ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
f2a73fcdbd
openmpi/contrib/build-mca-comps-outside-of-tree/btl_tcp2_endpoint.c
Ralph Castain a200e4f865 As per the RFC, bring in the ORTE async progress code and the rewrite of OOB: 
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***

Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.

***************************************************************************************

I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.

The code is in  https://bitbucket.org/rhc/ompi-oob2


WHAT:    Rewrite of ORTE OOB

WHY:       Support asynchronous progress and a host of other features

WHEN:    Wed, August 21

SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:

* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)

* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.

* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients

* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort

* only one transport (i.e., component) can be "active"


The revised OOB resolves these problems:

* async progress is used for all application processes, with the progress thread blocking in the event library

* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")

* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.

* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.

* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object

* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions

* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel

* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport

* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active

* all blocking send/recv APIs have been removed. Everything operates asynchronously.


KNOWN LIMITATIONS:

* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline

* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker

* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways

* obviously, not every error path has been tested nor necessarily covered

* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.

* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways

* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC

This commit was SVN r29058.
2013-08-22 16:37:40 +00:00

807 строки
29 KiB
C
Исходник Ответственный История

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2013 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2007-2008 Sun Microsystems, Inc. All rights reserved.
* Copyright (c) 2011 Cisco Systems, Inc. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*
*/
#include "ompi_config.h"
#include <stdlib.h>
#include <string.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include "opal/opal_socket_errno.h"
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_FCNTL_H
#include <fcntl.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_NETINET_TCP_H
#include <netinet/tcp.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif /* HAVE_SYS_TIME_H */
#ifdef HAVE_TIME_H
#include <time.h>
#endif /* HAVE_TIME_H */
#include "opal/mca/event/event.h"
#include "ompi/types.h"
#include "ompi/mca/btl/base/btl_base_error.h"
#include "opal/util/net.h"
#include "btl_tcp2.h"
#include "btl_tcp2_endpoint.h"
#include "btl_tcp2_proc.h"
#include "btl_tcp2_frag.h"
#include "btl_tcp2_addr.h"
/*
