ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
c7b229f03e
openmpi/ompi/tools/ompi_info/param.c
Jeff Squyres 5f17bc3c2c Make the use of PROTECTED in the mpi_f08 module be optional. 
Add a configure test to see if the Fortran compiler supports the
PROTECTED keyword.  If it does, use in mpi-f08-types.F90 (via a macro
defined in configure-fortran-output-bottom.h).

This is needed to support the PGI 9 Fortran compiler, which does not
support the PROTECTED keyword.

Note that regardless of whether we want to support the PGI 9 Fortran
compiler + mpi_f08, we need to correctly detect whether PROTECTED
works or not, and then use that determination as a criteria for
building the mpi_f08 module.  Previously, mpi-f08-types.F90 used
PROTECTED unconditionally, and we didn't test for it in configure.  So
if a compiler (e.g., PGI 9) supported everything else but didn't
support PROTECTED, it would try to compile the mpi_f08 stuff and choke
on the use of PROTECTED.

Refs trac:4093

This commit was SVN r30273.

The following Trac tickets were found above:
  Ticket 4093 --> https://svn.open-mpi.org/trac/ompi/ticket/4093
2014-01-13 18:35:42 +00:00

636 строки
31 KiB
C
Исходник Ответственный История

/*
* Copyright (c) 2004-2010 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2006 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2007-2014 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2009 Oak Ridge National Labs. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "ompi_config.h"
#include "mpi.h"
#include <string.h>
#include <ctype.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif
#include MCA_timer_IMPLEMENTATION_HEADER
#include "opal/class/opal_value_array.h"
#include "opal/class/opal_pointer_array.h"
#include "opal/util/printf.h"
#include "opal/memoryhooks/memory.h"
#include "opal/runtime/opal_info_support.h"
#include "ompi/tools/ompi_info/ompi_info.h"
#include "ompi/include/mpi_portable_platform.h"
const char *ompi_info_deprecated_value = "deprecated-ompi-info-value";
static void append(char *dest, size_t max, int *first, char *src)
{
size_t len;
if (NULL == src) {
return;
}
len = max - strlen(dest);
if (!(*first)) {
strncat(dest, ", ", len);
len = max - strlen(dest);
}
strncat(dest, src, len);
*first = 0;
}
/*
* do_config
* Accepts:
* - want_all: boolean flag; TRUE -> display all options
* FALSE -> display selected options
*
* This function displays all the options with which the current
* installation of ompi was configured. There are many options here
* that are carried forward from OMPI-7 and are not mca parameters
* in OMPI-10. I have to dig through the invalid options and replace
* them with OMPI-10 options.
*/
void ompi_info_do_config(bool want_all)
{
char *cxx;
char *fortran_mpifh;
char *fortran_usempi;
char *fortran_usempif08;
char *fortran_usempif08_compliance;
char *fortran_have_ignore_tkr;
char *fortran_have_f08_assumed_rank;
char *fortran_build_f08_subarrays;
char *fortran_have_optional_args;
char *fortran_have_bind_c;
char *fortran_have_iso_c_binding;
char *fortran_have_bind_c_sub;
char *fortran_have_bind_c_type;
char *fortran_have_bind_c_type_name;
char *fortran_have_private;
char *fortran_have_protected;
char *fortran_have_abstract;
char *fortran_have_asynchronous;
char *fortran_have_procedure;
char *fortran_08_using_wrappers_for_choice_buffer_functions;
char *java;
char *heterogeneous;
char *memprofile;
char *memdebug;
char *debug;
char *mpi_interface_warning;
char *cprofiling;
char *cxxprofiling;
char *fortran_mpifh_profiling;
char *fortran_usempi_profiling;
char *fortran_usempif08_profiling;
char *cxxexceptions;
char *threads;
char *want_libltdl;
#if OMPI_RTE_ORTE
char *mpirun_prefix_by_default;
#endif
char *sparse_groups;
char *have_mpi_io;
char *wtime_support;
char *symbol_visibility;
char *ft_support;
char *crdebug_support;
char *topology_support;
char *vt_support;
/* Do a little preprocessor trickery here to figure opal_info_out the
* tri-state of MPI_PARAM_CHECK (which will be either 0, 1, or
* ompi_mpi_param_check). The preprocessor will only allow
* comparisons against constants, so you'll get a warning if you
* check MPI_PARAM_CHECK against 0 or 1, but its real value is the
* char *ompi_mpi_param_check. So define ompi_mpi_param_check to
* be a constant, and then all the preprocessor comparisons work
* opal_info_out ok. Note that we chose the preprocessor
* comparison ropal_info_oute because it is not sufficient to
* simply set the variable ompi_mpi_param_check to a non-0/non-1
* value. This is because the compiler will generate a warning
* that that C variable is unused when MPI_PARAM_CHECK is
* hard-coded to 0 or 1.
