ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
openmpi/ompi/mca/btl/usnic/btl_usnic_recv.c
Dave Goodell c5a7e8a079 usnic: stomp format specifier warnings 
The usnic BTL now builds cleanly under `--enable-picky` when `MSGDEBUG1`
is set.

Reviewed-by: jsquyres

cmr=v1.7.4:reviewer=jsquyres

This commit was SVN r29097.
2013-08-29 23:24:14 +00:00

583 строки
21 KiB
C
Исходник Ответственный История

/*
* Copyright (c) 2004-2008 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2011 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2006 Sandia National Laboratories. All rights
* reserved.
* Copyright (c) 2008-2013 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2012 Los Alamos National Security, LLC. All rights
* reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "ompi_config.h"
#include <infiniband/verbs.h>
#include <unistd.h>
#include "opal_stdint.h"
#include "opal/mca/memchecker/base/base.h"
#include "ompi/constants.h"
#include "ompi/mca/btl/btl.h"
#include "ompi/mca/btl/base/base.h"
#include "ompi/mca/common/verbs/common_verbs.h"
#include "btl_usnic.h"
#include "btl_usnic_frag.h"
#include "btl_usnic_endpoint.h"
#include "btl_usnic_module.h"
#include "btl_usnic_proc.h"
#include "btl_usnic_ack.h"
#include "btl_usnic_recv.h"
#include "btl_usnic_util.h"
/*
* Given an incoming segment, lookup the endpoint that sent it
*/
static inline ompi_btl_usnic_endpoint_t *
lookup_sender(ompi_btl_usnic_module_t *module, ompi_btl_usnic_segment_t *seg)
{
int ret;
ompi_btl_usnic_endpoint_t *sender;
/* Use the hashed RTE process name in the BTL header to uniquely
identify the sending process (using the MAC/hardware address
only identifies the sending server -- not the sending RTE
process). */
/* JMS We've experimented with using a handshake before sending
any data so that instead of looking up a hash on the
btl_header->sender, echo back the ptr to the sender's
ompi_proc. There was limited speedup with this scheme; more
investigation is required. */
ret = opal_hash_table_get_value_uint64(&module->senders,
seg->us_btl_header->sender,
(void**) &sender);
if (OPAL_LIKELY(OPAL_SUCCESS == ret)) {
return sender;
}
/* The sender wasn't in the hash table, so do a slow lookup and
put the result in the hash table */
sender = ompi_btl_usnic_proc_lookup_endpoint(module,
seg->us_btl_header->sender);
if (NULL != sender) {
opal_hash_table_set_value_uint64(&module->senders,
seg->us_btl_header->sender, sender);
return sender;
}
/* Whoa -- not found at all! */
return NULL;
}
static inline int
ompi_btl_usnic_check_rx_seq(
ompi_btl_usnic_endpoint_t *endpoint,
ompi_btl_usnic_recv_segment_t *seg,
uint32_t *window_index)
{
uint32_t i;
ompi_btl_usnic_seq_t seq;
/*
* Handle piggy-backed ACK if present
*/
if (seg->rs_base.us_btl_header->ack_seq != 0) {
#if MSGDEBUG1
opal_output(0, "Handle piggy-packed ACK seq %"UDSEQ"\n", seg->rs_base.us_btl_header->ack_seq);
#endif
ompi_btl_usnic_handle_ack(endpoint,
seg->rs_base.us_btl_header->ack_seq);
}
/* Do we have room in the endpoint's receiver window?
