ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
dfd34eb4e3
openmpi/contrib/dist/make_dist_tarball

456 строки
13 KiB
Bash
Исполняемый файл
Исходник Ответственный История

#!/bin/sh
#
# Copyright (c) 2004-2006 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2008-2015 Cisco Systems, Inc. All rights reserved.
# Copyright (c) 2016 Intel, Inc. All rights reserved
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
#
# Version of auto tools that we want
#
M4_TARGET_VERSION=1.4.17
AM_TARGET_VERSION=1.15
AC_TARGET_VERSION=2.69
LT_TARGET_VERSION=2.4.6
FLEX_TARGET_VERSION=2.5.35
#
# When running "make distcheck", use these parallelization flags. Can
# significantly decrease the time required for "make distcheck" because
# that target includes multiple builds of the entire code base.
#
DISTCHECK_MAKE_FLAGS=-j4
#########################################################################
#
# Check command line flags
#
# Default to requiring *exact* versions if we're making distribution
# tarballs; but higher-than-expected versions are ok for
# non-distribution tarballs.
want_ompi=1
autogen_args=
distdir=".."
greekonly=0
nogreek=0
dirty_ok=0
gnu_version_ignore=0
dist_target=distcheck
distcheck_flags="AM_MAKEFLAGS=$DISTCHECK_MAKE_FLAGS"
git_update=1
if test "`basename $0`" = "make_tarball"; then
dist_target=dist
distcheck_flags="AM_MAKEFLAGS=-j32"
highok=1
dirty_ok=1
greekonly=1
else
highok=0
fi
while test "$1" != ""; do
case $1 in
--greekonly) greekonly=1 ;;
--no-greek) nogreek=1 ;;
--highok) highok=1 ;;
--no-ompi) want_ompi=0 ;;
--autogen-args) autogen_args=$2; shift ;;
--distdir) distdir=$2; shift ;;
--dirtyok) dirty_ok=1 ;;
--verok) gnu_version_ignore=1;;
--no-git-update) git_update=0;;
*)
cat <<EOF
Unrecognized argument: $1
Valid arguments:
--greekonly Only build the greek tarball (vs. both tarballs)
--no-greek Do not build the greek tarball
--highok Ok if Autotools versions are too high
--no-ompi Don't build the OMPI or OSHMEM layers
--autogen-args Arguments to pass to autogen
--distdir Move the tarball(s) to this directory when done
--dirtyok Ok if the source tree is dirty
--verok Ignore result of autotools version checking
--no-git-update Skip "git pull" part, assume local repo is updated already
EOF
exit 1
;;
esac
shift
done
#
# First things first -- check that the auto versions that we have are
# the ones that we want.
#
check_gnu_version() {
prog="$1"
target="$2"
ver="`$prog --version | head -n 1 | sed -e's/([^)]*)//g' -e's/[^0-9 .][^ ]* / /g' -e's/ //g'`"