*/
char *paramcheck;
#define ompi_mpi_param_check 999
#if 0 == MPI_PARAM_CHECK
paramcheck = "never";
#elif 1 == MPI_PARAM_CHECK
paramcheck = "always";
#else
paramcheck = "runtime";
#endif
/* setup the strings that don't require allocations*/
cxx = OMPI_BUILD_CXX_BINDINGS ? "yes" : "no";
if (OMPI_BUILD_FORTRAN_USEMPI_BINDINGS) {
if (OMPI_FORTRAN_HAVE_IGNORE_TKR) {
fortran_usempi = "yes (full: ignore TKR)";
} else {
fortran_usempi = "yes (limited: overloading)";
}
} else {
fortran_usempi = "no";
}
fortran_usempif08 = OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS ? "yes" : "no";
fortran_have_f08_assumed_rank = OMPI_FORTRAN_HAVE_F08_ASSUMED_RANK ?
"yes" : "no";
fortran_build_f08_subarrays = OMPI_BUILD_FORTRAN_F08_SUBARRAYS ?
"yes" : "no";
fortran_have_optional_args = OMPI_FORTRAN_HAVE_OPTIONAL_ARGS ?
"yes" : "no";
fortran_have_bind_c = OMPI_FORTRAN_HAVE_BIND_C ? "yes" : "no";
fortran_have_iso_c_binding = OMPI_FORTRAN_HAVE_ISO_C_BINDING ?
"yes" : "no";
fortran_have_bind_c_sub = OMPI_FORTRAN_HAVE_BIND_C_SUB ? "yes" : "no";
fortran_have_bind_c_type = OMPI_FORTRAN_HAVE_BIND_C_TYPE ? "yes" : "no";
fortran_have_bind_c_type_name = OMPI_FORTRAN_HAVE_BIND_C_TYPE_NAME ?
"yes" : "no";
fortran_have_private = OMPI_FORTRAN_HAVE_PRIVATE ? "yes" : "no";
fortran_have_protected = OMPI_FORTRAN_HAVE_PROTECTED ? "yes" : "no";
fortran_have_abstract = OMPI_FORTRAN_HAVE_ABSTRACT ? "yes" : "no";
fortran_have_asynchronous = OMPI_FORTRAN_HAVE_ASYNCHRONOUS ? "yes" : "no";
fortran_have_procedure = OMPI_FORTRAN_HAVE_PROCEDURE ? "yes" : "no";
fortran_08_using_wrappers_for_choice_buffer_functions =
OMPI_FORTRAN_NEED_WRAPPER_ROUTINES ? "yes" : "no";
/* Build a string describing what level of compliance the mpi_f08
module has */
if (OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) {
/* Do we have everything? (not including PROTECTED, which
isn't *needed* for the mpi_f08 module compliance -- it's
just *nice to have*) */
if (OMPI_BUILD_FORTRAN_F08_SUBARRAYS &&
OMPI_FORTRAN_HAVE_PRIVATE &&
OMPI_FORTRAN_HAVE_ABSTRACT &&
OMPI_FORTRAN_HAVE_ASYNCHRONOUS &&
OMPI_FORTRAN_HAVE_PROCEDURE &&
OMPI_FORTRAN_NEED_WRAPPER_ROUTINES) {
fortran_usempif08_compliance = strdup("The mpi_f08 module is available, and is fully compliant. w00t!");
} else {
char f08[1024];
int first = 1;
snprintf(f08, sizeof(f08),
"The mpi_f08 module is available, but due to limitations in the %s compiler, does not support the following: ",
OMPI_FC);
if (!OMPI_BUILD_FORTRAN_F08_SUBARRAYS) {
append(f08, sizeof(f08), &first, "array subsections");
}
if (!OMPI_FORTRAN_HAVE_PRIVATE) {
append(f08, sizeof(f08), &first, "private MPI_Status members");
}
if (!OMPI_FORTRAN_HAVE_ABSTRACT) {
append(f08, sizeof(f08), &first, "ABSTRACT INTERFACE function pointers");
}
if (!OMPI_FORTRAN_HAVE_ASYNCHRONOUS) {
append(f08, sizeof(f08), &first, "Fortran '08-specified ASYNCHRONOUS behavior");
}
if (!OMPI_FORTRAN_HAVE_PROCEDURE) {
append(f08, sizeof(f08), &first, "PROCEDUREs");
}
if (OMPI_FORTRAN_NEED_WRAPPER_ROUTINES) {
append(f08, sizeof(f08), &first, "direct passthru (where possible) to underlying Open MPI's C functionality");
}
fortran_usempif08_compliance = strdup(f08);
}
} else {
