ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
28609d3ac2
openmpi/ompi/mca/coll/ml/coll_ml_module.c

3092 строки
114 KiB
C
Исходник Обычный вид История

coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/*
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
* Copyright (c) 2009-2013 Oak Ridge National Laboratory. All rights reserved.
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
* Copyright (c) 2009-2012 Mellanox Technologies. All rights reserved.
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
* Copyright (c) 2012-2014 Los Alamos National Security, LLC. All rights
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
* reserved.
Remove warnings identified by clang 3.4 * Remove unused static functions * Remove unused static variables cmr=v1.8:reviewer=hjelmn This commit was SVN r31023.
2014-03-12 17:17:54 +04:00
* Copyright (c) 2013-2014 Cisco Systems, Inc. All rights reserved.
coll/ml: fix leaks Thanks to ggouaillardet for finding and fixing these issues. Closes trac:4460 cmr=v1.8.1:reviewer=manjugv This commit was SVN r31264. The following Trac tickets were found above: Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
2014-03-28 03:25:31 +04:00
* Copyright (c) 2014 Research Organization for Information Science
* and Technology (RIST). All rights reserved.
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
/**
* @file
*
* Most of the description of the data layout is in the
* coll_ml_module.c file.
*/
#include "ompi_config.h"
#include <unistd.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <fcntl.h>
#include <errno.h>
#include "ompi/constants.h"
#include "ompi/communicator/communicator.h"
#include "ompi/mca/coll/coll.h"
#include "ompi/mca/coll/base/base.h"
#include "ompi/mca/sbgp/base/base.h"
#include "ompi/mca/bcol/base/base.h"
#include "ompi/mca/sbgp/sbgp.h"
Moving mca/common/netpatterns and commpaterns to ompi/patterns. This commit was SVN r28035.
2013-02-06 01:52:55 +04:00
#include "ompi/patterns/comm/coll_ops.h"
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
#include "ompi/mca/coll/ml/coll_ml.h"
#include "opal/util/argv.h"
#include "opal/datatype/opal_datatype.h"
#include "opal/util/output.h"
#include "opal/util/arch.h"
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
#include "opal/align.h"
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
#include "coll_ml.h"
Fixing ML COLL compilation issues on some SUN platforms. For more detail see following mail thread: http://www.open-mpi.org/community/lists/devel/2012/08/11448.php A lot of thanks to Paul Hargrove for the issue analysis and patch testing. Refs trac:3243 This commit was SVN r27178. The following Trac tickets were found above: Ticket 3243 --> https://svn.open-mpi.org/trac/ompi/ticket/3243
2012-08-29 18:10:42 +04:00
#include "coll_ml_inlines.h"
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
#include "coll_ml_select.h"
#include "coll_ml_custom_utils.h"
#include "coll_ml_allocation.h"
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
static int coll_ml_parse_topology (sub_group_params_t *sub_group_meta_data, size_t sub_group_count,
int *list_of_ranks_in_all_subgroups, int level_one_size);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* #define NEW_LEADER_SELECTION */
struct ranks_proxy_t {
/* number of subgroups for which the rank is a proxy */
int number_subgroups;
/* subgrou indecies */
int *subgroup_index;
};
typedef struct rank_proxy_t rank_proxy_t;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#define PROVIDE_SUFFICIENT_MEMORY(ptr, dummy_ptr, ptr_size, unit_type, in_use, \
n_to_add,n_to_grow) \
do { \
if ((in_use) + (n_to_add) > (ptr_size)) { \
(dummy_ptr) = (unit_type *) \
realloc(ptr, sizeof(unit_type) * ((ptr_size) + (n_to_grow))); \
if (NULL != (dummy_ptr)) { \
(ptr) = (dummy_ptr); \
(ptr_size) += (n_to_grow); \
} \
} \
} while (0)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/*
* Local functions
*/
static int ml_module_enable(mca_coll_base_module_t *module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
struct ompi_communicator_t *comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
static int mca_coll_ml_fill_in_route_tab(mca_coll_ml_topology_t *topo,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ompi_communicator_t *comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
static void
mca_coll_ml_module_construct(mca_coll_ml_module_t *module)
{
int index_topo, coll_i, st_i;
mca_coll_ml_topology_t *topo;
coll/ml: more fixes There were a couple of issues with the memory leak fixes and several more verbose issues. This fixes those issues. cmr=v1.8.1:ticket=trac:4473 This commit was SVN r31273. The following Trac tickets were found above: Ticket 4473 --> https://svn.open-mpi.org/trac/ompi/ticket/4473
2014-03-28 22:31:28 +04:00
memset ((char *) module + sizeof (module->super), 0, sizeof (*module) - sizeof (module->super));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* It's critical to reset data_offset to zero */
module->data_offset = -1;
/* If the topology support zero level and no fragmentation was requested */
for (index_topo = 0; index_topo < COLL_ML_TOPO_MAX; index_topo++) {
topo = &module->topo_list[index_topo];
topo->global_lowest_hier_group_index = -1;
topo->global_highest_hier_group_index = -1;
topo->number_of_all_subgroups = -1;
topo->n_levels = -1;
topo->all_bcols_mode = ~(0); /* set to all bits */
topo->status = COLL_ML_TOPO_DISABLED; /* all topologies are not used by default */
}
for (coll_i = 0; coll_i < ML_NUM_OF_FUNCTIONS; coll_i++) {
for (st_i = 0; st_i < MCA_COLL_MAX_NUM_SUBTYPES; st_i++) {
module->collectives_topology_map[coll_i][st_i] = ML_UNDEFINED;
}
}
for (coll_i = 0; coll_i < BCOL_NUM_OF_FUNCTIONS; ++coll_i) {
module->small_message_thresholds[coll_i] = BCOL_THRESHOLD_UNLIMITED;
}
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
OBJ_CONSTRUCT(&module->active_bcols_list, opal_list_t);
OBJ_CONSTRUCT(&module->waiting_for_memory_list, opal_list_t);
OBJ_CONSTRUCT(&module->fragment_descriptors, ompi_free_list_t);
OBJ_CONSTRUCT(&module->message_descriptors, ompi_free_list_t);
OBJ_CONSTRUCT(&module->coll_ml_collective_descriptors, ompi_free_list_t);
memset (&module->fallback, 0, sizeof (module->fallback));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#define ML_RELEASE_FALLBACK(_coll_ml, _coll) \
do { \
if (_coll_ml->fallback.coll_ ## _coll ## _module) { \
OBJ_RELEASE(_coll_ml->fallback.coll_ ## _coll ## _module); \
_coll_ml->fallback.coll_ ## _coll ## _module = NULL; \
} \
} while (0);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
static void
mca_coll_ml_module_destruct(mca_coll_ml_module_t *module)
{
coll/ml: more fixes There were a couple of issues with the memory leak fixes and several more verbose issues. This fixes those issues. cmr=v1.8.1:ticket=trac:4473 This commit was SVN r31273. The following Trac tickets were found above: Ticket 4473 --> https://svn.open-mpi.org/trac/ompi/ticket/4473
2014-03-28 22:31:28 +04:00
int i, j, k,fnc, index_topo;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
mca_coll_ml_topology_t *topo;
ML_VERBOSE(4, ("ML module destruct"));
coll/ml: fix leaks Thanks to ggouaillardet for finding and fixing these issues. Closes trac:4460 cmr=v1.8.1:reviewer=manjugv This commit was SVN r31264. The following Trac tickets were found above: Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
2014-03-28 03:25:31 +04:00
ml_coll_hier_reduce_cleanup(module);
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
for (index_topo = 0; index_topo < COLL_ML_TOPO_MAX; index_topo++) {
topo = &module->topo_list[index_topo];
if (COLL_ML_TOPO_DISABLED == topo->status) {
/* skip the topology */
continue;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
if (NULL != topo->component_pairs) {
for(i = 0; i < topo->n_levels; ++i) {
for(j = 0; j < topo->component_pairs[i].num_bcol_modules; ++j) {
OBJ_RELEASE(topo->component_pairs[i].bcol_modules[j]);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
/* free the array of bcol module */
free(topo->component_pairs[i].bcol_modules);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
OBJ_RELEASE(topo->component_pairs[i].subgroup_module);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
free(topo->component_pairs);
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
/* gvm Leak FIX Free collective algorithms structure */
for (fnc = 0; fnc < BCOL_NUM_OF_FUNCTIONS; fnc++) {
if (NULL != topo->hierarchical_algorithms[fnc]){
free(topo->hierarchical_algorithms[fnc]);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
}
/* free up the route vector memory */
if (NULL != topo->route_vector) {
free(topo->route_vector);
}
/* free resrouce description */
if(NULL != topo->array_of_all_subgroups) {
for( k=0 ; k < topo->number_of_all_subgroups ; k++ ) {
if(0 < topo->array_of_all_subgroups[k].n_ranks) {
free(topo->array_of_all_subgroups[k].rank_data);
topo->array_of_all_subgroups[k].rank_data = NULL;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
free(topo->array_of_all_subgroups);
topo->array_of_all_subgroups = NULL;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: fix leaks Thanks to ggouaillardet for finding and fixing these issues. Closes trac:4460 cmr=v1.8.1:reviewer=manjugv This commit was SVN r31264. The following Trac tickets were found above: Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
2014-03-28 03:25:31 +04:00
if (NULL != topo->hier_layout_info) {
free(topo->hier_layout_info);
topo->hier_layout_info = NULL;
}
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: fix leaks Thanks to ggouaillardet for finding and fixing these issues. Closes trac:4460 cmr=v1.8.1:reviewer=manjugv This commit was SVN r31264. The following Trac tickets were found above: Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
2014-03-28 03:25:31 +04:00
OPAL_LIST_DESTRUCT(&(module->active_bcols_list));
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
OBJ_DESTRUCT(&(module->waiting_for_memory_list));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
/* gvm Leak FIX Remove fragment free list */
OBJ_DESTRUCT(&(module->fragment_descriptors));
OBJ_DESTRUCT(&(module->message_descriptors));
/* push mca_bcol_base_memory_block_desc_t back on list manager */
mca_coll_ml_free_block(module->payload_block);
/* release the cinvertor if it was allocated */
if (NULL != module->reference_convertor) {
OBJ_RELEASE(module->reference_convertor);
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
OBJ_DESTRUCT(&(module->coll_ml_collective_descriptors));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
if (NULL != module->coll_ml_barrier_function) {
coll/ml: fix leaks Thanks to ggouaillardet for finding and fixing these issues. Closes trac:4460 cmr=v1.8.1:reviewer=manjugv This commit was SVN r31264. The following Trac tickets were found above: Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
2014-03-28 03:25:31 +04:00
if (NULL != module->coll_ml_barrier_function->component_functions) {
free(module->coll_ml_barrier_function->component_functions);
module->coll_ml_barrier_function->component_functions = NULL;
}
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
free(module->coll_ml_barrier_function);
coll/ml: fix leaks Thanks to ggouaillardet for finding and fixing these issues. Closes trac:4460 cmr=v1.8.1:reviewer=manjugv This commit was SVN r31264. The following Trac tickets were found above: Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
2014-03-28 03:25:31 +04:00
module->coll_ml_barrier_function = NULL;
}
if (module->coll_ml_memsync_function) {
if (module->coll_ml_memsync_function->component_functions) {
free(module->coll_ml_memsync_function->component_functions);
module->coll_ml_memsync_function->component_functions = NULL;
}
free(module->coll_ml_memsync_function);
module->coll_ml_memsync_function = NULL;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
coll/ml: fix leaks Thanks to ggouaillardet for finding and fixing these issues. Closes trac:4460 cmr=v1.8.1:reviewer=manjugv This commit was SVN r31264. The following Trac tickets were found above: Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
2014-03-28 03:25:31 +04:00
ml_coll_hier_allreduce_cleanup_new(module);
ml_coll_hier_allgather_cleanup(module);
ml_coll_hier_bcast_cleanup(module);
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
/* release saved collectives */
ML_RELEASE_FALLBACK(module, allreduce);
ML_RELEASE_FALLBACK(module, allgather);
ML_RELEASE_FALLBACK(module, reduce);
ML_RELEASE_FALLBACK(module, bcast);
ML_RELEASE_FALLBACK(module, iallreduce);
ML_RELEASE_FALLBACK(module, iallgather);
ML_RELEASE_FALLBACK(module, ireduce);
ML_RELEASE_FALLBACK(module, ibcast);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
static int mca_coll_ml_request_free(ompi_request_t** request)
{
/* local variables */
mca_coll_ml_collective_operation_progress_t *ml_request=
(mca_coll_ml_collective_operation_progress_t *)(*request);
mca_coll_ml_module_t *ml_module = OP_ML_MODULE(ml_request);
/* The ML memory bank recycling check done, no we may
* return request and signal completion */
/* this fragement does not hold the message data, so ok to return */
assert(0 == ml_request->pending);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
//assert(0 == ml_request->fragment_data.offset_into_user_buffer);
assert(&ml_request->full_message == ml_request->fragment_data.message_descriptor);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
assert(ml_request->dag_description.status_array[0].item.opal_list_item_refcount == 0);
ML_VERBOSE(10, ("Releasing Master %p", ml_request));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* Mark the request as invalid */
OMPI_REQUEST_FINI(&ml_request->full_message.super);
rename ompi_free_list operations to _mt, as per discussions at last face to face meeting This commit was SVN r28734.