echo $prog version is $ver
ver_major=`echo $ver | cut -d. -f1`
ver_minor=`echo $ver | cut -d. -f2`
ver_release=`echo $ver | cut -d. -f3`
if test "$ver_release" = ""; then
ver_release=0
fi
target_major=`echo $target | cut -d. -f1`
target_minor=`echo $target | cut -d. -f2`
target_release=`echo $target | cut -d. -f3`
if test "$target_release" = ""; then
target_release=0
fi
# Gah -- Libtool released version 2.2.6b, the "b" of which totally
# screws up the -lt and -gt comparisons, below. So strip out any
# trailing letters in the target_release and ver_release variables
# -- if they don't match, we'll just get a "they don't match
# somehow" kind of message (because I'm not going to code up a
# complex/clever alphanumeric lower/higher comparison thingy).
# Sigh.
ver_release=`echo $ver_release | sed 's/[A-Za-z]//g'`
target_release=`echo $target_release | sed 's/[A-Za-z]//g'`
result=same
if test "$ver" != "$target"; then
if test "$ver_major" -lt "$target_major"; then
result=low
elif test "$ver_major" = "$target_major" -a "$ver_minor" -lt "$target_minor"; then
result=low
elif test "$ver_major" = "$target_major" -a "$ver_minor" = "$target_minor" -a "$ver_release" -lt "$target_release"; then
result=low
elif test "$ver_major" -gt "$target_major"; then
result=high
elif test "$ver_major" = "$target_major" -a "$ver_minor" -gt "$target_minor"; then
result=high
elif test "$ver_major" = "$target_major" -a "$ver_minor" = "$target_minor" -a "$ver_release" = "$target_release"; then
result=same
elif test "$ver_major" = "$target_major" -a "$ver_minor" = "$target_minor" -a "$ver_release" -gt "$target_release"; then
result=high
elif test "$ver_major" = "$target_major" -a "$ver_minor" = "$target_minor" -a "$ver_release" -lt "$target_release"; then
result=low
else
result=unknown
fi
fi
if test "$result" = "low"; then
cat <<EOF
----------------------------------------------------------------------
ERROR: Program "$prog" does not have a high enough version:
Found: $ver
Expected: $target
Expected versions:
m4: $M4_TARGET_VERSION
Automake: $AM_TARGET_VERSION
Autoconf: $AC_TARGET_VERSION
Libtool: $LT_TARGET_VERSION
Flex: $FLEX_TARGET_VERSION
Either change this script to match the found version, or install
the correct version of the tools.
----------------------------------------------------------------------
EOF
if test "$gnu_version_ignore" = "0"; then
exit 1
fi
elif test "$result" = "high"; then
if test "$highok" = "0"; then
cat <<EOF
----------------------------------------------------------------------
ERROR: Program "$prog" has a higher version than expected:
Found: $ver
Expected: $target
Expected versions:
m4: $M4_TARGET_VERSION
Automake: $AM_TARGET_VERSION
Autoconf: $AC_TARGET_VERSION
Libtool: $LT_TARGET_VERSION
Flex: $FLEX_TARGET_VERSION
Either change this script to match the found version, or install
the correct version of the tools.
----------------------------------------------------------------------
EOF
if test "$gnu_version_ignore" = "0"; then
exit 1
fi
else
cat <<EOF
----------------------------------------------------------------------
WARNING: Program "$prog" has a higher version than expected:
Found: $ver
Expected: $target
Expected versions:
m4: $M4_TARGET_VERSION
Automake: $AM_TARGET_VERSION
Autoconf: $AC_TARGET_VERSION
Libtool: $LT_TARGET_VERSION
Flex: $FLEX_TARGET_VERSION
This is *usually* ok, but this script is going to sleep for 5 seconds
to give you the chance to quit before doing anything.
----------------------------------------------------------------------
EOF
sleep 5
fi
elif test "$result" = "unknown"; then
cat <<EOF
----------------------------------------------------------------------
ERROR: Program "$prog" does not have the correct version:
Found: $ver
Expected: $target
Expected versions:
m4: $M4_TARGET_VERSION
Automake: $AM_TARGET_VERSION
Autoconf: $AC_TARGET_VERSION
Libtool: $LT_TARGET_VERSION
Flex: $FLEX_TARGET_VERSION
Either change this script to match the found version, or install
the correct version of the tools.
----------------------------------------------------------------------
EOF
if test "$gnu_version_ignore" = "0"; then
exit 1
fi
fi
}
#
# Subroutine to actually make a tarball
#
make_tarball() {
#
# Autogen
#
echo "*** Running autogen $autogen_args..."
rm -f success
if test "$want_ompi" = "1" ; then
(./autogen.pl --force $autogen_args 2>&1 && touch success) | tee auto.out
else
(./autogen.pl --force --no-ompi $autogen_args 2>&1 && touch success) | tee auto.out
fi
if test ! -f success; then
echo "Autogen failed. Aborting"
exit 1
fi
#
# Configure
#
echo "*** Running configure..."
rm -f success
(./configure 2>&1 && touch success) | tee config.out
if test ! -f success; then
echo "Configure failed. Aborting"
exit 1
fi
#
# Remove all generated *_lex.c files so that we ensure to invoke
# flex from here in this script (to ensure that we're using a good
# version of flex, and not picking up random *_lex.c files that
# happened to be in the tree already).
#
echo "*** Removing old generated flex files..."
find . -name \*_lex.c -exec chmod ug+rw {} \; -exec rm -f {} \; -print
#
# make tarball
#
echo "*** Running make $dist_target..."