fortran_usempif08_compliance = strdup("The mpi_f08 module was not built");
}
java = OMPI_WANT_JAVA_BINDINGS ? "yes" : "no";
heterogeneous = OPAL_ENABLE_HETEROGENEOUS_SUPPORT ? "yes" : "no";
memprofile = OPAL_ENABLE_MEM_PROFILE ? "yes" : "no";
memdebug = OPAL_ENABLE_MEM_DEBUG ? "yes" : "no";
debug = OPAL_ENABLE_DEBUG ? "yes" : "no";
mpi_interface_warning = OMPI_WANT_MPI_INTERFACE_WARNING ? "yes" : "no";
cprofiling = OMPI_ENABLE_MPI_PROFILING ? "yes" : "no";
cxxprofiling = (OMPI_BUILD_CXX_BINDINGS && OMPI_ENABLE_MPI_PROFILING) ? "yes" : "no";
cxxexceptions = (OMPI_BUILD_CXX_BINDINGS && OMPI_HAVE_CXX_EXCEPTION_SUPPORT) ? "yes" : "no";
fortran_mpifh_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_MPIFH_BINDINGS) ? "yes" : "no";
fortran_usempi_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_USEMPI_BINDINGS) ? "yes" : "no";
fortran_usempif08_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) ? "yes" : "no";
want_libltdl = OPAL_WANT_LIBLTDL ? "yes" : "no";
#if OMPI_RTE_ORTE
mpirun_prefix_by_default = ORTE_WANT_ORTERUN_PREFIX_BY_DEFAULT ? "yes" : "no";
#endif
sparse_groups = OMPI_GROUP_SPARSE ? "yes" : "no";
have_mpi_io = OMPI_PROVIDE_MPI_FILE_INTERFACE ? "yes" : "no";
wtime_support = OPAL_TIMER_USEC_NATIVE ? "native" : "gettimeofday";
symbol_visibility = OPAL_C_HAVE_VISIBILITY ? "yes" : "no";
topology_support = OPAL_HAVE_HWLOC ? "yes" : "no";
vt_support = OMPI_ENABLE_CONTRIB_vt ? "yes" : "no";
/* setup strings that require allocation */
if (OMPI_BUILD_FORTRAN_MPIFH_BINDINGS) {
(void)asprintf(&fortran_mpifh, "yes (%s)",
(OPAL_HAVE_WEAK_SYMBOLS ? "all" :
(OMPI_FORTRAN_CAPS ? "caps" :
(OMPI_FORTRAN_PLAIN ? "lower case" :
(OMPI_FORTRAN_SINGLE_UNDERSCORE ? "single underscore" : "double underscore")))));
} else {
fortran_mpifh = strdup("no");
}
if (OMPI_FORTRAN_HAVE_IGNORE_TKR) {
/* OMPI_FORTRAN_IGNORE_TKR_PREDECL is already in quotes; it
didn't work consistently to put it in _STRINGIFY because
sometimes the compiler would actually interpret the pragma
in there before stringify-ing it. */
(void)asprintf(&fortran_have_ignore_tkr, "yes (%s)",
OMPI_FORTRAN_IGNORE_TKR_PREDECL);
} else {
fortran_have_ignore_tkr = strdup("no");
}
if (OPAL_HAVE_POSIX_THREADS) { /* should just test OPAL_HAVE_THREADS */
#if OMPI_RTE_ORTE
(void)asprintf(&threads, "%s (MPI_THREAD_MULTIPLE: %s, OPAL support: %s, OMPI progress: %s, ORTE progress: yes, Event lib: yes)",
(OPAL_HAVE_POSIX_THREADS ? "posix" : "type unknown"), /* "type unknown" can presumably never happen */
OMPI_ENABLE_THREAD_MULTIPLE ? "yes" : "no",
OPAL_ENABLE_MULTI_THREADS ? "yes" : "no",
OMPI_ENABLE_PROGRESS_THREADS ? "yes" : "no");
#else
(void)asprintf(&threads, "%s (MPI_THREAD_MULTIPLE: %s, OPAL support: %s, OMPI progress: %s, Event lib: yes)",
(OPAL_HAVE_POSIX_THREADS ? "posix" : "type unknown"), /* "type unknown" can presumably never happen */
OMPI_ENABLE_THREAD_MULTIPLE ? "yes" : "no",
OPAL_ENABLE_MULTI_THREADS ? "yes" : "no",
OMPI_ENABLE_PROGRESS_THREADS ? "yes" : "no");
#endif
} else {
threads = strdup("no");
}
(void)asprintf(&ft_support, "%s (checkpoint thread: %s)",
OPAL_ENABLE_FT ? "yes" : "no", OPAL_ENABLE_FT_THREAD ? "yes" : "no");
(void)asprintf(&crdebug_support, "%s",
