ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
1bc5da0911
openmpi/orte/mca/ess/alps/ess_alps_module.c

383 строки
11 KiB
C
Исходник Обычный вид История

Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
Add a resilience to ORTE. Allows the runtime to continue after a process (or ORTED) failure. Note that more work will be necessary to allow the MPI layer to take advantage of this. Per RFC: http://www.open-mpi.org/community/lists/devel/2011/06/9299.php This commit was SVN r24815.
2011-06-24 00:38:02 +04:00
* Copyright (c) 2004-2011 The University of Tennessee and The University
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*
*/
#include "orte_config.h"
#include "orte/constants.h"
- Allow to work without xt-catamount module on Jaguar, reducing the amount of components, that up to now needed to be deselected. This commit was SVN r22205.
2009-11-09 17:26:24 +03:00
#if defined(HAVE_CNOS_MPI_OS_H)
# include "cnos_mpi_os.h"
#elif defined(HAVE_CATAMOUNT_CNOS_MPI_OS_H)
# include "catamount/cnos_mpi_os.h"
#endif
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
#include "orte/util/show_help.h"
Per the RFC, extend the current use of the ompi_proc_t flags field (without changing the field itself). The prior ompi_proc_t structure had a uint8_t flag field in it, where only one bit was used to flag that a proc was "local". In that context, "local" was constrained to mean "local to this node". This commit provides a greater degree of granularity on the term "local", to include tests to see if the proc is on the same socket, PC board, node, switch, CU (computing unit), and cluster. Add #define's to designate which bits stand for which local condition. This was added to the OPAL layer to avoid conflicting with the proposed movement of the BTLs. To make it easier to use, a set of macros have been defined - e.g., OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in the code base to clearly indicate which sense of locality is being considered. All locations in the code base that looked at the current proc_t field have been changed to use the new macros. Also modify the orte_ess modules so that each returns a uint8_t (to match the ompi_proc_t field) that contains a complete description of the locality of this proc. Obviously, not all environments will be capable of providing such detailed info. Thus, getting a "false" from a test for "on_local_socket" may simply indicate a lack of knowledge. This commit was SVN r20496.
2009-02-10 05:20:16 +03:00
#include "opal/mca/paffinity/paffinity.h"
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
#include "opal/util/argv.h"
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
#include "orte/util/proc_info.h"
#include "orte/mca/errmgr/base/base.h"
#include "orte/util/name_fns.h"
Build requires prototypes, defined by "orte/util/nidmap.h". This commit was SVN r19887.
2008-11-03 19:23:42 +03:00
#include "orte/util/nidmap.h"
Extend regex support to a bigger audience This commit was SVN r25046.
2011-08-13 01:02:48 +04:00
#include "orte/util/regex.h"
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
#include "orte/runtime/orte_globals.h"
#include "orte/mca/ess/ess.h"
#include "orte/mca/ess/base/base.h"
#include "orte/mca/ess/alps/ess_alps.h"
static int alps_set_name(void);
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
static int rte_init(void);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
static int rte_finalize(void);
Per the RFC, extend the current use of the ompi_proc_t flags field (without changing the field itself). The prior ompi_proc_t structure had a uint8_t flag field in it, where only one bit was used to flag that a proc was "local". In that context, "local" was constrained to mean "local to this node". This commit provides a greater degree of granularity on the term "local", to include tests to see if the proc is on the same socket, PC board, node, switch, CU (computing unit), and cluster. Add #define's to designate which bits stand for which local condition. This was added to the OPAL layer to avoid conflicting with the proposed movement of the BTLs. To make it easier to use, a set of macros have been defined - e.g., OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in the code base to clearly indicate which sense of locality is being considered. All locations in the code base that looked at the current proc_t field have been changed to use the new macros. Also modify the orte_ess modules so that each returns a uint8_t (to match the ompi_proc_t field) that contains a complete description of the locality of this proc. Obviously, not all environments will be capable of providing such detailed info. Thus, getting a "false" from a test for "on_local_socket" may simply indicate a lack of knowledge. This commit was SVN r20496.
