1
1
openmpi/ompi/mca/pml/dr/pml_dr_recvfrag.h
Rainer Keller 8e1b23779f - Replace combinations of
#if defined (c_plusplus)
          defined (__cplusplus)
   followed by
      extern "C" {
   and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.

   Notable exceptions are:
    - opal/include/opal_config_bottom.h:
      This is our generated code, that itself defines BEGIN_C_DECL and
      END_C_DECL
    - ompi/mpi/cxx/mpicxx.h:
      Here we do not include opal_config_bottom.h:                                 
    - Belongs to external code:                                                    
      opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c        
      opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h        
    - opal/include/opal/prefetch.h:
      Has C++ specific macros that are protected:                                  

    - Had #if ... } #endif  _and_ END_C_DECLS (aka end up with 2x
      END_C_DECLS)
      ompi/mca/btl/openib/btl_openib.h
    - opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
    - opal/win32/ompi_process.h: had extern "C"\n {...
      opal/win32/ompi_process.h: dito
    - ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
      ompi/mpi/f90/test/align_c.c: dito
    - ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
    - ompi/mpi/f90/xml/common-C.xsl: Amend

   Tested on linux using --with-openib and --with-mx

   The following do not contain either opal_config.h, orte_config.h or
   ompi_config.h
   (but possibly other header files, that include one of the above):
      ompi/mca/bml/r2/bml_r2_ft.h
      ompi/mca/btl/gm/btl_gm_endpoint.h
      ompi/mca/btl/gm/btl_gm_proc.h
      ompi/mca/btl/mx/btl_mx_endpoint.h
      ompi/mca/btl/ofud/btl_ofud_endpoint.h
      ompi/mca/btl/ofud/btl_ofud_frag.h
      ompi/mca/btl/ofud/btl_ofud_proc.h
      ompi/mca/btl/openib/btl_openib_mca.h
      ompi/mca/btl/portals/btl_portals_endpoint.h
      ompi/mca/btl/portals/btl_portals_frag.h
      ompi/mca/btl/sctp/btl_sctp_endpoint.h
      ompi/mca/btl/sctp/btl_sctp_proc.h
      ompi/mca/btl/tcp/btl_tcp_endpoint.h
      ompi/mca/btl/tcp/btl_tcp_ft.h
      ompi/mca/btl/tcp/btl_tcp_proc.h
      ompi/mca/btl/template/btl_template_endpoint.h
      ompi/mca/btl/template/btl_template_proc.h
      ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
      ompi/mca/btl/udapl/btl_udapl_endpoint.h
      ompi/mca/btl/udapl/btl_udapl_mca.h
      ompi/mca/btl/udapl/btl_udapl_proc.h
      ompi/mca/mtl/mx/mtl_mx_endpoint.h
      ompi/mca/mtl/mx/mtl_mx.h
      ompi/mca/mtl/psm/mtl_psm_endpoint.h
      ompi/mca/mtl/psm/mtl_psm.h
      ompi/mca/pml/cm/pml_cm_component.h
      ompi/mca/pml/csum/pml_csum_comm.h
      ompi/mca/pml/dr/pml_dr_comm.h
      ompi/mca/pml/dr/pml_dr_component.h
      ompi/mca/pml/dr/pml_dr_endpoint.h
      ompi/mca/pml/dr/pml_dr_recvfrag.h
      ompi/mca/pml/example/pml_example.h
      ompi/mca/pml/ob1/pml_ob1_comm.h
      ompi/mca/pml/ob1/pml_ob1_component.h
      ompi/mca/pml/ob1/pml_ob1_endpoint.h
      ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
      ompi/mca/pml/ob1/pml_ob1_recvfrag.h
      ompi/mca/pml/v/pml_v_output.h
      opal/include/opal/prefetch.h
      opal/mca/timer/aix/timer_aix.h
      opal/util/qsort.h
      test/support/components.h

This commit was SVN r21855.

The following SVN revision numbers were found above:
  r2 --> open-mpi/ompi@58fdc18855
2009-08-20 11:42:18 +00:00

