1
1
openmpi/autogen.sh
Jeff Squyres 176cecfb3b Fix for LT 2.1 libltdl lt_dlopen behavior of putting loaded DSO's in a
private scope.  Solves the problem of Red Hat-provided OFED not
working properly because the libibverbs plugins are not linked
against libibverbs.

This commit was SVN r13926.
2007-03-05 17:21:42 +00:00

1141 строка
34 KiB
Bash
Исполняемый файл

#! /usr/bin/env bash
#
# Copyright (c) 2004-2006 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This script is run on developer copies of Open MPI -- *not*
# distribution tarballs.
#set -x
##############################################################################
#
# User-definable parameters (search path and minimum supported versions)
#
# Note: use ';' to separate parameters
##############################################################################
ompi_aclocal_search="aclocal"
if test ! -z "$ACLOCAL"; then
ompi_aclocal_search="$ACLOCAL"
fi
ompi_autoheader_search="autoheader"
if test ! -z "$AUTOHEADER"; then
ompi_autoheader_search="$AUTOHEADER"
fi
ompi_autoconf_search="autoconf"
if test ! -z "$AUTOCONF"; then
ompi_autoconf_search="$AUTOCONF"
fi
ompi_autom4te_search="autom4te"
if test ! -z "$AUTOM4TE"; then
ompi_autom4te_search="$AUTOM4TE"
fi
ompi_libtoolize_search="libtoolize;glibtoolize"
if test ! -z "$LIBTOOLIZE"; then
ompi_libtoolize_search="$LIBTOOLIZE"
fi
ompi_automake_search="automake"
if test ! -z "$AUTOMAKE"; then
ompi_automake_search="$AUTOMAKE"
fi
ompi_automake_version="1.9.6"
ompi_autoconf_version="2.59"
ompi_libtool_version="1.5.16"
##############################################################################
#
# Global variables - should not need to modify defaults
#
##############################################################################
ompi_aclocal_version="$ompi_automake_version"
ompi_autoheader_version="$ompi_autoconf_version"
ompi_libtoolize_version="$ompi_libtool_version"
ompi_autom4te_version="$ompi_autoconf_version"
# program names to execute
ompi_aclocal=""
ompi_autoheader=""
ompi_autoconf=""
ompi_libtoolize=""
ompi_automake=""
mca_no_configure_components_file="config/mca_no_configure_components.m4"
mca_no_config_list_file="mca_no_config_list"
mca_no_config_env_file="mca_no_config_env"
mca_m4_include_file="config/mca_m4_config_include.m4"
mca_m4_config_env_file="mca_m4_config_env"
autogen_subdir_file="autogen.subdirs"
topdir_file="opal/include/opal_config_bottom.h"
if echo a | grep -E '(a|b)' >/dev/null 2>&1; then
egrep='grep -E'
else
egrep=egrep
fi
############################################################################
#
# Version check - does major,minor,release check (hopefully ignoring
# beta et al)
#
# INPUT:
# - minimum version allowable
# - version we found
#
# OUTPUT:
# - 0 version is ok
# - 1 version is not ok
#
# SIDE EFFECTS:
# none
#
##############################################################################
check_version() {
local min_version="$1"
local version="$2"
local min_major_version="`echo $min_version | cut -f1 -d.`"
local min_minor_version="`echo $min_version | cut -f2 -d.`"
local min_release_version="`echo $min_version | cut -f3 -d.`"
if test "$min_release_version" = "" ; then
min_release_version=0
fi
local major_version="`echo $version | cut -f1 -d.`"
local minor_version="`echo $version | cut -f2 -d.`"
local release_version="`echo $version | cut -f3 -d.`"
if test "$release_version" = "" ; then
release_version=0
fi
if test $min_major_version -lt $major_version ; then
return 0
elif test $min_major_version -gt $major_version ; then
return 1
fi
if test $min_minor_version -lt $minor_version ; then
return 0
elif test $min_minor_version -gt $minor_version ; then
return 1
fi
if test $min_release_version -gt $release_version ; then
return 1
fi
return 0
}
##############################################################################
#
# find app - find a version of the given application that is new
# enough for use
#
# INPUT:
# - name of application (eg aclocal)
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - sets application_name variable to working executable name
# - aborts on error finding application
#
##############################################################################
find_app() {
local app_name="$1"
local version="0.0.0"
local min_version="99.99.99"
local found=0
local tmpIFS=$IFS
eval "min_version=\"\$ompi_${app_name}_version\""
eval "search_path=\"\$ompi_${app_name}_search\""
IFS=";"
for i in $search_path ; do
IFS="$tmpIFS"
version="`${i} --version 2>&1`"
if test "$?" != 0 ; then
IFS=";"
continue
fi
version="`echo $version | cut -f2 -d')'`"
version="`echo $version | cut -f1 -d' '`"
if check_version $min_version $version ; then
eval "ompi_${app_name}=\"${i}\""
found=1
break
fi
done
IFS="$tmpIFS"
if test "$found" = "0" ; then
cat <<EOF
I could not find a recent enough copy of ${app_name}.