2009-02-10 05:20:16 +03:00
static uint8_t proc_get_locality(orte_process_name_t *proc);
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
static orte_vpid_t proc_get_daemon(orte_process_name_t *proc);
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
static char* proc_get_hostname(orte_process_name_t *proc);
MOdify the node_rank and local_rank fields to be uint16_t so we can handle more than 256 procs/node. Change the type to a defined one so that any future change can be easily done, if required. This commit was SVN r19637.
2008-09-25 17:39:08 +04:00
static orte_local_rank_t proc_get_local_rank(orte_process_name_t *proc);
static orte_node_rank_t proc_get_node_rank(orte_process_name_t *proc);
To support comm_spawn in fully routed environments, daemons need to know the route to all procs in their job family. They already had this information, but were not retaining it. The infrastructure to do so has existed for some time - just never had the time to complete it. This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message. This commit was SVN r20022.
2008-11-18 18:35:50 +03:00
static int update_pidmap(opal_byte_object_t *bo);
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
static int update_nidmap(opal_byte_object_t *bo);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
orte_ess_base_module_t orte_ess_alps_module = {
rte_init,
rte_finalize,
This commit fixes the checkpoint/restart functionality on the trunk. Included in this commit are: * Extension to the ESS framework to support C/R * Fixed support for {{{snapc_base_establish_global_snapshot_dir}}} * Fixed FileM support * Misc. minor code modifications There are some outstanding visability issues that I want to fix next. This commit was SVN r17725.
2008-03-05 07:57:23 +03:00
orte_ess_base_app_abort,
Per the RFC, extend the current use of the ompi_proc_t flags field (without changing the field itself). The prior ompi_proc_t structure had a uint8_t flag field in it, where only one bit was used to flag that a proc was "local". In that context, "local" was constrained to mean "local to this node". This commit provides a greater degree of granularity on the term "local", to include tests to see if the proc is on the same socket, PC board, node, switch, CU (computing unit), and cluster. Add #define's to designate which bits stand for which local condition. This was added to the OPAL layer to avoid conflicting with the proposed movement of the BTLs. To make it easier to use, a set of macros have been defined - e.g., OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in the code base to clearly indicate which sense of locality is being considered. All locations in the code base that looked at the current proc_t field have been changed to use the new macros. Also modify the orte_ess modules so that each returns a uint8_t (to match the ompi_proc_t field) that contains a complete description of the locality of this proc. Obviously, not all environments will be capable of providing such detailed info. Thus, getting a "false" from a test for "on_local_socket" may simply indicate a lack of knowledge. This commit was SVN r20496.
2009-02-10 05:20:16 +03:00
proc_get_locality,
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
proc_get_daemon,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
proc_get_hostname,
proc_get_local_rank,
proc_get_node_rank,
Add a resilience to ORTE. Allows the runtime to continue after a process (or ORTED) failure. Note that more work will be necessary to allow the MPI layer to take advantage of this. Per RFC: http://www.open-mpi.org/community/lists/devel/2011/06/9299.php This commit was SVN r24815.
2011-06-24 00:38:02 +04:00
orte_ess_base_proc_get_epoch,
To support comm_spawn in fully routed environments, daemons need to know the route to all procs in their job family. They already had this information, but were not retaining it. The infrastructure to do so has existed for some time - just never had the time to complete it. This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message. This commit was SVN r20022.
2008-11-18 18:35:50 +03:00
update_pidmap,
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
update_nidmap,
This commit fixes the checkpoint/restart functionality on the trunk. Included in this commit are: * Extension to the ESS framework to support C/R * Fixed support for {{{snapc_base_establish_global_snapshot_dir}}} * Fixed FileM support * Misc. minor code modifications There are some outstanding visability issues that I want to fix next. This commit was SVN r17725.