* Initialize state of the endpoint instance.
*
*/
static void mca_btl_tcp2_endpoint_construct(mca_btl_tcp2_endpoint_t* endpoint)
{
endpoint->endpoint_btl = NULL;
endpoint->endpoint_proc = NULL;
endpoint->endpoint_addr = NULL;
endpoint->endpoint_sd = -1;
endpoint->endpoint_send_frag = 0;
endpoint->endpoint_recv_frag = 0;
endpoint->endpoint_state = MCA_BTL_TCP_CLOSED;
endpoint->endpoint_retries = 0;
endpoint->endpoint_nbo = false;
#if MCA_BTL_TCP_ENDPOINT_CACHE
endpoint->endpoint_cache = NULL;
endpoint->endpoint_cache_pos = NULL;
endpoint->endpoint_cache_length = 0;
#endif /* MCA_BTL_TCP_ENDPOINT_CACHE */
OBJ_CONSTRUCT(&endpoint->endpoint_frags, opal_list_t);
OBJ_CONSTRUCT(&endpoint->endpoint_send_lock, opal_mutex_t);
OBJ_CONSTRUCT(&endpoint->endpoint_recv_lock, opal_mutex_t);
}
/*
* Destroy a endpoint
*
*/
static void mca_btl_tcp2_endpoint_destruct(mca_btl_tcp2_endpoint_t* endpoint)
{
mca_btl_tcp2_proc_remove(endpoint->endpoint_proc, endpoint);
mca_btl_tcp2_endpoint_close(endpoint);
OBJ_DESTRUCT(&endpoint->endpoint_frags);
OBJ_DESTRUCT(&endpoint->endpoint_send_lock);
OBJ_DESTRUCT(&endpoint->endpoint_recv_lock);
}
OBJ_CLASS_INSTANCE(
mca_btl_tcp2_endpoint_t,
opal_list_item_t,
mca_btl_tcp2_endpoint_construct,
mca_btl_tcp2_endpoint_destruct);
static void mca_btl_tcp2_endpoint_construct(mca_btl_base_endpoint_t* btl_endpoint);
static void mca_btl_tcp2_endpoint_destruct(mca_btl_base_endpoint_t* btl_endpoint);
static int mca_btl_tcp2_endpoint_start_connect(mca_btl_base_endpoint_t*);
static void mca_btl_tcp2_endpoint_connected(mca_btl_base_endpoint_t*);
static void mca_btl_tcp2_endpoint_recv_handler(int sd, short flags, void* user);
static void mca_btl_tcp2_endpoint_send_handler(int sd, short flags, void* user);
/*
* Diagnostics: change this to "1" to enable the function
* mca_btl_tcp2_endpoint_dump(), below
*/
#define WANT_PEER_DUMP 0
/*
* diagnostics
*/
#if WANT_PEER_DUMP
static void mca_btl_tcp2_endpoint_dump(mca_btl_base_endpoint_t* btl_endpoint, const char* msg)
{
char src[64];
char dst[64];
int sndbuf,rcvbuf,nodelay,flags;
#if OPAL_ENABLE_IPV6
struct sockaddr_storage inaddr;
#else
struct sockaddr_in inaddr;
#endif
opal_socklen_t obtlen;
opal_socklen_t addrlen = sizeof(inaddr);
getsockname(btl_endpoint->endpoint_sd, (struct sockaddr*)&inaddr, &addrlen);
#if OPAL_ENABLE_IPV6
{
char *address;
address = (char *) opal_net_get_hostname((struct sockaddr*) &inaddr);
if (NULL != address) {
sprintf(src, "%s", address);
}
}
#else
sprintf(src, "%s", inet_ntoa(inaddr.sin_addr));
#endif
getpeername(btl_endpoint->endpoint_sd, (struct sockaddr*)&inaddr, &addrlen);
#if OPAL_ENABLE_IPV6
{
char *address;
address = (char *) opal_net_get_hostname ((struct sockaddr*) &inaddr);
if (NULL != address) {
sprintf(dst, "%s", address);
}
}
#else
sprintf(dst, "%s", inet_ntoa(inaddr.sin_addr));
#endif
if((flags = fcntl(btl_endpoint->endpoint_sd, F_GETFL, 0)) < 0) {
BTL_ERROR(("fcntl(F_GETFL) failed: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
}
#if defined(SO_SNDBUF)
obtlen = sizeof(sndbuf);
if(getsockopt(btl_endpoint->endpoint_sd, SOL_SOCKET, SO_SNDBUF, (char *)&sndbuf, &obtlen) < 0) {
BTL_ERROR(("SO_SNDBUF option: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
}
#else
sndbuf = -1;
#endif
#if defined(SO_RCVBUF)
obtlen = sizeof(rcvbuf);