Receiver window:
|-------- WINDOW_SIZE ----------|
+---------------------------------+
| highest_seq_rcvd |
| somewhere in this range |
+^--------------------------------+
|
+-- next_contig_seq_to_recv: the window left edge;
will always be less than highest_seq_rcvd
The good condition is
next_contig_seq_to_recv <= seq < next_contig_seq_to_recv + WINDOW_SIZE
And the bad condition is
seq < next_contig_seq_to_recv
or
seq >= next_contig_seg_to_recv + WINDOW_SIZE
*/
seq = seg->rs_base.us_btl_header->seq;
if (seq < endpoint->endpoint_next_contig_seq_to_recv ||
seq >= endpoint->endpoint_next_contig_seq_to_recv + WINDOW_SIZE) {
#if MSGDEBUG
opal_output(0, "<-- Received FRAG/CHUNK ep %p, seq %" UDSEQ " outside of window (%" UDSEQ " - %" UDSEQ "), %p, module %p -- DROPPED\n",
(void*)endpoint, seg->rs_base.us_btl_header->seq,
endpoint->endpoint_next_contig_seq_to_recv,
(endpoint->endpoint_next_contig_seq_to_recv +
WINDOW_SIZE - 1),
(void*) seg,
(void*) endpoint->endpoint_module);
#endif
/* Stats */
if (seq < endpoint->endpoint_next_contig_seq_to_recv) {
++endpoint->endpoint_module->num_oow_low_recvs;
} else {
++endpoint->endpoint_module->num_oow_high_recvs;
}
goto dup_needs_ack;
}
/* Ok, this segment is within the receiver window. Have we
already received it? It's possible that the sender has
re-sent a segment that we've already received (but not yet
ACKed).
We have saved all un-ACKed segment in an array on the
endpoint that is the same legnth as the receiver's window
(i.e., WINDOW_SIZE). We can use the incoming segment sequence
number to find its position in the array. It's a little
tricky because the left edge of the receiver window keeps
moving, so we use a starting reference point in the array
that is updated when we sent ACKs (and therefore move the
left edge of the receiver's window).
So this segment's index into the endpoint array is:
rel_posn_in_recv_win = seq - next_contig_seq_to_recv
array_posn = (rel_posn_in_recv_win + rfstart) % WINDOW_SIZE
rfstart is then updated when we send ACKs:
rfstart = (rfstart + num_acks_sent) % WINDOW_SIZE
*/
i = seq - endpoint->endpoint_next_contig_seq_to_recv;
i = WINDOW_SIZE_MOD(i + endpoint->endpoint_rfstart);
if (endpoint->endpoint_rcvd_segs[i]) {
#if MSGDEBUG
opal_output(0, "<-- Received FRAG/CHUNK ep %p, seq %" UDSEQ " from %s to %s, seg %p: duplicate -- DROPPED\n",
(void*) endpoint, bseg->us_btl_header->seq, src_mac, dest_mac,
(void*) seg);
#endif
/* highest_seq_rcvd is for debug stats only; it's not used
in any window calculations */
assert(seq <= endpoint->endpoint_highest_seq_rcvd);
/* next_contig_seq_to_recv-1 is the ack number we'll
send */
assert (seq > endpoint->endpoint_next_contig_seq_to_recv - 1);
/* Stats */
++endpoint->endpoint_module->num_dup_recvs;
goto dup_needs_ack;
}
/* Stats: is this the highest sequence number we've received? */
if (seq > endpoint->endpoint_highest_seq_rcvd) {
endpoint->endpoint_highest_seq_rcvd = seq;
}
*window_index = i;
return true;
dup_needs_ack:
if (!endpoint->endpoint_ack_needed) {
ompi_btl_usnic_add_to_endpoints_needing_ack(endpoint);
}
return false;
}
/*
* Packet has been fully processed, update the receive window
* to indicate that it and possible following contiguous sequence
* numbers have been received.