2013-07-09 02:07:52 +04:00
OMPI_FREE_LIST_RETURN_MT(&(ml_module->coll_ml_collective_descriptors),
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(ompi_free_list_item_t *)ml_request);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* MPI needs to return with the request object set to MPI_REQUEST_NULL
*/
*request = MPI_REQUEST_NULL;
return OMPI_SUCCESS;
}
/* constructor for collective managment descriptor */
static void mca_coll_ml_collective_operation_progress_construct
(mca_coll_ml_collective_operation_progress_t *desc) {
/* initialize pointer */
desc->dag_description.status_array = NULL;
OBJ_CONSTRUCT(&desc->full_message.send_convertor, opal_convertor_t);
OBJ_CONSTRUCT(&desc->full_message.recv_convertor, opal_convertor_t);
OBJ_CONSTRUCT(&desc->full_message.dummy_convertor, opal_convertor_t);
/* intialize request free pointer */
desc->full_message.super.req_free = mca_coll_ml_request_free;
/* no cancel function */
desc->full_message.super.req_cancel = NULL;
/* Collective request type */
desc->full_message.super.req_type = OMPI_REQUEST_COLL;
/* RLG: Do we need to set req_mpi_object ? */
/* If not null , we have to release next fragment */
desc->next_to_process_frag = NULL;
/* pointer to previous fragment */
desc->prev_frag = NULL;
/* Pasha: moreinit */
desc->pending = 0;
}
/* destructor for collective managment descriptor */
static void mca_coll_ml_collective_operation_progress_destruct
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(mca_coll_ml_collective_operation_progress_t *desc) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
mca_coll_ml_module_t *ml_module =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(mca_coll_ml_module_t *) desc->coll_module;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
int i, max_dag_size = ml_module->max_dag_size;
if (NULL != desc->dag_description.status_array) {
for (i = 0; i < max_dag_size; ++i) {
OBJ_DESTRUCT(&desc->dag_description.status_array[i].item);
}
free(desc->dag_description.status_array);
desc->dag_description.status_array = NULL;
}
OBJ_DESTRUCT(&desc->full_message.send_convertor);
OBJ_DESTRUCT(&desc->full_message.recv_convertor);
OBJ_DESTRUCT(&desc->full_message.dummy_convertor);
}
/* initialize the full message descriptor - can pass in module specific
* initialization data
*/
static void init_ml_fragment_desc(ompi_free_list_item_t *desc , void* ctx);
static void init_ml_message_desc(ompi_free_list_item_t *desc , void* ctx)
{
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
mca_coll_ml_module_t *module= (mca_coll_ml_module_t *) ctx;
mca_coll_ml_descriptor_t *msg_desc = (mca_coll_ml_descriptor_t *) desc;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* finish setting up the fragment descriptor */
init_ml_fragment_desc((ompi_free_list_item_t*)&(msg_desc->fragment),module);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* initialize the fragment descriptor - can pass in module specific
* initialization data
*/
static void init_ml_fragment_desc(ompi_free_list_item_t *desc , void* ctx)
{
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
mca_coll_ml_module_t *module= (mca_coll_ml_module_t *) ctx;
mca_coll_ml_fragment_t *frag_desc = (mca_coll_ml_fragment_t *) desc;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* allocated array of function arguments */
/* RLG - we have a problem if we don't get the memory */
/* malloc-debug does not like zero allocations */
if (module->max_fn_calls > 0) {
frag_desc->fn_args = (bcol_function_args_t *)
malloc(sizeof(bcol_function_args_t) * module->max_fn_calls);
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
static void mca_coll_ml_bcol_list_item_construct(mca_coll_ml_bcol_list_item_t *item)
{
item->bcol_module = NULL;
}
OBJ_CLASS_INSTANCE(mca_coll_ml_bcol_list_item_t,
opal_list_item_t,
mca_coll_ml_bcol_list_item_construct,
NULL);
static void generate_active_bcols_list(mca_coll_ml_module_t *ml_module)
{
int i, j, index_topo;
mca_coll_ml_topology_t *topo;
bool bcol_was_found;
mca_coll_ml_bcol_list_item_t *bcol_item = NULL;
mca_bcol_base_module_t *bcol_module = NULL;
ML_VERBOSE(10, ("Generating active bcol list "));
for (index_topo = 0; index_topo < COLL_ML_TOPO_MAX; index_topo++) {
topo = &ml_module->topo_list[index_topo];
if (COLL_ML_TOPO_DISABLED == topo->status) {
/* skip the topology */
continue;
}
for( i = 0; i < topo->n_levels; i++) {
for( j = 0; j < topo->component_pairs[i].num_bcol_modules; j++) {
bcol_module = topo->component_pairs[i].bcol_modules[j];
/* Check if the bcol provides synchronization function, if the
* function is not provided we skip this bcol, since it isn't used
* for memory synchronization (for instance - ptpcoll )*/
if (NULL == GET_BCOL_SYNC_FN(bcol_module)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10,(" No sync function was provided by bcol %s",
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
bcol_module->bcol_component->bcol_version.mca_component_name));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
continue;
}
bcol_was_found = false;
for(bcol_item = (mca_coll_ml_bcol_list_item_t *)opal_list_get_first(&ml_module->active_bcols_list);
!bcol_was_found &&
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
bcol_item != (mca_coll_ml_bcol_list_item_t *)opal_list_get_end(&ml_module->active_bcols_list);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
bcol_item = (mca_coll_ml_bcol_list_item_t *)opal_list_get_next((opal_list_item_t *)bcol_item)) {
if (bcol_module == bcol_item->bcol_module) {
bcol_was_found = true;
}
}
/* append the item to the list if it was not found */
if (!bcol_was_found) {
bcol_item = OBJ_NEW(mca_coll_ml_bcol_list_item_t);
bcol_item->bcol_module = bcol_module;
opal_list_append(&ml_module->active_bcols_list, (opal_list_item_t *)bcol_item);
}
}
}
}
}
static int calculate_buffer_header_size(mca_coll_ml_module_t *ml_module)
{
mca_coll_ml_topology_t *topo;
mca_bcol_base_module_t *bcol_module;
uint32_t offset = 0;
int i, j, *ranks_in_comm, kount = 0,
rc, data_offset = 0, index_topo,
comm_size = ompi_comm_size(ml_module->comm);
ML_VERBOSE(10, ("Calculating offset for the ML"));
/* probably a stupid thing to do, but we have to loop over twice */
for (index_topo = 0; index_topo < COLL_ML_TOPO_MAX; index_topo++) {
topo = &ml_module->topo_list[index_topo];
if (COLL_ML_TOPO_DISABLED == topo->status) {
/* skip the topology */
continue;
}
for (i = 0; i < topo->n_levels; i++) {
for (j = 0; j < topo->component_pairs[i].num_bcol_modules; j++) {
bcol_module = topo->component_pairs[i].bcol_modules[j];
if (0 < bcol_module->header_size) {
/* bump the kounter */
kount++;
/* find the largest header request */
if (offset < bcol_module->header_size) {
offset = bcol_module->header_size;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* Set bcol mode bits */
topo->all_bcols_mode &= bcol_module->supported_mode;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
offset = OPAL_ALIGN(offset, BCOL_HEAD_ALIGN, uint32_t);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* select largest offset between multiple topologies */
if (data_offset < (int) offset) {
data_offset = (int) offset;
}
}
ranks_in_comm = (int *) malloc(comm_size * sizeof(int));
if (OPAL_UNLIKELY(NULL == ranks_in_comm)) {
ML_ERROR(("Memory allocation failed."));
return OMPI_ERROR;
}
for (i = 0; i < comm_size; ++i) {
ranks_in_comm[i] = i;
}
rc = comm_allreduce_pml(&data_offset, &data_offset, 1,
MPI_INT, ompi_comm_rank(ml_module->comm),
MPI_MAX, comm_size,
ranks_in_comm, ml_module->comm);
if (OPAL_UNLIKELY(OMPI_SUCCESS != rc)) {
ML_ERROR(("comm_allreduce_pml failed."));
return OMPI_ERROR;
}
ml_module->data_offset = (uint32_t) data_offset;
free(ranks_in_comm);
ML_VERBOSE(10, ("The offset is %d", ml_module->data_offset));
return OMPI_SUCCESS;
}
static int mca_coll_ml_register_bcols(mca_coll_ml_module_t *ml_module)
{
/* local variables */
int i, j, index_topo;
int ret = OMPI_SUCCESS;
mca_bcol_base_module_t *bcol_module;
mca_coll_ml_topology_t *topo;
/* loop over all bcols and register the ml memory block which each */
for (index_topo = 0; index_topo < COLL_ML_TOPO_MAX; index_topo++) {
topo = &ml_module->topo_list[index_topo];
if (COLL_ML_TOPO_DISABLED == topo->status) {
/* skip the topology */
continue;
}
for (i = 0; i < topo->n_levels; i++) {
for (j = 0; j < topo->component_pairs[i].num_bcol_modules; j++) {
bcol_module = topo->component_pairs[i].bcol_modules[j];
if (NULL != bcol_module->bcol_memory_init) {
Fixing broken dependency between ML/BCOLS This is hot-fix patch for the issue reported by Ralph. In future we plan to restructure ml data structure layout. Tested by Nathan. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30619. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-02-07 23:15:45 +04:00
ret = bcol_module->bcol_memory_init(ml_module->payload_block,
ml_module->data_offset,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
bcol_module,
(NULL != bcol_module->network_context) ?
bcol_module->network_context->context_data: NULL);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OMPI_SUCCESS != ret) {
ML_ERROR(("Bcol registration failed on ml level!!"));
return ret;
}
}
}
}
}
return OMPI_SUCCESS;
}
static int ml_module_memory_initialization(mca_coll_ml_module_t *ml_module)
{
int ret;
int nbanks, nbuffers, buf_size;
mca_coll_ml_component_t *cs = &mca_coll_ml_component;
ml_module->payload_block = mca_coll_ml_allocate_block(cs,ml_module->payload_block);
if (NULL == ml_module->payload_block) {
coll/ml: more fixes There were a couple of issues with the memory leak fixes and several more verbose issues. This fixes those issues. cmr=v1.8.1:ticket=trac:4473 This commit was SVN r31273. The following Trac tickets were found above: Ticket 4473 --> https://svn.open-mpi.org/trac/ompi/ticket/4473
2014-03-28 22:31:28 +04:00
ML_VERBOSE(1, ("mca_coll_ml_allocate_block exited with error."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return OMPI_ERROR;
}
/* get memory block parameters */
nbanks = cs->n_payload_mem_banks;
nbuffers = cs->n_payload_buffs_per_bank;
buf_size = cs->payload_buffer_size;
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Call for initialize block."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = mca_coll_ml_initialize_block(ml_module->payload_block,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
nbuffers, nbanks, buf_size, ml_module->data_offset,
NULL);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OMPI_SUCCESS != ret) {
return ret;
}
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Call for register bcols."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* inititialize the memory with all of the bcols:
loop through the bcol modules and invoke the memory init */
ret = mca_coll_ml_register_bcols(ml_module);
if (OMPI_SUCCESS != ret) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_ERROR(("mca_coll_ml_register_bcols returned an error."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* goto CLEANUP; */
return ret;
}
return OMPI_SUCCESS;
}
/* do some sanity checks */
static int check_global_view_of_subgroups( int n_procs_selected,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int n_procs_in, int ll_p1, int* all_selected,
mca_sbgp_base_module_t *module )
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
/* local variables */
int ret=OMPI_SUCCESS;
int i, sum;
bool local_leader_found=false;
/* is there a single local-leader */
for (i = 0; i < n_procs_selected; i++) {
if( ll_p1 == -all_selected[module->group_list[i]]) {
/* found the local leader */
if( local_leader_found ) {
/* more than one local leader - don't know how to
* handle this, so bail
*/
coll/ml: move error messages to verbose output There are situations where coll/ml does not initialize properly. These will eventually need to be fixed but in the meantime it is better to not always print an error message because the collective framework can still fall back on another collective module. This commit reduces the verbose output. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31129.
2014-03-19 01:26:10 +04:00
ML_VERBOSE(1, ("More than a single leader for a group."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret=OMPI_ERROR;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
} else {
local_leader_found=true;
}
}
}
/* check to make sure that all agree on the same size of
* the group
*/
sum=0;
for (i = 0; i < n_procs_in; i++) {
if(ll_p1==all_selected[i]) {
sum++;
} else if( ll_p1 == -all_selected[i]) {
sum++;
}
}
if( sum != n_procs_selected ) {
coll/ml: move error messages to verbose output There are situations where coll/ml does not initialize properly. These will eventually need to be fixed but in the meantime it is better to not always print an error message because the collective framework can still fall back on another collective module. This commit reduces the verbose output. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31129.
2014-03-19 01:26:10 +04:00
ML_VERBOSE(1, ("number of procs in the group unexpected. Expected %d Got %d",n_procs_selected,sum));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret=OMPI_ERROR;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* check to make sure that all have the same list of ranks.
*/
for (i = 0; i < n_procs_selected; i++) {
if(ll_p1!=all_selected[module->group_list[i]] &&
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ll_p1!=-all_selected[module->group_list[i]] ) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret=OMPI_ERROR;
coll/ml: move error messages to verbose output There are situations where coll/ml does not initialize properly. These will eventually need to be fixed but in the meantime it is better to not always print an error message because the collective framework can still fall back on another collective module. This commit reduces the verbose output. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31129.
2014-03-19 01:26:10 +04:00
ML_VERBOSE(1, ("Mismatch in rank list - element #%d - %d ",i,all_selected[module->group_list[i]]));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
/* return */
return ret;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
exit_ERROR:
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* return */
return ret;
}
static void ml_init_k_nomial_trees(mca_coll_ml_topology_t *topo, int *list_of_ranks_in_all_subgroups, int my_rank_in_list)
{
int *list_n_connected;
Cleaning warning in collectives code This commit was SVN r27331.
2012-09-12 23:47:23 +04:00
int group_size, rank, i, j, knt, offset, k, my_sbgp = 0;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int my_root, level_one_knt;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
sub_group_params_t *array_of_all_subgroup_ranks = topo->
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
array_of_all_subgroups;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
int num_total_subgroups = topo->number_of_all_subgroups;
int n_hier = topo->n_levels;
hierarchy_pairs *pair = NULL;
mca_coll_ml_leader_offset_info_t *loc_leader = (mca_coll_ml_leader_offset_info_t *)
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
malloc(sizeof(mca_coll_ml_leader_offset_info_t)*(n_hier+1));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* first thing I want to know is where does the first level end */
level_one_knt = 0;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll/ml: fix valgrind warning about reading uninitialed value This isn't causing any errors that I know about but it does fix an annoying valgrind warning. Simple fix, no review required. cmr=v1.7.5:reviewer=ompi-rm1.7 This commit was SVN r31130.
2014-03-19 01:26:17 +04:00
while (level_one_knt < num_total_subgroups && 0 == array_of_all_subgroup_ranks[level_one_knt].level_in_hierarchy) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
level_one_knt++;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
/* fprintf(stderr,"PPP %d %d %d ", level_one_knt, array_of_all_subgroup_ranks[0].level_in_hierarchy, num_total_subgroups); */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* I want to cache this number for unpack*/
array_of_all_subgroup_ranks->level_one_index = level_one_knt;
/* determine whether or not ranks are contiguous */
topo->ranks_contiguous = true;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (i = 0, knt = 0 ; i < level_one_knt && topo->ranks_contiguous ; ++i) {
for (j = 0 ; j < array_of_all_subgroup_ranks[i].n_ranks ; ++j, ++knt) {
if (knt != list_of_ranks_in_all_subgroups[knt]) {
topo->ranks_contiguous = false;
break;
}
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
loc_leader[0].offset = 0;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* now find my first level offset, and my index in level one */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (i = 0, loc_leader[0].level_one_index = -1 ; i < level_one_knt ; ++i) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
offset = array_of_all_subgroup_ranks[i].index_of_first_element;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (k = 0 ; k < array_of_all_subgroup_ranks[i].n_ranks ; ++k) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rank = list_of_ranks_in_all_subgroups[k + offset];
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (rank == my_rank_in_list) {
loc_leader[0].offset = offset;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
loc_leader[0].level_one_index = k;
i = level_one_knt;
break;
}
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* every rank MUST appear at level 0 */
assert (loc_leader[0].level_one_index > -1);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (i = 0 ; i < n_hier ; ++i) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
pair = &topo->component_pairs[i];
/* find the size of the group */
group_size = pair->subgroup_module->group_size;
/* malloc some memory for the new list to cache
on the bcol module
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
*/
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
list_n_connected = (int *) malloc(sizeof(int)*group_size);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* next thing to do is to find out which subgroup I'm in
* at this particular level
*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (j = 0, knt = 0, my_sbgp = -1 ; j < num_total_subgroups && 0 > my_sbgp ; ++j) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
offset = array_of_all_subgroup_ranks[j].index_of_first_element;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* in the 1-level case just skip any group of size 1 and move on
* to the real group. */
if (1 == n_hier && 1 == array_of_all_subgroup_ranks[j].n_ranks) {
continue;
}
for (k = 0; k < array_of_all_subgroup_ranks[j].n_ranks; k++) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rank = list_of_ranks_in_all_subgroups[k+offset];
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* we can not use the level_in_topology flag to determine the
* level since not all levels may be represented so keep a count
* of the number of times this ranks shows up. when it has been
* seen the correct number of times we are done. */
if (rank == my_rank_in_list && ++knt == (i+1)){
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
my_sbgp = j;
/* tag whether I am a local leader or not at this level */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
loc_leader[i].leader = (my_rank_in_list == array_of_all_subgroup_ranks[j].root_rank_in_comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
break;
}
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* should have found a subgroup */
assert (my_sbgp > -1);
for (j = 0 ; j < group_size ; ++j) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
list_n_connected[j] = array_of_all_subgroup_ranks[my_sbgp].
rank_data[j].num_of_ranks_represented;
}
/* now find all sbgps that the root of this sbgp belongs to
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
* previous to this "my_sbgp" */
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
my_root = array_of_all_subgroup_ranks[my_sbgp].root_rank_in_comm;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (j = 0, knt = 0 ; j < my_sbgp ; ++j) {
if (array_of_all_subgroup_ranks[j].root_rank_in_comm == my_root) {
for (k = 1; k < array_of_all_subgroup_ranks[j].n_ranks; ++k) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
knt += array_of_all_subgroup_ranks[j].rank_data[k].
num_of_ranks_represented;
}
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* and then I add one for the root itself */
list_n_connected[0] = knt + 1;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* now cache this on the bcol module */
pair->bcol_modules[0]->list_n_connected = list_n_connected;
/* I should do one more round here and figure out my offset at this level
* the calculation is simple: Am I a local leader in this level? If so, then I keep the offset
* from the previous level. Else, I find out how "far away" the local leader is from me and set
* this as the new offset.