OPAL_ENABLE_CRDEBUG ? "yes" : "no");
/* output values */
opal_info_out("Configured by", "config:user", OPAL_CONFIGURE_USER);
opal_info_out("Configured on", "config:timestamp", OPAL_CONFIGURE_DATE);
opal_info_out("Configure host", "config:host", OPAL_CONFIGURE_HOST);
opal_info_out("Built by", "build:user", OMPI_BUILD_USER);
opal_info_out("Built on", "build:timestamp", OMPI_BUILD_DATE);
opal_info_out("Built host", "build:host", OMPI_BUILD_HOST);
opal_info_out("C bindings", "bindings:c", "yes");
opal_info_out("C++ bindings", "bindings:cxx", cxx);
opal_info_out("Fort mpif.h", "bindings:mpif.h", fortran_mpifh);
free(fortran_mpifh);
opal_info_out("Fort use mpi", "bindings:use_mpi",
fortran_usempi);
opal_info_out("Fort use mpi size", "bindings:use_mpi:size",
ompi_info_deprecated_value);
opal_info_out("Fort use mpi_f08", "bindings:use_mpi_f08",
fortran_usempif08);
opal_info_out("Fort mpi_f08 compliance", "bindings:use_mpi_f08:compliance",
fortran_usempif08_compliance);
if (NULL != fortran_usempif08_compliance) {
free(fortran_usempif08_compliance);
}
opal_info_out("Fort mpi_f08 subarrays", "bindings:use_mpi_f08:subarrays-supported",
fortran_build_f08_subarrays);
opal_info_out("Java bindings", "bindings:java", java);
opal_info_out("Wrapper compiler rpath", "compiler:all:rpath",
WRAPPER_RPATH_SUPPORT);
opal_info_out("C compiler", "compiler:c:command", OPAL_CC);
opal_info_out("C compiler absolute", "compiler:c:absolute",
OPAL_CC_ABSOLUTE);
opal_info_out("C compiler family name", "compiler:c:familyname",
_STRINGIFY(OPAL_BUILD_PLATFORM_COMPILER_FAMILYNAME));
opal_info_out("C compiler version", "compiler:c:version",
_STRINGIFY(OPAL_BUILD_PLATFORM_COMPILER_VERSION_STR));
if (want_all) {
opal_info_out_int("C char size", "compiler:c:sizeof:char", sizeof(char));
/* JMS: should be fixed in MPI-2.2 to differentiate between C
_Bool and C++ bool. For the moment, the code base assumes
that they are the same. Because of opal_config_bottom.h,
we can sizeof(bool) here, so we might as well -- even
though this technically isn't right. This should be fixed
when we update to MPI-2.2. See below for note about C++
bool alignment. */
opal_info_out_int("C bool size", "compiler:c:sizeof:bool", sizeof(bool));
opal_info_out_int("C short size", "compiler:c:sizeof:short", sizeof(short));
opal_info_out_int("C int size", "compiler:c:sizeof:int", sizeof(int));
opal_info_out_int("C long size", "compiler:c:sizeof:long", sizeof(long));
opal_info_out_int("C float size", "compiler:c:sizeof:float", sizeof(float));
opal_info_out_int("C double size", "compiler:c:sizeof:double", sizeof(double));
opal_info_out_int("C pointer size", "compiler:c:sizeof:pointer", sizeof(void *));
opal_info_out_int("C char align", "compiler:c:align:char", OPAL_ALIGNMENT_CHAR);
#if OMPI_BUILD_CXX_BINDINGS
/* JMS: See above for note about C++ bool size. We don't have
the bool alignment the way configure currently runs -- need
to clean this up when we update for MPI-2.2. */
opal_info_out_int("C bool align", "compiler:c:align:bool", OPAL_ALIGNMENT_CXX_BOOL);
#else
opal_info_out("C bool align", "compiler:c:align:bool", "skipped");
#endif
opal_info_out_int("C int align", "compiler:c:align:int", OPAL_ALIGNMENT_INT);