*/
static inline void
ompi_btl_usnic_update_window(
ompi_btl_usnic_endpoint_t *endpoint,
uint32_t window_index)
{
uint32_t i;
/* Enable ACK reply if not enabled */
#if MSGDEBUG1
opal_output(0, "ep: %p, ack_needed = %s\n", (void*)endpoint, endpoint->endpoint_ack_needed?"true":"false");
#endif
if (!endpoint->endpoint_ack_needed) {
ompi_btl_usnic_add_to_endpoints_needing_ack(endpoint);
}
/* give this process a chance to send something before ACKing */
if (0 == endpoint->endpoint_acktime) {
endpoint->endpoint_acktime = get_nsec() + 50000; /* 50 usec */
}
/* Save this incoming segment in the received segmentss array on the
endpoint. */
/* JMS Another optimization: make rcvd_segs be a bitmask (i.e.,
more cache friendly) */
endpoint->endpoint_rcvd_segs[window_index] = true;
/* See if the leftmost segment in the receiver window is
occupied. If so, advance the window. Repeat until we hit
an unoccupied position in the window. */
i = endpoint->endpoint_rfstart;
while (endpoint->endpoint_rcvd_segs[i]) {
endpoint->endpoint_rcvd_segs[i] = false;
endpoint->endpoint_next_contig_seq_to_recv++;
i = WINDOW_SIZE_MOD(i + 1);
#if MSGDEBUG
opal_output(0, "Advance window to %d; next seq to send %" UDSEQ, i,
endpoint->endpoint_next_contig_seq_to_recv);
#endif
}
endpoint->endpoint_rfstart = i;
}
/*
* We have received a segment, take action based on the
* packet type in the BTL header
*/
void ompi_btl_usnic_recv(ompi_btl_usnic_module_t *module,
ompi_btl_usnic_recv_segment_t *seg,
struct ibv_recv_wr **repost_recv_head)
{
ompi_btl_usnic_segment_t *bseg;
mca_btl_active_message_callback_t* reg;
ompi_btl_usnic_endpoint_t *endpoint;
ompi_btl_usnic_btl_chunk_header_t *chunk_hdr;
uint32_t window_index;
#if MSGDEBUG1
char src_mac[32];
char dest_mac[32];
#endif
bseg = &seg->rs_base;
++module->num_total_recvs;
/* Valgrind help */
opal_memchecker_base_mem_defined((void*)(seg->rs_recv_desc.sg_list[0].addr),
seg->rs_recv_desc.sg_list[0].length);
#if MSGDEBUG1
memset(src_mac, 0, sizeof(src_mac));
memset(dest_mac, 0, sizeof(dest_mac));
ompi_btl_usnic_sprintf_gid_mac(src_mac,
&seg->rs_protocol_header->grh.sgid);
ompi_btl_usnic_sprintf_gid_mac(dest_mac,
&seg->rs_protocol_header->grh.dgid);
#if MSGDEBUG
opal_output(0, "Got message from MAC %s", src_mac);
opal_output(0, "Looking for sender: 0x%016lx",
bseg->us_btl_header->sender);
#endif
#endif
/* Find out who sent this segment */
endpoint = lookup_sender(module, bseg);
seg->rs_endpoint = endpoint;
if (FAKE_RECV_FRAG_DROP || OPAL_UNLIKELY(NULL == endpoint)) {
/* No idea who this was from, so drop it */
#if MSGDEBUG1
opal_output(0, "=== Unknown sender; dropped: from MAC %s to MAC %s, seq %" UDSEQ,
src_mac,
dest_mac,
bseg->us_btl_header->seq);
#endif
++module->num_unk_recvs;
goto repost_no_endpoint;
}
/***********************************************************************/
/* Segment is an incoming frag */
if (OMPI_BTL_USNIC_PAYLOAD_TYPE_FRAG == bseg->us_btl_header->payload_type) {
/* Is incoming sequence # ok? */
if (!ompi_btl_usnic_check_rx_seq(endpoint, seg, &window_index)) {
goto repost;
}
#if MSGDEBUG1
opal_output(0, "<-- Received FRAG ep %p, seq %" UDSEQ ", len=%d\n",
(void*) endpoint,
seg->rs_base.us_btl_header->seq,
seg->rs_base.us_btl_header->payload_len);
#if 0
opal_output(0, "<-- Received FRAG ep %p, seq %" UDSEQ " from %s to %s: GOOD! (rel seq %d, lowest seq %" UDSEQ ", highest seq: %" UDSEQ ", rwstart %d) seg %p, module %p\n",
(void*) endpoint,
seg->rs_base.us_btl_header->seq,
src_mac, dest_mac,
window_index,
endpoint->endpoint_next_contig_seq_to_recv,
endpoint->endpoint_highest_seq_rcvd,
endpoint->endpoint_rfstart,
(void*) seg, (void*) module);
if (seg->rs_base.us_btl_header->put_addr != NULL) {
opal_output(0, " put_addr = %p\n",
seg->rs_base.us_btl_header->put_addr);
}
#endif
#endif
/*
* update window before callback because callback might
* generate a send, and we'd like to piggy-back ACK if possible
*/
ompi_btl_usnic_update_window(endpoint, window_index);
/* Stats */
++module->num_frag_recvs;
/* If this it not a PUT, Pass this segment up to the PML.