*/
/* do this after first level */
if (i > 0) {
/* if I'm not the local leader */
if( !loc_leader[i].leader) {
/* then I am not a local leader at this level */
offset = array_of_all_subgroup_ranks[my_sbgp].index_of_first_element;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (k = 0, knt = 0 ; k < array_of_all_subgroup_ranks[my_sbgp].n_ranks ; ++k) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rank = list_of_ranks_in_all_subgroups[k+offset];
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (rank == my_rank_in_list) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
break;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
knt += list_n_connected[k];
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
loc_leader[i].offset = loc_leader[i-1].offset - knt;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
} else {
/* if I am the local leader, then keep the same offset */
loc_leader[i].offset = loc_leader[i-1].offset;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
pair->bcol_modules[0]->hier_scather_offset = loc_leader[i].offset;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/*setup the tree */
pair->bcol_modules[0]->k_nomial_tree(pair->bcol_modules[0]);
}
/* see if I am in the last subgroup, if I am,
* then I am a root for the bcast operation
*/
offset = array_of_all_subgroup_ranks[n_hier - 1].index_of_first_element;
for( i = 0; i < array_of_all_subgroup_ranks[n_hier - 1].n_ranks; i++){
rank = list_of_ranks_in_all_subgroups[i + offset];
if( rank == my_rank_in_list ){
loc_leader[n_hier - 1].offset = 0;
loc_leader[n_hier - 1].leader = true;
}
}
/* set the last offset to 0 and set the leader according to your top level position */
loc_leader[n_hier].offset = 0;
if(loc_leader[n_hier - 1].leader){
loc_leader[n_hier].leader = true;
} else {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
loc_leader[n_hier].leader = false;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* what other goodies do I want to cache on the ml-module? */
topo->hier_layout_info = loc_leader;
}
static int ml_setup_full_tree_data(mca_coll_ml_topology_t *topo,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ompi_communicator_t *comm,
int my_highest_group_index, int *map_to_comm_ranks,
int *num_total_subgroups, sub_group_params_t **array_of_all_subgroup_ranks,
int **list_of_ranks_in_all_subgroups)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
int ret = OMPI_SUCCESS;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int i, in_buf, root, my_rank,sum;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
int in_num_total_subgroups = *num_total_subgroups;
Cleaning warning in collectives code This commit was SVN r27331.
2012-09-12 23:47:23 +04:00
int *scratch_space = NULL;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* figure out who holds all the sub-group information - only those
* ranks in the top level know this data at this point */
my_rank = ompi_comm_rank(comm);
if( (my_highest_group_index == topo->global_highest_hier_group_index )
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
&&
( my_rank ==
topo->component_pairs[topo->n_levels-1].subgroup_module->group_list[0])
) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
in_buf=my_rank;
} else {
/* since this will be a sum allreduce - contributing 0 will not
* change the value */
in_buf=0;
}
ret = comm_allreduce_pml(&in_buf, &root, 1, MPI_INT,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
my_rank, MPI_SUM,
ompi_comm_size(comm), map_to_comm_ranks,
comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("comm_allreduce_pml failed. root reduction"));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* broadcast the number of groups */
ret=comm_bcast_pml(num_total_subgroups, root, 1,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
MPI_INT, my_rank, ompi_comm_size(comm),
map_to_comm_ranks,comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("comm_bcast_pml failed. num_total_subgroups bcast"));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
scratch_space=(int *)malloc(4*sizeof(int)*(*num_total_subgroups));
if (OPAL_UNLIKELY(NULL == scratch_space)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory scratch_space."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if( my_rank == root ) {
sum=0;
for(i=0 ; i < (*num_total_subgroups) ; i++ ) {
scratch_space[4*i]=(*array_of_all_subgroup_ranks)[i].root_rank_in_comm;
scratch_space[4*i+1]=(*array_of_all_subgroup_ranks)[i].n_ranks;
scratch_space[4*i+2]=(*array_of_all_subgroup_ranks)[i].index_of_first_element;
scratch_space[4*i+3]=(*array_of_all_subgroup_ranks)[i].level_in_hierarchy;
}
}
ret=comm_bcast_pml(scratch_space, root, 4*(*num_total_subgroups),
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
MPI_INT, my_rank, ompi_comm_size(comm),
map_to_comm_ranks, comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("comm_allreduce_pml failed. scratch_space bcast"));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
if( my_rank != root ) {
if( in_num_total_subgroups != (*num_total_subgroups) ) {
/* free old array_of_all_subgroup_ranks array - need to fill it
* with the global data - assume that if the array size is the
* same, all data is correct, and in the same order */
free((*array_of_all_subgroup_ranks));
(*array_of_all_subgroup_ranks)=(sub_group_params_t *)
malloc(sizeof(sub_group_params_t)*(*num_total_subgroups));
if (OPAL_UNLIKELY(NULL == (*array_of_all_subgroup_ranks))) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory array_of_all_subgroup_ranks."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
for(i=0 ; i < (*num_total_subgroups) ; i++ ) {
(*array_of_all_subgroup_ranks)[i].root_rank_in_comm=scratch_space[4*i];
(*array_of_all_subgroup_ranks)[i].n_ranks=scratch_space[4*i+1];
(*array_of_all_subgroup_ranks)[i].index_of_first_element=scratch_space[4*i+2];
(*array_of_all_subgroup_ranks)[i].level_in_hierarchy=scratch_space[4*i+3];
}
}
}
/* figure out how many entries in all the subgroups - ranks that apear
* in k subgroups appear k times in the list */
sum=0;
for(i=0 ; i < (*num_total_subgroups) ; i++ ) {
sum+=(*array_of_all_subgroup_ranks)[i].n_ranks;
}
if( in_num_total_subgroups != (*num_total_subgroups) ) {
(*list_of_ranks_in_all_subgroups)=(int *)
realloc((*list_of_ranks_in_all_subgroups),sizeof(int)*sum);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (OPAL_UNLIKELY(NULL == (*list_of_ranks_in_all_subgroups))) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory *list_of_ranks_in_all_subgroups."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ret = comm_bcast_pml(*list_of_ranks_in_all_subgroups, root, sum,
MPI_INT, my_rank, ompi_comm_size(comm),
map_to_comm_ranks, comm);
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Bcast failed for list_of_ranks_in_all_subgroups "));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/*
* The data that is needed for a given rooted operation is:
* - subgroup,rank information for the source of the data.
* That is, which rank in the subgroup will recieve the
* data and distribute to the rest of the ranks.
* - the ranks that this data will be sent to. This is
* described by the ranks in the current subgroups, and
* the subroups for which each rank is a proxy for,
* recursively in the communication tree.
*
* The assumption is that data will be delived to each subgroup
* in an order, that is, all the data destined to subgroup rank 0
* will appear 1st, then that for rank 1, etc. This implies that
* the data destined to rank 0, for example, will include the
* data for rank 0, as well as all the ranks that appear following
* it in the tree - in order.
*
* Proxies: A rank may be a proxy for more than a single subgroup.
* When a rank is proxy for more than a single subgroup, we
* maintain a fixed order of subgroups for which this is a
* proxy, with an assumption that the data for the first subgroup
* appears first in the list, then that for the second, etc.
* Since the data for the proxy (which is a member of this subgroup)
* appears only once in the data list, the assumption is that the
* proxy will be the root for this operation, and it is the first
* set of data in the data list. This means, that the data offset
* for the second ranks in each subgroup will include all the data
* for the previous subgroups, recursively. This lets us maintain
* the simple addressing scheme of contigous data per rank in
* the subcommunicator.
*
* The information needed for each rank in the subgroup are the
coll/ml: fix some warnings and the spelling of indices This commit fixes one warning that should have caused coll/ml to segfault on reduce. The fix should be correct but we will continue to investigate. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30477. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-01-29 22:44:21 +04:00
* group indices for which it is a proxy.
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
*/
/*
* fill in the vertecies in the hierarchichal communications graph
*/
/* figure out how detailed connection information, so that we can
* can figure out how the data needs to be ordered for sending it
* though the tree in various collective algorithms that have per-rank
* data associated with them.
*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* this function does a depth first traversal of the tree data and
* builds rank data and ensures that hierarchy level 0 is in the
* correct order for collective algorithms with per-rank data.
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll_ml_parse_topology (*array_of_all_subgroup_ranks, *num_total_subgroups,
*list_of_ranks_in_all_subgroups, ompi_comm_size (comm));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* The list of ranks in all subgroups is the same as the old sort list. This is the same
* order needed for both scatter and gather. */
topo->sort_list = (*list_of_ranks_in_all_subgroups);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* return */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
exit_ERROR:
if (scratch_space) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
free(scratch_space);
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return ret;
}
static int get_new_subgroup_data (int32_t *all_selected, int size_of_all_selected,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sub_group_params_t **sub_group_meta_data,
int *size_of_sub_group_meta_data,
int **list_of_ranks_in_all_subgroups,
int *size_of_list_of_ranks_in_all_subgroups,
int *num_ranks_in_list_of_ranks_in_all_subgroups,
int *num_total_subgroups,
int *map_to_comm_ranks, int level_in_hierarchy
) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* local data */
int rc=OMPI_SUCCESS;
int rank_in_list,old_sg_size=(*num_total_subgroups);
int sg_index, array_id, offset, sg_id;
sub_group_params_t *dummy1 = NULL;
int32_t **dummy2 = NULL;
int32_t *dummy3 = NULL;
int32_t **temp = NULL;
int knt1 = 0,
knt2 = 0,
knt3 = 0;
/* loop over all elements in the array of ranks selected, looking for
* newly selected ranks - these form the new subgroups */
for(rank_in_list = 0 ; rank_in_list < size_of_all_selected ; rank_in_list++ ) {
int sg_root, current_rank_in_comm;
/* get root's rank in the communicator */
sg_root=all_selected[rank_in_list];
if( 0 == sg_root ) {
/* this rank not selected - go to the next rank */
continue;
}
if( sg_root < 0 ) {
sg_root=-sg_root-1;
} else {
sg_root-=1;
}
current_rank_in_comm=map_to_comm_ranks[rank_in_list];
/* loop over existing groups, and see if this is a member of a new group
* or if this group has already been found.
*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (sg_index = old_sg_size, sg_id = -1 ; sg_index < (*num_total_subgroups) ; sg_index++) {
if ((*sub_group_meta_data)[sg_index].root_rank_in_comm == sg_root) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* add rank to the list */
(*sub_group_meta_data)[sg_index].n_ranks++;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sg_id = sg_index;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
break;
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (-1 == sg_id) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* did not find existing sub-group, create new one */
/* intialize new subgroup */
PROVIDE_SUFFICIENT_MEMORY((*sub_group_meta_data), dummy1,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(*size_of_sub_group_meta_data),
sub_group_params_t, (*num_total_subgroups), 1, 5);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* do this for the temporary memory slots */
PROVIDE_SUFFICIENT_MEMORY(temp, dummy2,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
knt1, int32_t *, knt2, 1, 5);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(NULL == (*sub_group_meta_data))) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory for sub_group_meta_data."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rc = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(*sub_group_meta_data)[(*num_total_subgroups)].root_rank_in_comm = sg_root;
(*sub_group_meta_data)[(*num_total_subgroups)].n_ranks = 1;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* no need for this here - use a temporary ptr */
temp[knt2]=
(int *)malloc(sizeof(int)*size_of_all_selected);
if (OPAL_UNLIKELY(NULL == temp[knt2] ) ){
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory for sub_group_meta_data."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rc = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sg_id = (*num_total_subgroups)++;
knt3 = ++knt2;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
} else {
knt3 = sg_id - old_sg_size + 1;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
array_id = (*sub_group_meta_data)[sg_id].n_ranks-1;
temp[knt3-1][array_id] = current_rank_in_comm;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* linearize the data - one rank will ship this to all the other
* ranks the communicator
*/
/* make sure there is enough memory to hold the list */
PROVIDE_SUFFICIENT_MEMORY((*list_of_ranks_in_all_subgroups),dummy3,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(*size_of_list_of_ranks_in_all_subgroups),
int, (*num_ranks_in_list_of_ranks_in_all_subgroups),
size_of_all_selected,size_of_all_selected);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(NULL == (*list_of_ranks_in_all_subgroups))) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory for list_of_ranks_in_all_subgroups."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rc = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* loop over new subgroups */
for( sg_id=old_sg_size ; sg_id < (*num_total_subgroups) ; sg_id++ ) {
offset=(*num_ranks_in_list_of_ranks_in_all_subgroups);
(*sub_group_meta_data)[sg_id].index_of_first_element=offset;
for( array_id=0 ; array_id < (*sub_group_meta_data)[sg_id].n_ranks ;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
array_id++ ) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
(*list_of_ranks_in_all_subgroups)[offset+array_id]=
temp[sg_id-old_sg_size][array_id];
}
(*num_ranks_in_list_of_ranks_in_all_subgroups)+=
(*sub_group_meta_data)[sg_id].n_ranks;
(*sub_group_meta_data)[sg_id].level_in_hierarchy=level_in_hierarchy;
/* this causes problems on XT5 starting at 6144 cores */
free(temp[sg_id-old_sg_size]);
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* clean up temporary storage */
if(NULL != temp) {
free(temp);
}
/* return */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
exit_ERROR:
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return rc;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
static int topo_parse (sub_group_params_t *sub_group_meta_data, int index, int *dst, int *src, int *dst_offset)
{
int src_offset = sub_group_meta_data[index].index_of_first_element;
int total_ranks_represented = 0, ranks_represented;
if (0 == sub_group_meta_data[index].level_in_hierarchy) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Copying data for index %d to %d. Ranks at this level: %d", index, *dst_offset,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sub_group_meta_data[index].n_ranks));
/* move level one subgroup data */
memmove (dst + *dst_offset, src + src_offset, sizeof (int) * sub_group_meta_data[index].n_ranks);
/* update the offset of this subgroup since it may have been moved */
sub_group_meta_data[index].index_of_first_element = *dst_offset;
*dst_offset += sub_group_meta_data[index].n_ranks;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Subgroup %d has %d ranks. level = %d", index, sub_group_meta_data[index].n_ranks,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sub_group_meta_data[index].level_in_hierarchy));
/* fill in subgroup ranks */
sub_group_meta_data[index].rank_data=(rank_properties_t *)
malloc(sizeof(rank_properties_t) * sub_group_meta_data[index].n_ranks);
if (OPAL_UNLIKELY(NULL == sub_group_meta_data[index].rank_data)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory for rank_data "));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return OMPI_ERR_OUT_OF_RESOURCE;
}
/* recurse on all subgroups */
for (int j = 0 ; j < sub_group_meta_data[index].n_ranks ; ++j) {
int rank = src[j + src_offset];
int next_level;
/* determine if this rank is the root of the subgroup */
if (rank == sub_group_meta_data[index].root_rank_in_comm) {
sub_group_meta_data[index].root_index = j;
}
sub_group_meta_data[index].rank_data[j].leaf = true;
sub_group_meta_data[index].rank_data[j].rank = rank;
if (sub_group_meta_data[index].level_in_hierarchy) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Looking for subgroup containing %d as root", rank));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
for (next_level = index - 1 ; next_level >= 0 ; --next_level) {
if (rank == sub_group_meta_data[next_level].root_rank_in_comm) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Subgroup %d has root %d", next_level, rank));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
break;
}
}
/* all ranks are represented in the lowest level. this subgroup is not at the lowest level
* so it must be a root at a lower level */
assert (next_level >= 0);
/* not a leaf node */
sub_group_meta_data[index].rank_data[j].leaf = false;
ranks_represented = topo_parse (sub_group_meta_data, next_level, dst, src, dst_offset);
if (0 > ranks_represented) {
return ranks_represented;
}
sub_group_meta_data[index].rank_data[j].num_of_ranks_represented = ranks_represented;
total_ranks_represented += ranks_represented;
} else {
/* leaf node */
sub_group_meta_data[index].rank_data[j].leaf = true;
sub_group_meta_data[index].rank_data[j].num_of_ranks_represented = 1;
total_ranks_represented++;
}
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Group %d, level %d, index %d, rank %d represents %d ranks", index,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sub_group_meta_data[index].level_in_hierarchy, j, rank,
sub_group_meta_data[index].rank_data[j].num_of_ranks_represented));
}
return total_ranks_represented;
}
/* put level one in leaf order */
static int coll_ml_parse_topology (sub_group_params_t *sub_group_meta_data, size_t sub_group_count,
int *list_of_ranks_in_all_subgroups, int level_one_size)
{
int *tmp_data;
int offset, rc;
tmp_data = calloc (level_one_size, sizeof (int));
if (NULL == tmp_data) {
return OMPI_ERR_OUT_OF_RESOURCE;
}
/* do a DFS parse of the topology and ensure that level 1 is in the correct scatter/gather order */
offset = 0;
rc = topo_parse (sub_group_meta_data, sub_group_count - 1, tmp_data, list_of_ranks_in_all_subgroups, &offset);
if (0 > rc) {
free (tmp_data);
return rc;
}
/* all ranks in level one should be represented in the re-order buffer */
assert (offset == level_one_size);
/* copy re-ordered level 1 (0) */
if (0 != offset) {
/* copy new level one data back into the list of all subgroups */
memmove (list_of_ranks_in_all_subgroups, tmp_data, sizeof (int) * offset);
}
free (tmp_data);
return OMPI_SUCCESS;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
static int append_new_network_context(hierarchy_pairs *pair)
{
int i;
int rc;
mca_coll_ml_lmngr_t *memory_manager = &mca_coll_ml_component.memory_manager;
bcol_base_network_context_t *nc = NULL;
for (i = 0; i < pair->num_bcol_modules; i++) {
nc = pair->bcol_modules[i]->network_context;
if (NULL != nc) {
rc = mca_coll_ml_lmngr_append_nc(memory_manager, nc);
if (OMPI_SUCCESS != rc) {
return OMPI_ERROR;
}
/* caching the network context id on bcol */
pair->bcol_modules[i]->context_index = nc->context_id;
}
}
return OMPI_SUCCESS;
}
static int ml_module_set_small_msg_thresholds(mca_coll_ml_module_t *ml_module)
{
const mca_coll_ml_topology_t *topo_info;
mca_bcol_base_module_t *bcol_module;
hierarchy_pairs *pair;
int i, j, rc, hier, *ranks_in_comm, n_hier, tp,
comm_size = ompi_comm_size(ml_module->comm);
for (tp = 0; tp < COLL_ML_TOPO_MAX; ++tp) {
topo_info = &ml_module->topo_list[tp];
if (COLL_ML_TOPO_DISABLED == topo_info->status) {
/* Skip the topology */
continue;
}
n_hier = topo_info->n_levels;
for (hier = 0; hier < n_hier; ++hier) {
pair = &topo_info->component_pairs[hier];
for (i = 0; i < pair->num_bcol_modules; ++i) {
bcol_module = pair->bcol_modules[i];
if (NULL != bcol_module->set_small_msg_thresholds) {
bcol_module->set_small_msg_thresholds(bcol_module);
}
for (j = 0; j < BCOL_NUM_OF_FUNCTIONS; ++j) {
if (ml_module->small_message_thresholds[j] >
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
bcol_module->small_message_thresholds[j]) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ml_module->small_message_thresholds[j] =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
bcol_module->small_message_thresholds[j];
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
}
}
}
ranks_in_comm = (int *) malloc(comm_size * sizeof(int));
if (OPAL_UNLIKELY(NULL == ranks_in_comm)) {
ML_ERROR(("Memory allocation failed."));
return OMPI_ERROR;
}
for (i = 0; i < comm_size; ++i) {
ranks_in_comm[i] = i;
}
rc = comm_allreduce_pml(ml_module->small_message_thresholds,
ml_module->small_message_thresholds,
BCOL_NUM_OF_FUNCTIONS, MPI_INT,
ompi_comm_rank(ml_module->comm), MPI_MIN,
comm_size, ranks_in_comm, ml_module->comm);
if (OPAL_UNLIKELY(OMPI_SUCCESS != rc)) {
ML_ERROR(("comm_allreduce_pml failed."));
return OMPI_ERROR;
}
free(ranks_in_comm);
return OMPI_SUCCESS;
}
static int mca_coll_ml_read_allbcols_settings(mca_coll_ml_module_t *ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int n_hierarchies)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
int i, j,
ret = OMPI_SUCCESS;
int *ranks_map = NULL,
*bcols_in_use = NULL,
*bcols_in_use_all_ranks = NULL;
bool use_user_bufs, limit_size_user_bufs;
ssize_t length_ml_payload;
int64_t frag_size;
const mca_bcol_base_component_2_0_0_t *bcol_component = NULL;
mca_base_component_list_item_t *bcol_cli = NULL;
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
int bcol_index;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* If this assert fails, it means that you changed initialization
* order and the date offset , that is critical for this section of code,
* have not been initilized.