if(getsockopt(btl_endpoint->endpoint_sd, SOL_SOCKET, SO_RCVBUF, (char *)&rcvbuf, &obtlen) < 0) {
BTL_ERROR(("SO_RCVBUF option: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
}
#else
rcvbuf = -1;
#endif
#if defined(TCP_NODELAY)
obtlen = sizeof(nodelay);
if(getsockopt(btl_endpoint->endpoint_sd, IPPROTO_TCP, TCP_NODELAY, (char *)&nodelay, &obtlen) < 0) {
BTL_ERROR(("TCP_NODELAY option: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
}
#else
nodelay = 0;
#endif
BTL_VERBOSE(("%s: %s - %s nodelay %d sndbuf %d rcvbuf %d flags %08x",
msg, src, dst, nodelay, sndbuf, rcvbuf, flags));
}
#endif
/*
* Initialize events to be used by the endpoint instance for TCP select/poll callbacks.
*/
static inline void mca_btl_tcp2_endpoint_event_init(mca_btl_base_endpoint_t* btl_endpoint)
{
#if MCA_BTL_TCP_ENDPOINT_CACHE
btl_endpoint->endpoint_cache = (char*)malloc(mca_btl_tcp2_component.tcp_endpoint_cache);
btl_endpoint->endpoint_cache_pos = btl_endpoint->endpoint_cache;
#endif /* MCA_BTL_TCP_ENDPOINT_CACHE */
opal_event_set(opal_event_base, &btl_endpoint->endpoint_recv_event,
btl_endpoint->endpoint_sd,
OPAL_EV_READ|OPAL_EV_PERSIST,
mca_btl_tcp2_endpoint_recv_handler,
btl_endpoint );
/**
* The send event should be non persistent until the endpoint is
* completely connected. This means, when the event is created it
* will be fired only once, and when the endpoint is marked as
* CONNECTED the event should be recreated with the correct flags.
*/
opal_event_set(opal_event_base, &btl_endpoint->endpoint_send_event,
btl_endpoint->endpoint_sd,
OPAL_EV_WRITE,
mca_btl_tcp2_endpoint_send_handler,
btl_endpoint);
}
/*
* Attempt to send a fragment using a given endpoint. If the endpoint is not connected,
* queue the fragment and start the connection as required.
*/
int mca_btl_tcp2_endpoint_send(mca_btl_base_endpoint_t* btl_endpoint, mca_btl_tcp2_frag_t* frag)
{
int rc = OMPI_SUCCESS;
OPAL_THREAD_LOCK(&btl_endpoint->endpoint_send_lock);
switch(btl_endpoint->endpoint_state) {
case MCA_BTL_TCP_CONNECTING:
case MCA_BTL_TCP_CONNECT_ACK:
case MCA_BTL_TCP_CLOSED:
opal_list_append(&btl_endpoint->endpoint_frags, (opal_list_item_t*)frag);
frag->base.des_flags |= MCA_BTL_DES_SEND_ALWAYS_CALLBACK;
if(btl_endpoint->endpoint_state == MCA_BTL_TCP_CLOSED)
rc = mca_btl_tcp2_endpoint_start_connect(btl_endpoint);
break;
case MCA_BTL_TCP_FAILED:
rc = OMPI_ERR_UNREACH;
break;
case MCA_BTL_TCP_CONNECTED:
if (btl_endpoint->endpoint_send_frag == NULL) {
if(frag->base.des_flags & MCA_BTL_DES_FLAGS_PRIORITY &&
mca_btl_tcp2_frag_send(frag, btl_endpoint->endpoint_sd)) {
int btl_ownership = (frag->base.des_flags & MCA_BTL_DES_FLAGS_BTL_OWNERSHIP);
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
if( frag->base.des_flags & MCA_BTL_DES_SEND_ALWAYS_CALLBACK ) {
frag->base.des_cbfunc(&frag->btl->super, frag->endpoint, &frag->base, frag->rc);
}
if( btl_ownership ) {
MCA_BTL_TCP_FRAG_RETURN(frag);
}
return 1;
} else {
btl_endpoint->endpoint_send_frag = frag;
opal_event_add(&btl_endpoint->endpoint_send_event, 0);
frag->base.des_flags |= MCA_BTL_DES_SEND_ALWAYS_CALLBACK;
}
} else {
frag->base.des_flags |= MCA_BTL_DES_SEND_ALWAYS_CALLBACK;
opal_list_append(&btl_endpoint->endpoint_frags, (opal_list_item_t*)frag);
}
break;
}
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
return rc;
}
/*