* Be sure to get the payload length from the BTL header because
* the L2 layer may artificially inflate (or otherwise change)
* the frame length to meet minimum sizes, add protocol information,
* etc.
*/
if (seg->rs_base.us_btl_header->put_addr == NULL) {
reg = mca_btl_base_active_message_trigger +
bseg->us_payload.pml_header->tag;
seg->rs_segment.seg_len = bseg->us_btl_header->payload_len;
reg->cbfunc(&module->super, bseg->us_payload.pml_header->tag,
&seg->rs_desc, reg->cbdata);
/*
* If this is a PUT, need to copy it to user buffer
*/
} else {
#if MSGDEBUG1
opal_output(0, "Copy %d PUT bytes to %p\n",
seg->rs_base.us_btl_header->payload_len,
(void*)seg->rs_base.us_btl_header->put_addr);
#endif
memcpy(seg->rs_base.us_btl_header->put_addr,
seg->rs_base.us_payload.raw,
seg->rs_base.us_btl_header->payload_len);
}
goto repost;
}
/***********************************************************************/
/* Segment is an incoming chunk */
if (OMPI_BTL_USNIC_PAYLOAD_TYPE_CHUNK == bseg->us_btl_header->payload_type) {
int frag_index;
ompi_btl_usnic_rx_frag_info_t *fip;
/* Is incoming sequence # ok? */
if (!ompi_btl_usnic_check_rx_seq(endpoint, seg, &window_index)) {
goto repost;
}
#if MSGDEBUG1
opal_output(0, "<-- Received CHUNK fid %d ep %p, seq %" UDSEQ " from %s to %s: GOOD! (rel seq %d, lowest seq %" UDSEQ ", highest seq: %" UDSEQ ", rwstart %d) seg %p, module %p\n",
seg->rs_base.us_btl_chunk_header->ch_frag_id,
(void*) endpoint,
seg->rs_base.us_btl_chunk_header->ch_hdr.seq,
src_mac, dest_mac,
window_index,
endpoint->endpoint_next_contig_seq_to_recv,
endpoint->endpoint_highest_seq_rcvd,
endpoint->endpoint_rfstart,
(void*) seg, (void*) module);
#endif
/* start a new fragment if not one in progress
* alloc memory, etc. when last byte arrives, dealloc the
* frag_id and pass data to PML
*/
chunk_hdr = seg->rs_base.us_btl_chunk_header;
frag_index = chunk_hdr->ch_frag_id % MAX_ACTIVE_FRAGS;
fip = &(endpoint->endpoint_rx_frag_info[frag_index]);
/* frag_id == 0 means this slot it empty, grab it! */
if (0 == fip->rfi_frag_id) {
fip->rfi_frag_id = chunk_hdr->ch_frag_id;
fip->rfi_frag_size = chunk_hdr->ch_frag_size;
if (chunk_hdr->ch_hdr.put_addr == NULL) {
int pool;
fip->rfi_data = NULL;
/* See which data pool this should come from,
* or if it should be malloc()ed
*/
pool = fls(chunk_hdr->ch_frag_size-1);
if (pool >= module->first_pool &&
pool <= module->last_pool) {
ompi_free_list_item_t* item;
OMPI_FREE_LIST_GET_MT(&module->module_recv_buffers[pool],
item);
if (OPAL_LIKELY(NULL != item)) {
fip->rfi_data = (char *)item;
fip->rfi_data_pool = pool;
}
}
if (fip->rfi_data == NULL) {
fip->rfi_data = malloc(chunk_hdr->ch_frag_size);
fip->rfi_data_pool = 0;
}
if (fip->rfi_data == NULL) {
abort();
}
#if MSGDEBUG2
opal_output(0, "Start large recv to %p, size=%d\n",
fip->rfi_data, chunk_hdr->ch_frag_size);
#endif
} else {
#if MSGDEBUG2
opal_output(0, "Start PUT to %p\n", chunk_hdr->ch_hdr.put_addr);
#endif
fip->rfi_data = chunk_hdr->ch_hdr.put_addr;
}
fip->rfi_bytes_left = chunk_hdr->ch_frag_size;
fip->rfi_frag_id = chunk_hdr->ch_frag_id;
/* frag_id is not 0 - it must match, drop if not */
} else if (fip->rfi_frag_id != chunk_hdr->ch_frag_id) {
++module->num_badfrag_recvs;