* DO NOT REMOVE THIS ASSERT !!!
*/
assert(ml_module->data_offset >= 0);
/* need to figure out which bcol's are participating
* in the hierarchy across the communicator, so that we can set
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
* appropriate segmentation parameters.
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
*/
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
bcols_in_use = (int *) calloc(2 * n_hierarchies, sizeof(int));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(NULL == bcols_in_use)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory for bcols_in_use."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* setup pointers to arrays that will hold bcol parameters. Since
* given bols are not instantiated in all processes, need to get this
* information from those ranks that have instantiated these
* parameters
*/
bcols_in_use_all_ranks = bcols_in_use+n_hierarchies;
/* get list of bcols that I am using */
for (j = 0; j < COLL_ML_TOPO_MAX; j++) {
mca_coll_ml_topology_t *topo_info = &ml_module->topo_list[j];
if (COLL_ML_TOPO_DISABLED == topo_info->status) {
/* skip the topology */
continue;
}
for(i = 0; i < topo_info->n_levels; i++ ) {
int ind;
ind = topo_info->component_pairs[i].bcol_index;
bcols_in_use[ind] = 1;
}
}
/* set one to one mapping */
ranks_map = (int *) malloc(sizeof(int) * ompi_comm_size(ml_module->comm));
if (NULL == ranks_map) {
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
for (i = 0; i < ompi_comm_size(ml_module->comm); i++) {
ranks_map[i] = i;
}
/* reduce over all the ranks to figure out which bcols are
* participating at this level
*/
ret = comm_allreduce_pml(bcols_in_use, bcols_in_use_all_ranks,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
n_hierarchies, MPI_INT, ompi_comm_rank(ml_module->comm),
MPI_MAX, ompi_comm_size(ml_module->comm),
ranks_map, ml_module->comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("comm_allreduce_pml failed. bcols_in_use reduction"));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/*
* figure out fragmenation parameters
*/
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
/* size of ml buffer */
length_ml_payload = mca_coll_ml_component.payload_buffer_size - ml_module->data_offset;
/* figure out if data will be segmented for pipelining -
* for non-contigous data will just use a fragment the size
* of the ml payload buffer */
/* check to see if any bcols impose a limit */
limit_size_user_bufs = false;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
use_user_bufs = true;
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
frag_size = length_ml_payload;
bcol_index = 0;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
OPAL_LIST_FOREACH(bcol_cli, &mca_bcol_base_components_in_use, mca_base_component_list_item_t) {
/* check to see if this bcol is being used */
coll/ml: addendum to r31189. increment the bcol_index cmr=v1.8:ticket=trac:4436 This commit was SVN r31193. The following SVN revision numbers were found above: r31189 --> open-mpi/ompi@c7d830f4b9ba7dd22cf92f6fa0f4d2d823621916 The following Trac tickets were found above: Ticket 4436 --> https://svn.open-mpi.org/trac/ompi/ticket/4436
2014-03-22 02:03:56 +04:00
if (!bcols_in_use_all_ranks[bcol_index++]) {
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
/* not in use */
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
continue;
}
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
bcol_component = (mca_bcol_base_component_2_0_0_t *) bcol_cli->cli_component;
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* check to see if user buffers can be used */
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
if (!bcol_component->can_use_user_buffers) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* need to use library buffers, so all will do this */
use_user_bufs = false;
}
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
/* figure out fragement size */
if (bcol_component->max_frag_size != FRAG_SIZE_NO_LIMIT ){
/* user buffers need to be limited in size */
limit_size_user_bufs = true;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
if (0 == frag_size) {
/* nothing set yet */
frag_size = bcol_component->max_frag_size;
} else if (frag_size < bcol_component->max_frag_size) {
/* stricter constraint on fragment size */
frag_size = bcol_component->max_frag_size;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
if (!use_user_bufs || limit_size_user_bufs) {
/* we need to limit the user buffer size or use library buffers */
ml_module->fragment_size = frag_size;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
} else {
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
/* entire message may be processed in single chunk */
ml_module->fragment_size = FRAG_SIZE_NO_LIMIT;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
/* for non-contigous data - just use the ML buffers */
ml_module->ml_fragment_size = length_ml_payload;
/* set whether we can use user buffers */
ml_module->use_user_buffers = use_user_bufs;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ML_VERBOSE(10, ("Seting payload size to %d %d [%d %d]",
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ml_module->ml_fragment_size, length_ml_payload,
mca_coll_ml_component.payload_buffer_size,
ml_module->data_offset));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
exit_ERROR:
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (NULL != ranks_map) {
free(ranks_map);
}
if (NULL != bcols_in_use) {
free(bcols_in_use);
}
return ret;
}
static int ml_discover_hierarchy(mca_coll_ml_module_t *ml_module)
{
ompi_proc_t *my_proc = NULL;
int n_hierarchies = 0,
i = 0, ret = OMPI_SUCCESS;
int size_bcol_list, size_sbgp_list;
size_bcol_list = opal_list_get_size(&mca_bcol_base_components_in_use);
size_sbgp_list = opal_list_get_size(&mca_sbgp_base_components_in_use);
if ((size_bcol_list != size_sbgp_list) || size_sbgp_list < 1 || size_bcol_list < 1) {
ML_ERROR(("Error: (size of mca_bcol_base_components_in_use = %d)"
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
" != (size of mca_sbgp_base_components_in_use = %d) or zero.",
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
size_bcol_list, size_sbgp_list));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return OMPI_ERROR;
}
n_hierarchies = size_sbgp_list;
my_proc = ompi_proc_local();
/* create the converter, for current implementation we
support homogenius comunicators only */
ml_module->reference_convertor =
opal_convertor_create(my_proc->proc_arch, 0);
if (OPAL_UNLIKELY(NULL == ml_module->reference_convertor)) {
return OMPI_ERROR;
}
/* Do loop over all supported hiearchies.
To Do. We would like to have mca parameter that will allow control list
of topolgies that user would like use. Right now we will run
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
*/
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
for (i = 0; i < COLL_ML_TOPO_MAX; i++) {
if (COLL_ML_TOPO_ENABLED == ml_module->topo_list[i].status) {
ret = mca_coll_ml_component.topo_discovery_fn[i](ml_module, n_hierarchies);
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
return ret;
}
}
}
/* Local query for bcol header size */
ret = calculate_buffer_header_size(ml_module);
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
return ret;
}
/* Get BCOL tuning, like support for zero copy, fragment size, and etc.
* This query involves global synchronization over all processes */
ret = mca_coll_ml_read_allbcols_settings(ml_module, n_hierarchies);
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
return ret;
}
/* Here is the safe point to call ml_module_memory_initialization , please
be very careful,if you decide to move this arround.*/
ret = ml_module_memory_initialization(ml_module);
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
/* make sure to release just allocated memory */
mca_coll_ml_free_block(ml_module->payload_block);
return ret;
}
ret = ml_module_set_small_msg_thresholds(ml_module);
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
/* make sure to release just allocated memory */
mca_coll_ml_free_block(ml_module->payload_block);
return ret;
}
{
/* Syncronization barrier to make sure that all sides finsihed
* to register the memory */
int ret, i;
int *comm_ranks = NULL;
comm_ranks = (int *)calloc(ompi_comm_size(ml_module->comm), sizeof(int));
if (OPAL_UNLIKELY(NULL == comm_ranks)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return OMPI_ERR_OUT_OF_RESOURCE;
}
for (i = 0; i < ompi_comm_size(ml_module->comm); i++) {
comm_ranks[i] = i;
}
ret = comm_allreduce_pml(&ret, &i,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
1, MPI_INT, ompi_comm_rank(ml_module->comm),
MPI_MIN, ompi_comm_size(ml_module->comm), comm_ranks,
ml_module->comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: fix leaks Thanks to ggouaillardet for finding and fixing these issues. Closes trac:4460 cmr=v1.8.1:reviewer=manjugv This commit was SVN r31264. The following Trac tickets were found above: Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
2014-03-28 03:25:31 +04:00
free(comm_ranks);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OMPI_SUCCESS != ret) {
ML_ERROR(("comm_allreduce - failed to collect max_comm data"));
return ret;
}
/* Barrier done */
}
return ret;
}
static int mca_coll_ml_tree_hierarchy_discovery(mca_coll_ml_module_t *ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
mca_coll_ml_topology_t *topo, int n_hierarchies,
const char *exclude_sbgp_name, const char *include_sbgp_name)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
/* local variables */
char *ptr_output = NULL;
sbgp_base_component_keyval_t *sbgp_cli = NULL;
mca_base_component_list_item_t *bcol_cli = NULL;
hierarchy_pairs *pair = NULL;
mca_sbgp_base_module_t *module = NULL;
coll/ml: do not access group proc pointers directly. use ompi_comm_peer_lookup instead. Resolves an issue seen with --enable-sparse-groups. cmr=v1.7.5:reviewer=manjugv This commit was SVN r30945.
2014-03-06 02:57:21 +04:00
ompi_proc_t **copy_procs = NULL,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
*my_proc = NULL;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
const mca_sbgp_base_component_2_0_0_t *sbgp_component = NULL;
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
int i_hier = 0, n_hier = 0, ll_p1, bcol_index = 0,
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
n_procs_in = 0, group_index = 0, n_remain = 0,
i, j, ret = OMPI_SUCCESS, my_rank_in_list = 0,
n_procs_selected = 0, original_group_size = 0, i_am_done = 0,
basesmuma: clean up code Several changes are contained in this commit: - Clean up tabs and trailing whitespaces - Use consistent indentation in changed files - Remove unused code. None of the removed code will ever have been used in a trunk build. - Clean up the smcm code quite a bit - Do not fflush stderr and use opal_output instead of fprintf. These changes have been tested on Cray XE-6 and PSM systems. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30533. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-02-03 21:01:46 +04:00
local_leader, my_rank_in_subgroup, my_rank_in_remaining_list = 0,
my_rank_in_comm;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
int32_t my_lowest_group_index = -1, my_highest_group_index = -1;
int *map_to_comm_ranks = NULL, *bcols_in_use = NULL;
int32_t *all_selected = NULL,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
*index_proc_selected = NULL;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
short all_reduce_buffer2_in[2];
short all_reduce_buffer2_out[2];
sub_group_params_t *array_of_all_subgroup_ranks=NULL;
/* this pointer should probably be an int32_t and not an int type */
int32_t *list_of_ranks_in_all_subgroups=NULL;
coll/ml: further improve the hierarchy discovery to handle the case where a sbgp module fails to group any processes on any nodes. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31131.
2014-03-19 01:26:24 +04:00
int num_ranks_in_all_subgroups=0,num_total_subgroups=0;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
int size_of_array_of_all_subgroup_ranks=0;
int size_of_list_of_ranks_in_all_subgroups=0;
int32_t in_allgather_value;
if (NULL != exclude_sbgp_name && NULL != include_sbgp_name) {
ret = OMPI_ERROR;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
ML_VERBOSE(10,("include %s exclude %s size %d", include_sbgp_name, exclude_sbgp_name, n_hierarchies));
/* allocates scratch space */
all_selected = (int32_t *) calloc(ompi_comm_size(ml_module->comm), sizeof(int32_t));
if (OPAL_UNLIKELY(NULL == all_selected)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
map_to_comm_ranks = (int *) calloc(ompi_comm_size(ml_module->comm), sizeof(int));
if (OPAL_UNLIKELY(NULL == map_to_comm_ranks)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/*
** obtain list of procs
*/
/* create private copy for manipulation */
copy_procs = (ompi_proc_t **) calloc(ompi_comm_size(ml_module->comm),
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sizeof(ompi_proc_t *));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(NULL == copy_procs)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
for (i = 0; i < ompi_comm_size(ml_module->comm); i++) {
coll/ml: do not access group proc pointers directly. use ompi_comm_peer_lookup instead. Resolves an issue seen with --enable-sparse-groups. cmr=v1.7.5:reviewer=manjugv This commit was SVN r30945.
2014-03-06 02:57:21 +04:00
copy_procs[i] = ompi_comm_peer_lookup (ml_module->comm, i);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
map_to_comm_ranks[i] = i;
}
basesmuma: clean up code Several changes are contained in this commit: - Clean up tabs and trailing whitespaces - Use consistent indentation in changed files - Remove unused code. None of the removed code will ever have been used in a trunk build. - Clean up the smcm code quite a bit - Do not fflush stderr and use opal_output instead of fprintf. These changes have been tested on Cray XE-6 and PSM systems. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30533. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-02-03 21:01:46 +04:00
my_rank_in_comm = ompi_comm_rank (ml_module->comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
n_procs_in = ompi_comm_size(ml_module->comm);
original_group_size = n_procs_in;
/* setup information for all-reduce over out of band */
index_proc_selected = (int32_t *) malloc(sizeof(int32_t) * n_procs_in);
if (OPAL_UNLIKELY(NULL == index_proc_selected)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* get my proc pointer - used to identify myself in the list */
my_proc = ompi_proc_local();
my_rank_in_list = ompi_comm_rank(ml_module->comm);
topo->component_pairs = (hierarchy_pairs *) calloc(n_hierarchies, sizeof(hierarchy_pairs));
if (OPAL_UNLIKELY(NULL == topo->component_pairs)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
n_hier = 0;
/*
* Algorithm for subgrouping:
* 1) Start with all the ranks in the communicator
* 2) iterate over all (exclusive) hierarchy selection rules
* A) Apply subgrouping function to the remaining set of ranks
* - After the call to subgrouping subgroup_module->group_list
* has the index of ranks selected, from the list or ranks
* passed in.