I am gonna abort. :-(
Please make sure you are using at least the following versions of the
GNU tools:
GNU Autoconf $ompi_autoconf_version
GNU Automake $ompi_automake_version
NOTE: You may need Automake 1.8.5 (or higher) in order to run
"make dist" successfully
GNU Libtool $ompi_libtool_version
EOF
exit 1
fi
}
##############################################################################
#
# run_and_check - run the right GNU tool, printing warning on failure
#
# INPUT:
# - name of application (eg aclocal)
# - program arguments
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - aborts on error running application
#
##############################################################################
run_and_check() {
local rac_progs="$*"
echo "[Running] $rac_progs"
eval $rac_progs
if test "$?" != 0; then
cat <<EOF
-------------------------------------------------------------------------
It seems that the execution of "$rac_progs" has failed. See above for
the specific error message that caused it to abort.
-------------------------------------------------------------------------
EOF
exit 1
fi
}
##############################################################################
#
# find_and_delete - look for standard files in a number of common places
# (e.g., ./config.guess, config/config.guess, dist/config.guess), and
# delete it. If it's not found there, look for AC_CONFIG_AUX_DIR in
# the configure.in script and try there. If it's not there, oh well.
#
# INPUT:
# - file to delete
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - files may disappear
#
##############################################################################
find_and_delete() {
local fad_file="$1"
local fad_cfile
local auxdir
# Look for the file in "standard" places
if test -f $fad_file; then
rm -f $fad_file
elif test -d config/$fad_file; then
rm -f config/$fad_file
elif test -d dist/$fad_file; then
rm -f dist/$fad_file
else
# Didn't find it -- look for an AC_CONFIG_AUX_DIR line in
# configure.[in|ac]
if test -f configure.in; then
fad_cfile=configure.in
elif test -f configure.ac; then
fad_cfile=configure.ac
else
echo "--> Errr... there's no configure.in or configure.ac file!"
fi
if test -n "$fad_cfile"; then
auxdir="`grep AC_CONFIG_AUX_DIR $fad_cfile | $egrep -v '^dnl' | cut -d\( -f 2 | cut -d\) -f 1`"
fi
if test -f "$auxdir/$fad_file"; then
rm -f "$auxdir/$fad_file"
fi
fi
}
##############################################################################
#
# run_gnu_tools - run the GNU tools in a given directory
#
# INPUT:
# - OMPI top directory
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - assumes that the directory is ready to have the GNU tools run
# in it (i.e., there's some form of configure.*)
# - may preprocess the directory before running the GNU tools
# (e.g., generale Makefile.am's from configure.params, etc.)
#
##############################################################################
run_gnu_tools() {
rgt_ompi_topdir="$1"
# Sanity check to ensure that there's a configure.in or
# configure.ac file here, or if there's a configure.params
# file and we need to run make_configure.pl.
if test -f configure.params -a -f configure.stub -a \
-x "$rgt_ompi_topdir/config/mca_make_configure.pl"; then
cat <<EOF
*** Found configure.stub
*** Running mca_make_configure.pl
EOF
"$rgt_ompi_topdir/config/mca_make_configure.pl" \
--ompidir "$rgt_ompi_topdir" \
--componentdir "`pwd`"
if test "$?" != "0"; then
echo "*** autogen.sh failed to complete!"
