ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
4da9f53fa4
openmpi/orte/mca/ess/alps/ess_alps_module.c

363 строки
10 KiB
C
Исходник Обычный вид История

Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*
*/
#include "orte_config.h"
#include "orte/constants.h"
#include <catamount/cnos_mpi_os.h>
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
#include "orte/util/show_help.h"
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
#include "opal/util/argv.h"
#include "opal/class/opal_pointer_array.h"
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
#include "orte/util/proc_info.h"
#include "orte/mca/errmgr/base/base.h"
#include "orte/util/name_fns.h"
Build requires prototypes, defined by "orte/util/nidmap.h". This commit was SVN r19887.
2008-11-03 19:23:42 +03:00
#include "orte/util/nidmap.h"
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
#include "orte/runtime/orte_globals.h"
#include "orte/mca/ess/ess.h"
#include "orte/mca/ess/base/base.h"
#include "orte/mca/ess/alps/ess_alps.h"
static int alps_set_name(void);
static int rte_init(char flags);
static int rte_finalize(void);
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
static bool proc_is_local(orte_process_name_t *proc);
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
static orte_vpid_t proc_get_daemon(orte_process_name_t *proc);
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
static char* proc_get_hostname(orte_process_name_t *proc);
static uint32_t proc_get_arch(orte_process_name_t *proc);
MOdify the node_rank and local_rank fields to be uint16_t so we can handle more than 256 procs/node. Change the type to a defined one so that any future change can be easily done, if required. This commit was SVN r19637.
2008-09-25 17:39:08 +04:00
static orte_local_rank_t proc_get_local_rank(orte_process_name_t *proc);
static orte_node_rank_t proc_get_node_rank(orte_process_name_t *proc);
Add a new grpcomm module that mimics the old 1.2 behavior - it -always- does a modex because it always includes the architecture. Hence, we called it "blind-and-dumb" since it doesn't look to see if this is required - moniker of "bad". :-) Update the ESS API so we can update the stored arch's should the modex include that info. Update ompi/proc to check/set the arch for remote procs, and add that function call to mpi_init right after the modex is done. Setup to allow other grpcomm modules to decide whether or not to add the arch to the modex, and to detect if other entries have been made. If not, then the modex can just fall through. Begin setting up some logic in the "basic" module to handle different arch situations. For now, default to the "bad" module so we will work in all situations, even though we may be sending around more info than we really require. This fixes ticket #1340 This commit was SVN r18673.
2008-06-19 02:17:53 +04:00
static int update_arch(orte_process_name_t *proc, uint32_t arch);
To support comm_spawn in fully routed environments, daemons need to know the route to all procs in their job family. They already had this information, but were not retaining it. The infrastructure to do so has existed for some time - just never had the time to complete it. This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message. This commit was SVN r20022.
2008-11-18 18:35:50 +03:00
static int update_pidmap(opal_byte_object_t *bo);
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
static int update_nidmap(opal_byte_object_t *bo);
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
orte_ess_base_module_t orte_ess_alps_module = {
rte_init,
rte_finalize,
This commit fixes the checkpoint/restart functionality on the trunk. Included in this commit are: * Extension to the ESS framework to support C/R * Fixed support for {{{snapc_base_establish_global_snapshot_dir}}} * Fixed FileM support * Misc. minor code modifications There are some outstanding visability issues that I want to fix next. This commit was SVN r17725.
2008-03-05 07:57:23 +03:00
orte_ess_base_app_abort,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
proc_is_local,
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
proc_get_daemon,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
proc_get_hostname,
proc_get_arch,
proc_get_local_rank,
proc_get_node_rank,
Add a new grpcomm module that mimics the old 1.2 behavior - it -always- does a modex because it always includes the architecture. Hence, we called it "blind-and-dumb" since it doesn't look to see if this is required - moniker of "bad". :-) Update the ESS API so we can update the stored arch's should the modex include that info. Update ompi/proc to check/set the arch for remote procs, and add that function call to mpi_init right after the modex is done. Setup to allow other grpcomm modules to decide whether or not to add the arch to the modex, and to detect if other entries have been made. If not, then the modex can just fall through. Begin setting up some logic in the "basic" module to handle different arch situations. For now, default to the "bad" module so we will work in all situations, even though we may be sending around more info than we really require. This fixes ticket #1340 This commit was SVN r18673.
