1
1
openmpi/ompi/mca/pml/dr/pml_dr_vfrag.h
Rainer Keller 8e1b23779f - Replace combinations of
#if defined (c_plusplus)
          defined (__cplusplus)
   followed by
      extern "C" {
   and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.

   Notable exceptions are:
    - opal/include/opal_config_bottom.h:
      This is our generated code, that itself defines BEGIN_C_DECL and
      END_C_DECL
    - ompi/mpi/cxx/mpicxx.h:
      Here we do not include opal_config_bottom.h:                                 
    - Belongs to external code:                                                    
      opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c        
      opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h        
    - opal/include/opal/prefetch.h:
      Has C++ specific macros that are protected:                                  

    - Had #if ... } #endif  _and_ END_C_DECLS (aka end up with 2x
      END_C_DECLS)
      ompi/mca/btl/openib/btl_openib.h
    - opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
    - opal/win32/ompi_process.h: had extern "C"\n {...
      opal/win32/ompi_process.h: dito
    - ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
      ompi/mpi/f90/test/align_c.c: dito
    - ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
    - ompi/mpi/f90/xml/common-C.xsl: Amend

   Tested on linux using --with-openib and --with-mx

   The following do not contain either opal_config.h, orte_config.h or
   ompi_config.h
   (but possibly other header files, that include one of the above):
      ompi/mca/bml/r2/bml_r2_ft.h
      ompi/mca/btl/gm/btl_gm_endpoint.h
      ompi/mca/btl/gm/btl_gm_proc.h
      ompi/mca/btl/mx/btl_mx_endpoint.h
      ompi/mca/btl/ofud/btl_ofud_endpoint.h
      ompi/mca/btl/ofud/btl_ofud_frag.h
      ompi/mca/btl/ofud/btl_ofud_proc.h
      ompi/mca/btl/openib/btl_openib_mca.h
      ompi/mca/btl/portals/btl_portals_endpoint.h
      ompi/mca/btl/portals/btl_portals_frag.h
      ompi/mca/btl/sctp/btl_sctp_endpoint.h
      ompi/mca/btl/sctp/btl_sctp_proc.h
      ompi/mca/btl/tcp/btl_tcp_endpoint.h
      ompi/mca/btl/tcp/btl_tcp_ft.h
      ompi/mca/btl/tcp/btl_tcp_proc.h
      ompi/mca/btl/template/btl_template_endpoint.h
      ompi/mca/btl/template/btl_template_proc.h
      ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
      ompi/mca/btl/udapl/btl_udapl_endpoint.h
      ompi/mca/btl/udapl/btl_udapl_mca.h
      ompi/mca/btl/udapl/btl_udapl_proc.h
      ompi/mca/mtl/mx/mtl_mx_endpoint.h
      ompi/mca/mtl/mx/mtl_mx.h
      ompi/mca/mtl/psm/mtl_psm_endpoint.h
      ompi/mca/mtl/psm/mtl_psm.h
      ompi/mca/pml/cm/pml_cm_component.h
      ompi/mca/pml/csum/pml_csum_comm.h
      ompi/mca/pml/dr/pml_dr_comm.h
      ompi/mca/pml/dr/pml_dr_component.h
      ompi/mca/pml/dr/pml_dr_endpoint.h
      ompi/mca/pml/dr/pml_dr_recvfrag.h
      ompi/mca/pml/example/pml_example.h
      ompi/mca/pml/ob1/pml_ob1_comm.h
      ompi/mca/pml/ob1/pml_ob1_component.h
      ompi/mca/pml/ob1/pml_ob1_endpoint.h
      ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
      ompi/mca/pml/ob1/pml_ob1_recvfrag.h
      ompi/mca/pml/v/pml_v_output.h
      opal/include/opal/prefetch.h
      opal/mca/timer/aix/timer_aix.h
      opal/util/qsort.h
      test/support/components.h

This commit was SVN r21855.