opal_info_out_int("C float align", "compiler:c:align:float", OPAL_ALIGNMENT_FLOAT);
opal_info_out_int("C double align", "compiler:c:align:double", OPAL_ALIGNMENT_DOUBLE);
}
opal_info_out("C++ compiler", "compiler:cxx:command", OMPI_CXX);
opal_info_out("C++ compiler absolute", "compiler:cxx:absolute", OMPI_CXX_ABSOLUTE);
opal_info_out("Fort compiler", "compiler:fortran:command", OMPI_FC);
opal_info_out("Fort compiler abs", "compiler:fortran:absolute",
OMPI_FC_ABSOLUTE);
opal_info_out("Fort ignore TKR", "compiler:fortran:ignore_tkr",
fortran_have_ignore_tkr);
free(fortran_have_ignore_tkr);
opal_info_out("Fort 08 assumed shape",
"compiler:fortran:f08_assumed_rank",
fortran_have_f08_assumed_rank);
opal_info_out("Fort optional args",
"compiler:fortran:optional_arguments",
fortran_have_optional_args);
opal_info_out("Fort BIND(C) (all)",
"compiler:fortran:bind_c",
fortran_have_bind_c);
opal_info_out("Fort ISO_C_BINDING",
"compiler:fortran:iso_c_binding",
fortran_have_iso_c_binding);
opal_info_out("Fort SUBROUTINE BIND(C)",
"compiler:fortran:subroutine_bind_c",
fortran_have_bind_c_sub);
opal_info_out("Fort TYPE,BIND(C)",
"compiler:fortran:type_bind_c",
fortran_have_bind_c_type);
opal_info_out("Fort T,BIND(C,name=\"a\")",
"compiler:fortran:type_name_bind_c",
fortran_have_bind_c_type_name);
opal_info_out("Fort PRIVATE",
"compiler:fortran:private",
fortran_have_private);
opal_info_out("Fort PROTECTED",
"compiler:fortran:protected",
fortran_have_protected);
opal_info_out("Fort ABSTRACT",
"compiler:fortran:abstract",
fortran_have_abstract);
opal_info_out("Fort ASYNCHRONOUS",
"compiler:fortran:asynchronous",
fortran_have_asynchronous);
opal_info_out("Fort PROCEDURE",
"compiler:fortran:procedure",
fortran_have_procedure);
opal_info_out("Fort f08 using wrappers",
"compiler:fortran:08_wrappers",
fortran_08_using_wrappers_for_choice_buffer_functions);
if (want_all) {
/* Will always have the size of Fortran integer */
opal_info_out_int("Fort integer size", "compiler:fortran:sizeof:integer",
OMPI_SIZEOF_FORTRAN_INTEGER);
opal_info_out_int("Fort logical size", "compiler:fortran:sizeof:logical",
OMPI_SIZEOF_FORTRAN_LOGICAL);
opal_info_out_int("Fort logical value true", "compiler:fortran:value:true",
OMPI_FORTRAN_VALUE_TRUE);
/* May or may not have the other Fortran sizes */
if (OMPI_BUILD_FORTRAN_MPIFH_BINDINGS ||
OMPI_BUILD_FORTRAN_USEMPI_BINDINGS ||
OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) {
opal_info_out("Fort have integer1", "compiler:fortran:have:integer1",
OMPI_HAVE_FORTRAN_INTEGER1 ? "yes" : "no");
opal_info_out("Fort have integer2", "compiler:fortran:have:integer2",
OMPI_HAVE_FORTRAN_INTEGER2 ? "yes" : "no");
opal_info_out("Fort have integer4", "compiler:fortran:have:integer4",
OMPI_HAVE_FORTRAN_INTEGER4 ? "yes" : "no");
opal_info_out("Fort have integer8", "compiler:fortran:have:integer8",
OMPI_HAVE_FORTRAN_INTEGER8 ? "yes" : "no");
opal_info_out("Fort have integer16", "compiler:fortran:have:integer16",
OMPI_HAVE_FORTRAN_INTEGER16 ? "yes" : "no");
opal_info_out("Fort have real4", "compiler:fortran:have:real4",
OMPI_HAVE_FORTRAN_REAL4 ? "yes" : "no");
opal_info_out("Fort have real8", "compiler:fortran:have:real8",