2008-03-05 07:57:23 +03:00
NULL /* ft_event */
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
};
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
/*
* Local variables
*/
static orte_node_rank_t my_node_rank=ORTE_NODE_RANK_INVALID;
Bring alps back to full operations by correctly computing daemon names. Unfortunately, alps doesn't assign cnos rank in node-based order - i.e., cnos rank=0 isn't necessarily on the first node of the execution. So adjust when using static ports. Add some debug to nidmap Ensure that the HNP's node name is not included in the regex when launching via rshbase as that node is automatically included in the daemon map. This commit was SVN r25063.
2011-08-18 18:59:18 +04:00
static orte_vpid_t starting_vpid=0;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
static int rte_init(void)
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
{
Bring alps back to full operations by correctly computing daemon names. Unfortunately, alps doesn't assign cnos rank in node-based order - i.e., cnos rank=0 isn't necessarily on the first node of the execution. So adjust when using static ports. Add some debug to nidmap Ensure that the HNP's node name is not included in the regex when launching via rshbase as that node is automatically included in the daemon map. This commit was SVN r25063.
2011-08-18 18:59:18 +04:00
int ret, i;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
char *error = NULL;
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
char **hosts = NULL;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Complete implementation of the --without-rte-support configure option. Working with Brian, this has been tested on RedStorm. Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed. This commit was SVN r18664.
2008-06-18 07:15:56 +04:00
/* run the prolog */
if (ORTE_SUCCESS != (ret = orte_ess_base_std_prolog())) {
error = "orte_ess_base_std_prolog";
goto error;
}
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* Start by getting a unique name */
alps_set_name();
/* if I am a daemon, complete my setup using the
* default procedure
*/
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
if (ORTE_PROC_IS_DAEMON) {
Extend regex support to a bigger audience This commit was SVN r25046.
2011-08-13 01:02:48 +04:00
if (NULL != orte_node_regex) {
/* extract the nodes */
Bring alps back to full operations by correctly computing daemon names. Unfortunately, alps doesn't assign cnos rank in node-based order - i.e., cnos rank=0 isn't necessarily on the first node of the execution. So adjust when using static ports. Add some debug to nidmap Ensure that the HNP's node name is not included in the regex when launching via rshbase as that node is automatically included in the daemon map. This commit was SVN r25063.
2011-08-18 18:59:18 +04:00
if (ORTE_SUCCESS != (ret = orte_regex_extract_node_names(orte_node_regex, &hosts)) ||
NULL == hosts) {
Extend regex support to a bigger audience This commit was SVN r25046.
2011-08-13 01:02:48 +04:00
error = "orte_regex_extract_node_names";
goto error;
}
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
}
Bring alps back to full operations by correctly computing daemon names. Unfortunately, alps doesn't assign cnos rank in node-based order - i.e., cnos rank=0 isn't necessarily on the first node of the execution. So adjust when using static ports. Add some debug to nidmap Ensure that the HNP's node name is not included in the regex when launching via rshbase as that node is automatically included in the daemon map. This commit was SVN r25063.
2011-08-18 18:59:18 +04:00
/* find our host in the list */
for (i=0; NULL != hosts[i]; i++) {
if (0 == strncmp(hosts[i], orte_process_info.nodename, strlen(hosts[i]))) {
/* correct our vpid */
ORTE_PROC_MY_NAME->vpid = starting_vpid + i;
OPAL_OUTPUT_VERBOSE((1, orte_ess_base_output,
"ess:alps reset name to %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME)));
break;
}
}
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
if (ORTE_SUCCESS != (ret = orte_ess_base_orted_setup(hosts))) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
ORTE_ERROR_LOG(ret);
error = "orte_ess_base_orted_setup";
goto error;
}
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
opal_argv_free(hosts);
return ORTE_SUCCESS;
}
if (ORTE_PROC_IS_TOOL) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* otherwise, if I am a tool proc, use that procedure */
if (ORTE_SUCCESS != (ret = orte_ess_base_tool_setup())) {
ORTE_ERROR_LOG(ret);
error = "orte_ess_base_tool_setup";
goto error;
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
/* as a tool, I don't need a nidmap - so just return now */
return ORTE_SUCCESS;
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
}
/* otherwise, I must be an application process - use
* the default procedure to finish my setup
*/
if (ORTE_SUCCESS != (ret = orte_ess_base_app_setup())) {
ORTE_ERROR_LOG(ret);
error = "orte_ess_base_app_setup";
goto error;
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
}
/* setup the nidmap arrays */
- Revert r20739 This commit was SVN r20742. The following SVN revision numbers were found above: r20739 --> open-mpi/ompi@781caee0b670ea169baead8facc23390112f094f
2009-03-06 00:56:03 +03:00
if (ORTE_SUCCESS != (ret = orte_util_nidmap_init(orte_process_info.sync_buf))) {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