* - map_to_comm_ranks maintains the mapping of the remaining
* ranks, to their rank in the communicator
* B) Each rank initializes a scratch array the size of the
* remaining ranks to 0, and then fills in the entry that
* corresponds to itself only with the value -/+R. If the
* rank is the local leader for the subgroup, the value of -R
* is entered, other wise R is entered. R is the root of the
* selected subgroup plus 1, so that for rank 0, +R has a
* different value than -R.
* C) The vector is then reduced, with the results going to all
* ranks, over the list of remaining ranks. As a result,
* the ranks of a given subgroup will show up with the value R,
* for all but the local-leader, which will have the value of -R.
* This is also used for error checking.
* D) subgroup_module->group_list is changed to contain the ranks
* of each member of the group within the communicator.
* E) Local rank with the group is determined.
* F) the list or remaining ranks is compacted, removing all selected
* ranks that are not the local-leader of the group.
* map_to_comm_ranks is also compacted.
* 3) This is terminated once all ranks are selected.
*/
/* loop over hierarchies */
sbgp_cli = (sbgp_base_component_keyval_t *) opal_list_get_first(&mca_sbgp_base_components_in_use);
bcol_cli = (mca_base_component_list_item_t *) opal_list_get_first(&mca_bcol_base_components_in_use);
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Loop over hierarchies."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
i_hier = 0;
while ((opal_list_item_t *) sbgp_cli != opal_list_get_end(&mca_sbgp_base_components_in_use)){
coll/ml: further improve the hierarchy discovery to handle the case where a sbgp module fails to group any processes on any nodes. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31131.
2014-03-19 01:26:24 +04:00
/* number of processes selected with this sbgp on all ranks */
int global_n_procs_selected;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/*
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
** obtain the list of ranks in the current level
*/
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
sbgp_component = (mca_sbgp_base_component_2_0_0_t *) sbgp_cli->component.cli_component;
/* Skip excluded levels */
if (NULL != exclude_sbgp_name) {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ML_VERBOSE(10,("EXCLUDE compare %s to %s", include_sbgp_name,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sbgp_component->sbgp_version.mca_component_name));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if(0 == strcmp(exclude_sbgp_name,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sbgp_component->sbgp_version.mca_component_name)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* take the next element */
sbgp_cli = (sbgp_base_component_keyval_t *) opal_list_get_next((opal_list_item_t *) sbgp_cli);
bcol_cli = (mca_base_component_list_item_t *) opal_list_get_next((opal_list_item_t *) bcol_cli);
continue;
}
}
if (NULL != include_sbgp_name) {
ML_VERBOSE(10,("INCLUDE compare %s to %s", include_sbgp_name,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sbgp_component->sbgp_version.mca_component_name));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if(0 != strcmp(include_sbgp_name,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sbgp_component->sbgp_version.mca_component_name)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* take the next element */
sbgp_cli = (sbgp_base_component_keyval_t *) opal_list_get_next((opal_list_item_t *) sbgp_cli);
bcol_cli = (mca_base_component_list_item_t *) opal_list_get_next((opal_list_item_t *) bcol_cli);
continue;
}
}
ML_VERBOSE(10,("Passed include %s exclude %s", include_sbgp_name, exclude_sbgp_name));
/* discover subgroup */
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Discover subgroup: hier level - %d.", i_hier));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
module = sbgp_component->select_procs(copy_procs, n_procs_in,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ml_module->comm,
sbgp_cli->key_value, &ptr_output);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (NULL == module) {
/* no module created */
n_procs_selected = 0;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* We must continue and participate in the allgather.
* It's not clear that one can enter this conditional
* during "normal" execution. We need to review
* all modules.
*/
/* THE CODE SNIPPET COMMENTED OUT BELOW IS DANGEROUS CODE THAT
* COULD RESULT IN A HANG - THE "CONTINUE" STATEMENT MAY RESULT IN
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
* RANKS BYPASSING THE ALLGATHER IN NON-SYMMETRIC CASES
*/
/*
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sbgp_cli = (sbgp_base_component_keyval_t *) opal_list_get_next((opal_list_item_t *) sbgp_cli);
bcol_cli = (mca_base_component_list_item_t *) opal_list_get_next((opal_list_item_t *) bcol_cli);
continue;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
*/
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* Skipping subgroups of size one will cause these processes to be missed in list of level one
* indices. */
} else if (NULL == module->group_list || (1 == module->group_size && i_hier)) {
/* bypass modules that have no group_list */
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
n_procs_selected = 0;
OBJ_RELEASE(module);
module=NULL;
} else {
n_procs_selected = module->group_size;
}
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Hier level - %d; group size - %d", i_hier, n_procs_selected));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* setup array indicating all procs that were selected */
for (i = 0; i < n_procs_in; i++) {
index_proc_selected[i] = 0;
}
/* figure out my rank in the subgroup */
my_rank_in_subgroup=-1;
ll_p1=-1;
in_allgather_value = 0;
coll/ml: further improve the hierarchy discovery to handle the case where a sbgp module fails to group any processes on any nodes. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31131.
2014-03-19 01:26:24 +04:00
if (n_procs_selected) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* I need to contribute to the vector */
for (group_index = 0; group_index < n_procs_selected; group_index++) {
/* set my rank within the group */
basesmuma: clean up code Several changes are contained in this commit: - Clean up tabs and trailing whitespaces - Use consistent indentation in changed files - Remove unused code. None of the removed code will ever have been used in a trunk build. - Clean up the smcm code quite a bit - Do not fflush stderr and use opal_output instead of fprintf. These changes have been tested on Cray XE-6 and PSM systems. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30533. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-02-03 21:01:46 +04:00
if (map_to_comm_ranks[module->group_list[group_index]] == my_rank_in_comm) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
my_rank_in_subgroup=group_index;
module->my_index = group_index;
/* currently the indecies are still given in terms of
* the rank in the list of remaining ranks */
my_rank_in_remaining_list=module->group_list[group_index];
}
}
if( -1 != my_rank_in_subgroup ) {
/* I am contributing to this subgroup */
#ifdef NEW_LEADER_SELECTION
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#if 0
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
int lleader_index;
/* Select the local leader */
lleader_index = coll_ml_select_leader(ml_module,module, map_to_comm_ranks,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
copy_procs,n_procs_selected);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
basesmuma: clean up code Several changes are contained in this commit: - Clean up tabs and trailing whitespaces - Use consistent indentation in changed files - Remove unused code. None of the removed code will ever have been used in a trunk build. - Clean up the smcm code quite a bit - Do not fflush stderr and use opal_output instead of fprintf. These changes have been tested on Cray XE-6 and PSM systems. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30533. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-02-03 21:01:46 +04:00
local_leader = map_to_comm_ranks[module->group_list[lleader_index]];
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#endif
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
#else
/* local leader is rank within list or remaining ranks */
basesmuma: clean up code Several changes are contained in this commit: - Clean up tabs and trailing whitespaces - Use consistent indentation in changed files - Remove unused code. None of the removed code will ever have been used in a trunk build. - Clean up the smcm code quite a bit - Do not fflush stderr and use opal_output instead of fprintf. These changes have been tested on Cray XE-6 and PSM systems. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30533. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-02-03 21:01:46 +04:00
local_leader = map_to_comm_ranks[module->group_list[0]];
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
#endif
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10,("The local leader selected for hierarchy %d is rank %d ",
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
i_hier, local_leader));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
basesmuma: clean up code Several changes are contained in this commit: - Clean up tabs and trailing whitespaces - Use consistent indentation in changed files - Remove unused code. None of the removed code will ever have been used in a trunk build. - Clean up the smcm code quite a bit - Do not fflush stderr and use opal_output instead of fprintf. These changes have been tested on Cray XE-6 and PSM systems. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30533. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-02-03 21:01:46 +04:00
ll_p1 = local_leader + 1;
if (local_leader == my_rank_in_comm) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
in_allgather_value =
index_proc_selected[my_rank_in_remaining_list] = -ll_p1;
} else {
in_allgather_value =
index_proc_selected[my_rank_in_remaining_list] = ll_p1;
}
}
}
/* gather the information from all the other remaining ranks */
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Call for comm_allreduce_pml."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = comm_allgather_pml(&in_allgather_value,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
all_selected, 1, MPI_INT, my_rank_in_list,
n_procs_in, map_to_comm_ranks ,ml_module->comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("comm_allreduce_pml failed."));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* do some sanity checks */
if( -1 != my_rank_in_subgroup ) {
ret = check_global_view_of_subgroups(n_procs_selected,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
n_procs_in, ll_p1, all_selected, module );
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("check_global_view_of_subgroups failed."));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
/*
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
** change the list of procs stored on the module to ranks within
** the communicator.
*/
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Change the list of procs; hier level - %d.", i_hier));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
for (group_index = 0; group_index < n_procs_selected; group_index++) {
module->group_list[group_index] = map_to_comm_ranks[module->group_list[group_index]];
/* set my rank within the group */
if (module->group_list[group_index] == ompi_comm_rank(ml_module->comm)) {
module->my_index = group_index;
}
}
/*
* accumulate data on the new subgroups created
*/
/*XXX*/
coll/ml: further improve the hierarchy discovery to handle the case where a sbgp module fails to group any processes on any nodes. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31131.
2014-03-19 01:26:24 +04:00
global_n_procs_selected = num_ranks_in_all_subgroups;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = get_new_subgroup_data(all_selected, n_procs_in,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
&array_of_all_subgroup_ranks,
&size_of_array_of_all_subgroup_ranks,
&list_of_ranks_in_all_subgroups,
&size_of_list_of_ranks_in_all_subgroups,
coll/ml: further improve the hierarchy discovery to handle the case where a sbgp module fails to group any processes on any nodes. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31131.
2014-03-19 01:26:24 +04:00
&num_ranks_in_all_subgroups,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
&num_total_subgroups, map_to_comm_ranks,i_hier);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if( OMPI_SUCCESS != ret ) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, (" Error: get_new_subgroup_data returned %d ",ret));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: further improve the hierarchy discovery to handle the case where a sbgp module fails to group any processes on any nodes. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31131.
2014-03-19 01:26:24 +04:00
/* the global number of processes selected at this level is the difference
* in the number of procs in all subgroups between this level and the
* last */
global_n_procs_selected = num_ranks_in_all_subgroups - global_n_procs_selected;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* am I done ? */
i_am_done=0;
if ( (all_selected[my_rank_in_list] == ll_p1) &&
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* if I was not a member of any group, still need to continue */
n_procs_selected ){
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
i_am_done = 1;
}
/* get my rank in the list */
n_remain = 0;
my_rank_in_list = -1;
for (i = 0; i < n_procs_in; i++) {
if (all_selected[i] > 0 ) {
/* this proc will not be used in the next hierarchy */
continue;
}
/* reset my_rank_in_list, n_procs_in */
copy_procs[n_remain] = copy_procs[i];
map_to_comm_ranks[n_remain] = map_to_comm_ranks[i];
if (my_proc == copy_procs[n_remain]){
my_rank_in_list = n_remain;
}
n_remain++;
}
/* check to make sure we did not get a size 1 group if more than
* one rank are still remaning to be grouped */
if ((1 == n_procs_selected) && n_remain > 1) {
OBJ_RELEASE(module);
n_procs_selected = 0;
}
if( 0 < n_procs_selected ) {
/* increment the level counter */
pair = &topo->component_pairs[n_hier];
/* add this to the list of sub-group/bcol pairs in use */
pair->subgroup_module = module;
pair->bcol_component = (mca_bcol_base_component_t *)
((mca_base_component_list_item_t *) bcol_cli)->cli_component;
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
pair->bcol_index = bcol_index;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* create bcol modules */
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Create bcol modules."));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
pair->bcol_modules = pair->bcol_component->collm_comm_query(module, &pair->num_bcol_modules);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* failed to create a new module */
if (OPAL_UNLIKELY(NULL == pair->bcol_modules)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Failed to create new modules."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERROR;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
if (pair->bcol_component->need_ordering) {
topo->topo_ordering_info.num_bcols_need_ordering += pair->num_bcol_modules;
}
/* Append new network contexts to our memory managment */
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Append new network contexts to our memory managment."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != append_new_network_context(pair))) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Exit with error. - append new network context"));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = OMPI_ERROR;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
for (i = 0; i < pair->num_bcol_modules; ++i) {
/* set the starting sequence number */
pair->bcol_modules[i]->squence_number_offset =
mca_coll_ml_component.base_sequence_number;
/* cache the sub-group size */
pair->bcol_modules[i]->size_of_subgroup=
module->group_size;
/* set the bcol id */
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
pair->bcol_modules[i]->bcol_id = (int16_t) bcol_index;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* Set bcol mode bits */
topo->all_bcols_mode &= (( mca_bcol_base_module_t *) pair->bcol_modules[i])->supported_mode;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/*
* set largest power of 2 for this group
*/
module->n_levels_pow2 = ml_fls(module->group_size);
module->pow_2 = 1 << module->n_levels_pow2;
n_hier++;
if (-1 == my_lowest_group_index) {
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
my_lowest_group_index = bcol_index;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
my_highest_group_index = bcol_index;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* if n_remain is 1, and the communicator size is not 1, and module
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
** is not NULL, I am done
*/
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if ((1 == n_remain) && (1 < original_group_size) &&
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(NULL != module)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
i_am_done = 1;
}
/* am I done ? */
if (1 == i_am_done) {
/* nothing more to do */
goto SelectionDone;
}
/* take the next element */
sbgp_cli = (sbgp_base_component_keyval_t *) opal_list_get_next((opal_list_item_t *) sbgp_cli);
bcol_cli = (mca_base_component_list_item_t *) opal_list_get_next((opal_list_item_t *) bcol_cli);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll/ml: further improve the hierarchy discovery to handle the case where a sbgp module fails to group any processes on any nodes. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31131.
2014-03-19 01:26:24 +04:00
/* if no processes were selected anywhere with this sbgp module don't bother
* incrementing the hierarchy index. this resolves issues where (for example)
* process binding is not enabled or supported. */
if (global_n_procs_selected) {
coll/ml: fix assertion failure that occurs when level 0 of the hierarchy fails to select any processes on any nodes. Also modified basesmsocket to only print debugging info to the framework output. cmr=v1.7.5:reviewer=jsquyres This commit was SVN r31071.
2014-03-14 23:39:00 +04:00
/* The way initialization is currently written *all* ranks MUST appear
* in the first level (0) of the hierarchy. If any rank is not in the first
* level then the calculation of gather/scatter offsets will be wrong.
* NTH: DO NOT REMOVE this assert until this changes! */
coll/ml: further improve the hierarchy discovery to handle the case where a sbgp module fails to group any processes on any nodes. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31131.
2014-03-19 01:26:24 +04:00
assert (i_hier || global_n_procs_selected == n_procs_in);
i_hier++;
coll/ml: fix assertion failure that occurs when level 0 of the hierarchy fails to select any processes on any nodes. Also modified basesmsocket to only print debugging info to the framework output. cmr=v1.7.5:reviewer=jsquyres This commit was SVN r31071.
2014-03-14 23:39:00 +04:00
}
coll/ml: improve the buffer size calculation and ensure the bcol_index in a hierarchy actually matches a bcol that is in use. There was a bug in one of the paths to calculate the ml buffer size. I fixed the bug and squashed all the paths together to avoid further issues (the result was correct in another path that calculated the same value). Additionally, the i_hier was being used as the bcol_index. This is not correct in a couple of cases so I added a variable to keep track of the real bcol_index. cmr=v1.8:reviewer=pasha This commit was SVN r31189.
2014-03-22 01:54:28 +04:00
++bcol_index;
coll/ml: fix assertion failure that occurs when level 0 of the hierarchy fails to select any processes on any nodes. Also modified basesmsocket to only print debugging info to the framework output. cmr=v1.7.5:reviewer=jsquyres This commit was SVN r31071.