* A blocking send on a non-blocking socket. Used to send the small amount of connection
* information that identifies the endpoints endpoint.
*/
static int mca_btl_tcp2_endpoint_send_blocking(mca_btl_base_endpoint_t* btl_endpoint, void* data, size_t size)
{
unsigned char* ptr = (unsigned char*)data;
size_t cnt = 0;
while(cnt < size) {
int retval = send(btl_endpoint->endpoint_sd, (const char *)ptr+cnt, size-cnt, 0);
if(retval < 0) {
if(opal_socket_errno != EINTR && opal_socket_errno != EAGAIN && opal_socket_errno != EWOULDBLOCK) {
BTL_ERROR(("send() failed: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
mca_btl_tcp2_endpoint_close(btl_endpoint);
return -1;
}
continue;
}
cnt += retval;
}
return cnt;
}
/*
* Send the globally unique identifier for this process to a endpoint on
* a newly connected socket.
*/
static int mca_btl_tcp2_endpoint_send_connect_ack(mca_btl_base_endpoint_t* btl_endpoint)
{
/* send process identifier to remote endpoint */
mca_btl_tcp2_proc_t* btl_proc = mca_btl_tcp2_proc_local();
orte_process_name_t guid = btl_proc->proc_ompi->proc_name;
ORTE_PROCESS_NAME_HTON(guid);
if(mca_btl_tcp2_endpoint_send_blocking(btl_endpoint, &guid, sizeof(guid)) !=
sizeof(guid)) {
return OMPI_ERR_UNREACH;
}
return OMPI_SUCCESS;
}
/*
* Check the state of this endpoint. If the incoming connection request matches
* our endpoints address, check the state of our connection:
* (1) if a connection has not been attempted, accept the connection
* (2) if a connection has not been established, and the endpoints process identifier
* is less than the local process, accept the connection
* otherwise, reject the connection and continue with the current connection
*/
bool mca_btl_tcp2_endpoint_accept(mca_btl_base_endpoint_t* btl_endpoint,
struct sockaddr* addr, int sd)
{
mca_btl_tcp2_proc_t* this_proc = mca_btl_tcp2_proc_local();
mca_btl_tcp2_proc_t *endpoint_proc = btl_endpoint->endpoint_proc;
int cmpval;
OPAL_THREAD_LOCK(&btl_endpoint->endpoint_recv_lock);
OPAL_THREAD_LOCK(&btl_endpoint->endpoint_send_lock);
if(NULL == btl_endpoint->endpoint_addr) {
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
return false;
}
cmpval = orte_util_compare_name_fields(ORTE_NS_CMP_ALL,
&endpoint_proc->proc_ompi->proc_name,
&this_proc->proc_ompi->proc_name);
if((btl_endpoint->endpoint_sd < 0) ||
(btl_endpoint->endpoint_state != MCA_BTL_TCP_CONNECTED &&
cmpval < 0)) {
mca_btl_tcp2_endpoint_close(btl_endpoint);
btl_endpoint->endpoint_sd = sd;
if(mca_btl_tcp2_endpoint_send_connect_ack(btl_endpoint) != OMPI_SUCCESS) {
mca_btl_tcp2_endpoint_close(btl_endpoint);
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
return false;
}
mca_btl_tcp2_endpoint_event_init(btl_endpoint);
opal_event_add(&btl_endpoint->endpoint_recv_event, 0);
mca_btl_tcp2_endpoint_connected(btl_endpoint);
#if OPAL_ENABLE_DEBUG && WANT_PEER_DUMP
mca_btl_tcp2_endpoint_dump(btl_endpoint, "accepted");
#endif
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
return true;
}
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
return false;
}
/*
* Remove any event registrations associated with the socket
* and update the endpoint state to reflect the connection has
* been closed.
*/
void mca_btl_tcp2_endpoint_close(mca_btl_base_endpoint_t* btl_endpoint)
{
if(btl_endpoint->endpoint_sd < 0)
return;
btl_endpoint->endpoint_state = MCA_BTL_TCP_CLOSED;