ORTE_ERROR_LOG(ret);
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
error = "orte_util_nidmap_init";
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
goto error;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
}
return ORTE_SUCCESS;
error:
This commit represents a bunch of work on a Mercurial side branch. As such, the commit message back to the master SVN repository is fairly long. = ORTE Job-Level Output Messages = Add two new interfaces that should be used for all new code throughout the ORTE and OMPI layers (we already make the search-and-replace on the existing ORTE / OMPI layers): * orte_output(): (and corresponding friends ORTE_OUTPUT, orte_output_verbose, etc.) This function sends the output directly to the HNP for processing as part of a job-specific output channel. It supports all the same outputs as opal_output() (syslog, file, stdout, stderr), but for stdout/stderr, the output is sent to the HNP for processing and output. More on this below. * orte_show_help(): This function is a drop-in-replacement for opal_show_help(), with two differences in functionality: 1. the rendered text help message output is sent to the HNP for display (rather than outputting directly into the process' stderr stream) 1. the HNP detects duplicate help messages and does not display them (so that you don't see the same error message N times, once from each of your N MPI processes); instead, it counts "new" instances of the help message and displays a message every ~5 seconds when there are new ones ("I got X new copies of the help message...") opal_show_help and opal_output still exist, but they only output in the current process. The intent for the new orte_* functions is that they can apply job-level intelligence to the output. As such, we recommend that all new ORTE and OMPI code use the new orte_* functions, not thei opal_* functions. === New code === For ORTE and OMPI programmers, here's what you need to do differently in new code: * Do not include opal/util/show_help.h or opal/util/output.h. Instead, include orte/util/output.h (this one header file has declarations for both the orte_output() series of functions and orte_show_help()). * Effectively s/opal_output/orte_output/gi throughout your code. Note that orte_output_open() takes a slightly different argument list (as a way to pass data to the filtering stream -- see below), so you if explicitly call opal_output_open(), you'll need to slightly adapt to the new signature of orte_output_open(). * Literally s/opal_show_help/orte_show_help/. The function signature is identical. === Notes === * orte_output'ing to stream 0 will do similar to what opal_output'ing did, so leaving a hard-coded "0" as the first argument is safe. * For systems that do not use ORTE's RML or the HNP, the effect of orte_output_* and orte_show_help will be identical to their opal counterparts (the additional information passed to orte_output_open() will be lost!). Indeed, the orte_* functions simply become trivial wrappers to their opal_* counterparts. Note that we have not tested this; the code is simple but it is quite possible that we mucked something up. = Filter Framework = Messages sent view the new orte_* functions described above and messages output via the IOF on the HNP will now optionally be passed through a new "filter" framework before being output to stdout/stderr. The "filter" OPAL MCA framework is intended to allow preprocessing to messages before they are sent to their final destinations. The first component that was written in the filter framework was to create an XML stream, segregating all the messages into different XML tags, etc. This will allow 3rd party tools to read the stdout/stderr from the HNP and be able to know exactly what each text message is (e.g., a help message, another OMPI infrastructure message, stdout from the user process, stderr from the user process, etc.). Filtering is not active by default. Filter components must be specifically requested, such as: {{{ $ mpirun --mca filter xml ... }}} There can only be one filter component active. = New MCA Parameters = The new functionality described above introduces two new MCA parameters: * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that help messages will be aggregated, as described above. If set to 0, all help messages will be displayed, even if they are duplicates (i.e., the original behavior). * '''orte_base_show_output_recursions''': An MCA parameter to help debug one of the known issues, described below. It is likely that this MCA parameter will disappear before v1.3 final. = Known Issues = * The XML filter component is not complete. The current output from this component is preliminary and not real XML. A bit more work needs to be done to configure.m4 search for an appropriate XML library/link it in/use it at run time. * There are possible recursion loops in the orte_output() and orte_show_help() functions -- e.g., if RML send calls orte_output() or orte_show_help(). We have some ideas how to fix these, but figured that it was ok to commit before feature freeze with known issues. The code currently contains sub-optimal workarounds so that this will not be a problem, but it would be good to actually solve the problem rather than have hackish workarounds before v1.3 final. This commit was SVN r18434.