2008-06-19 02:17:53 +04:00
update_arch,
To support comm_spawn in fully routed environments, daemons need to know the route to all procs in their job family. They already had this information, but were not retaining it. The infrastructure to do so has existed for some time - just never had the time to complete it. This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message. This commit was SVN r20022.
2008-11-18 18:35:50 +03:00
update_pidmap,
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
update_nidmap,
This commit fixes the checkpoint/restart functionality on the trunk. Included in this commit are: * Extension to the ESS framework to support C/R * Fixed support for {{{snapc_base_establish_global_snapshot_dir}}} * Fixed FileM support * Misc. minor code modifications There are some outstanding visability issues that I want to fix next. This commit was SVN r17725.
2008-03-05 07:57:23 +03:00
NULL /* ft_event */
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
};
static int rte_init(char flags)
{
int ret;
char *error = NULL;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Complete implementation of the --without-rte-support configure option. Working with Brian, this has been tested on RedStorm. Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed. This commit was SVN r18664.
2008-06-18 07:15:56 +04:00
/* run the prolog */
if (ORTE_SUCCESS != (ret = orte_ess_base_std_prolog())) {
error = "orte_ess_base_std_prolog";
goto error;
}
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
/* Start by getting a unique name */
alps_set_name();
/* if I am a daemon, complete my setup using the
* default procedure
*/
if (orte_process_info.daemon) {
if (ORTE_SUCCESS != (ret = orte_ess_base_orted_setup())) {
ORTE_ERROR_LOG(ret);
error = "orte_ess_base_orted_setup";
goto error;
}
} else if (orte_process_info.tool) {
/* otherwise, if I am a tool proc, use that procedure */
if (ORTE_SUCCESS != (ret = orte_ess_base_tool_setup())) {
ORTE_ERROR_LOG(ret);
error = "orte_ess_base_tool_setup";
goto error;
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
/* as a tool, I don't need a nidmap - so just return now */
return ORTE_SUCCESS;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
} else {
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
/* otherwise, I must be an application process - use
* the default procedure to finish my setup
*/
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
if (ORTE_SUCCESS != (ret = orte_ess_base_app_setup())) {
ORTE_ERROR_LOG(ret);
error = "orte_ess_base_app_setup";
goto error;
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
}
/* setup the nidmap arrays */
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (ORTE_SUCCESS != (ret = orte_util_nidmap_init(orte_process_info.sync_buf))) {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
ORTE_ERROR_LOG(ret);
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
error = "orte_util_nidmap_init";
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
goto error;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
}
return ORTE_SUCCESS;
error:
This commit represents a bunch of work on a Mercurial side branch. As such, the commit message back to the master SVN repository is fairly long. = ORTE Job-Level Output Messages = Add two new interfaces that should be used for all new code throughout the ORTE and OMPI layers (we already make the search-and-replace on the existing ORTE / OMPI layers): * orte_output(): (and corresponding friends ORTE_OUTPUT, orte_output_verbose, etc.) This function sends the output directly to the HNP for processing as part of a job-specific output channel. It supports all the same outputs as opal_output() (syslog, file, stdout, stderr), but for stdout/stderr, the output is sent to the HNP for processing and output. More on this below. * orte_show_help(): This function is a drop-in-replacement for opal_show_help(), with two differences in functionality: 1. the rendered text help message output is sent to the HNP for display (rather than outputting directly into the process' stderr stream) 1. the HNP detects duplicate help messages and does not display them (so that you don't see the same error message N times, once from each of your N MPI processes); instead, it counts "new" instances of the help message and displays a message every ~5 seconds when there are new ones ("I got X new copies of the help message...") opal_show_help and opal_output still exist, but they only output in the current process. The intent for the new orte_* functions is that they can apply job-level intelligence to the output. As such, we recommend that all new ORTE and OMPI code use the new orte_* functions, not thei opal_* functions. === New code === For ORTE and OMPI programmers, here's what you need to do differently in new code: * Do not include opal/util/show_help.h or opal/util/output.h. Instead, include orte/util/output.h (this one header file has declarations for both the orte_output() series of functions and orte_show_help()). * Effectively s/opal_output/orte_output/gi throughout your code. Note that orte_output_open() takes a slightly different argument list (as a way to pass data to the filtering stream -- see below), so you if explicitly call opal_output_open(), you'll need to slightly adapt to the new signature of orte_output_open(). * Literally s/opal_show_help/orte_show_help/. The function signature is identical. === Notes === * orte_output'ing to stream 0 will do similar to what opal_output'ing did, so leaving a hard-coded "0" as the first argument is safe. * For systems that do not use ORTE's RML or the HNP, the effect of orte_output_* and