exit 1
fi
# If we need to make a version header template file, do so
rgt_abs_dir="`pwd`"
rgt_component_name=`basename "$rgt_abs_dir"`
rgt_component_type=`dirname "$rgt_abs_dir"`
rgt_component_type=`basename "$rgt_component_type"`
rgt_ver_header="$rgt_abs_dir/$rgt_component_type-$rgt_component_name-version.h"
rgt_ver_header_base=`basename "$rgt_ver_header"`
make_version_header_template "$rgt_ver_header_base" "$rgt_component_type" "$rgt_component_name"
happy=1
file=configure.ac
elif test -f configure.in; then
happy=1
file=configure.in
elif test -f configure.ac; then
happy=1
file=configure.ac
else
cat <<EOF
--> Err... there's no configure.in or configure.ac file in this directory
--> Confused; aborting in despair
EOF
exit 1
fi
unset happy
# Find and delete the GNU helper script files
find_and_delete config.guess
find_and_delete config.sub
find_and_delete depcomp
find_and_delete compile
find_and_delete install-sh
find_and_delete ltconfig
find_and_delete ltmain.sh
find_and_delete missing
find_and_delete mkinstalldirs
find_and_delete libtool
# Run the GNU tools
echo "*** Running GNU tools"
if test -f $topdir_file ; then
cd config
run_and_check $ompi_autom4te --language=m4sh ompi_get_version.m4sh -o ompi_get_version.sh
cd ..
fi
run_and_check $ompi_aclocal
if test "`grep AC_CONFIG_HEADER $file`" != "" -o \
"`grep AM_CONFIG_HEADER $file`" != ""; then
run_and_check $ompi_autoheader
fi
run_and_check $ompi_autoconf
# We only need the libltdl stuff for the top-level
# configure, not any of the MCA components.
if test -f $topdir_file ; then
rm -rf libltdl opal/libltdl opal/ltdl.h
run_and_check $ompi_libtoolize --automake --copy --ltdl
if test -d libltdl; then
mv libltdl opal
fi
if test ! -r opal/libltdl/ltdl.h; then
cat <<EOF
$ompi_libtoolize --ltdl apparently failed to install libltdl.
Please check that you have the libltdl development files installed.
EOF
exit 1
fi
echo "Adjusting libltdl for OMPI :-("
echo " -- patching for argz bugfix in libtool 1.5"
cd opal/libltdl
if test "`grep 'while ((before >= *pargz) && (before[-1] != LT_EOS_CHAR))' ltdl.c`" != ""; then
patch -N -p0 <<EOF
--- ltdl.c.old 2003-11-26 16:42:17.000000000 -0500
+++ ltdl.c 2003-12-03 17:06:27.000000000 -0500
@@ -682,7 +682,7 @@
/* This probably indicates a programmer error, but to preserve
semantics, scan back to the start of an entry if BEFORE points
into the middle of it. */
- while ((before >= *pargz) && (before[-1] != LT_EOS_CHAR))
+ while ((before > *pargz) && (before[-1] != LT_EOS_CHAR))
--before;
{
EOF
#'
else
echo " ==> your libtool doesn't need this! yay!"
fi
cd ../..
echo " -- patching 64-bit OS X bug in ltmain.sh"
if test ! -z "`grep otool config/ltmain.sh`" -a \
-z "`grep otool64 config/ltmain.sh`"; then
patch -N -p0 < config/ltmain_otool.diff
else
echo " ==> your libtool doesn't need this! yay!"
fi
echo " -- RTLD_GLOBAL in libltdl"
if test -r opal/libltdl/loaders/dlopen.c && \
test ! -z "`grep 'filename, LT_LAZY_OR_NOW' opal/libltdl/loaders/dlopen.c`"; then
patch -N -p0 < config/libltdl_dlopen_global.diff
else
echo " ==> your libltdl doesn't need this! yay!"