2008-05-14 00:00:55 +04:00
orte_show_help("help-orte-runtime.txt",
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
"orte_init:startup:internal-failure",
true, error, ORTE_ERROR_NAME(ret), ret);
return ret;
}
static int rte_finalize(void)
{
int ret;
/* if I am a daemon, finalize using the default procedure */
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
if (ORTE_PROC_IS_DAEMON) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
if (ORTE_SUCCESS != (ret = orte_ess_base_orted_finalize())) {
ORTE_ERROR_LOG(ret);
}
Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans. Minor mod to the ompi layer to use the new #define's - just one-line name replacements. This commit was SVN r21144.
2009-05-04 15:07:40 +04:00
} else if (ORTE_PROC_IS_TOOL) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* otherwise, if I am a tool proc, use that procedure */
if (ORTE_SUCCESS != (ret = orte_ess_base_tool_finalize())) {
ORTE_ERROR_LOG(ret);
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
/* as a tool, I didn't create a nidmap - so just return now */
return ret;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
} else {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
/* otherwise, I must be an application process
* use the default procedure to finish
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
*/
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
if (ORTE_SUCCESS != (ret = orte_ess_base_app_finalize())) {
ORTE_ERROR_LOG(ret);
}
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
/* deconstruct my nidmap and jobmap arrays */
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
orte_util_nidmap_finalize();
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
return ret;
}
Per the RFC, extend the current use of the ompi_proc_t flags field (without changing the field itself). The prior ompi_proc_t structure had a uint8_t flag field in it, where only one bit was used to flag that a proc was "local". In that context, "local" was constrained to mean "local to this node". This commit provides a greater degree of granularity on the term "local", to include tests to see if the proc is on the same socket, PC board, node, switch, CU (computing unit), and cluster. Add #define's to designate which bits stand for which local condition. This was added to the OPAL layer to avoid conflicting with the proposed movement of the BTLs. To make it easier to use, a set of macros have been defined - e.g., OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in the code base to clearly indicate which sense of locality is being considered. All locations in the code base that looked at the current proc_t field have been changed to use the new macros. Also modify the orte_ess modules so that each returns a uint8_t (to match the ompi_proc_t field) that contains a complete description of the locality of this proc. Obviously, not all environments will be capable of providing such detailed info. Thus, getting a "false" from a test for "on_local_socket" may simply indicate a lack of knowledge. This commit was SVN r20496.
2009-02-10 05:20:16 +03:00
static uint8_t proc_get_locality(orte_process_name_t *proc)
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_nid_t *nid;
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (nid = orte_util_lookup_nid(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
Per the RFC, extend the current use of the ompi_proc_t flags field (without changing the field itself). The prior ompi_proc_t structure had a uint8_t flag field in it, where only one bit was used to flag that a proc was "local". In that context, "local" was constrained to mean "local to this node". This commit provides a greater degree of granularity on the term "local", to include tests to see if the proc is on the same socket, PC board, node, switch, CU (computing unit), and cluster. Add #define's to designate which bits stand for which local condition. This was added to the OPAL layer to avoid conflicting with the proposed movement of the BTLs. To make it easier to use, a set of macros have been defined - e.g., OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in the code base to clearly indicate which sense of locality is being considered. All locations in the code base that looked at the current proc_t field have been changed to use the new macros. Also modify the orte_ess modules so that each returns a uint8_t (to match the ompi_proc_t field) that contains a complete description of the locality of this proc. Obviously, not all environments will be capable of providing such detailed info. Thus, getting a "false" from a test for "on_local_socket" may simply indicate a lack of knowledge. This commit was SVN r20496.
