_ADD], [ # That is, a component may not influence CFLAGS, CXXFLAGS, or FCFLAGS. # # Notes: -# * Keep user flags seperate as 1) they should have no influence +# * Keep user flags separate as 1) they should have no influence # over build and 2) they don't go through the uniqification we do # with the other wrapper compiler options # * While the user (the person who runs configure) is allowed to set diff --git a/config/oshmem_configure_options.m4 b/config/oshmem_configure_options.m4 index 48ede73a54..fa38995245 100644 --- a/config/oshmem_configure_options.m4 +++ b/config/oshmem_configure_options.m4 @@ -153,7 +153,7 @@ fi # # We can't set am_conditional here since it's yet unknown if there is -# valid Fortran compiler avaliable +# valid Fortran compiler available # ]) dnl diff --git a/config/pkg.m4 b/config/pkg.m4 index b0bab42dfa..91582341c1 100644 --- a/config/pkg.m4 +++ b/config/pkg.m4 @@ -53,7 +53,7 @@ fi[]dnl # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -# only at the first occurence in configure.ac, so if the first place +# only at the first occurrence in configure.ac, so if the first place # it's called might be skipped (such as if it is within an "if", you # have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- diff --git a/test/carto/carto-file b/test/carto/carto-file index 3253b2590f..46e6c8ef32 100644 --- a/test/carto/carto-file +++ b/test/carto/carto-file @@ -20,7 +20,7 @@ NODE Ethernet eth1 # # -# Connection decleration From node To node:weight To node:weight ...... +# Connection declaration From node To node:weight To node:weight ...... # (Reserve word) (declered (declered (declered # above) above) above) #=============================================================================================== diff --git a/test/carto/carto_test.c b/test/carto/carto_test.c index 05be6f8f68..2ff81d6d86 100644 --- a/test/carto/carto_test.c +++ b/test/carto/carto_test.c @@ -56,13 +56,13 @@ main(int argc, char* argv[]) opal_graph_print(graph); slot0 = opal_carto_base_find_node(graph, "slot0"); if (NULL == slot0) { - opal_output(0,"couldnt find slot0 in the graph exiting\n"); + opal_output(0,"couldn't find slot0 in the graph exiting\n"); opal_carto_base_free_graph(graph); return -1; } end_node = opal_carto_base_find_node(graph, "slot3"); if (NULL == end_node) { - opal_output(0,"couldnt find mthca1 in the graph exiting\n"); + opal_output(0,"couldn't find mthca1 in the graph exiting\n"); opal_carto_base_free_graph(graph); return -1; } @@ -87,13 +87,13 @@ main(int argc, char* argv[]) opal_graph_print(graph); slot0 = opal_carto_base_find_node(graph, "slot0"); if (NULL == slot0) { - opal_output(0,"couldnt find slot0 in the graph exiting\n"); + opal_output(0,"couldn't find slot0 in the graph exiting\n"); opal_carto_base_free_graph(graph); return -1; } end_node = opal_carto_base_find_node(graph, "mthca1"); if (NULL == end_node) { - opal_output(0,"couldnt find mthca1 in the graph exiting\n"); + opal_output(0,"couldn't find mthca1 in the graph exiting\n"); opal_carto_base_free_graph(graph); return -1; } @@ -118,13 +118,13 @@ main(int argc, char* argv[]) opal_graph_print(graph); slot0 = opal_carto_base_find_node(graph, "slot0"); if (NULL == slot0) { - opal_output(0,"couldnt find slot0 in the graph exiting\n"); + opal_output(0,"couldn't find slot0 in the graph exiting\n"); opal_carto_base_free_graph(graph); return -1; } end_node = opal_carto_base_find_node(graph, "eth1"); if (NULL == end_node) { - opal_output(0,"couldnt