OMPI_HAVE_FORTRAN_REAL8 ? "yes" : "no");
opal_info_out("Fort have real16", "compiler:fortran:have:real16",
OMPI_HAVE_FORTRAN_REAL16 && OMPI_REAL16_MATCHES_C ? "yes" : "no");
opal_info_out("Fort have complex8", "compiler:fortran:have:complex8",
OMPI_HAVE_FORTRAN_COMPLEX8 ? "yes" : "no");
opal_info_out("Fort have complex16", "compiler:fortran:have:complex16",
OMPI_HAVE_FORTRAN_COMPLEX16 ? "yes" : "no");
opal_info_out("Fort have complex32", "compiler:fortran:have:complex32",
OMPI_HAVE_FORTRAN_COMPLEX32 && OMPI_REAL16_MATCHES_C ? "yes" : "no");
opal_info_out_int("Fort integer1 size", "compiler:fortran:sizeof:integer1",
OMPI_HAVE_FORTRAN_INTEGER1 ? OMPI_SIZEOF_FORTRAN_INTEGER1 : -1);
opal_info_out_int("Fort integer2 size", "compiler:fortran:sizeof:integer2",
OMPI_HAVE_FORTRAN_INTEGER2 ? OMPI_SIZEOF_FORTRAN_INTEGER2 : -1);
opal_info_out_int("Fort integer4 size", "compiler:fortran:sizeof:integer4",
OMPI_HAVE_FORTRAN_INTEGER4 ? OMPI_SIZEOF_FORTRAN_INTEGER4 : -1);
opal_info_out_int("Fort integer8 size", "compiler:fortran:sizeof:integer8",
OMPI_HAVE_FORTRAN_INTEGER8 ? OMPI_SIZEOF_FORTRAN_INTEGER8 : -1);
opal_info_out_int("Fort integer16 size", "compiler:fortran:sizeof:integer16",
OMPI_HAVE_FORTRAN_INTEGER16 ? OMPI_SIZEOF_FORTRAN_INTEGER16 : -1);
opal_info_out_int("Fort real size", "compiler:fortran:sizeof:real",
OMPI_SIZEOF_FORTRAN_REAL);
opal_info_out_int("Fort real4 size", "compiler:fortran:sizeof:real4",
OMPI_HAVE_FORTRAN_REAL4 ? OMPI_SIZEOF_FORTRAN_REAL4 : -1);
opal_info_out_int("Fort real8 size", "compiler:fortran:sizeof:real8",
OMPI_HAVE_FORTRAN_REAL8 ? OMPI_SIZEOF_FORTRAN_REAL8 : -1);
opal_info_out_int("Fort real16 size", "compiler:fortran:sizeof:real17",
OMPI_HAVE_FORTRAN_REAL16 ? OMPI_SIZEOF_FORTRAN_REAL16 : -1);
opal_info_out_int("Fort dbl prec size",
"compiler:fortran:sizeof:double_precision",
OMPI_SIZEOF_FORTRAN_DOUBLE_PRECISION);
opal_info_out_int("Fort cplx size", "compiler:fortran:sizeof:complex",
OMPI_SIZEOF_FORTRAN_COMPLEX);
opal_info_out_int("Fort dbl cplx size",
"compiler:fortran:sizeof:double_complex",
OMPI_HAVE_FORTRAN_DOUBLE_COMPLEX ? OMPI_SIZEOF_FORTRAN_DOUBLE_COMPLEX : -1);
opal_info_out_int("Fort cplx8 size", "compiler:fortran:sizeof:complex8",
OMPI_HAVE_FORTRAN_COMPLEX8 ? OMPI_SIZEOF_FORTRAN_COMPLEX8 : -1);
opal_info_out_int("Fort cplx16 size", "compiler:fortran:sizeof:complex16",
OMPI_HAVE_FORTRAN_COMPLEX16 ? OMPI_SIZEOF_FORTRAN_COMPLEX16 : -1);
opal_info_out_int("Fort cplx32 size", "compiler:fortran:sizeof:complex32",
OMPI_HAVE_FORTRAN_COMPLEX32 ? OMPI_SIZEOF_FORTRAN_COMPLEX32 : -1);
opal_info_out_int("Fort integer align", "compiler:fortran:align:integer",
OMPI_ALIGNMENT_FORTRAN_INTEGER);
opal_info_out_int("Fort integer1 align", "compiler:fortran:align:integer1",
OMPI_HAVE_FORTRAN_INTEGER1 ? OMPI_ALIGNMENT_FORTRAN_INTEGER1 : -1);
opal_info_out_int("Fort integer2 align", "compiler:fortran:align:integer2",
OMPI_HAVE_FORTRAN_INTEGER2 ? OMPI_ALIGNMENT_FORTRAN_INTEGER2 : -1);
opal_info_out_int("Fort integer4 align", "compiler:fortran:align:integer4",
OMPI_HAVE_FORTRAN_INTEGER4 ? OMPI_ALIGNMENT_FORTRAN_INTEGER4 : -1);
opal_info_out_int("Fort integer8 align", "compiler:fortran:align:integer8",