2014-03-14 23:39:00 +04:00
n_procs_in = n_remain;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
SelectionDone:
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (topo->topo_ordering_info.num_bcols_need_ordering > 0) {
for (j = 0; j < n_hier; ++j) {
pair = &topo->component_pairs[j];
if (pair->bcol_component->need_ordering) {
for (i = 0; i < pair->num_bcol_modules; ++i) {
pair->bcol_modules[i]->next_inorder = &topo->topo_ordering_info.next_inorder;
}
}
}
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* If I was not done, it means that we skipped all subgroups and no hierarchy was build */
if (0 == i_am_done) {
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (NULL != include_sbgp_name || NULL != exclude_sbgp_name) {
/* User explicitly asked for specific type of topology, which generates empty group */
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
opal_show_help("help-mpi-coll-ml.txt",
"empty-sub-group", true,
NULL != include_sbgp_name ? include_sbgp_name : exclude_sbgp_name);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ret = OMPI_ERROR;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
ML_VERBOSE(10, ("Constructing empty hierarchy"));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ret = OMPI_SUCCESS;
goto exit_ERROR;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
topo->n_levels = n_hier;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* Find lowest and highest index of the groups in this communicator.
** This will be needed in deciding where in the hierarchical collective
** sequence of calls these particular groups belong.
** It is done with one allreduce call to save allreduce overhead.
*/
all_reduce_buffer2_in[0] = (short)my_lowest_group_index;
all_reduce_buffer2_in[1] = (short)-my_highest_group_index;
/* restore map to ranks for the original communicator */
for (i = 0; i < ompi_comm_size(ml_module->comm); i++) {
map_to_comm_ranks[i] = i;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ret = comm_allreduce_pml(all_reduce_buffer2_in, all_reduce_buffer2_out,
2, MPI_SHORT, ompi_comm_rank(ml_module->comm),
MPI_MIN, original_group_size,
map_to_comm_ranks, ml_module->comm);
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("comm_allreduce_pml failed. all_reduce_buffer2_in reduction"));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
goto exit_ERROR;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
topo->global_lowest_hier_group_index = all_reduce_buffer2_out[0];
topo->global_highest_hier_group_index = -all_reduce_buffer2_out[1];
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("The lowest index and highest index was successfully found."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ML_VERBOSE(10, ("ml_discover_hierarchy done, n_levels %d lowest_group_index %d highest_group_index %d,"
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
" original_group_size %d my_lowest_group_index %d my_highest_group_index %d",
topo->n_levels, topo->global_lowest_hier_group_index,
topo->global_highest_hier_group_index,
original_group_size,
my_lowest_group_index,
my_highest_group_index));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/*
* setup detailed subgroup information
*/
ret = ml_setup_full_tree_data(topo, ml_module->comm, my_highest_group_index,
map_to_comm_ranks,&num_total_subgroups,&array_of_all_subgroup_ranks,
&list_of_ranks_in_all_subgroups);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("comm_allreduce_pml failed: bcols_in_use reduction %d ",ret));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
goto exit_ERROR;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* cache the ML hierarchical description on the tree */
topo->number_of_all_subgroups = num_total_subgroups;
topo->array_of_all_subgroups = array_of_all_subgroup_ranks;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ml_init_k_nomial_trees(topo, list_of_ranks_in_all_subgroups, ompi_comm_rank(ml_module->comm));
/* Set the route table if know-root type of algorithms is used */
if (COLL_ML_STATIC_BCAST == mca_coll_ml_component.bcast_algorithm) {
ret = mca_coll_ml_fill_in_route_tab(topo, ml_module->comm);
if (OMPI_SUCCESS != ret) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_ERROR(("mca_coll_ml_fill_in_route_tab returned an error."));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/*
** If all ranks are selected, there will be a single rank that remains -
** the root of the last group. Check to make sure that all ranks are
** selected, and if not, return an error. We can't handle the collectives
** correctly with this module.
*/
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
exit_ERROR:
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Discovery done"));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* free temp resources */
if (NULL != all_selected) {
free(all_selected);
all_selected = NULL;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (NULL != copy_procs) {
free(copy_procs);
copy_procs = NULL;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (NULL != map_to_comm_ranks) {
free(map_to_comm_ranks);
map_to_comm_ranks = NULL;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (NULL != index_proc_selected) {
free(index_proc_selected);
index_proc_selected = NULL;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (NULL != bcols_in_use) {
free(bcols_in_use);
bcols_in_use = NULL;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (NULL != list_of_ranks_in_all_subgroups) {
free(list_of_ranks_in_all_subgroups);
list_of_ranks_in_all_subgroups = NULL;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return ret;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
void mca_coll_ml_allreduce_matrix_init(mca_coll_ml_module_t *ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
const mca_bcol_base_component_2_0_0_t *bcol_component)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
int op, dt, et;
for (op = 0; op < OMPI_OP_NUM_OF_TYPES; ++op) {
for (dt = 0; dt < OMPI_DATATYPE_MAX_PREDEFINED; ++dt) {
for (et = 0; et < BCOL_NUM_OF_ELEM_TYPES; ++et) {
ml_module->allreduce_matrix[op][dt][et] =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
bcol_component->coll_support(op, dt, et);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
}
}
int mca_coll_ml_fulltree_hierarchy_discovery(mca_coll_ml_module_t *ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int n_hierarchies)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
return mca_coll_ml_tree_hierarchy_discovery(ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
&ml_module->topo_list[COLL_ML_HR_FULL],
n_hierarchies, NULL, NULL);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
int mca_coll_ml_allreduce_hierarchy_discovery(mca_coll_ml_module_t *ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int n_hierarchies)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
mca_base_component_list_item_t *bcol_cli;
const mca_bcol_base_component_2_0_0_t *bcol_component;
sbgp_base_component_keyval_t *sbgp_cli;
const mca_sbgp_base_component_2_0_0_t *sbgp_component;
sbgp_cli = (sbgp_base_component_keyval_t *)
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
opal_list_get_first(&mca_sbgp_base_components_in_use);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
for (bcol_cli = (mca_base_component_list_item_t *)
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
opal_list_get_first(&mca_bcol_base_components_in_use);
(opal_list_item_t *) bcol_cli !=
opal_list_get_end(&mca_bcol_base_components_in_use);
bcol_cli = (mca_base_component_list_item_t *)
opal_list_get_next((opal_list_item_t *) bcol_cli),
sbgp_cli = (sbgp_base_component_keyval_t *)
opal_list_get_next((opal_list_item_t *) sbgp_cli)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
bcol_component = (mca_bcol_base_component_2_0_0_t *) bcol_cli->cli_component;
if (NULL != bcol_component->coll_support_all_types &&
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
!bcol_component->coll_support_all_types(BCOL_ALLREDUCE)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
mca_base_component_list_item_t *bcol_cli_next;
const mca_bcol_base_component_2_0_0_t *bcol_component_next;
bcol_cli_next = (mca_base_component_list_item_t *)
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
opal_list_get_next((opal_list_item_t *) bcol_cli);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
mca_coll_ml_component.need_allreduce_support = true;
mca_coll_ml_allreduce_matrix_init(ml_module, bcol_component);
sbgp_component = (mca_sbgp_base_component_2_0_0_t *)
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sbgp_cli->component.cli_component;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ML_VERBOSE(10, ("Topology build: sbgp %s will be excluded.",
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
sbgp_component->sbgp_version.mca_component_name));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* If there isn't additional component supports all types => print warning */
if (1 == opal_list_get_size(&mca_bcol_base_components_in_use) ||
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(opal_list_item_t *) bcol_cli_next ==
opal_list_get_end(&mca_bcol_base_components_in_use)) {
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
opal_show_help("help-mpi-coll-ml.txt",
"allreduce-not-supported", true,
bcol_component->bcol_version.mca_component_name);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
} else {
bcol_component_next = (mca_bcol_base_component_2_0_0_t *)
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
bcol_cli_next->cli_component;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (NULL != bcol_component_next->coll_support_all_types &&
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
!bcol_component_next->coll_support_all_types(BCOL_ALLREDUCE)) {
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
opal_show_help("help-mpi-coll-ml.txt",
"allreduce-alt-nosupport", true,
bcol_component->bcol_version.mca_component_name);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
return mca_coll_ml_tree_hierarchy_discovery(ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
&ml_module->topo_list[COLL_ML_HR_ALLREDUCE],
n_hierarchies, sbgp_component->sbgp_version.mca_component_name, NULL);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
return OMPI_SUCCESS;
}
int mca_coll_ml_fulltree_exclude_basesmsocket_hierarchy_discovery(mca_coll_ml_module_t *ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int n_hierarchies)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
return mca_coll_ml_tree_hierarchy_discovery(ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
&ml_module->topo_list[COLL_ML_HR_NBS],
n_hierarchies, "basesmsocket", NULL);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
int mca_coll_ml_fulltree_ptp_only_hierarchy_discovery(mca_coll_ml_module_t *ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int n_hierarchies)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
return mca_coll_ml_tree_hierarchy_discovery(ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
&ml_module->topo_list[COLL_ML_HR_SINGLE_PTP],
n_hierarchies, NULL, "p2p");
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
int mca_coll_ml_fulltree_iboffload_only_hierarchy_discovery(mca_coll_ml_module_t *ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
int n_hierarchies)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
return mca_coll_ml_tree_hierarchy_discovery(ml_module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
&ml_module->topo_list[COLL_ML_HR_SINGLE_IBOFFLOAD],
n_hierarchies, NULL, "ibnet");
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
#define IS_REACHABLE 1
#define IS_NOT_REACHABLE -1
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
static int mca_coll_ml_fill_in_route_tab(mca_coll_ml_topology_t *topo, ompi_communicator_t *comm)
{
int i, rc, level, comm_size = 0,
my_rank = ompi_comm_rank(comm);
int32_t **route_table = NULL;
int32_t *all_reachable_ranks = NULL;
struct ompi_proc_t **sbgp_procs = NULL;
mca_sbgp_base_module_t *sbgp_group = NULL;
comm_size = ompi_comm_size(comm);
all_reachable_ranks = (int32_t *) malloc(comm_size * sizeof(int32_t));
if (NULL == all_reachable_ranks) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rc = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
for (i = 0; i < comm_size; ++i) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
all_reachable_ranks[i] = IS_NOT_REACHABLE;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
route_table = (int32_t **) calloc(topo->n_levels, sizeof(int32_t *));
if (NULL == route_table) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rc = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
Fixing broken dependency between ML/BCOLS This is hot-fix patch for the issue reported by Ralph. In future we plan to restructure ml data structure layout. Tested by Nathan. cmr=v1.7.5:ticket=trac:4158 This commit was SVN r30619. The following Trac tickets were found above: Ticket 4158 --> https://svn.open-mpi.org/trac/ompi/ticket/4158
2014-02-07 23:15:45 +04:00
topo->route_vector = (mca_bcol_base_route_info_t *)
calloc(comm_size, sizeof(mca_bcol_base_route_info_t));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (NULL == topo->route_vector) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rc = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
all_reachable_ranks[my_rank] = IS_REACHABLE;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
for (level = 0; level < topo->n_levels; ++level) {
sbgp_group = topo->component_pairs[level].subgroup_module;
route_table[level] = (int32_t *) malloc(comm_size * sizeof(int32_t));
if (NULL == route_table[level]) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
rc = OMPI_ERR_OUT_OF_RESOURCE;
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
for (i = 0; i < comm_size; ++i) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
if (IS_NOT_REACHABLE != all_reachable_ranks[i]) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
all_reachable_ranks[i] = sbgp_group->my_index;
}
}
rc = comm_allreduce_pml(all_reachable_ranks,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
route_table[level],
comm_size,
MPI_INT, sbgp_group->my_index,
MPI_MAX, sbgp_group->group_size,
sbgp_group->group_list,
comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OMPI_SUCCESS != rc) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("comm_allreduce failed."));
Per Marco, rename ERROR tags to exit_ERROR to avoid cygwin reserved name issues. Refs trac:4085 This commit was SVN r30239. The following Trac tickets were found above: Ticket 4085 --> https://svn.open-mpi.org/trac/ompi/ticket/4085
2014-01-10 22:00:49 +04:00
goto exit_ERROR;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
for (i = 0; i < comm_size; ++i) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
if (IS_NOT_REACHABLE !=
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
route_table[level][i]) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
all_reachable_ranks[i] = IS_REACHABLE;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
}
}
assert(0 < level);
/* If there are unreachable ranks =>
reach them through leader of my upper layer */
for (i = 0; i < comm_size; ++i) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
if (IS_NOT_REACHABLE ==
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
route_table[level - 1][i]) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
route_table[level - 1][i] = 0;
}
}
free(all_reachable_ranks);
for (i = 0; i < comm_size; ++i) {
for (level = 0; level < topo->n_levels; ++level) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
if (IS_NOT_REACHABLE != route_table[level][i]) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
topo->route_vector[i].level = level;
topo->route_vector[i].rank = route_table[level][i];
break;
}
}
}
#if OPAL_ENABLE_DEBUG
#define COLL_ML_ROUTE_BUFF_SIZE (1024*1024)
For the love of all that is holy, do not put 1MB arrays on the stack. This was causing JVMs to run out of stack space, and all manner of badness ensued. Instead, use the heap -- that's what it's there for. cmr=v1.7.5:reviewer=rhc:subject=make coll/ml use the heap for large debug array This commit was SVN r31073.
2014-03-15 00:39:39 +04:00
/* Only bother creating the string if we're actually going to
print it out (i.e., if the verbose level is >= 10) */
if (mca_coll_ml_component.verbose >= 10) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
int ii, jj;
For the love of all that is holy, do not put 1MB arrays on the stack. This was causing JVMs to run out of stack space, and all manner of badness ensued. Instead, use the heap -- that's what it's there for. cmr=v1.7.5:reviewer=rhc:subject=make coll/ml use the heap for large debug array This commit was SVN r31073.
2014-03-15 00:39:39 +04:00
char *buff, *output;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
For the love of all that is holy, do not put 1MB arrays on the stack. This was causing JVMs to run out of stack space, and all manner of badness ensued. Instead, use the heap -- that's what it's there for. cmr=v1.7.5:reviewer=rhc:subject=make coll/ml use the heap for large debug array This commit was SVN r31073.
2014-03-15 00:39:39 +04:00
output = buff = calloc(1, COLL_ML_ROUTE_BUFF_SIZE);
assert(NULL != output);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
sprintf(output, "ranks: ");
output = buff + strlen(buff);
assert(COLL_ML_ROUTE_BUFF_SIZE + buff > output);
for(ii = 0; ii < comm_size; ++ii) {
sprintf(output, " %2d", ii);
output = buff + strlen(buff);
assert(COLL_ML_ROUTE_BUFF_SIZE + buff > output);
}
for (ii = 0; ii < topo->n_levels; ++ii) {
sprintf(output, "\nlevel: %d ", ii);
output = buff + strlen(buff);
assert(COLL_ML_ROUTE_BUFF_SIZE + buff > output);
for(jj = 0; jj < comm_size; ++jj) {
sprintf(output, " %2d", route_table[ii][jj]);
output = buff + strlen(buff);
assert(COLL_ML_ROUTE_BUFF_SIZE + buff > output);
}
}
sprintf(output, "\n\nThe vector is:\n============\nranks: ");
output = buff + strlen(buff);
assert(COLL_ML_ROUTE_BUFF_SIZE + buff > output);
for(ii = 0; ii < comm_size; ++ii) {
sprintf(output, " %6d", ii);
output = buff + strlen(buff);
assert(COLL_ML_ROUTE_BUFF_SIZE + buff > output);
}
sprintf(output, "\nlevel x rank: ");
output = buff + strlen(buff);
assert(COLL_ML_ROUTE_BUFF_SIZE + buff > output);
for(ii = 0; ii < comm_size; ++ii) {
sprintf(output, " (%d, %d)",
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
topo->route_vector[ii].level,
topo->route_vector[ii].rank);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
output = buff + strlen(buff);
assert(COLL_ML_ROUTE_BUFF_SIZE + buff > output);
}
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("\nThe table is:\n============%s", buff));
For the love of all that is holy, do not put 1MB arrays on the stack. This was causing JVMs to run out of stack space, and all manner of badness ensued. Instead, use the heap -- that's what it's there for. cmr=v1.7.5:reviewer=rhc:subject=make coll/ml use the heap for large debug array This commit was SVN r31073.