btl_endpoint->endpoint_retries++;
opal_event_del(&btl_endpoint->endpoint_recv_event);
opal_event_del(&btl_endpoint->endpoint_send_event);
CLOSE_THE_SOCKET(btl_endpoint->endpoint_sd);
btl_endpoint->endpoint_sd = -1;
#if MCA_BTL_TCP_ENDPOINT_CACHE
free( btl_endpoint->endpoint_cache );
btl_endpoint->endpoint_cache = NULL;
btl_endpoint->endpoint_cache_pos = NULL;
btl_endpoint->endpoint_cache_length = 0;
#endif /* MCA_BTL_TCP_ENDPOINT_CACHE */
}
/*
* Setup endpoint state to reflect that connection has been established,
* and start any pending sends. This function should be called with the
* send lock locked.
*/
static void mca_btl_tcp2_endpoint_connected(mca_btl_base_endpoint_t* btl_endpoint)
{
/* setup socket options */
btl_endpoint->endpoint_state = MCA_BTL_TCP_CONNECTED;
btl_endpoint->endpoint_retries = 0;
/* Create the send event in a persistent manner. */
opal_event_set(opal_event_base, &btl_endpoint->endpoint_send_event,
btl_endpoint->endpoint_sd,
OPAL_EV_WRITE | OPAL_EV_PERSIST,
mca_btl_tcp2_endpoint_send_handler,
btl_endpoint );
if(opal_list_get_size(&btl_endpoint->endpoint_frags) > 0) {
if(NULL == btl_endpoint->endpoint_send_frag)
btl_endpoint->endpoint_send_frag = (mca_btl_tcp2_frag_t*)
opal_list_remove_first(&btl_endpoint->endpoint_frags);
opal_event_add(&btl_endpoint->endpoint_send_event, 0);
}
}
/*
* A blocking recv on a non-blocking socket. Used to receive the small amount of connection
* information that identifies the endpoints endpoint.
*/
static int mca_btl_tcp2_endpoint_recv_blocking(mca_btl_base_endpoint_t* btl_endpoint, void* data, size_t size)
{
unsigned char* ptr = (unsigned char*)data;
size_t cnt = 0;
while(cnt < size) {
int retval = recv(btl_endpoint->endpoint_sd, (char *)ptr+cnt, size-cnt, 0);
/* remote closed connection */
if(retval == 0) {
mca_btl_tcp2_endpoint_close(btl_endpoint);
return -1;
}
/* socket is non-blocking so handle errors */
if(retval < 0) {
if(opal_socket_errno != EINTR && opal_socket_errno != EAGAIN && opal_socket_errno != EWOULDBLOCK) {
BTL_ERROR(("recv(%d) failed: %s (%d)",
btl_endpoint->endpoint_sd, strerror(opal_socket_errno), opal_socket_errno));
mca_btl_tcp2_endpoint_close(btl_endpoint);
return -1;
}
continue;
}
cnt += retval;
}
return cnt;
}
/*
* Receive the endpoints globally unique process identification from a newly
* connected socket and verify the expected response. If so, move the
* socket to a connected state.
*/
static int mca_btl_tcp2_endpoint_recv_connect_ack(mca_btl_base_endpoint_t* btl_endpoint)
{
orte_process_name_t guid;
mca_btl_tcp2_proc_t* btl_proc = btl_endpoint->endpoint_proc;
if((mca_btl_tcp2_endpoint_recv_blocking(btl_endpoint, &guid, sizeof(orte_process_name_t))) != sizeof(orte_process_name_t)) {
return OMPI_ERR_UNREACH;
}
ORTE_PROCESS_NAME_NTOH(guid);
/* compare this to the expected values */
if (OPAL_EQUAL != orte_util_compare_name_fields(ORTE_NS_CMP_ALL,
&btl_proc->proc_ompi->proc_name,
&guid)) {
BTL_ERROR(("received unexpected process identifier %s",
ORTE_NAME_PRINT(&guid)));
mca_btl_tcp2_endpoint_close(btl_endpoint);
return OMPI_ERR_UNREACH;
}
return OMPI_SUCCESS;
}
void mca_btl_tcp2_set_socket_options(int sd)
{
int optval;
#if defined(TCP_NODELAY)
optval = mca_btl_tcp2_component.tcp_use_nodelay;
if(setsockopt(sd, IPPROTO_TCP, TCP_NODELAY, (char *)&optval, sizeof(optval)) < 0) {