OMPI_HAVE_FORTRAN_INTEGER8 ? OMPI_ALIGNMENT_FORTRAN_INTEGER8 : -1);
opal_info_out_int("Fort integer16 align", "compiler:fortran:align:integer16",
OMPI_HAVE_FORTRAN_INTEGER16 ? OMPI_ALIGNMENT_FORTRAN_INTEGER16 : -1);
opal_info_out_int("Fort real align", "compiler:fortran:align:real",
OMPI_ALIGNMENT_FORTRAN_REAL);
opal_info_out_int("Fort real4 align", "compiler:fortran:align:real4",
OMPI_HAVE_FORTRAN_REAL4 ? OMPI_ALIGNMENT_FORTRAN_REAL4 : -1);
opal_info_out_int("Fort real8 align", "compiler:fortran:align:real8",
OMPI_HAVE_FORTRAN_REAL8 ? OMPI_ALIGNMENT_FORTRAN_REAL8 : -1);
opal_info_out_int("Fort real16 align", "compiler:fortran:align:real16",
OMPI_HAVE_FORTRAN_REAL16 ? OMPI_ALIGNMENT_FORTRAN_REAL16 : -1);
opal_info_out_int("Fort dbl prec align",
"compiler:fortran:align:double_precision",
OMPI_ALIGNMENT_FORTRAN_DOUBLE_PRECISION);
opal_info_out_int("Fort cplx align", "compiler:fortran:align:complex",
OMPI_ALIGNMENT_FORTRAN_COMPLEX);
opal_info_out_int("Fort dbl cplx align",
"compiler:fortran:align:double_complex",
OMPI_HAVE_FORTRAN_DOUBLE_COMPLEX ? OMPI_ALIGNMENT_FORTRAN_DOUBLE_COMPLEX : -1);
opal_info_out_int("Fort cplx8 align", "compiler:fortran:align:complex8",
OMPI_HAVE_FORTRAN_COMPLEX8 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX8 : -1);
opal_info_out_int("Fort cplx16 align", "compiler:fortran:align:complex16",
OMPI_HAVE_FORTRAN_COMPLEX16 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX16 : -1);
opal_info_out_int("Fort cplx32 align", "compiler:fortran:align:complex32",
OMPI_HAVE_FORTRAN_COMPLEX32 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX32 : -1);
} else {
opal_info_out("Fort real size", "compiler:fortran:sizeof:real", "skipped");
opal_info_out("Fort dbl prec size",
"compiler:fortran:sizeof:double_precision", "skipped");
opal_info_out("Fort cplx size", "compiler:fortran:sizeof:complex", "skipped");
opal_info_out("Fort dbl cplx size",
"compiler:fortran:sizeof:double_complex", "skipped");
opal_info_out("Fort integer align", "compiler:fortran:align:integer", "skipped");
opal_info_out("Fort real align", "compiler:fortran:align:real", "skipped");
opal_info_out("Fort dbl prec align",
"compiler:fortran:align:double_precision","skipped");
opal_info_out("Fort cplx align", "compiler:fortran:align:complex", "skipped");
opal_info_out("Fort dbl cplx align",
"compiler:fortran:align:double_complex", "skipped");
}
}
opal_info_out("C profiling", "option:profiling:c", cprofiling);
opal_info_out("C++ profiling", "option:profiling:cxx", cxxprofiling);
opal_info_out("Fort mpif.h profiling", "option:profiling:mpif.h",
fortran_mpifh_profiling);
opal_info_out("Fort use mpi profiling", "option:profiling:use_mpi",
fortran_usempi_profiling);
opal_info_out("Fort use mpi_f08 prof",
"option:profiling:use_mpi_f08",
fortran_usempif08_profiling);
opal_info_out("C++ exceptions", "option:cxx_exceptions", cxxexceptions);
opal_info_out("Thread support", "option:threads", threads);
free(threads);
opal_info_out("Sparse Groups", "option:sparse:groups", sparse_groups);
if (want_all) {
/* Don't display the build CPPFLAGS or CXXCPPFLAGS because they're
* just -I$(top_srcdir)/include, etc. Hence, they're a) boring,
* and c) specific for ompi_info.
