ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
e4744b4ed5
openmpi/ompi/tools/ortetools/Makefile.am
Josh Hursey e12ca48cd9 A number of C/R enhancements per RFC below: 
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php

Documentation:
  http://osl.iu.edu/research/ft/

Major Changes: 
-------------- 
 * Added C/R-enabled Debugging support. 
   Enabled with the --enable-crdebug flag. See the following website for more information: 
   http://osl.iu.edu/research/ft/crdebug/ 
 * Added Stable Storage (SStore) framework for checkpoint storage 
   * 'central' component does a direct to central storage save 
   * 'stage' component stages checkpoints to central storage while the application continues execution. 
     * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) 
     * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) 
 * Added Compression (compress) framework to support 
 * Add two new ErrMgr recovery policies 
   * {{{crmig}}} C/R Process Migration 
   * {{{autor}}} C/R Automatic Recovery 
 * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component 
 * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) 
   * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) 
   * {{{OMPI_CR_Restart}}} 
   * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) 
   * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) 
   * {{{OMPI_CR_Quiesce_start}}} 
   * {{{OMPI_CR_Quiesce_checkpoint}}} 
   * {{{OMPI_CR_Quiesce_end}}} 
   * {{{OMPI_CR_self_register_checkpoint_callback}}} 
   * {{{OMPI_CR_self_register_restart_callback}}} 
   * {{{OMPI_CR_self_register_continue_callback}}} 
 * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. 
 * Add a progress meter to: 
   * FileM rsh (filem_rsh_process_meter) 
   * SnapC full (snapc_full_progress_meter) 
   * SStore stage (sstore_stage_progress_meter) 
 * Added 2 new command line options to ompi-restart 
   * --showme : Display the full command line that would have been exec'ed. 
   * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) 
 * Deprecated some MCA params: 
   * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir 
   * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir 
   * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared 
   * snapc_base_store_in_place deprecated, replaced with different components of SStore 
   * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref 
   * snapc_base_establish_global_snapshot_dir deprecated, never well supported 
   * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem 

Minor Changes: 
-------------- 
 * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. 
 * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components 
 * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. 
 * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} 
 * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. 
 * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. 
 * Cleanup the CRS framework and components to work with the SStore framework. 
 * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). 
 * Add 'quiesce' hook to CRCP for a future enhancement. 
 * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. 
 * Add optional application level INC callbacks (registered through the CR MPI Ext interface). 
 * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. 
 * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. 
 * {{{opal-restart}}} also support local decompression before restarting 
 * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata 
 * {{{orte-restart}}} now uses the SStore framework to work with the metadata 
 * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. 
 * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. 
 * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. 
 * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. 
 * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. 
 * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. 
 * Improve the checks for 'already checkpointing' error path. 
 * A a recovery output timer, to show how long it takes to restart a job 
 * Do a better job of cleaning up the old session directory on restart. 
 * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) 
 * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. 

This commit was SVN r23587.

The following Trac tickets were found above:
  Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
  Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
  Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
  Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
  Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
  Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
  Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00

