1
1
openmpi/orte/mca/plm/base/plm_base_receive.c
Ralph Castain 9613b3176c Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.

I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.

This commit was SVN r18619.
2008-06-09 14:53:58 +00:00

325 строки
12 KiB
C

/* -*- C -*-
*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
/** @file:
*
*/
/*
* includes
*/
#include "orte_config.h"
#include "orte/constants.h"
#include "orte/types.h"
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif
#include "opal/class/opal_list.h"
#include "orte/util/show_help.h"
#include "opal/mca/mca.h"
#include "opal/mca/base/mca_base_param.h"
#include "opal/dss/dss.h"
#include "orte/util/proc_info.h"
#include "orte/mca/errmgr/errmgr.h"
#include "orte/mca/rml/rml.h"
#include "orte/mca/rml/base/rml_contact.h"
#include "orte/mca/grpcomm/grpcomm.h"
#include "orte/mca/routed/routed.h"
#include "orte/util/name_fns.h"
#include "orte/runtime/orte_globals.h"
#include "orte/runtime/orte_wakeup.h"
#include "orte/runtime/orte_wait.h"
#include "orte/mca/plm/plm_types.h"
#include "orte/mca/plm/plm.h"
#include "orte/mca/plm/base/plm_private.h"
#include "orte/mca/plm/base/base.h"
static bool recv_issued=false;
int orte_plm_base_comm_start(void)
{
int rc;
if (recv_issued) {
return ORTE_SUCCESS;
}
OPAL_OUTPUT_VERBOSE((5, orte_plm_globals.output,
"%s plm:base:receive start comm",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME)));
if (ORTE_SUCCESS != (rc = orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD,
ORTE_RML_TAG_PLM,
ORTE_RML_NON_PERSISTENT,
orte_plm_base_recv,
NULL))) {
ORTE_ERROR_LOG(rc);
}
recv_issued = true;
return rc;
}
int orte_plm_base_comm_stop(void)
{
if (!recv_issued) {
return ORTE_SUCCESS;
}
OPAL_OUTPUT_VERBOSE((5, orte_plm_globals.output,
"%s plm:base:receive stop comm",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME)));
orte_rml.recv_cancel(ORTE_NAME_WILDCARD, ORTE_RML_TAG_PLM);
recv_issued = false;
return ORTE_SUCCESS;
}
/* process incoming messages in order of receipt */
void orte_plm_base_receive_process_msg(int fd, short event, void *data)
{
orte_message_event_t *mev = (orte_message_event_t*)data;
orte_plm_cmd_flag_t command;
orte_std_cntr_t count;
orte_jobid_t job;
orte_job_t *jdata, *parent;
opal_buffer_t answer;
orte_vpid_t vpid;
orte_proc_t **procs;
orte_proc_state_t state;
orte_exit_code_t exit_code;
int rc, ret;
struct timeval beat;
count = 1;
if (ORTE_SUCCESS != (rc = opal_dss.unpack(mev->buffer, &command, &count, ORTE_PLM_CMD))) {
ORTE_ERROR_LOG(rc);
return;
}
switch (command) {
case ORTE_PLM_LAUNCH_JOB_CMD:
OPAL_OUTPUT_VERBOSE((5, orte_plm_globals.output,
"%s plm:base:receive job launch command",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME)));
/* setup a default response */
OBJ_CONSTRUCT(&answer, opal_buffer_t);
job = ORTE_JOBID_INVALID;
/* get the job object */
count = 1;
if (ORTE_SUCCESS != (rc = opal_dss.unpack(mev->buffer, &jdata, &count, ORTE_JOB))) {
ORTE_ERROR_LOG(rc);
goto ANSWER_LAUNCH;
}
/* get the parent's job object */
if (NULL == (parent = orte_get_job_data_object(mev->sender.jobid))) {
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
goto ANSWER_LAUNCH;
}
/* find the sender's node in the job map */
procs = (orte_proc_t**)parent->procs->addr;
/* set the bookmark so the child starts from that place - this means
* that the first child process could be co-located with the proc
* that called comm_spawn, assuming slots remain on that node. Otherwise,
* the procs will start on the next available node
*/
jdata->bookmark = procs[mev->sender.vpid]->node;
/* launch it */
if (ORTE_SUCCESS != (rc = orte_plm.spawn(jdata))) {
ORTE_ERROR_LOG(rc);
goto ANSWER_LAUNCH;
}
job = jdata->jobid;
/* return the favor so that any repetitive comm_spawns track each other */
parent->bookmark = jdata->bookmark;
/* if the child is an ORTE job, wait for the procs to report they are alive */
if (!(jdata->controls & ORTE_JOB_CONTROL_NON_ORTE_JOB)) {
ORTE_PROGRESSED_WAIT(false, jdata->num_reported, jdata->num_procs);
}
ANSWER_LAUNCH:
OPAL_OUTPUT_VERBOSE((5, orte_plm_globals.output,
"%s plm:base:receive job %s launched",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_JOBID_PRINT(job)));
/* pack the jobid to be returned */
if (ORTE_SUCCESS != (ret = opal_dss.pack(&answer, &job, 1, ORTE_JOBID))) {