170 строки
7.8 KiB
C

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2006 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2006 The Regents of the University of California.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
/**
* @file
*/
#ifndef MCA_PML_DR_RECVFRAG_H
#define MCA_PML_DR_RECVFRAG_H
#include "ompi/mca/btl/btl.h"
#include "ompi/mca/bml/bml.h"
#include "pml_dr_hdr.h"
BEGIN_C_DECLS
struct mca_pml_dr_buffer_t {
ompi_free_list_item_t super;
size_t len;
unsigned char addr[1];
};
typedef struct mca_pml_dr_buffer_t mca_pml_dr_buffer_t;
OBJ_CLASS_DECLARATION(mca_pml_dr_buffer_t);
struct mca_pml_dr_recv_frag_t {
ompi_free_list_item_t super;
mca_pml_dr_hdr_t hdr;
struct mca_pml_dr_recv_request_t* request;
size_t num_segments;
uint32_t csum;
mca_btl_base_module_t* btl;
ompi_proc_t* proc;
mca_btl_base_segment_t segments[MCA_BTL_DES_MAX_SEGMENTS];
mca_pml_dr_buffer_t* buffers[MCA_BTL_DES_MAX_SEGMENTS];
};
typedef struct mca_pml_dr_recv_frag_t mca_pml_dr_recv_frag_t;
OBJ_CLASS_DECLARATION(mca_pml_dr_recv_frag_t);
#define MCA_PML_DR_RECV_FRAG_ALLOC(frag,rc) \
do { \
ompi_free_list_item_t* item; \
OMPI_FREE_LIST_WAIT(&mca_pml_dr.recv_frags, item, rc); \
frag = (mca_pml_dr_recv_frag_t*)item; \
} while(0)
#define MCA_PML_DR_RECV_FRAG_INIT(frag,oproc,hdr,segs,cnt,btl,csum) \
do { \
size_t i, length = 0; \
uint32_t ui1 = 0; \
size_t ui2 = 0; \
mca_pml_dr_buffer_t** buffers = frag->buffers; \
bool do_csum = mca_pml_dr.enable_csum && \
(btl->btl_flags & MCA_BTL_FLAGS_NEED_CSUM); \
/* init recv_frag */ \
frag->btl = btl; \
frag->hdr = *(mca_pml_dr_hdr_t*)hdr; \
frag->num_segments = cnt; \
frag->proc = oproc; \
\
csum = OPAL_CSUM_ZERO; \
/* copy over data */ \
for( i = 0; i < cnt; i++ ) { \
ompi_free_list_item_t* item; \
mca_pml_dr_buffer_t* buff; \
OMPI_FREE_LIST_WAIT(&mca_pml_dr.buffers, item, rc); \
buff = (mca_pml_dr_buffer_t*)item; \
buffers[i] = buff; \
frag->segments[i].seg_addr.pval = buff->addr; \
frag->segments[i].seg_len = segs[i].seg_len; \
if( do_csum ) { \
size_t hdr_len = 0; \
if( 0 == i ) { \
hdr_len = mca_pml_dr_hdr_size(hdr->hdr_common.hdr_type);\
memcpy( buff->addr, \
segs[i].seg_addr.pval, \
hdr_len ); \
} \
csum = OPAL_CSUM_BCOPY_PARTIAL( \
((unsigned char*)segs[i].seg_addr.pval)+hdr_len, \
((unsigned char*)buff->addr)+hdr_len, \
segs[i].seg_len-hdr_len, segs[i].seg_len-hdr_len, \
&ui1, &ui2); \
length += segs[i].seg_len - hdr_len; \
} else { \
memcpy( buff->addr, \
segs[i].seg_addr.pval, \
segs[i].seg_len ); \
} \
} \
frag->csum = csum; \
} while(0)
#define MCA_PML_DR_RECV_FRAG_RETURN(frag) \
do { \
size_t i; \
\
/* return buffers */ \
for(i=0; i<frag->num_segments; i++) { \
OMPI_FREE_LIST_RETURN(&mca_pml_dr.buffers, \
(ompi_free_list_item_t*)frag->buffers[i]); \
} \
frag->num_segments = 0; \
\
/* return recv_frag */ \
OMPI_FREE_LIST_RETURN(&mca_pml_dr.recv_frags, \
(ompi_free_list_item_t*)frag); \
} while(0)
/**
* Generate an ack to the peer.
*/
void mca_pml_dr_recv_frag_ack(
mca_btl_base_module_t* btl,
mca_bml_base_endpoint_t* endpoint,
mca_pml_dr_common_hdr_t* hdr,
void* src_ptr,
uint64_t mask,
uint16_t len);
/**
* Callback from BTL on receipt of a recv_frag.
*/
void mca_pml_dr_recv_frag_callback( mca_btl_base_module_t *btl,
mca_btl_base_tag_t tag,
mca_btl_base_descriptor_t* descriptor,
void* cbdata);
/**
* Match incoming recv_frags against posted receives.
* Supports out of order delivery.
*
* @param frag_header (IN) Header of received recv_frag.
* @param frag_desc (IN) Received recv_frag descriptor.
* @param match_made (OUT) Flag indicating wether a match was made.
* @param additional_matches (OUT) List of additional matches
* @return OMPI_SUCCESS or error status on failure.
*/
bool mca_pml_dr_recv_frag_match( mca_pml_dr_comm_t* comm,
mca_pml_dr_comm_proc_t* proc,
mca_btl_base_module_t* btl,
mca_pml_dr_match_hdr_t *hdr,
mca_btl_base_segment_t* segments,
size_t num_segments);
END_C_DECLS
#endif