orte_show_help will be identical to their opal counterparts (the additional information passed to orte_output_open() will be lost!). Indeed, the orte_* functions simply become trivial wrappers to their opal_* counterparts. Note that we have not tested this; the code is simple but it is quite possible that we mucked something up. = Filter Framework = Messages sent view the new orte_* functions described above and messages output via the IOF on the HNP will now optionally be passed through a new "filter" framework before being output to stdout/stderr. The "filter" OPAL MCA framework is intended to allow preprocessing to messages before they are sent to their final destinations. The first component that was written in the filter framework was to create an XML stream, segregating all the messages into different XML tags, etc. This will allow 3rd party tools to read the stdout/stderr from the HNP and be able to know exactly what each text message is (e.g., a help message, another OMPI infrastructure message, stdout from the user process, stderr from the user process, etc.). Filtering is not active by default. Filter components must be specifically requested, such as: {{{ $ mpirun --mca filter xml ... }}} There can only be one filter component active. = New MCA Parameters = The new functionality described above introduces two new MCA parameters: * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that help messages will be aggregated, as described above. If set to 0, all help messages will be displayed, even if they are duplicates (i.e., the original behavior). * '''orte_base_show_output_recursions''': An MCA parameter to help debug one of the known issues, described below. It is likely that this MCA parameter will disappear before v1.3 final. = Known Issues = * The XML filter component is not complete. The current output from this component is preliminary and not real XML. A bit more work needs to be done to configure.m4 search for an appropriate XML library/link it in/use it at run time. * There are possible recursion loops in the orte_output() and orte_show_help() functions -- e.g., if RML send calls orte_output() or orte_show_help(). We have some ideas how to fix these, but figured that it was ok to commit before feature freeze with known issues. The code currently contains sub-optimal workarounds so that this will not be a problem, but it would be good to actually solve the problem rather than have hackish workarounds before v1.3 final. This commit was SVN r18434.
2008-05-14 00:00:55 +04:00
orte_show_help("help-orte-runtime.txt",
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
"orte_init:startup:internal-failure",
true, error, ORTE_ERROR_NAME(ret), ret);
return ret;
}
static int rte_finalize(void)
{
int ret;
/* if I am a daemon, finalize using the default procedure */
if (orte_process_info.daemon) {
if (ORTE_SUCCESS != (ret = orte_ess_base_orted_finalize())) {
ORTE_ERROR_LOG(ret);
}
} else if (orte_process_info.tool) {
/* otherwise, if I am a tool proc, use that procedure */
if (ORTE_SUCCESS != (ret = orte_ess_base_tool_finalize())) {
ORTE_ERROR_LOG(ret);
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
/* as a tool, I didn't create a nidmap - so just return now */
return ret;
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
} else {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
/* otherwise, I must be an application process
* use the default procedure to finish
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
*/
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
if (ORTE_SUCCESS != (ret = orte_ess_base_app_finalize())) {
ORTE_ERROR_LOG(ret);
}
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
/* deconstruct my nidmap and jobmap arrays */
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
orte_util_nidmap_finalize();
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
return ret;
}
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
static bool proc_is_local(orte_process_name_t *proc)
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_nid_t *nid;
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (nid = orte_util_lookup_nid(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return false;
}
if (nid->daemon == ORTE_PROC_MY_DAEMON->vpid) {
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s is LOCAL",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc)));
return true;
}
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s is REMOTE",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc)));
return false;
}
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
static orte_vpid_t proc_get_daemon(orte_process_name_t *proc)
{
orte_nid_t *nid;
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (nid = orte_util_lookup_nid(proc))) {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
return ORTE_VPID_INVALID;
}
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
"%s ess:alps: proc %s is hosted by daemon %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
ORTE_VPID_PRINT(nid->daemon)));
return nid->daemon;
}
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
static char* proc_get_hostname(orte_process_name_t *proc)
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_nid_t *nid;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (nid = orte_util_lookup_nid(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return NULL;
Allow the ESS to return the hostname and arch for a specified daemon instead of just for application procs. Uses the same API - just need to detect that the specified proc is a daemon and lookup its corresponding node in the nidmap. This commit was SVN r18722.