BTL_ERROR(("setsockopt(TCP_NODELAY) failed: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
}
#endif
#if defined(SO_SNDBUF)
if(mca_btl_tcp2_component.tcp_sndbuf > 0 &&
setsockopt(sd, SOL_SOCKET, SO_SNDBUF, (char *)&mca_btl_tcp2_component.tcp_sndbuf, sizeof(int)) < 0) {
BTL_ERROR(("setsockopt(SO_SNDBUF) failed: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
}
#endif
#if defined(SO_RCVBUF)
if(mca_btl_tcp2_component.tcp_rcvbuf > 0 &&
setsockopt(sd, SOL_SOCKET, SO_RCVBUF, (char *)&mca_btl_tcp2_component.tcp_rcvbuf, sizeof(int)) < 0) {
BTL_ERROR(("setsockopt(SO_RCVBUF) failed: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
}
#endif
}
/*
* Start a connection to the endpoint. This will likely not complete,
* as the socket is set to non-blocking, so register for event
* notification of connect completion. On connection we send
* our globally unique process identifier to the endpoint and wait for
* the endpoints response.
*/
static int mca_btl_tcp2_endpoint_start_connect(mca_btl_base_endpoint_t* btl_endpoint)
{
int rc,flags;
struct sockaddr_storage endpoint_addr;
/* By default consider a IPv4 connection */
uint16_t af_family = AF_INET;
opal_socklen_t addrlen = sizeof(struct sockaddr_in);
#if OPAL_ENABLE_IPV6
if (AF_INET6 == btl_endpoint->endpoint_addr->addr_family) {
af_family = AF_INET6;
addrlen = sizeof (struct sockaddr_in6);
}
#endif
btl_endpoint->endpoint_sd = socket(af_family, SOCK_STREAM, 0);
if (btl_endpoint->endpoint_sd < 0) {
btl_endpoint->endpoint_retries++;
return OMPI_ERR_UNREACH;
}
/* setup socket buffer sizes */
mca_btl_tcp2_set_socket_options(btl_endpoint->endpoint_sd);
/* setup event callbacks */
mca_btl_tcp2_endpoint_event_init(btl_endpoint);
/* setup the socket as non-blocking */
if((flags = fcntl(btl_endpoint->endpoint_sd, F_GETFL, 0)) < 0) {
BTL_ERROR(("fcntl(F_GETFL) failed: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
} else {
flags |= O_NONBLOCK;
if(fcntl(btl_endpoint->endpoint_sd, F_SETFL, flags) < 0)
BTL_ERROR(("fcntl(F_SETFL) failed: %s (%d)",
strerror(opal_socket_errno), opal_socket_errno));
}
/* start the connect - will likely fail with EINPROGRESS */
mca_btl_tcp2_proc_tosocks(btl_endpoint->endpoint_addr, &endpoint_addr);
opal_output_verbose(20, mca_btl_base_output,
"btl: tcp: attempting to connect() to address %s on port %d",
opal_net_get_hostname((struct sockaddr*) &endpoint_addr),
btl_endpoint->endpoint_addr->addr_port);
if(connect(btl_endpoint->endpoint_sd, (struct sockaddr*)&endpoint_addr, addrlen) < 0) {
/* non-blocking so wait for completion */
if(opal_socket_errno == EINPROGRESS || opal_socket_errno == EWOULDBLOCK) {
btl_endpoint->endpoint_state = MCA_BTL_TCP_CONNECTING;
opal_event_add(&btl_endpoint->endpoint_send_event, 0);
return OMPI_SUCCESS;
}
{
char *address;
address = opal_net_get_hostname((struct sockaddr*) &endpoint_addr);
BTL_PEER_ERROR( btl_endpoint->endpoint_proc->proc_ompi,
( "Unable to connect to the peer %s on port %d: %s\n",
address,
btl_endpoint->endpoint_addr->addr_port, strerror(opal_socket_errno) ) );
}
mca_btl_tcp2_endpoint_close(btl_endpoint);
btl_endpoint->endpoint_retries++;
return OMPI_ERR_UNREACH;
}
/* send our globally unique process identifier to the endpoint */
if((rc = mca_btl_tcp2_endpoint_send_connect_ack(btl_endpoint)) == OMPI_SUCCESS) {