ORTE_ERROR_LOG(ret);
}
/* send the response back to the sender */
if (0 > (ret = orte_rml.send_buffer(&mev->sender, &answer, ORTE_RML_TAG_PLM_PROXY, 0))) {
ORTE_ERROR_LOG(ret);
}
OBJ_DESTRUCT(&answer);
break;
case ORTE_PLM_UPDATE_PROC_STATE:
count = 1;
jdata = NULL;
while (ORTE_SUCCESS == (rc = opal_dss.unpack(mev->buffer, &job, &count, ORTE_JOBID))) {
OPAL_OUTPUT_VERBOSE((5, orte_plm_globals.output,
"%s plm:base:receive got update_proc_state for job %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_JOBID_PRINT(job)));
/* lookup the job object */
if (NULL == (jdata = orte_get_job_data_object(job))) {
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return;
}
procs = (orte_proc_t**)jdata->procs->addr;
count = 1;
while (ORTE_SUCCESS == (rc = opal_dss.unpack(mev->buffer, &vpid, &count, ORTE_VPID))) {
if (ORTE_VPID_INVALID == vpid) {
/* flag indicates that this job is complete - move on */
break;
}
/* unpack the state */
count = 1;
if (ORTE_SUCCESS != (rc = opal_dss.unpack(mev->buffer, &state, &count, ORTE_PROC_STATE))) {
ORTE_ERROR_LOG(rc);
return;
}
/* unpack the exit code */
count = 1;
if (ORTE_SUCCESS != (rc = opal_dss.unpack(mev->buffer, &exit_code, &count, ORTE_EXIT_CODE))) {
ORTE_ERROR_LOG(rc);
return;
}
OPAL_OUTPUT_VERBOSE((5, orte_plm_globals.output,
"%s plm:base:receive got update_proc_state for vpid %lu state %x exit_code %d",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
(unsigned long)vpid, (unsigned int)state, (int)exit_code));
/* update the termination counter IFF the state is changing to something
* indicating terminated
*/
if (ORTE_PROC_STATE_UNTERMINATED < state &&
ORTE_PROC_STATE_UNTERMINATED > procs[vpid]->state) {
++jdata->num_terminated;
}
/* update the data */
procs[vpid]->state = state;
procs[vpid]->exit_code = exit_code;
/* update orte's exit status if it is non-zero */
ORTE_UPDATE_EXIT_STATUS(exit_code);
}
count = 1;
}
if (ORTE_ERR_UNPACK_READ_PAST_END_OF_BUFFER != rc) {
ORTE_ERROR_LOG(rc);
} else {
rc = ORTE_SUCCESS;
}
/* NOTE: jdata CAN BE NULL. This is caused by an orted
* being ordered to kill all its procs, but there are no
* procs left alive on that node. This can happen, for example,
* when a proc aborts somewhere, but the procs on this node
* have completed.
* So check job has to know how to handle a NULL pointer
*/
orte_plm_base_check_job_completed(jdata);
break;
case ORTE_PLM_HEARTBEAT_CMD:
OPAL_OUTPUT_VERBOSE((5, orte_plm_globals.output,
"%s plm:base:receive got heartbeat from %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&mev->sender)));
/* lookup the daemon object */
if (NULL == (jdata = orte_get_job_data_object(ORTE_PROC_MY_NAME->jobid))) {
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
return;
}
procs = (orte_proc_t**)jdata->procs->addr;
gettimeofday(&beat, NULL);
procs[mev->sender.vpid]->beat = beat.tv_sec;
break;
default:
ORTE_ERROR_LOG(ORTE_ERR_VALUE_OUT_OF_BOUNDS);
return;
}
/* release the message */
OBJ_RELEASE(mev);
/* see if an error occurred - if so, wakeup so we can exit */
if (ORTE_SUCCESS != rc) {
orte_wakeup();
}
}
/*
* handle message from proxies
* NOTE: The incoming buffer "buffer" is OBJ_RELEASED by the calling program.
* DO NOT RELEASE THIS BUFFER IN THIS CODE
*/
void orte_plm_base_recv(int status, orte_process_name_t* sender,
opal_buffer_t* buffer, orte_rml_tag_t tag,
void* cbdata)
{
int rc;
OPAL_OUTPUT_VERBOSE((5, orte_plm_globals.output,
"%s plm:base:receive got message from %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(sender)));
/* don't process this right away - we need to get out of the recv before
* we process the message as it may ask us to do something that involves
* more messaging! Instead, setup an event so that the message gets processed
* as soon as we leave the recv.
*
* The macro makes a copy of the buffer, which we release above - the incoming
* buffer, however, is NOT released here, although its payload IS transferred
* to the message buffer for later processing
*/
ORTE_MESSAGE_EVENT(sender, buffer, tag, orte_plm_base_receive_process_msg);
/* reissue the recv */
if (ORTE_SUCCESS != (rc = orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD,
ORTE_RML_TAG_PLM,
ORTE_RML_NON_PERSISTENT,
orte_plm_base_recv,
NULL))) {
ORTE_ERROR_LOG(rc);
}
return;
}