goto repost;
}
#if MSGDEBUG1
opal_output(0, "put_addr=%p, copy_addr=%p, off=%d\n",
chunk_hdr->ch_hdr.put_addr,
fip->rfi_data+chunk_hdr->ch_frag_offset,
chunk_hdr->ch_frag_offset);
#endif
/* Stats */
++module->num_chunk_recvs;
/* validate offset and len to be within fragment */
assert(chunk_hdr->ch_frag_offset + chunk_hdr->ch_hdr.payload_len <=
fip->rfi_frag_size);
assert(fip->rfi_frag_size == chunk_hdr->ch_frag_size);
/* copy the data into place */
memcpy(fip->rfi_data + chunk_hdr->ch_frag_offset, (char *)(chunk_hdr+1),
chunk_hdr->ch_hdr.payload_len);
/* update sliding window */
ompi_btl_usnic_update_window(endpoint, window_index);
fip->rfi_bytes_left -= chunk_hdr->ch_hdr.payload_len;
if (0 == fip->rfi_bytes_left) {
mca_btl_base_header_t *pml_header;
mca_btl_base_descriptor_t desc;
mca_btl_base_segment_t segment;
/* Get access to PML header in assembled fragment so we
* can pull out the tag
*/
pml_header = (mca_btl_base_header_t *)(fip->rfi_data);
segment.seg_addr.pval = pml_header;
segment.seg_len = fip->rfi_frag_size;
desc.des_dst = &segment;
desc.des_dst_cnt = 1;
/* only up to PML if this was not a put */
if (chunk_hdr->ch_hdr.put_addr == NULL) {
/* Pass this segment up to the PML */
#if MSGDEBUG2
opal_output(0, " large FRAG complete, pass up %p, %"PRIu64" bytes, tag=%d\n",
desc.des_dst->seg_addr.pval, desc.des_dst->seg_len,
pml_header->tag);
#endif
reg = mca_btl_base_active_message_trigger + pml_header->tag;
/* mca_pml_ob1_recv_frag_callback_frag() */
reg->cbfunc(&module->super, pml_header->tag,
&desc, reg->cbdata);
/* free temp buffer for non-put */
if (0 == fip->rfi_data_pool) {
free(fip->rfi_data);
} else {
OMPI_FREE_LIST_RETURN_MT(
&module->module_recv_buffers[fip->rfi_data_pool],
(ompi_free_list_item_t *)fip->rfi_data);
}
#if MSGDEBUG2
} else {
opal_output(0, "PUT complete, suppressing callback\n");
#endif
}
/* release the fragment ID */
fip->rfi_frag_id = 0;
/* force immediate ACK */
endpoint->endpoint_acktime = 0;
}
goto repost;
}
/***********************************************************************/
/* Frag is an incoming ACK */
else if (OPAL_LIKELY(OMPI_BTL_USNIC_PAYLOAD_TYPE_ACK ==
bseg->us_btl_header->payload_type)) {
ompi_btl_usnic_seq_t ack_seq;
/* sequence being ACKed */
ack_seq = bseg->us_btl_header->ack_seq;
/* Stats */
++module->num_ack_recvs;
#if MSGDEBUG1
opal_output(0, " Received ACK for sequence number %" UDSEQ " from %s to %s\n",
bseg->us_btl_header->ack_seq, src_mac, dest_mac);
#endif
ompi_btl_usnic_handle_ack(endpoint, ack_seq);
goto repost;
}
/***********************************************************************/
/* Have no idea what the frag is; drop it */
else {
++module->num_unk_recvs;
opal_output(0, "==========================unknown 2");
goto repost;
}
/***********************************************************************/
repost:
/* if endpoint exiting, and all ACKs received, release the endpoint */
if (endpoint->endpoint_exiting && ENDPOINT_DRAINED(endpoint)) {
OBJ_RELEASE(endpoint);
}
repost_no_endpoint:
++module->num_recv_reposts;
/* Add recv to linked list for reposting */
seg->rs_recv_desc.next = *repost_recv_head;
*repost_recv_head = &seg->rs_recv_desc;
}
Показать git blame Копировать постоянную ссылку