2008-06-24 21:53:10 +04:00
}
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s is on host %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
nid->name));
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
return nid->name;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
static uint32_t proc_get_arch(orte_process_name_t *proc)
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_nid_t *nid;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (nid = orte_util_lookup_nid(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return 0;
Allow the ESS to return the hostname and arch for a specified daemon instead of just for application procs. Uses the same API - just need to detect that the specified proc is a daemon and lookup its corresponding node in the nidmap. This commit was SVN r18722.
2008-06-24 21:53:10 +04:00
}
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s has arch %0x",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
nid->arch));
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
return nid->arch;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
Add a new grpcomm module that mimics the old 1.2 behavior - it -always- does a modex because it always includes the architecture. Hence, we called it "blind-and-dumb" since it doesn't look to see if this is required - moniker of "bad". :-) Update the ESS API so we can update the stored arch's should the modex include that info. Update ompi/proc to check/set the arch for remote procs, and add that function call to mpi_init right after the modex is done. Setup to allow other grpcomm modules to decide whether or not to add the arch to the modex, and to detect if other entries have been made. If not, then the modex can just fall through. Begin setting up some logic in the "basic" module to handle different arch situations. For now, default to the "bad" module so we will work in all situations, even though we may be sending around more info than we really require. This fixes ticket #1340 This commit was SVN r18673.
2008-06-19 02:17:53 +04:00
static int update_arch(orte_process_name_t *proc, uint32_t arch)
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_nid_t *nid;
Add a new grpcomm module that mimics the old 1.2 behavior - it -always- does a modex because it always includes the architecture. Hence, we called it "blind-and-dumb" since it doesn't look to see if this is required - moniker of "bad". :-) Update the ESS API so we can update the stored arch's should the modex include that info. Update ompi/proc to check/set the arch for remote procs, and add that function call to mpi_init right after the modex is done. Setup to allow other grpcomm modules to decide whether or not to add the arch to the modex, and to detect if other entries have been made. If not, then the modex can just fall through. Begin setting up some logic in the "basic" module to handle different arch situations. For now, default to the "bad" module so we will work in all situations, even though we may be sending around more info than we really require. This fixes ticket #1340 This commit was SVN r18673.
2008-06-19 02:17:53 +04:00
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (nid = orte_util_lookup_nid(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return ORTE_ERR_NOT_FOUND;
}
Add a new grpcomm module that mimics the old 1.2 behavior - it -always- does a modex because it always includes the architecture. Hence, we called it "blind-and-dumb" since it doesn't look to see if this is required - moniker of "bad". :-) Update the ESS API so we can update the stored arch's should the modex include that info. Update ompi/proc to check/set the arch for remote procs, and add that function call to mpi_init right after the modex is done. Setup to allow other grpcomm modules to decide whether or not to add the arch to the modex, and to detect if other entries have been made. If not, then the modex can just fall through. Begin setting up some logic in the "basic" module to handle different arch situations. For now, default to the "bad" module so we will work in all situations, even though we may be sending around more info than we really require. This fixes ticket #1340 This commit was SVN r18673.
2008-06-19 02:17:53 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
"%s ess:alps: updating proc %s to arch %0x",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
arch));
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
nid->arch = arch;
Add a new grpcomm module that mimics the old 1.2 behavior - it -always- does a modex because it always includes the architecture. Hence, we called it "blind-and-dumb" since it doesn't look to see if this is required - moniker of "bad". :-) Update the ESS API so we can update the stored arch's should the modex include that info. Update ompi/proc to check/set the arch for remote procs, and add that function call to mpi_init right after the modex is done. Setup to allow other grpcomm modules to decide whether or not to add the arch to the modex, and to detect if other entries have been made. If not, then the modex can just fall through. Begin setting up some logic in the "basic" module to handle different arch situations. For now, default to the "bad" module so we will work in all situations, even though we may be sending around more info than we really require. This fixes ticket #1340 This commit was SVN r18673.
2008-06-19 02:17:53 +04:00
return ORTE_SUCCESS;
}
MOdify the node_rank and local_rank fields to be uint16_t so we can handle more than 256 procs/node. Change the type to a defined one so that any future change can be easily done, if required. This commit was SVN r19637.
2008-09-25 17:39:08 +04:00
static orte_local_rank_t proc_get_local_rank(orte_process_name_t *proc)
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_pmap_t *pmap;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (pmap = orte_util_lookup_pmap(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return UINT8_MAX;
}
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s has local rank %d",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
(int)pmap->local_rank));
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
return pmap->local_rank;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
MOdify the node_rank and local_rank fields to be uint16_t so we can handle more than 256 procs/node. Change the type to a defined one so that any future change can be easily done, if required. This commit was SVN r19637.