114 строки
4.7 KiB
Makefile
Исходник Ответственный История

#
# Copyright (c) 2004-2010 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2008-2010 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2009-2010 Sun Microsystems, Inc. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
man_pages = mpirun.1 mpiexec.1 ompi-ps.1 ompi-iof.1 ompi-clean.1 ompi-top.1
if WANT_FT
man_pages += ompi-checkpoint.1 ompi-restart.1
endif
if OMPI_INSTALL_BINARIES
if !ORTE_DISABLE_FULL_SUPPORT
nodist_man_MANS = $(man_pages)
install-exec-hook:
(cd $(DESTDIR)$(bindir); rm -f mpirun$(EXEEXT); $(LN_S) orterun$(EXEEXT) mpirun$(EXEEXT))
(cd $(DESTDIR)$(bindir); rm -f mpiexec$(EXEEXT); $(LN_S) orterun$(EXEEXT) mpiexec$(EXEEXT))
(cd $(DESTDIR)$(bindir); rm -f ompi-ps$(EXEEXT); $(LN_S) orte-ps$(EXEEXT) ompi-ps$(EXEEXT))
(cd $(DESTDIR)$(bindir); rm -f ompi-clean$(EXEEXT); $(LN_S) orte-clean$(EXEEXT) ompi-clean$(EXEEXT))
(cd $(DESTDIR)$(bindir); rm -f ompi-iof$(EXEEXT); $(LN_S) orte-iof$(EXEEXT) ompi-iof$(EXEEXT))
(cd $(DESTDIR)$(bindir); rm -f ompi-top$(EXEEXT); $(LN_S) orte-top$(EXEEXT) ompi-top$(EXEEXT))
if WANT_FT
(cd $(DESTDIR)$(bindir); rm -f ompi-checkpoint$(EXEEXT); $(LN_S) orte-checkpoint$(EXEEXT) ompi-checkpoint$(EXEEXT))
(cd $(DESTDIR)$(bindir); rm -f ompi-restart$(EXEEXT); $(LN_S) orte-restart$(EXEEXT) ompi-restart$(EXEEXT))
(cd $(DESTDIR)$(bindir); rm -f ompi-migrate$(EXEEXT); $(LN_S) orte-migrate$(EXEEXT) ompi-migrate$(EXEEXT))
endif
uninstall-local:
rm -f $(DESTDIR)$(bindir)/mpirun$(EXEEXT) \
$(DESTDIR)$(bindir)/mpiexec$(EXEEXT) \
$(DESTDIR)$(bindir)/ompi-ps$(EXEEXT) \
$(DESTDIR)$(bindir)/ompi-clean$(EXEEXT) \
$(DESTDIR)$(bindir)/ompi-iof$(EXEEXT) \
$(DESTDIR)$(bindir)/ompi-top$(EXEEXT)
if WANT_FT
rm -f $(DESTDIR)$(bindir)/ompi-checkpoint$(EXEEXT) \
$(DESTDIR)$(bindir)/ompi-restart$(EXEEXT) \
$(DESTDIR)$(bindir)/ompi-migrate$(EXEEXT)
endif
endif # !ORTE_DISABLE_FULL_SUPPORT
endif # OMPI_INSTALL_BINARIES
$(top_builddir)/orte/tools/orterun/orterun.1:
(cd $(top_builddir)/orte/tools/orterun && $(MAKE) $(AM_MAKEFLAGS) orterun.1)
mpirun.1: $(top_builddir)/orte/tools/orterun/orterun.1
cp -f $(top_builddir)/orte/tools/orterun/orterun.1 mpirun.1
mpiexec.1: $(top_builddir)/orte/tools/orterun/orterun.1
cp -f $(top_builddir)/orte/tools/orterun/orterun.1 mpiexec.1
$(top_builddir)/orte/tools/orte-ps/orte-ps.1:
(cd $(top_builddir)/orte/tools/orte-ps && $(MAKE) $(AM_MAKEFLAGS) orte-ps.1)
ompi-ps.1: $(top_builddir)/orte/tools/orte-ps/orte-ps.1
cp -f $(top_builddir)/orte/tools/orte-ps/orte-ps.1 ompi-ps.1
$(top_builddir)/orte/tools/orte-clean/orte-clean.1:
(cd $(top_builddir)/orte/tools/orte-clean && $(MAKE) $(AM_MAKEFLAGS) orte-clean.1)
ompi-clean.1: $(top_builddir)/orte/tools/orte-clean/orte-clean.1
cp -f $(top_builddir)/orte/tools/orte-clean/orte-clean.1 ompi-clean.1
$(top_builddir)/orte/tools/orte-checkpoint/orte-checkpoint.1:
(cd $(top_builddir)/orte/tools/orte-checkpoint && $(MAKE) $(AM_MAKEFLAGS) orte-checkpoint.1)
ompi-checkpoint.1: $(top_builddir)/orte/tools/orte-checkpoint/orte-checkpoint.1
cp -f $(top_builddir)/orte/tools/orte-checkpoint/orte-checkpoint.1 ompi-checkpoint.1
$(top_builddir)/orte/tools/orte-iof/orte-iof.1:
(cd $(top_builddir)/orte/tools/orte-iof && $(MAKE) $(AM_MAKEFLAGS) orte-iof.1)
ompi-iof.1: $(top_builddir)/orte/tools/orte-iof/orte-iof.1
cp -f $(top_builddir)/orte/tools/orte-iof/orte-iof.1 ompi-iof.1
$(top_builddir)/orte/tools/orte-restart/orte-restart.1:
(cd $(top_builddir)/orte/tools/orte-restart && $(MAKE) $(AM_MAKEFLAGS) orte-restart.1)
ompi-restart.1: $(top_builddir)/orte/tools/orte-restart/orte-restart.1
cp -f $(top_builddir)/orte/tools/orte-restart/orte-restart.1 ompi-restart.1
$(top_builddir)/orte/tools/orte-migrate/orte-migrate.1:
(cd $(top_builddir)/orte/tools/orte-migrate && $(MAKE) $(AM_MAKEFLAGS) orte-migrate.1)
ompi-migrate.1: $(top_builddir)/orte/tools/orte-migrate/orte-migrate.1
cp -f $(top_builddir)/orte/tools/orte-migrate/orte-migrate.1 ompi-migrate.1
$(top_builddir)/orte/tools/orte-top/orte-top.1:
(cd $(top_builddir)/orte/tools/orte-top && $(MAKE) $(AM_MAKEFLAGS) orte-top.1)
ompi-top.1: $(top_builddir)/orte/tools/orte-top/orte-top.1
cp -f $(top_builddir)/orte/tools/orte-top/orte-top.1 ompi-top.1
distclean-local:
rm -f $(man_pages)
Показать git blame Копировать постоянную ссылку