The following SVN revision numbers were found above:
  r2 --> open-mpi/ompi@58fdc18855
2009-08-20 11:42:18 +00:00

153 строки
5.5 KiB
C

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2006 The Regents of the University of California.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
/**
* @file
*/
#ifndef OMPI_PML_DR_VFRAG_H_
#define OMPI_PML_DR_VFRAG_H_
#include "ompi_config.h"
#include "opal/event/event.h"
#include "opal/types.h"
#include "pml_dr.h"
BEGIN_C_DECLS
#define MCA_PML_DR_VFRAG_NACKED 0x01
#define MCA_PML_DR_VFRAG_RNDV 0x02
#define MCA_PML_DR_VFRAG_RETRANS 0x04
struct mca_pml_dr_vfrag_t {
ompi_free_list_item_t super;
ompi_ptr_t vf_send;
ompi_ptr_t vf_recv;
uint32_t vf_id;
uint16_t vf_idx;
uint16_t vf_len;
size_t vf_offset;
size_t vf_size;
size_t vf_max_send_size;
uint64_t vf_ack;
uint64_t vf_mask;
int64_t vf_pending;
uint32_t vf_state;
struct mca_bml_base_btl_t* bml_btl;
/* we need a timer for the vfrag for:
1) a watchdog timer for local completion of the current
operation
2) a timeout for ACK of the VRAG
*/
struct timeval vf_wdog_tv;
opal_event_t vf_wdog_ev;
uint8_t vf_wdog_cnt;
struct timeval vf_ack_tv;
opal_event_t vf_ack_ev;
uint8_t vf_ack_cnt;
};
typedef struct mca_pml_dr_vfrag_t mca_pml_dr_vfrag_t;
OBJ_CLASS_DECLARATION(mca_pml_dr_vfrag_t);
#define MCA_PML_DR_VFRAG_ALLOC(vfrag,rc) \
do { \
ompi_free_list_item_t* item; \
OMPI_FREE_LIST_WAIT(&mca_pml_dr.vfrags, item, rc); \
vfrag = (mca_pml_dr_vfrag_t*)item; \
} while(0)
#define MCA_PML_DR_VFRAG_RETURN(vfrag) \
do { \
OMPI_FREE_LIST_RETURN(&mca_pml_dr.vfrags, \
(ompi_free_list_item_t*)vfrag); \
} while(0)
#define MCA_PML_DR_VFRAG_INIT(vfrag) \
do { \
(vfrag)->vf_idx = 0; \
(vfrag)->vf_ack = 0; \
(vfrag)->vf_wdog_cnt = 0; \
(vfrag)->vf_ack_cnt = 0; \
(vfrag)->vf_recv.pval = NULL; \
(vfrag)->vf_state = 0; \
(vfrag)->vf_pending = 0; \
(vfrag)->vf_wdog_tv = mca_pml_dr.wdog_timer; \
(vfrag)->vf_ack_tv = mca_pml_dr.ack_timer; \
} while(0)
/*
* Watchdog Timer
*/
#define MCA_PML_DR_VFRAG_WDOG_START(vfrag) \
do { \
opal_event_add(&(vfrag)->vf_wdog_ev, &(vfrag)->vf_wdog_tv); \
} while(0)
#define MCA_PML_DR_VFRAG_WDOG_STOP(vfrag) \
do { \
opal_event_del(&(vfrag)->vf_wdog_ev); \
} while(0)
#define MCA_PML_DR_VFRAG_WDOG_RESET(vfrag) \
do { \
opal_event_del(&(vfrag)->vf_wdog_ev); \
opal_event_add(&(vfrag)->vf_wdog_ev, &vfrag->vf_wdog_tv); \
} while(0)
/*
* Ack Timer
*/
#define MCA_PML_DR_VFRAG_ACK_START(vfrag) \
do { \
opal_event_add(&(vfrag)->vf_ack_ev, &(vfrag)->vf_ack_tv); \
} while(0)
#define MCA_PML_DR_VFRAG_ACK_STOP(vfrag) \
do { \
opal_event_del(&vfrag->vf_ack_ev); \
} while(0)
#define MCA_PML_DR_VFRAG_ACK_RESET(vfrag) \
do { \
MCA_PML_DR_VFRAG_ACK_STOP(vfrag); \
MCA_PML_DR_VFRAG_ACK_START(vfrag); \
} while(0)
/**
* Reset a VFRAG to use a new BTL
*/
void mca_pml_dr_vfrag_reset(mca_pml_dr_vfrag_t*);
/**
* Reschedule a vfrag that has timed out
*/
void mca_pml_dr_vfrag_reschedule(mca_pml_dr_vfrag_t*);
END_C_DECLS
#endif