fi
echo " -- patching configure for broken -c/-o compiler test"
sed -e 's/chmod -w \./#OMPI\/MPI FIX: chmod -w ./' \
configure > configure.new
mv configure.new configure
chmod a+x configure
else
run_and_check $ompi_libtoolize --automake --copy
fi
run_and_check $ompi_automake --foreign -a --copy --include-deps
}
##############################################################################
#
# run_no_configure_component
# Prepares the non-configure component
#
# INPUT:
# - OMPI top directory
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
#
##############################################################################
run_no_configure_component() {
noconf_dir="$1"
noconf_ompi_topdir="$2"
noconf_project="$3"
noconf_framework="$4"
noconf_component="$5"
# Write out to two files (they're merged at the end)
noconf_list_file="$noconf_ompi_topdir/$mca_no_config_list_file"
noconf_env_file="$noconf_ompi_topdir/$mca_no_config_env_file"
cat >> "$noconf_list_file" <<EOF
dnl ----------------------------------------------------------------
dnl No-configure component:
dnl $noconf_dir
EOF
# Tell configure to add all the PARAM_CONFIG_FILES to
# the AC_CONFIG_FILES list.
for file in $PARAM_CONFIG_FILES; do
echo "AC_CONFIG_FILES([$noconf_dir/$file])" >> "$noconf_list_file"
done
cat <<EOF
--> Adding to top-level configure no-configure subdirs:
--> $noconf_dir
--> Adding to top-level configure AC_CONFIG_FILES list:
--> $PARAM_CONFIG_FILES
EOF
echo "$PARAM_CONFIG_PRIORITY $noconf_component" >> "$noconf_env_file"
}
##############################################################################
#
# run_m4_configure_component
# Prepares the component with an .m4 file that should be used to
# configure the component.
#
# INPUT:
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
#
##############################################################################
run_m4_configure_component() {
m4conf_dir="$1"
m4conf_ompi_topdir="$2"
m4conf_project="$3"
m4conf_framework="$4"
m4conf_component="$5"
# Write out to two files (they're merged at the end)
m4conf_list_file="$m4conf_ompi_topdir/$mca_no_config_list_file"
m4conf_env_file="$m4conf_ompi_topdir/$mca_m4_config_env_file"
cat >> "$m4conf_list_file" <<EOF
dnl ----------------------------------------------------------------
dnl m4-configure component:
dnl $m4conf_dir
EOF
# Tell configure to add all the PARAM_CONFIG_FILES to
# the AC_CONFIG_FILES list.
for file in $PARAM_CONFIG_FILES; do
echo "AC_CONFIG_FILES([$m4conf_dir/$file])" >> "$m4conf_list_file"
done
# add the m4_include of the m4 file into the mca .m4 file
# directly. It shouldn't be in a macro, so this is fairly safe to
# do. By this point, there should already be a header and all
# that. m4_includes are relative to the currently included file,
# so need the .. to get us from config/ to the topsrcdir again.
echo "m4_include(${m4conf_project}/mca/${m4conf_framework}/${m4conf_component}/configure.m4)" >> "$m4conf_ompi_topdir/$mca_m4_include_file"
cat <<EOF
--> Adding to top-level configure m4-configure subdirs:
--> $m4conf_dir
--> Adding to top-level configure AC_CONFIG_FILES list:
--> $PARAM_CONFIG_FILES
EOF
echo "$PARAM_CONFIG_PRIORITY $m4conf_component" >> "$m4conf_env_file"
}
##############################################################################
#
# process_dir - look at the files present in a given directory, and do
# one of the following:
# - skip/ignore it
# - run custom autogen.sh in it
# - run the GNU tools in it
# - get a list of Makefile.am's to add to the top-level configure
#
# INPUT:
# - directory to run in
# - OMPI top directory
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - skips directories with .ompi_no_gnu .ompi_ignore
# - uses provided autogen.sh if available
#
##############################################################################
process_dir() {
pd_dir="$1"
pd_ompi_topdir="$2"
pd_project="$3"
pd_framework="$4"
pd_component="$5"
pd_cur_dir="`pwd`"
# Convert to absolutes
if test -d "$pd_dir"; then
cd "$pd_dir"
pd_abs_dir="`pwd`"
cd "$pd_cur_dir"
fi
if test -d "$pd_ompi_topdir"; then
cd "$pd_ompi_topdir"
pd_ompi_topdir="`pwd`"
cd "$pd_cur_dir"
fi
# clean our environment a bit, since we might evaluate a configure.params
unset PARAM_CONFIG_FILES
PARAM_CONFIG_PRIORITY="0"
if test -d "$pd_dir"; then
cd "$pd_dir"