find mthca1 in the graph exiting\n"); + opal_output(0,"couldn't find mthca1 in the graph exiting\n"); opal_carto_base_free_graph(graph); return -1; } @@ -149,13 +149,13 @@ main(int argc, char* argv[]) opal_graph_print(graph); slot0 = opal_carto_base_find_node(graph, "slot0"); if (NULL == slot0) { - opal_output(0,"couldnt find slot0 in the graph exiting\n"); + opal_output(0,"couldn't find slot0 in the graph exiting\n"); opal_carto_base_free_graph(graph); return -1; } end_node = opal_carto_base_find_node(graph, "mem3"); if (NULL == end_node) { - opal_output(0,"couldnt find mthca1 in the graph exiting\n"); + opal_output(0,"couldn't find mthca1 in the graph exiting\n"); opal_carto_base_free_graph(graph); return -1; } diff --git a/test/class/opal_pointer_array.c b/test/class/opal_pointer_array.c index f608678c00..5c7bec1860 100644 --- a/test/class/opal_pointer_array.c +++ b/test/class/opal_pointer_array.c @@ -71,7 +71,7 @@ static void test(bool thread_usage){ if( (array->size - array->number_free) == test_len_in_array) { test_success(); } else { - test_failure("check on number of elments in array"); + test_failure("check on number of elements in array"); } /* check order of data */ diff --git a/test/datatype/checksum.c b/test/datatype/checksum.c index 666f49869a..34d958ef74 100644 --- a/test/datatype/checksum.c +++ b/test/datatype/checksum.c @@ -115,7 +115,7 @@ int main( int argc, char* argv[] ) OBJ_RELEASE(convertor); /** - * The datatype is not usefull anymore + * The datatype is not useful anymore */ OBJ_RELEASE(sparse); diff --git a/test/datatype/ddt_lib.c b/test/datatype/ddt_lib.c index 9170da0914..49a5264034 100644 --- a/test/datatype/ddt_lib.c +++ b/test/datatype/ddt_lib.c @@ -418,7 +418,7 @@ ompi_datatype_t* test_contiguous( void ) { ompi_datatype_t *pdt, *pdt1, *pdt2; - printf( "test contiguous (alignement)\n" ); + printf( "test contiguous (alignment)\n" ); ompi_datatype_create_contiguous(0, &ompi_mpi_datatype_null.dt, &pdt1); ompi_datatype_add( pdt1, &ompi_mpi_double.dt, 1, 0, -1 ); if( outputFlags & DUMP_DATA_AFTER_COMMIT ) { diff --git a/test/datatype/opal_datatype_test.c b/test/datatype/opal_datatype_test.c index 0dcb508f0d..9c30a9e36f 100644 --- a/test/datatype/opal_datatype_test.c +++ b/test/datatype/opal_datatype_test.c @@ -187,7 +187,7 @@ static int local_copy_ddt_count( opal_datatype_t const * const pdt, int count ) } } if( 0 == errors ) { - printf("Validation check succesfully passed\n"); + printf("Validation check successfully passed\n"); } else { printf("Found %d errors. Giving up!\n", errors); exit(-1); @@ -473,7 +473,7 @@ static int local_copy_with_convertor( opal_datatype_t const * const pdt, int cou } } if( 0 == errors ) { - printf("Validation check succesfully passed\n"); + printf("Validation check successfully passed\n"); } else { printf("Found %d errors. Giving up!\n", errors); exit(-1); diff --git a/test/datatype/opal_ddt_lib.c b/test/datatype/opal_ddt_lib.c index f7368960d3..3fa5592bd5 100644 --- a/test/datatype/opal_ddt_lib.c +++ b/test/datatype/opal_ddt_lib.c @@ -611,7 +611,7 @@ opal_datatype_t* test_contiguous( void ) { opal_datatype_t *pdt, *pdt1, *pdt2; - printf( "test contiguous (alignement)\n" ); + printf( "test contiguous (alignment)\n" ); opal_datatype_create_contiguous(0, &opal_datatype_empty, &pdt1); opal_datatype_add( pdt1, &opal_datatype_float8, 1, 0, -1 ); if( outputFlags & DUMP_DATA_AFTER_COMMIT ) { diff --git a/test/event/event-test.c b/test/event/event-test.c index 