2008-09-25 17:39:08 +04:00
static orte_node_rank_t proc_get_node_rank(orte_process_name_t *proc)
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
{
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
orte_pmap_t *pmap;
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (NULL == (pmap = orte_util_lookup_pmap(proc))) {
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return UINT8_MAX;
}
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((2, orte_ess_base_output,
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
"%s ess:alps: proc %s has node rank %d",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(proc),
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
(int)pmap->node_rank));
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
Repair the MPI-2 dynamic operations. This includes: 1. repair of the linear and direct routed modules 2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI 3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature 4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes. Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB 5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept. Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules. 6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch 7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch 8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies 9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc. 10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon There is still more cleanup to be done for efficiency, but this at least works. Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn. Fixes ticket #1256 This commit was SVN r18804.
2008-07-03 21:53:37 +04:00
return pmap->node_rank;
Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit. Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs. Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node. This commit was SVN r18338.
2008-04-30 23:49:53 +04:00
}
To support comm_spawn in fully routed environments, daemons need to know the route to all procs in their job family. They already had this information, but were not retaining it. The infrastructure to do so has existed for some time - just never had the time to complete it. This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message. This commit was SVN r20022.
2008-11-18 18:35:50 +03:00
static int update_pidmap(opal_byte_object_t *bo)
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
{
int ret;
/* build the pmap */
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (ORTE_SUCCESS != (ret = orte_util_decode_pidmap(bo))) {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
ORTE_ERROR_LOG(ret);
}
return ret;
}
static int update_nidmap(opal_byte_object_t *bo)
{
int rc;
/* decode the nidmap - the util will know what to do */
Expose the nidmap and pidmap as orte globals so that components in other frameworks can access and/or manipulate them without forcing API modifications - modify the individual ess components that were affected so they use the global variables. Add a list of attributes to the nids for storing node-related data (e.g., modex attrs), and define a new object for that purpose. Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects. This commit was SVN r20219.
2009-01-07 17:58:38 +03:00
if (ORTE_SUCCESS != (rc = orte_util_decode_nodemap(bo))) {
This is a first step towards supporting fully-routed OOB communications: 1. remove direct routed module (hooray!) 2. add radix tree routed module (binomial remains default) 3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess 4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support 5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability 6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon) Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm. This will require an autogen... This commit was SVN r19866.
2008-11-01 00:10:00 +03:00
ORTE_ERROR_LOG(rc);
}
return rc;
}
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
static int alps_set_name(void)
{
int rc;
int id;
orte_jobid_t jobid;
orte_vpid_t starting_vpid;
char* jobid_string;
char* vpid_string;
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((1, orte_ess_base_output,
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
"ess:alps setting name"));
id = mca_base_param_register_string("orte", "ess", "jobid", NULL, NULL);
mca_base_param_lookup_string(id, &jobid_string);
if (NULL == jobid_string) {
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return ORTE_ERR_NOT_FOUND;
}
if (ORTE_SUCCESS != (rc = orte_util_convert_string_to_jobid(&jobid, jobid_string))) {
ORTE_ERROR_LOG(rc);
return(rc);
}
id = mca_base_param_register_string("orte", "ess", "vpid", NULL, NULL);
mca_base_param_lookup_string(id, &vpid_string);
if (NULL == vpid_string) {
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return ORTE_ERR_NOT_FOUND;
}
if (ORTE_SUCCESS != (rc = orte_util_convert_string_to_vpid(&starting_vpid, vpid_string))) {
ORTE_ERROR_LOG(rc);
return(rc);
}
ORTE_PROC_MY_NAME->jobid = jobid;
ORTE_PROC_MY_NAME->vpid = (orte_vpid_t) cnos_get_rank() + starting_vpid;
Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP. After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach. I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive. This commit was SVN r18619.
2008-06-09 18:53:58 +04:00
OPAL_OUTPUT_VERBOSE((1, orte_ess_base_output,
Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately. Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer This commit was SVN r17632.
2008-02-28 04:57:57 +03:00
"ess:alps set name to %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME)));
orte_process_info.num_procs = (orte_std_cntr_t) cnos_get_size();
return ORTE_SUCCESS;
}
Копировать постоянную ссылку