2009-02-10 05:20:16 +03:00
return OPAL_PROC_NON_LOCAL;
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
}
if (nid->daemon == ORTE_PROC_MY_DAEMON->vpid) {
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Per the RFC, extend the current use of the ompi_proc_t flags field (without changing the field itself). The prior ompi_proc_t structure had a uint8_t flag field in it, where only one bit was used to flag that a proc was "local". In that context, "local" was constrained to mean "local to this node". This commit provides a greater degree of granularity on the term "local", to include tests to see if the proc is on the same socket, PC board, node, switch, CU (computing unit), and cluster. Add #define's to designate which bits stand for which local condition. This was added to the OPAL layer to avoid conflicting with the proposed movement of the BTLs. To make it easier to use, a set of macros have been defined - e.g., OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in the code base to clearly indicate which sense of locality is being considered. All locations in the code base that looked at the current proc_t field have been changed to use the new macros. Also modify the orte_ess modules so that each returns a uint8_t (to match the ompi_proc_t field) that contains a complete description of the locality of this proc. Obviously, not all environments will be capable of providing such detailed info. Thus, getting a "false" from a test for "on_local_socket" may simply indicate a lack of knowledge. This commit was SVN r20496.
2009-02-10 05:20:16 +03:00
"%s ess:alps: proc %s on LOCAL NODE",
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc)));
Per the RFC, extend the current use of the ompi_proc_t flags field (without changing the field itself). The prior ompi_proc_t structure had a uint8_t flag field in it, where only one bit was used to flag that a proc was "local". In that context, "local" was constrained to mean "local to this node". This commit provides a greater degree of granularity on the term "local", to include tests to see if the proc is on the same socket, PC board, node, switch, CU (computing unit), and cluster. Add #define's to designate which bits stand for which local condition. This was added to the OPAL layer to avoid conflicting with the proposed movement of the BTLs. To make it easier to use, a set of macros have been defined - e.g., OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in the code base to clearly indicate which sense of locality is being considered. All locations in the code base that looked at the current proc_t field have been changed to use the new macros. Also modify the orte_ess modules so that each returns a uint8_t (to match the ompi_proc_t field) that contains a complete description of the locality of this proc. Obviously, not all environments will be capable of providing such detailed info. Thus, getting a "false" from a test for "on_local_socket" may simply indicate a lack of knowledge. This commit was SVN r20496.
2009-02-10 05:20:16 +03:00
return (OPAL_PROC_ON_NODE | OPAL_PROC_ON_CU | OPAL_PROC_ON_CLUSTER);
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s is REMOTE",
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc)));
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Per the RFC, extend the current use of the ompi_proc_t flags field (without changing the field itself). The prior ompi_proc_t structure had a uint8_t flag field in it, where only one bit was used to flag that a proc was "local". In that context, "local" was constrained to mean "local to this node". This commit provides a greater degree of granularity on the term "local", to include tests to see if the proc is on the same socket, PC board, node, switch, CU (computing unit), and cluster. Add #define's to designate which bits stand for which local condition. This was added to the OPAL layer to avoid conflicting with the proposed movement of the BTLs. To make it easier to use, a set of macros have been defined - e.g., OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in the code base to clearly indicate which sense of locality is being considered. All locations in the code base that looked at the current proc_t field have been changed to use the new macros. Also modify the orte_ess modules so that each returns a uint8_t (to match the ompi_proc_t field) that contains a complete description of the locality of this proc. Obviously, not all environments will be capable of providing such detailed info. Thus, getting a "false" from a test for "on_local_socket" may simply indicate a lack of knowledge. This commit was SVN r20496.
2009-02-10 05:20:16 +03:00
return OPAL_PROC_NON_LOCAL;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
static orte_vpid_t proc_get_daemon(orte_process_name_t *proc)
{
orte_nid_t *nid;
We know what a daemon is there is no need to dig into the nidmap to find it out. This commit was SVN r21503.