btl_endpoint->endpoint_state = MCA_BTL_TCP_CONNECT_ACK;
opal_event_add(&btl_endpoint->endpoint_recv_event, 0);
} else {
mca_btl_tcp2_endpoint_close(btl_endpoint);
}
return rc;
}
/*
* Check the status of the connection. If the connection failed, will retry
* later. Otherwise, send this processes identifier to the endpoint on the
* newly connected socket.
*/
static void mca_btl_tcp2_endpoint_complete_connect(mca_btl_base_endpoint_t* btl_endpoint)
{
int so_error = 0;
opal_socklen_t so_length = sizeof(so_error);
struct sockaddr_storage endpoint_addr;
mca_btl_tcp2_proc_tosocks(btl_endpoint->endpoint_addr, &endpoint_addr);
/* unregister from receiving event notifications */
opal_event_del(&btl_endpoint->endpoint_send_event);
/* check connect completion status */
if(getsockopt(btl_endpoint->endpoint_sd, SOL_SOCKET, SO_ERROR, (char *)&so_error, &so_length) < 0) {
BTL_ERROR(("getsockopt() to %s failed: %s (%d)",
opal_net_get_hostname((struct sockaddr*) &endpoint_addr),
strerror(opal_socket_errno), opal_socket_errno));
mca_btl_tcp2_endpoint_close(btl_endpoint);
return;
}
if(so_error == EINPROGRESS || so_error == EWOULDBLOCK) {
opal_event_add(&btl_endpoint->endpoint_send_event, 0);
return;
}
if(so_error != 0) {
BTL_ERROR(("connect() to %s failed: %s (%d)",
opal_net_get_hostname((struct sockaddr*) &endpoint_addr),
strerror(so_error), so_error));
mca_btl_tcp2_endpoint_close(btl_endpoint);
return;
}
if(mca_btl_tcp2_endpoint_send_connect_ack(btl_endpoint) == OMPI_SUCCESS) {
btl_endpoint->endpoint_state = MCA_BTL_TCP_CONNECT_ACK;
opal_event_add(&btl_endpoint->endpoint_recv_event, 0);
} else {
mca_btl_tcp2_endpoint_close(btl_endpoint);
}
}
/*
* A file descriptor is available/ready for recv. Check the state
* of the socket and take the appropriate action.
*/
static void mca_btl_tcp2_endpoint_recv_handler(int sd, short flags, void* user)
{
mca_btl_base_endpoint_t* btl_endpoint = (mca_btl_base_endpoint_t *)user;
/* Make sure we don't have a race between a thread that remove the
* recv event, and one event already scheduled.
*/
if( sd != btl_endpoint->endpoint_sd )
return;
OPAL_THREAD_LOCK(&btl_endpoint->endpoint_recv_lock);
switch(btl_endpoint->endpoint_state) {
case MCA_BTL_TCP_CONNECT_ACK:
{
int rc = OMPI_ERROR;
rc = mca_btl_tcp2_endpoint_recv_connect_ack(btl_endpoint);
if( OMPI_SUCCESS == rc ) {
/* we are now connected. Start sending the data */
OPAL_THREAD_LOCK(&btl_endpoint->endpoint_send_lock);
mca_btl_tcp2_endpoint_connected(btl_endpoint);
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
#if OPAL_ENABLE_DEBUG && WANT_PEER_DUMP
mca_btl_tcp2_endpoint_dump(btl_endpoint, "connected");
#endif
}
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
return;
}
case MCA_BTL_TCP_CONNECTED:
{
mca_btl_tcp2_frag_t* frag;
frag = btl_endpoint->endpoint_recv_frag;
if(NULL == frag) {
if(mca_btl_tcp2_module.super.btl_max_send_size >
mca_btl_tcp2_module.super.btl_eager_limit) {
MCA_BTL_TCP_FRAG_ALLOC_MAX(frag);
} else {
MCA_BTL_TCP_FRAG_ALLOC_EAGER(frag);
}
if(NULL == frag) {
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
return;
}
MCA_BTL_TCP_FRAG_INIT_DST(frag, btl_endpoint);
}
#if MCA_BTL_TCP_ENDPOINT_CACHE
assert( 0 == btl_endpoint->endpoint_cache_length );
data_still_pending_on_endpoint:
#endif /* MCA_BTL_TCP_ENDPOINT_CACHE */