2014-03-15 00:39:39 +04:00
free(buff);
Remove extraneous "while(0)". Oops. cmr=v1.7.5:ticket=trac:4395 This commit was SVN r31075. The following Trac tickets were found above: Ticket 4395 --> https://svn.open-mpi.org/trac/ompi/ticket/4395
2014-03-15 00:41:54 +04:00
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
#endif
for (level = 0; level < topo->n_levels; ++level) {
free(route_table[level]);
}
free(route_table);
return OMPI_SUCCESS;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
exit_ERROR:
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Exit with error status - %d.", rc));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (NULL != route_table) {
for (level = 0; level < topo->n_levels; ++level) {
if (NULL != route_table[level]) {
free(route_table[level]);
}
}
free(route_table);
}
if (NULL != sbgp_procs) {
free(sbgp_procs);
}
if (NULL != all_reachable_ranks) {
free(all_reachable_ranks);
}
return rc;
}
static void init_coll_func_pointers(mca_coll_ml_module_t *ml_module)
{
mca_coll_base_module_2_0_0_t *coll_base = &ml_module->super;
int iboffload_used =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
mca_coll_ml_check_if_bcol_is_used("iboffload", ml_module, COLL_ML_TOPO_MAX);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* initialize coll component function pointers */
coll_base->coll_module_enable = ml_module_enable;
coll_base->ft_event = NULL;
if (mca_coll_ml_component.disable_allgather) {
coll_base->coll_allgather = NULL;
coll_base->coll_iallgather = NULL;
} else {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll_base->coll_allgather = mca_coll_ml_allgather;
coll_base->coll_iallgather = mca_coll_ml_allgather_nb;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
coll_base->coll_allgatherv = NULL;
if (mca_coll_ml_component.use_knomial_allreduce) {
if (true == mca_coll_ml_component.need_allreduce_support) {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll_base->coll_allreduce = mca_coll_ml_allreduce_dispatch;
coll_base->coll_iallreduce = mca_coll_ml_allreduce_dispatch_nb;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
} else {
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll_base->coll_allreduce = mca_coll_ml_allreduce;
coll_base->coll_iallreduce = mca_coll_ml_allreduce_nb;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
} else {
coll_base->coll_allreduce = NULL;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll_base->coll_alltoall = NULL;
coll_base->coll_ialltoall = NULL;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll_base->coll_alltoallv = NULL;
coll_base->coll_alltoallw = NULL;
coll_base->coll_barrier = mca_coll_ml_barrier_intra;
/* Use the sequential broadcast */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (COLL_ML_SEQ_BCAST == mca_coll_ml_component.bcast_algorithm) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll_base->coll_bcast = mca_coll_ml_bcast_sequential_root;
} else {
coll_base->coll_bcast = mca_coll_ml_parallel_bcast;
}
coll_base->coll_exscan = NULL;
coll_base->coll_gather = NULL;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/*
coll_base->coll_gather = mca_coll_ml_gather;
*/
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* Current iboffload/ptpcoll version have no support for gather */
if (iboffload_used ||
mca_coll_ml_check_if_bcol_is_used("ptpcoll", ml_module, COLL_ML_TOPO_MAX)) {
coll_base->coll_gather = NULL;
}
coll_base->coll_gatherv = NULL;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (mca_coll_ml_component.disable_reduce) {
coll_base->coll_reduce = NULL;
} else {
coll_base->coll_reduce = mca_coll_ml_reduce;
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll_base->coll_reduce_scatter = NULL;
coll_base->coll_scan = NULL;
coll_base->coll_scatter = NULL;
#if 0
coll_base->coll_scatter = mca_coll_ml_scatter_sequential;
#endif
coll_base->coll_scatterv = NULL;
coll_base->coll_iallgatherv = NULL;
coll_base->coll_ialltoallv = NULL;
coll_base->coll_ialltoallw = NULL;
coll_base->coll_ibarrier = mca_coll_ml_ibarrier_intra;
coll_base->coll_ibcast = mca_coll_ml_parallel_bcast_nb;
coll_base->coll_iexscan = NULL;
coll_base->coll_igather = NULL;
coll_base->coll_igatherv = NULL;
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
coll_base->coll_ireduce = mca_coll_ml_reduce_nb;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll_base->coll_ireduce_scatter = NULL;
coll_base->coll_iscan = NULL;
coll_base->coll_iscatter = NULL;
coll_base->coll_iscatterv = NULL;
}
static int init_lists(mca_coll_ml_module_t *ml_module)
{
mca_coll_ml_component_t *cs = &mca_coll_ml_component;
int num_elements = cs->free_list_init_size;
int max_elements = cs->free_list_max_size;
int elements_per_alloc = cs->free_list_grow_size;
size_t length_payload = 0;
size_t length;
int ret;
/* initialize full message descriptors - moving this to the
* module, as the fragment has resrouce requirements that
* are communicator dependent */
/* no data associated with the message descriptor */
length = sizeof(mca_coll_ml_descriptor_t);
ret = ompi_free_list_init_ex_new(&(ml_module->message_descriptors), length,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
opal_cache_line_size, OBJ_CLASS(mca_coll_ml_descriptor_t),
length_payload, 0,
num_elements, max_elements, elements_per_alloc,
NULL,
init_ml_message_desc, ml_module);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OPAL_UNLIKELY(OMPI_SUCCESS != ret)) {
ML_ERROR(("ompi_free_list_init_ex_new exit with error"));
return ret;
}
/* initialize fragement descriptors - always associate one fragment
* descriptr with full message descriptor, so that we can minimize
* small message latency */
/* create a free list of fragment descriptors */
/*length_payload=sizeof(something);*/
length = sizeof(mca_coll_ml_fragment_t);
ret = ompi_free_list_init_ex_new(&(ml_module->fragment_descriptors), length,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
opal_cache_line_size, OBJ_CLASS(mca_coll_ml_fragment_t),
length_payload, 0,
num_elements, max_elements, elements_per_alloc,
NULL,
init_ml_fragment_desc, ml_module);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OMPI_SUCCESS != ret) {
ML_ERROR(("ompi_free_list_init_ex_new exit with error"));
return ret;
}
return OMPI_SUCCESS;
}
static int check_for_max_supported_ml_modules(struct ompi_communicator_t *comm)
{
int i, ret;
mca_coll_ml_component_t *cs = &mca_coll_ml_component;
int *comm_ranks = NULL;
comm_ranks = (int *)calloc(ompi_comm_size(comm), sizeof(int));
if (OPAL_UNLIKELY(NULL == comm_ranks)) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Cannot allocate memory."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return OMPI_ERR_OUT_OF_RESOURCE;
}
for (i = 0; i < ompi_comm_size(comm); i++) {
comm_ranks[i] = i;
}
ret = comm_allreduce_pml(&cs->max_comm, &cs->max_comm,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
1 , MPI_INT, ompi_comm_rank(comm),
MPI_MIN, ompi_comm_size(comm), comm_ranks,
comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
if (OMPI_SUCCESS != ret) {
ML_ERROR(("comm_allreduce - failed to collect max_comm data"));
return ret;
}
if (0 >= cs->max_comm ||
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ompi_comm_size(comm) < cs->min_comm_size) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return OMPI_ERROR;
} else {
--cs->max_comm;
}
free(comm_ranks);
return OMPI_SUCCESS;
}
#if OPAL_ENABLE_DEBUG
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
#define DEBUG_ML_COMM_QUERY() \
do { \
static int verbosity_level = 5; \
static int module_num = 0; \
ML_VERBOSE(10, ("ML module - %p num %d for comm - %p, " \
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
"comm size - %d, ML component prio - %d.", \
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ml_module, ++module_num, comm, ompi_comm_size(comm), *priority)); \
/* For now I want to always print that we enter ML - \
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
at the past there was an issue that we did not enter ML and actually run with tuned. \
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
Still I do not want to print it for each module - only for the first. */ \
ML_VERBOSE(verbosity_level, ("ML module - %p was successfully created", ml_module)); \
verbosity_level = 10; \
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
} while(0)
#else
#define DEBUG_ML_COMM_QUERY()
#endif
static int mca_coll_ml_need_multi_topo(int bcol_collective)
{
mca_base_component_list_item_t *bcol_cli;
const mca_bcol_base_component_2_0_0_t *bcol_component;
for (bcol_cli = (mca_base_component_list_item_t *)
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
opal_list_get_first(&mca_bcol_base_components_in_use);
(opal_list_item_t *) bcol_cli !=
opal_list_get_end(&mca_bcol_base_components_in_use);
bcol_cli = (mca_base_component_list_item_t *)
opal_list_get_next((opal_list_item_t *) bcol_cli)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
bcol_component = (mca_bcol_base_component_2_0_0_t *) bcol_cli->cli_component;
if (NULL != bcol_component->coll_support_all_types &&
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
!bcol_component->coll_support_all_types(bcol_collective)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return true;
}
}
return false;
}
/* We may call this function ONLY AFTER algorithm initialization */
static int setup_bcast_table(mca_coll_ml_module_t *module)
{
mca_coll_ml_component_t *cm = &mca_coll_ml_component;
coll/ml: update the coll_ml_enable_fragmentation variable to support the option to autodetect whether fragmentation should be enabled cmr=v1.7.3:ticket=trac:3717 This commit was SVN r29065. The following Trac tickets were found above: Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
2013-08-27 20:36:54 +04:00
bool has_zero_copy;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* setup bcast index table */
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (COLL_ML_STATIC_BCAST == cm->bcast_algorithm) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
module->bcast_fn_index_table[0] = ML_BCAST_SMALL_DATA_KNOWN;
coll/ml: update the coll_ml_enable_fragmentation variable to support the option to autodetect whether fragmentation should be enabled cmr=v1.7.3:ticket=trac:3717 This commit was SVN r29065. The following Trac tickets were found above: Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
2013-08-27 20:36:54 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
has_zero_copy = !!(MCA_BCOL_BASE_ZERO_COPY &
module->coll_ml_bcast_functions[ML_BCAST_LARGE_DATA_KNOWN]->topo_info->all_bcols_mode);
coll/ml: update the coll_ml_enable_fragmentation variable to support the option to autodetect whether fragmentation should be enabled cmr=v1.7.3:ticket=trac:3717 This commit was SVN r29065. The following Trac tickets were found above: Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
2013-08-27 20:36:54 +04:00
if (1 == cm->enable_fragmentation || (2 == cm->enable_fragmentation && !has_zero_copy)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
module->bcast_fn_index_table[1] = ML_BCAST_SMALL_DATA_KNOWN;
coll/ml: update the coll_ml_enable_fragmentation variable to support the option to autodetect whether fragmentation should be enabled cmr=v1.7.3:ticket=trac:3717 This commit was SVN r29065. The following Trac tickets were found above: Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
2013-08-27 20:36:54 +04:00
} else if (!has_zero_copy) {
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
opal_show_help("help-mpi-coll-ml.txt",
"fragmentation-disabled", true);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return OMPI_ERROR;
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
} else {
module->bcast_fn_index_table[1] = ML_BCAST_LARGE_DATA_KNOWN;
}
} else {
module->bcast_fn_index_table[0] = ML_BCAST_SMALL_DATA_UNKNOWN;
coll/ml: update the coll_ml_enable_fragmentation variable to support the option to autodetect whether fragmentation should be enabled cmr=v1.7.3:ticket=trac:3717 This commit was SVN r29065. The following Trac tickets were found above: Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
2013-08-27 20:36:54 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
if (NULL == module->coll_ml_bcast_functions[ML_BCAST_LARGE_DATA_UNKNOWN]) {
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
opal_show_help("help-mpi-coll-ml.txt",
"static-bcast-disabled", true);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
return OMPI_ERROR;
}
coll/ml: update the coll_ml_enable_fragmentation variable to support the option to autodetect whether fragmentation should be enabled cmr=v1.7.3:ticket=trac:3717 This commit was SVN r29065. The following Trac tickets were found above: Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
2013-08-27 20:36:54 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
has_zero_copy = !!(MCA_BCOL_BASE_ZERO_COPY &
module->coll_ml_bcast_functions[ML_BCAST_LARGE_DATA_UNKNOWN]->topo_info->all_bcols_mode);
coll/ml: update the coll_ml_enable_fragmentation variable to support the option to autodetect whether fragmentation should be enabled cmr=v1.7.3:ticket=trac:3717 This commit was SVN r29065. The following Trac tickets were found above: Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
2013-08-27 20:36:54 +04:00
if (1 == cm->enable_fragmentation || (2 == cm->enable_fragmentation && !has_zero_copy)) {
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
module->bcast_fn_index_table[1] = ML_BCAST_SMALL_DATA_UNKNOWN;
coll/ml: update the coll_ml_enable_fragmentation variable to support the option to autodetect whether fragmentation should be enabled cmr=v1.7.3:ticket=trac:3717 This commit was SVN r29065. The following Trac tickets were found above: Ticket 3717 --> https://svn.open-mpi.org/trac/ompi/ticket/3717
2013-08-27 20:36:54 +04:00
} else if (!has_zero_copy) {
coll/ml : Replace longer error message with opal_show_help; thanks Jeff for identifying those This commit was SVN r31279.
2014-03-28 23:25:54 +04:00
opal_show_help("help-mpi-coll-ml.txt",
"fragmentation-disabled", true);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
return OMPI_ERROR;
} else {
/* If the topology support zero level and no fragmentation was requested */
module->bcast_fn_index_table[1] = ML_BCAST_LARGE_DATA_UNKNOWN;
}
}
return OMPI_SUCCESS;
}
static void ml_check_for_enabled_topologies (int map[][MCA_COLL_MAX_NUM_SUBTYPES], mca_coll_ml_topology_t *topo_list)
{
int coll_i, st_i;
for (coll_i = 0; coll_i < MCA_COLL_MAX_NUM_COLLECTIVES; coll_i++) {
for (st_i = 0; st_i < MCA_COLL_MAX_NUM_SUBTYPES; st_i++) {
if (map[coll_i][st_i] > -1) {
/* The topology is used, so set it to enabled */
assert(map[coll_i][st_i] <= COLL_ML_TOPO_MAX);
topo_list[map[coll_i][st_i]].status = COLL_ML_TOPO_ENABLED;
}
}
}
}
static void setup_default_topology_map(mca_coll_ml_module_t *ml_module)
{
int i, j;
for (i = 0; i < MCA_COLL_MAX_NUM_COLLECTIVES; i++) {
for (j = 0; j < MCA_COLL_MAX_NUM_SUBTYPES; j++) {
ml_module->collectives_topology_map[i][j] = -1;
}
}
ml_module->collectives_topology_map[ML_BARRIER][ML_BARRIER_DEFAULT] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_BCAST][ML_BCAST_SMALL_DATA_KNOWN] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_BCAST][ML_BCAST_SMALL_DATA_UNKNOWN] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_BCAST][ML_BCAST_SMALL_DATA_SEQUENTIAL] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_BCAST][ML_BCAST_LARGE_DATA_KNOWN] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_BCAST][ML_BCAST_LARGE_DATA_UNKNOWN] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_BCAST][ML_BCAST_LARGE_DATA_UNKNOWN] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_ALLGATHER][ML_SMALL_DATA_ALLGATHER] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_ALLGATHER][ML_LARGE_DATA_ALLGATHER] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_GATHER][ML_SMALL_DATA_GATHER] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_GATHER][ML_LARGE_DATA_GATHER] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_ALLTOALL][ML_SMALL_DATA_ALLTOALL] = COLL_ML_HR_SINGLE_IBOFFLOAD;
ml_module->collectives_topology_map[ML_ALLTOALL][ML_LARGE_DATA_ALLTOALL] = COLL_ML_HR_SINGLE_IBOFFLOAD;
ml_module->collectives_topology_map[ML_ALLREDUCE][ML_SMALL_DATA_ALLREDUCE] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_ALLREDUCE][ML_LARGE_DATA_ALLREDUCE] = COLL_ML_HR_FULL;
if (mca_coll_ml_need_multi_topo(BCOL_ALLREDUCE)) {
ml_module->collectives_topology_map[ML_ALLREDUCE][ML_SMALL_DATA_EXTRA_TOPO_ALLREDUCE] = COLL_ML_HR_ALLREDUCE;
ml_module->collectives_topology_map[ML_ALLREDUCE][ML_LARGE_DATA_EXTRA_TOPO_ALLREDUCE] = COLL_ML_HR_ALLREDUCE;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ml_module->collectives_topology_map[ML_REDUCE][ML_SMALL_DATA_REDUCE] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_REDUCE][ML_LARGE_DATA_REDUCE] = COLL_ML_HR_FULL;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ml_module->collectives_topology_map[ML_SCATTER][ML_SCATTER_SMALL_DATA_KNOWN] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_SCATTER][ML_SCATTER_N_DATASIZE_BINS] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_SCATTER][ML_SCATTER_SMALL_DATA_UNKNOWN] = COLL_ML_HR_FULL;
ml_module->collectives_topology_map[ML_SCATTER][ML_SCATTER_SMALL_DATA_SEQUENTIAL] = COLL_ML_HR_FULL;
}
#define GET_CF(I, J) (&mca_coll_ml_component.coll_config[I][J]);
static void load_cached_config(mca_coll_ml_module_t *ml_module)
{
int c_idx, m_idx, alg;
per_collective_configuration_t *cf = NULL;
for (c_idx = 0; c_idx < ML_NUM_OF_FUNCTIONS; c_idx++) {
for (m_idx = 0; m_idx < ML_NUM_MSG; m_idx++) {
cf = GET_CF(c_idx, m_idx);
/* load topology tunings */
if (ML_UNDEFINED != cf->topology_id &&
ML_UNDEFINED != cf->algorithm_id) {
alg =
cf->algorithm_id;
ml_module->collectives_topology_map[c_idx][alg] =
cf->topology_id;
}
}
}
}
/* Pasha: In future I would suggest to convert this configuration to some sophisticated mca parameter or
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
even configuration file. On this stage of project I will set it statically and later we will change it
to run time parameter */
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
static void setup_topology_coll_map(mca_coll_ml_module_t *ml_module)
{
/* Load default topology setup */
setup_default_topology_map(ml_module);
/* Load configuration file */
load_cached_config(ml_module);
ml_check_for_enabled_topologies(ml_module->collectives_topology_map, ml_module->topo_list);
}
/* query to see if the module is available for use on the given
* communicator, and if so, what it's priority is. This is where
* the backing shared-memory file is created.