2009-06-24 00:43:45 +04:00
if( ORTE_JOBID_IS_DAEMON(proc->jobid) ) {
return proc->vpid;
}
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (nid = orte_util_lookup_nid(proc))) {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
return ORTE_VPID_INVALID;
}
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
"%s ess:alps: proc %s is hosted by daemon %s",
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
ORTE_VPID_PRINT(nid->daemon)));
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
return nid->daemon;
}
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
static char* proc_get_hostname(orte_process_name_t *proc)
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_nid_t *nid;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (nid = orte_util_lookup_nid(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return NULL;
Allow the ESS to return the hostname and arch for a specified daemon instead of just for application procs. Uses the same API - just need to detect that the specified proc is a daemon and lookup its corresponding node in the nidmap. This commit was SVN r18722.
2008-06-24 21:53:10 +04:00
}
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s is on host %s",
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
nid->name));
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
return nid->name;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
MOdify the node_rank and local_rank fields to be uint16_t so we can handle more than 256 procs/node. Change the type to a defined one so that any future change can be easily done, if required. This commit was SVN r19637.
2008-09-25 17:39:08 +04:00
static orte_local_rank_t proc_get_local_rank(orte_process_name_t *proc)
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_pmap_t *pmap;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (pmap = orte_util_lookup_pmap(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
Catch a potential bug spanning several ESS modules. The node_rank and local_rank types were changed to uint16_t, however the modules returned UINT8_MAX as an "invalid" value. To clean this up, define an INVALID value for these types, and change the various modules so they return this value to indicate an invalid response. This commit was SVN r20303.
2009-01-21 03:19:37 +03:00
return ORTE_LOCAL_RANK_INVALID;
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
}
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s has local rank %d",
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
(int)pmap->local_rank));
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
return pmap->local_rank;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
MOdify the node_rank and local_rank fields to be uint16_t so we can handle more than 256 procs/node. Change the type to a defined one so that any future change can be easily done, if required. This commit was SVN r19637.
2008-09-25 17:39:08 +04:00
static orte_node_rank_t proc_get_node_rank(orte_process_name_t *proc)
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_pmap_t *pmap;
Add a resilience to ORTE. Allows the runtime to continue after a process (or ORTED) failure. Note that more work will be necessary to allow the MPI layer to take advantage of this. Per RFC: http://www.open-mpi.org/community/lists/devel/2011/06/9299.php This commit was SVN r24815.
2011-06-24 00:38:02 +04:00
orte_ns_cmp_bitmask_t mask;
mask = ORTE_NS_CMP_ALL;
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
/* is this me? */
Add a resilience to ORTE. Allows the runtime to continue after a process (or ORTED) failure. Note that more work will be necessary to allow the MPI layer to take advantage of this. Per RFC: http://www.open-mpi.org/community/lists/devel/2011/06/9299.php This commit was SVN r24815.
2011-06-24 00:38:02 +04:00
if (OPAL_EQUAL == orte_util_compare_name_fields(mask, proc, ORTE_PROC_MY_NAME)) {
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
/* yes it is - reply with my rank. This is necessary
* because the pidmap will not have arrived when I
* am starting up, and if we use static ports, then
* I need to know my node rank during init
*/
return my_node_rank;
}
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (pmap = orte_util_lookup_pmap(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
Catch a potential bug spanning several ESS modules. The node_rank and local_rank types were changed to uint16_t, however the modules returned UINT8_MAX as an "invalid" value. To clean this up, define an INVALID value for these types, and change the various modules so they return this value to indicate an invalid response. This commit was SVN r20303.
2009-01-21 03:19:37 +03:00
return ORTE_NODE_RANK_INVALID;
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
}
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s has node rank %d",
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
(int)pmap->node_rank));
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
return pmap->node_rank;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
To support comm_spawn in fully routed environments, daemons need to know the route to all procs in their job family. They already had this information, but were not retaining it. The infrastructure to do so has existed for some time - just never had the time to complete it. This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message. This commit was SVN r20022.