/* check for completion of non-blocking recv on the current fragment */
if(mca_btl_tcp2_frag_recv(frag, btl_endpoint->endpoint_sd) == false) {
btl_endpoint->endpoint_recv_frag = frag;
} else {
btl_endpoint->endpoint_recv_frag = NULL;
if( MCA_BTL_TCP_HDR_TYPE_SEND == frag->hdr.type ) {
mca_btl_active_message_callback_t* reg;
reg = mca_btl_base_active_message_trigger + frag->hdr.base.tag;
reg->cbfunc(&frag->btl->super, frag->hdr.base.tag, &frag->base, reg->cbdata);
}
#if MCA_BTL_TCP_ENDPOINT_CACHE
if( 0 != btl_endpoint->endpoint_cache_length ) {
/* If the cache still contain some data we can reuse the same fragment
* until we flush it completly.
*/
MCA_BTL_TCP_FRAG_INIT_DST(frag, btl_endpoint);
goto data_still_pending_on_endpoint;
}
#endif /* MCA_BTL_TCP_ENDPOINT_CACHE */
MCA_BTL_TCP_FRAG_RETURN(frag);
}
#if MCA_BTL_TCP_ENDPOINT_CACHE
assert( 0 == btl_endpoint->endpoint_cache_length );
#endif /* MCA_BTL_TCP_ENDPOINT_CACHE */
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
break;
}
case MCA_BTL_TCP_CLOSED:
/* This is a thread-safety issue. As multiple threads are allowed
* to generate events (in the lib event) we endup with several
* threads executing the receive callback, when we reach the end
* of the MPI_Finalize. The first one will close the connections,
* and all others will complain.
*/
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
break;
default:
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_recv_lock);
BTL_ERROR(("invalid socket state(%d)", btl_endpoint->endpoint_state));
mca_btl_tcp2_endpoint_close(btl_endpoint);
break;
}
}
/*
* A file descriptor is available/ready for send. Check the state
* of the socket and take the appropriate action.
*/
static void mca_btl_tcp2_endpoint_send_handler(int sd, short flags, void* user)
{
mca_btl_tcp2_endpoint_t* btl_endpoint = (mca_btl_tcp2_endpoint_t *)user;
OPAL_THREAD_LOCK(&btl_endpoint->endpoint_send_lock);
switch(btl_endpoint->endpoint_state) {
case MCA_BTL_TCP_CONNECTING:
mca_btl_tcp2_endpoint_complete_connect(btl_endpoint);
break;
case MCA_BTL_TCP_CONNECTED:
/* complete the current send */
while (NULL != btl_endpoint->endpoint_send_frag) {
mca_btl_tcp2_frag_t* frag = btl_endpoint->endpoint_send_frag;
int btl_ownership = (frag->base.des_flags & MCA_BTL_DES_FLAGS_BTL_OWNERSHIP);
if(mca_btl_tcp2_frag_send(frag, btl_endpoint->endpoint_sd) == false) {
break;
}
/* progress any pending sends */
btl_endpoint->endpoint_send_frag = (mca_btl_tcp2_frag_t*)
opal_list_remove_first(&btl_endpoint->endpoint_frags);
/* if required - update request status and release fragment */
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
assert( frag->base.des_flags & MCA_BTL_DES_SEND_ALWAYS_CALLBACK );
frag->base.des_cbfunc(&frag->btl->super, frag->endpoint, &frag->base, frag->rc);
if( btl_ownership ) {
MCA_BTL_TCP_FRAG_RETURN(frag);
}
OPAL_THREAD_LOCK(&btl_endpoint->endpoint_send_lock);
}
/* if nothing else to do unregister for send event notifications */
if(NULL == btl_endpoint->endpoint_send_frag) {
opal_event_del(&btl_endpoint->endpoint_send_event);
}
break;
default:
BTL_ERROR(("invalid connection state (%d)", btl_endpoint->endpoint_state));
opal_event_del(&btl_endpoint->endpoint_send_event);
break;
}
OPAL_THREAD_UNLOCK(&btl_endpoint->endpoint_send_lock);
}
Показать git blame Копировать постоянную ссылку