*/
opal_info_out("Build CFLAGS", "option:build:cflags", OMPI_BUILD_CFLAGS);
opal_info_out("Build CXXFLAGS", "option:build:cxxflags", OMPI_BUILD_CXXFLAGS);
opal_info_out("Build FCFLAGS", "option:build:fcflags", OMPI_BUILD_FCFLAGS);
opal_info_out("Build LDFLAGS", "option:build:ldflags", OMPI_BUILD_LDFLAGS);
opal_info_out("Build LIBS", "option:build:libs", OMPI_BUILD_LIBS);
opal_info_out("Wrapper extra CFLAGS", "option:wrapper:extra_cflags",
WRAPPER_EXTRA_CFLAGS);
opal_info_out("Wrapper extra CXXFLAGS", "option:wrapper:extra_cxxflags",
WRAPPER_EXTRA_CXXFLAGS);
opal_info_out("Wrapper extra FCFLAGS", "option:wrapper:extra_fcflags",
WRAPPER_EXTRA_FCFLAGS);
opal_info_out("Wrapper extra LDFLAGS", "option:wrapper:extra_ldflags",
WRAPPER_EXTRA_LDFLAGS);
opal_info_out("Wrapper extra LIBS", "option:wrapper:extra_libs",
WRAPPER_EXTRA_LIBS);
}
opal_info_out("Internal debug support", "option:debug", debug);
opal_info_out("MPI interface warnings", "option:mpi-interface-warning", mpi_interface_warning);
opal_info_out("MPI parameter check", "option:mpi-param-check", paramcheck);
opal_info_out("Memory profiling support", "option:mem-profile", memprofile);
opal_info_out("Memory debugging support", "option:mem-debug", memdebug);
opal_info_out("libltdl support", "option:dlopen", want_libltdl);
opal_info_out("Heterogeneous support", "options:heterogeneous", heterogeneous);
#if OMPI_RTE_ORTE
opal_info_out("mpirun default --prefix", "mpirun:prefix_by_default",
mpirun_prefix_by_default);
#endif
opal_info_out("MPI I/O support", "options:mpi-io", have_mpi_io);
opal_info_out("MPI_WTIME support", "options:mpi-wtime", wtime_support);
opal_info_out("Symbol vis. support", "options:visibility", symbol_visibility);
opal_info_out("Host topology support", "options:host-topology",
topology_support);
opal_info_out("MPI extensions", "options:mpi_ext", OMPI_MPIEXT_COMPONENTS);
opal_info_out("FT Checkpoint support", "options:ft_support", ft_support);
free(ft_support);
opal_info_out("C/R Enabled Debugging", "options:crdebug_support", crdebug_support);
free(crdebug_support);
opal_info_out("VampirTrace support", "options:vt", vt_support);
opal_info_out_int("MPI_MAX_PROCESSOR_NAME", "options:mpi-max-processor-name",
MPI_MAX_PROCESSOR_NAME);
opal_info_out_int("MPI_MAX_ERROR_STRING", "options:mpi-max-error-string",
MPI_MAX_ERROR_STRING);
opal_info_out_int("MPI_MAX_OBJECT_NAME", "options:mpi-max-object-name",
MPI_MAX_OBJECT_NAME);
opal_info_out_int("MPI_MAX_INFO_KEY", "options:mpi-max-info-key",
MPI_MAX_INFO_KEY);
opal_info_out_int("MPI_MAX_INFO_VAL", "options:mpi-max-info-val",
MPI_MAX_INFO_VAL);
opal_info_out_int("MPI_MAX_PORT_NAME", "options:mpi-max-port-name",
MPI_MAX_PORT_NAME);
#if OMPI_PROVIDE_MPI_FILE_INTERFACE
opal_info_out_int("MPI_MAX_DATAREP_STRING", "options:mpi-max-datarep-string",
MPI_MAX_DATAREP_STRING);
#else
opal_info_out("MPI_MAX_DATAREP_STRING", "options:mpi-max-datarep-string",
"IO interface not provided");
#endif
}
Показать git blame Копировать постоянную ссылку