2008-11-18 18:35:50 +03:00
static int update_pidmap(opal_byte_object_t *bo)
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
{
int ret;
/* build the pmap */
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (ORTE_SUCCESS != (ret = orte_util_decode_pidmap(bo))) {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
ORTE_ERROR_LOG(ret);
}
return ret;
}
static int update_nidmap(opal_byte_object_t *bo)
{
int rc;
/* decode the nidmap - the util will know what to do */
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (ORTE_SUCCESS != (rc = orte_util_decode_nodemap(bo))) {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
ORTE_ERROR_LOG(rc);
}
return rc;
}
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
static int alps_set_name(void)
{
int rc;
orte_jobid_t jobid;
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
char* tmp;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((1, orte_ess_base_output,
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
"ess:alps setting name"));
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
mca_base_param_reg_string_name("orte", "ess_jobid", "Process jobid",
true, false, NULL, &tmp);
if (NULL == tmp) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return ORTE_ERR_NOT_FOUND;
}
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
if (ORTE_SUCCESS != (rc = orte_util_convert_string_to_jobid(&jobid, tmp))) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
ORTE_ERROR_LOG(rc);
return(rc);
}
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
free(tmp);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
mca_base_param_reg_string_name("orte", "ess_vpid", "Process vpid",
true, false, NULL, &tmp);
if (NULL == tmp) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return ORTE_ERR_NOT_FOUND;
}
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
if (ORTE_SUCCESS != (rc = orte_util_convert_string_to_vpid(&starting_vpid, tmp))) {
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
ORTE_ERROR_LOG(rc);
return(rc);
}
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
free(tmp);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
ORTE_PROC_MY_NAME->jobid = jobid;
ORTE_PROC_MY_NAME->vpid = (orte_vpid_t) cnos_get_rank() + starting_vpid;
Correct a typo reported by Pasha. This commit was SVN r25109.
2011-08-30 22:44:52 +04:00
ORTE_EPOCH_SET(ORTE_PROC_MY_NAME->epoch,ORTE_EPOCH_INVALID);
ORTE_EPOCH_SET(ORTE_PROC_MY_NAME->epoch,orte_ess.proc_get_epoch(ORTE_PROC_MY_NAME));
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((1, orte_ess_base_output,
- Revert r20740 This commit was SVN r20741. The following SVN revision numbers were found above: r20740 --> open-mpi/ompi@2a70618a77d69c02354fa493c4e3235cfa45956f
2009-03-06 00:50:47 +03:00
"ess:alps set name to %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME)));
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
Bring alps back to full operations by correctly computing daemon names. Unfortunately, alps doesn't assign cnos rank in node-based order - i.e., cnos rank=0 isn't necessarily on the first node of the execution. So adjust when using static ports. Add some debug to nidmap Ensure that the HNP's node name is not included in the regex when launching via rshbase as that node is automatically included in the daemon map. This commit was SVN r25063.
2011-08-18 18:59:18 +04:00
/* get the num procs as provided in the cmd line param */
if (ORTE_SUCCESS != (rc = orte_ess_env_get())) {
ORTE_ERROR_LOG(rc);
return rc;
Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job). Add a new tm ess module that exploits this capability. Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function. Additional fixes included: 1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with! 2. fix a duplicate free when attempting to execute a non-existent app 3. cleanup an typo in the comm utilities 4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info. This commit was SVN r21248.
2009-05-16 08:15:55 +04:00
}
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
Add a resilience to ORTE. Allows the runtime to continue after a process (or ORTED) failure. Note that more work will be necessary to allow the MPI layer to take advantage of this. Per RFC: http://www.open-mpi.org/community/lists/devel/2011/06/9299.php This commit was SVN r24815.
2011-06-24 00:38:02 +04:00
if (orte_process_info.max_procs < orte_process_info.num_procs) {
orte_process_info.max_procs = orte_process_info.num_procs;
}
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
return ORTE_SUCCESS;
}
Копировать постоянную ссылку