save_LD=$LD_LIBRARY_PATH
LD_LIBRARY_PATH=
rm -f success
(make $distcheck_flags $dist_target 2>&1 && touch success) | tee dist.out
if test ! -f success; then
echo "Make $dist_target failed. Aborting"
exit 1
fi
rm -f success
LD_LIBRARY_PATH=$save_LD
#
# move
#
echo "*** Moving tarballs..."
mv openmpi-* $distdir
echo "*** All done"
}
#########################################################################
# main
#########################################################################
start=`date`
echo "*** Start time: $start"
echo "*** Checking tools versions..."
check_gnu_version m4 $M4_TARGET_VERSION
check_gnu_version automake $AM_TARGET_VERSION
check_gnu_version autoconf $AC_TARGET_VERSION
check_gnu_version libtool $LT_TARGET_VERSION
# Windows needs a recent version of flex; old versions don't generate
# Windows-friendly *_lex.c files.
check_gnu_version flex $FLEX_TARGET_VERSION
#
# Verify that we're in a top Open MPI dir
#
echo "*** Checking to ensure in top-level Open MPI directory..."
if test -f VERSION -a -f configure.ac -a -f config/opal_get_version.m4 ; then
happy=1
else
echo "Do not appear to be in an Open MPI top directory. Abort!"
exit 1
fi
if test $git_update -eq 1; then
#
# Get the latest
#
echo "*** Git pull to get the latest..."
git pull --rebase
if test $? -ne 0; then
echo "*** Git pull failed. Cannot continue."
exit 1
fi
fi
#
# Ensure we have a clean repo
#
if test $dirty_ok -eq 0; then
echo "*** Checking if source tree is dirty..."
dirty=0
file=git-status.$$.out
git status > $file
if test "`grep 'Changes not staged for commit' $file`" != "" ||
test "`grep 'Changes staged for commit' $file`" != ""; then
dirty=1
fi
rm -f $file
if test $dirty -eq 1; then
echo " Source tree is dirty. Cannot continue."
exit 1
fi
fi
#
# Get our repo_rev
#
echo "*** Removing old VERSION file..."
rm -f VERSION
echo "*** Restoring pristine VERSION file..."
git checkout VERSION
echo "*** Getting git version..."
repo_rev=`git describe --tags --always`
echo " Repo rev number: $repo_rev"
# Sanity checks
if test "$repo_rev" = ""; then
echo "Somehow the repo rev number is empty. Abort!"
exit 1
elif test "`echo $repo_rev | grep ' '`" != ""; then
echo "Somehow the repo rev number has a space in it -- bad!"
exit 1
fi
#
# Set final values in VERSION
#
echo "*** Removing version numbers from VERSION..."
version_files=VERSION
release_date=`date '+%b %d, %Y'`
echo " Release date: $release_date"
for file in $version_files; do
echo " - $file"
sed -e 's/^repo_rev=.*/'repo_rev=$repo_rev/ \
-e "s/^date=.*/date=\"$release_date\"/" \
-e "s/^tarball_version=.*/tarball_version=/" \
$file > $file.new
cp -f $file.new $file
rm $file.new
done
#
# Make 2 tarballs:
#
# - one with the greek
# - one without the greek
#
# unless the user specifically said --greekonly, then only make the
# greek tarball. Making both tarballs at once allows us to guarantee
# to have two tarballs -- one greek and one not -- that have exactly
# the same SVN r number (as opposed to, for example, running this
# script to make a greek tarball, then running it again to make a
# non-greek tarball -- there is a race condition that someone could
# commit in the meantime and change the SVN r number in the 2nd
# tarball)
#
# First, if ! --no-greek, make greek tarball
if test $nogreek -eq 0; then
echo "*** Making greek tarball"
make_tarball
fi
# Now if ! --greekonly, make the non-greek tarball
if test $greekonly -eq 0; then
echo "*** REMOVING ALL GREEK FROM VERSION NUMBERS!!"
for file in $version_files; do
echo " - $file"
sed -e 's/^greek=.*/greek=/' $file > $file.new
cp -f $file.new $file
rm $file.new
done
echo "Making non-greek tarball"
make_tarball
fi
# Put the VERSION file back the way it was
rm -f VERSION
git checkout VERSION
echo " "
echo "*** Start time: $start"
echo "*** Finish time: `date`"
Показать git blame Копировать постоянную ссылку