1b90b0b973..244c929cc7 100644 --- a/test/event/event-test.c +++ b/test/event/event-test.c @@ -123,10 +123,10 @@ main (int argc, char **argv) fprintf(stderr, "Write data to %s\n", fifo); #endif - /* Initalize the event library */ + /* Initialize the event library */ opal_init(); - /* Initalize one event */ + /* Initialize one event */ #ifdef WIN32 opal_event.set(opal_event_base, &evfifo, (int)socket, OPAL_EV_READ, fifo_read, &evfifo); #else diff --git a/test/event/signal-test.c b/test/event/signal-test.c index 79c189a14c..261892b315 100644 --- a/test/event/signal-test.c +++ b/test/event/signal-test.c @@ -50,10 +50,10 @@ main (int argc, char **argv) { opal_event_t signal_int, signal_term; - /* Initalize the event library */ + /* Initialize the event library */ opal_init(); - /* Initalize one event */ + /* Initialize one event */ opal_event.set(opal_event_base, &signal_term, SIGUSR1, OPAL_EV_SIGNAL|OPAL_EV_PERSIST, signal_cb, &signal_term); opal_event.set(opal_event_base, &signal_int, SIGUSR2, OPAL_EV_SIGNAL|OPAL_EV_PERSIST, signal_cb, diff --git a/test/event/time-test.c b/test/event/time-test.c index e4e38c4668..cec0e04715 100644 --- a/test/event/time-test.c +++ b/test/event/time-test.c @@ -52,10 +52,10 @@ main (int argc, char **argv) opal_event_t timeout; struct timeval tv; - /* Initalize the event library */ + /* Initialize the event library */ opal_event_init(); - /* Initalize one event */ + /* Initialize one event */ opal_evtimer_set(&timeout, timeout_cb, &timeout); timerclear(&tv); diff --git a/test/monitoring/monitoring_test.c b/test/monitoring/monitoring_test.c index f3616ab790..ad1a00e425 100644 --- a/test/monitoring/monitoring_test.c +++ b/test/monitoring/monitoring_test.c @@ -302,7 +302,7 @@ int main(int argc, char* argv[]) if( rank%2 ) { MPI_Win_post(distant_group, 0, win); MPI_Win_wait(win); - /* Check recieved values */ + /* Check received values */ for( int v = 0; v < 10240; ++v ) if( from != win_buff[v] ) { printf("Error on checking exchanged values: win_buff[%d] == %d instead of %d\n", @@ -327,7 +327,7 @@ int main(int argc, char* argv[]) MPI_Barrier(MPI_COMM_WORLD); - /* Check recieved values */ + /* Check received values */ for( int v = 0; v < 10240; ++v ) if( from != win_buff[v] ) { printf("Error on checking exchanged values: win_buff[%d] == %d instead of %d\n", diff --git a/test/monitoring/test_overhead.sh b/test/monitoring/test_overhead.sh index d17f99ba09..96814ba0ba 100755 --- a/test/monitoring/test_overhead.sh +++ b/test/monitoring/test_overhead.sh @@ -24,7 +24,7 @@ # This file create as an output one heatmap per operation # tested. Currently, tested operations are : # - MPI_Send (software overhead) -# - MPI_Send (ping-pong, to measure theoverhead with the communciation time) +# - MPI_Send (ping-pong, to measure the overhead with the communication time) # - MPI_Bcast # - MPI_Alltoall # - MPI_Put diff --git a/test/mpi/environment/run_tests b/test/mpi/environment/run_tests index 8f6890a21e..25d8818ba7 100755 --- a/test/mpi/environment/run_tests +++ b/test/mpi/environment/run_tests @@ -3,7 +3,7 @@ # ==== # run script for mpi environment tests -# Arguements +# Arguments # ========== # # test_list = no args or all runs all tests diff --git a/test/mpi/run_tests b/test/mpi/run_tests index cfcd3d9f33..73b5c80516 100755 --- a/test/mpi/run_tests +++ b/test/mpi/run_tests @@ -3,7 +3,7 @@ # ==== # run script for mpi tests -# Arguements +# Arguments # ========== # # test_list = no args or all runs all tests