*/
mca_coll_base_module_t *
mca_coll_ml_comm_query(struct ompi_communicator_t *comm, int *priority)
{
/* local variables */
int ret = OMPI_SUCCESS;
mca_coll_ml_module_t *ml_module = NULL;
mca_coll_ml_component_t *cs = &mca_coll_ml_component;
bool iboffload_was_requested = mca_coll_ml_check_if_bcol_is_requested("iboffload");
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("ML comm query start."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/**
* No support for inter-communicator yet.
*/
if (OMPI_COMM_IS_INTER(comm)) {
*priority = -1;
return NULL;
}
/**
* If it is inter-communicator and size is less than 2 we have specialized modules
* to handle the intra collective communications.
*/
if (OMPI_COMM_IS_INTRA(comm) && ompi_comm_size(comm) < 2) {
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("It is inter-communicator and size is less than 2."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
*priority = -1;
return NULL;
}
/**
* In current implementation we limit number of supported ML modules in cases when
* iboffload companent was requested
*/
if (iboffload_was_requested) {
ret = check_for_max_supported_ml_modules(comm);
if (OMPI_SUCCESS != ret) {
/* We have nothing to cleanup yet, so just return NULL */
ML_VERBOSE(10, ("check_for_max_supported_ml_modules returns ERROR, return NULL"));
*priority = -1;
return NULL;
}
}
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Create ML module start."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* allocate and initialize an ml module */
ml_module = OBJ_NEW(mca_coll_ml_module_t);
if (NULL == ml_module) {
return NULL;
}
/* Get our priority */
*priority = cs->ml_priority;
/** Set initial ML values **/
ml_module->comm = comm;
/* set the starting sequence number */
ml_module->collective_sequence_num = cs->base_sequence_number;
ml_module->no_data_collective_sequence_num = cs->base_sequence_number;
/* initialize the size of the largest collective communication description */
ml_module->max_fn_calls = 0;
#ifdef NEW_LEADER_SELECTION
coll_ml_construct_resource_graphs(ml_module);
#endif
/* Set topology - function map */
setup_topology_coll_map(ml_module);
/**
* This is the core of the function:
* setup communicator hierarchy - the ml component is available for
* caching information about the sbgp modules selected.
*/
ret = ml_discover_hierarchy(ml_module);
if (OMPI_SUCCESS != ret) {
coll/ml: move error messages to verbose output There are situations where coll/ml does not initialize properly. These will eventually need to be fixed but in the meantime it is better to not always print an error message because the collective framework can still fall back on another collective module. This commit reduces the verbose output. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31129.
2014-03-19 01:26:10 +04:00
ML_VERBOSE(1, ("ml_discover_hierarchy exited with error."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
goto CLEANUP;
}
/* gvm Disabled for debuggin */
ret = mca_coll_ml_build_filtered_fn_table(ml_module);
if (OMPI_SUCCESS != ret) {
coll/ml: move error messages to verbose output There are situations where coll/ml does not initialize properly. These will eventually need to be fixed but in the meantime it is better to not always print an error message because the collective framework can still fall back on another collective module. This commit reduces the verbose output. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31129.
2014-03-19 01:26:10 +04:00
ML_VERBOSE(1, ("mca_coll_ml_build_filtered_fn_table returned an error."));
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
goto CLEANUP;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
/* Generate active bcols list */
generate_active_bcols_list(ml_module);
/* setup collective schedules - note that a given bcol may have more than
one module instantiated. We may want to use the same collective cap
capabilities over more than one set of procs. Each module will store
the relevant information for a given set of procs */
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Call for setup schedule."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = ml_coll_schedule_setup(ml_module);
if (OMPI_SUCCESS != ret) {
coll/ml: move error messages to verbose output There are situations where coll/ml does not initialize properly. These will eventually need to be fixed but in the meantime it is better to not always print an error message because the collective framework can still fall back on another collective module. This commit reduces the verbose output. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31129.
2014-03-19 01:26:10 +04:00
ML_VERBOSE(1, ("ml_coll_schedule_setup exit with error"));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
goto CLEANUP;
}
/* Setup bcast table */
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Setup bcast table"));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = setup_bcast_table(ml_module);
if (OMPI_SUCCESS != ret) {
coll/ml: move error messages to verbose output There are situations where coll/ml does not initialize properly. These will eventually need to be fixed but in the meantime it is better to not always print an error message because the collective framework can still fall back on another collective module. This commit reduces the verbose output. cmr=v1.7.5:reviewer=manjugv This commit was SVN r31129.
2014-03-19 01:26:10 +04:00
ML_VERBOSE(1, ("setup_bcast_table exit with error"));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
goto CLEANUP;
}
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Setup pointer to collectives calls."));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
init_coll_func_pointers(ml_module);
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("Setup free lists"));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = init_lists(ml_module);
if (OMPI_SUCCESS != ret) {
goto CLEANUP;
}
DEBUG_ML_COMM_QUERY();
/* Compute the bruck's buffer constant -- temp buffer requirements */
{
int comm_size =ompi_comm_size(comm);
int count = 1, log_comm_size = 0;
/* compute log of comm_size */
while (count < comm_size) {
count = count << 1;
log_comm_size++;
}
ml_module->brucks_buffer_threshold_const =
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
(comm_size / 2 + comm_size % 2) * (log_comm_size) ;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ml_module->log_comm_size = log_comm_size;
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
}
if (iboffload_was_requested) {
/* HACK: Calling memory sync barrier first time to make sure
* that iboffload create qps for service barrier in right order,
* otherwise we may have deadlock and really nasty data corruptions.
* If you plan to remove this one - please talk to me first.
* Pasha.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Work around for deadlock caused by connection setup
for asyc service barrier. Asyc service barrier use own set of
MQ and QP _BUT_ the exchange operation uses the MQ that is used for
primary set of collectives operations like Allgahter, Barrier,etc.
As result exchange wait operation could be pushed to primary MQ and
cause dead-lock.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Create connection for service barrier and memory address exchange
for ml buffers and asyc service barrier
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
*/
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
ret = mca_coll_ml_memsync_intra(ml_module, 0);
if (OMPI_SUCCESS != ret) {
goto CLEANUP;
}
opal_progress();
}
/* The module is ready */
ml_module->initialized = true;
return &(ml_module->super);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
CLEANUP:
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* Vasily: RLG: Need to cleanup free lists */
if (NULL != ml_module) {
OBJ_RELEASE(ml_module);
}
return NULL;
}
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
/* copied slightly modified from coll/hcoll */
#define ML_SAVE_FALLBACK(_coll_ml, _coll) \
do { \
_coll_ml->fallback.coll_ ## _coll = comm->c_coll.coll_ ## _coll; \
_coll_ml->fallback.coll_ ## _coll ## _module = comm->c_coll.coll_ ## _coll ## _module; \
if (comm->c_coll.coll_ ## _coll && comm->c_coll.coll_ ## _coll ## _module) { \
OBJ_RETAIN(_coll_ml->fallback.coll_ ## _coll ## _module); \
} \
} while(0)
static void ml_save_fallback_colls (mca_coll_ml_module_t *coll_ml,
struct ompi_communicator_t *comm)
{
memset (&coll_ml->fallback, 0, sizeof (coll_ml->fallback));
/* save lower-priority collectives to handle cases not yet handled
* by coll/ml */
ML_SAVE_FALLBACK(coll_ml, allreduce);
ML_SAVE_FALLBACK(coll_ml, allgather);
ML_SAVE_FALLBACK(coll_ml, reduce);
coll/ml: fix leaks in coll/ml resources This patch fixes two leaks: - Fix typo in fallback collective code that caused coll/ml to retain the ibcast module twice but only release it once. One of those ibcast saves was supposed to be bcast. - Do not check for module initialization in the module destructor. It is possible to destruct a module that is partially setup. cmr=v1.8:reviewer=manjugv This commit was SVN r31187.
2014-03-22 01:54:14 +04:00
ML_SAVE_FALLBACK(coll_ml, bcast);
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ML_SAVE_FALLBACK(coll_ml, iallreduce);
ML_SAVE_FALLBACK(coll_ml, iallgather);
ML_SAVE_FALLBACK(coll_ml, ireduce);
ML_SAVE_FALLBACK(coll_ml, ibcast);
}
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/*
* Init module on the communicator
*/
static int
ml_module_enable(mca_coll_base_module_t *module,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
struct ompi_communicator_t *comm)
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
{
/* local variables */
char output_buffer[2 * MPI_MAX_OBJECT_NAME];
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ml_save_fallback_colls ((mca_coll_ml_module_t *) module, comm);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
memset(&output_buffer[0], 0, sizeof(output_buffer));
snprintf(output_buffer, sizeof(output_buffer), "%s (cid %d)", comm->c_name,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
comm->c_contextid);
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
Remove unnecessary \n's in ML_VERBOSE and ML_ERROR. Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE. Also mark a few places where opal_show_help() should have been used; Manju will take care of these. This commit was SVN r31104.
2014-03-18 16:24:32 +04:00
ML_VERBOSE(10, ("coll:ml:enable: new communicator: %s.", output_buffer));
Adding Hierarchical Collectives project to the Open MPI trunk. The project includes following components and frameworks: - ML Collective component - NETPATTERNS and COMMPATTERNS common components - BCOL framework - SBGP framework Note: By default the ML collective component is disabled. In order to enable new collectives user should bump up the priority of ml component (coll_ml_priority) ============================================= Primary Contributors (in alphabetical order): Ishai Rabinovich (Mellanox) Joshua S. Ladd (ORNL / Mellanox) Manjunath Gorentla Venkata (ORNL) Mike Dubman (Mellanox) Noam Bloch (Mellanox) Pavel (Pasha) Shamis (ORNL / Mellanox) Richard Graham (ORNL / Mellanox) Vasily Filipov (Mellanox) This commit was SVN r27078.
2012-08-16 23:11:35 +04:00
/* All done */
return OMPI_SUCCESS;
}
OBJ_CLASS_INSTANCE(mca_coll_ml_module_t,
mca_coll_base_module_t,
mca_coll_ml_module_construct,
mca_coll_ml_module_destruct);
OBJ_CLASS_INSTANCE(mca_coll_ml_collective_operation_progress_t,
coll/ml: add support for blocking and non-blocking allreduce, reduce, and allgather. The new collectives provide a signifigant performance increase over tuned for small and medium messages. We are initially setting the priority lower than tuned until this has had some time to soak in the trunk. Please set coll_ml_priority to 90 for MTT runs. Credit for this work goes to Manjunath Gorentla Venkata (ORNL), Pavel Shamis (ORNL), and Nathan Hjelm (LANL). Commit details (for reference): Import ORNL's collectives for MPI_Allreduce, MPI_Reduce, and MPI_Allgather. We need to take the basesmuma header into account when calculating the ptpcoll small message thresholds. Add a define to bcol.h indicating the maximum header size so we can take the header into account while not making ptpcoll dependent on information from basesmuma. This resolves an issue with allreduce where ptpcoll overwrites the header of the next buffer in the basesmuma bank. Fix reduce and make a sequential collective launcher in coll_ml_inlines.h The root calculation for reduce was wrong for any root != 0. There are four possibilities for the root: - The root is not the current process but is in the current hierarchy. In this case the root is the index of the global root as specified in the root vector. - The root is not the current process and is not in the next level of the hierarchy. In this case 0 must be the local root since this process will never communicate with the real root. - The root is not the current process but will be in next level of the hierarchy. In this case the current process must be the root. - I am the root. The root is my index. Tested with IMB which rotates the root on every call to MPI_Reduce. Consider IMB the reproducer for the issue this commit solves. Make the bcast algorithm decision an enumerated variable Resolve various asset failures when destructing coll ml requests. Two issues: - Always reset the request to be invalid before returning it to the free list. This will avoid an asset in ompi_request_t's destructor. OMPI_REQUEST_FINI does this (and also releases the fortran handle index). - Never explicitly construct or destruct the superclass of an opal object. This screws up the class function tables and will cause either an assert failure or a segmentation fault when destructing coll ml requests. Cleanup allgather. I removed the duplicate non-blocking and blocking functions and modeled the cleanup after what I found in allreduce. Also cleaned up the code somewhat. Don't bother copying from the send to the recieve buffer in bcol_basesmuma_allreduce_intra_fanin_fanout if the pointers are the same. The eliminates a warning about memcpy and aliasing and avoids an unnecessary call to memcpy. Alwasy call CHECK_AND_RELEASE on memsync collectives. There was a call to OBJ_RELEASE on the collective communicator but because CHECK_AND_RECYLCE was never called there was not matching call to OBJ_RELEASE. This caused coll ml to leak communicators. Make allreduce use the sequential collective launcher in coll_ml_inlines.h Just launch the next collective in the component progress. I am a little unsure about this patch. There appears to be some sort of race between collectives that causes buffer exhaustion in some cases (IMB Allreduce is a reproducer). Changing progress to only launch the next bcol seems to resolve the issue but might not be the best fix. Note that I see little-no performance penalty for this change. Fix allreduce when there are extra sources. There was an issue with the buffer offset calculation when there are extra sources. In the case of extra sources == 1 the offset was set to buffer_size (just past the header of the next buffer). I adjusted the buffer size to take into accoun the maximum header size (see the earlier commit that added this) and simplified the offset calculation. Make reduce/allreduce non-blocking. This is required for MPI_Comm_idup to work correctly. This has been tested with various layouts using the ibm testsuite and imb and appears to have the same performance as the old blocking version. Fix allgather for non-contiguous layouts and simplify parsing the topology. Some things in this patch: - There were several comments to the effect that level 0 of the hierarchy MUST contain all of the ranks. At least one function made this assumption but it was not true. I changed the sbgp components and the coll ml initization code to enforce this requirement. - Ensure that hierarchy level 0 has the ranks in the correct scatter gather order. This removes the need for a separate sort list and fixes the offset calculation for allgather. - There were several passes over the hierarchy to determine properties of the hierarchy. I eliminated these extra passes and the memory allocation associated with them and calculate the tree properties on the fly. The same DFS recursion also handles the re-order of level 0. All these changes have been verified with MPI_Allreduce, MPI_Reduce, and MPI_Allgather. All functions now pass all IBM/Open MPI, and IMB tests. coll/ml: correct pointer usage for MPI_BOTTOM Since contiguous datatypes are copied via memcpy (bypassing the convertor) we need to adjust for the lb of the datatype. This corrects problems found testing code that uses MPI_BOTTOM (NULL) as the send pointer. Add fallback collectives for allreduce and reduce. cmr=v1.7.5:reviewer=pasha This commit was SVN r30363.
2014-01-22 19:39:19 +04:00
ompi_request_t,
mca_coll_ml_collective_operation_progress_construct,
mca_coll_ml_collective_operation_progress_destruct);
Копировать постоянную ссылку