# See if the package doesn't want us to set it up
if test -f .ompi_no_gnu; then
cat <<EOF
*** Found .ompi_no_gnu file -- skipping GNU setup in:
*** `pwd`
EOF
elif test -f .ompi_ignore -a ! -f .ompi_unignore; then
# Note that if we have an empty (but existant)
# .ompi_unignore, then we ignore the .ompi_ignore file
# (and therefore build the component)
cat <<EOF
*** Found .ompi_ignore file -- skipping entire tree:
*** `pwd`
EOF
# Use && instead of -a here for the test conditions because if
# you use -a, then "test" will execute *all* condition clauses
# (even if the first one is false), meaning that grep will
# fail if there is no .ompi_unignore file. If you use &&,
# then the latter tests will not be executed if a prior one
# fails (i.e., grep won't run if .ompi_unignore does not
# exist).
elif test -f .ompi_ignore && \
test -s .ompi_unignore && \
test -z "`$egrep $USER\$\|$USER@$HOST .ompi_unignore`" ; then
# If we have a non-empty .ompi_unignore and our username
# is in there somewhere, we ignore the .ompi_ignore (and
# therefore build the component). Otherwise, this
# condition is true and we don't configure.
cat <<EOF
*** Found .ompi_ignore file and .ompi_unignore didn't invalidate --
*** skipping entire tree:
*** `pwd`
EOF
elif test "$pd_abs_dir" != "$pd_ompi_topdir" -a -x autogen.sh; then
cat <<EOF
*** Found custom autogen.sh file in:
*** `pwd`
EOF
./autogen.sh
if test ! $? -eq 0 ; then
echo "Error running autogen.sh -l in `pwd`. Aborting."
exit 1
fi
elif test -f configure.params -a -f configure.m4 ; then
cat <<EOF
*** Found configure.params and configure.m4
*** `pwd`
EOF
. ./configure.params
if test -z "$PARAM_CONFIG_FILES"; then
cat <<EOF
*** No PARAM_CONFIG_FILES!
*** Nothing to do -- skipping this directory
EOF
else
# temporary workaround - remove possibly there configure code
rm -f "configure" "configure.ac*" "acinclude*" "aclocal.m4"
run_m4_configure_component "$pd_dir" "$pd_ompi_topdir" \
"$pd_project" "$pd_framework" "$pd_component"
fi
elif test -f configure.ac -o -f configure.in; then
# If we have configure.ac or configure.in, run the GNU
# tools here
cat <<EOF
*** Found configure.(in|ac)
*** `pwd`
EOF
run_gnu_tools "$pd_ompi_topdir"
elif test -f configure.params -a -f configure.stub; then
cat <<EOF
*** Found configure.params and configure.stub
*** `pwd`
EOF
run_gnu_tools "$pd_ompi_topdir"
elif test -f configure.params; then
cat <<EOF
*** Found configure.params
*** `pwd`
EOF
. ./configure.params
if test -z "$PARAM_CONFIG_FILES"; then
cat <<EOF
*** No PARAM_CONFIG_FILES!
*** Nothing to do -- skipping this directory
EOF
else
run_no_configure_component "$pd_dir" "$pd_ompi_topdir" \
"$pd_project" "$pd_framework" "$pd_component"
fi
else
cat <<EOF
*** Nothing found; directory skipped
*** `pwd`
EOF
fi
# See if there's a file containing additional directories to
# traverse. Shell scripts aren't too good at recursion (no
# local state!), so just have a child autogen.sh do the work.
if test -f $autogen_subdir_file; then
pd_subdir_start_dir="`pwd`"
echo ""
echo "==> Found $autogen_subdir_file -- sub-traversing..."
echo ""
for dir in `cat $autogen_subdir_file`; do
if test -d "$dir"; then
echo "*** Running autogen.sh in $dir"
echo "*** (started in $pd_subdir_start_dir)"
cd "$dir"
$pd_ompi_topdir/autogen.sh -l
if test ! $? -eq 0 ; then
echo "Error running autogen.sh -l in $dir. Aborting."
exit 1
fi
cd "$pd_subdir_start_dir"
echo ""
fi
done
echo "<== Back in $pd_subdir_start_dir"
echo "<== autogen.sh continuing..."
fi
# Go back to the topdir
cd "$pd_cur_dir"
fi
unset PARAM_CONFIG_FILES PARAM_VERSION_FILE
unset pd_dir pd_ompi_topdir pd_cur_dir pd_component_type
}
##############################################################################
#
# make_template_version_header -- make a templated version header
# file, but only if we have a PARAM_VERSION_FILE that exists
#
# INPUT:
# - filename base
# - component type name
# - component name
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
#
##############################################################################
make_version_header_template() {
mvht_filename="$1"
mvht_component_type="$2"
mvht_component_name="$3"
# See if we have a VERSION file
PARAM_CONFIG_FILES_save="$PARAM_CONFIG_FILES"
. ./configure.params
if test -z "$PARAM_VERSION_FILE"; then
if test -f "VERSION"; then
PARAM_VERSION_FILE="VERSION"
fi
else
if test ! -f "$PARAM_VERSION_FILE"; then
PARAM_VERSION_FILE=
fi
fi
if test -n "$PARAM_VERSION_FILE" -a -f "$PARAM_VERSION_FILE" -a \
"$pd_component_type" != "common"; then
rm -f "$mvht_filename.template.in"
cat > "$mvht_filename.template.in" <<EOF
/*
* This file is automatically created by autogen.sh; it should not
* be edited by hand!!
*
* List of version number for this component
*/
#ifndef MCA_${mvht_component_type}_${mvht_component_name}_VERSION_H
#define MCA_${mvht_component_type}_${mvht_component_name}_VERSION_H
#define MCA_${mvht_component_type}_${mvht_component_name}_MAJOR_VERSION @MCA_${mvht_component_type}_${mvht_component_name}_MAJOR_VERSION@
#define MCA_${mvht_component_type}_${mvht_component_name}_MINOR_VERSION @MCA_${mvht_component_type}_${mvht_component_name}_MINOR_VERSION@
#define MCA_${mvht_component_type}_${mvht_component_name}_RELEASE_VERSION @MCA_${mvht_component_type}_${mvht_component_name}_RELEASE_VERSION@
#define MCA_${mvht_component_type}_${mvht_component_name}_GREEK_VERSION "@MCA_${mvht_component_type}_${mvht_component_name}_GREEK_VERSION@"
#define MCA_${mvht_component_type}_${mvht_component_name}_SVN_VERSION "@MCA_${mvht_component_type}_${mvht_component_name}_SVN_VERSION@"
#define MCA_${mvht_component_type}_${mvht_component_name}_VERSION "@MCA_${mvht_component_type}_${mvht_component_name}_VERSION@"
#endif /* MCA_${mvht_component_type}_${mvht_component_name}_VERSION_H */
EOF
fi
PARAM_CONFIG_FILES="$PARAM_CONFIG_FILES_save"
unset PARAM_VERSION_FILE PARAM_CONFIG_FILES_save
}
component_list_sort() {
cls_filename="$1"
# why, oh, why can't non-gnu sort support the -s (stable) option?
# Solaris sort supports -r -n and -u, so we'll assume that works everywhere
# get the list of priorities
component_list=
cls_priority_list=`sort -r -n -u "$cls_filename" | cut -f1 -d' ' | xargs`
for cls_priority in $cls_priority_list ; do
component_list="$component_list "`grep "^$cls_priority " "$cls_filename" | cut -f2 -d' ' | xargs`
done
}
##############################################################################
#
# run_global - run the config in the top OMPI dir and all MCA components
#
# INPUT:
# none
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
#
##############################################################################
run_global() {
# [Re-]Create the mca_component_list file
rm -f "$mca_no_configure_components_file" "$mca_no_config_list_file" \
"$mca_no_config_env_file" "$mca_m4_config_env_file" "$mca_m4_include_file"
touch "$mca_no_configure_components_file" "$mca_no_config_list_file" \
"$mca_m4_config_env_file" "$mca_m4_include_file"
# create header for the component m4 include file
cat > "$mca_m4_include_file" <<EOF
dnl
dnl \$HEADER
dnl
dnl This file is automatically created by autogen.sh; it should not
dnl be edited by hand!!
EOF
#create header for the component config file
cat > "$mca_no_configure_components_file" <<EOF
dnl
dnl \$HEADER
dnl
dnl This file is automatically created by autogen.sh; it should not
dnl be edited by hand!!
EOF
# Now run the config in every directory in <location>/mca/*/*
# that has a configure.in or configure.ac script
#
# In order to deal with components that have .m4 files, we need to
# build up m4_defined lists along the way. Unfortunately, there
# is no good way to do this at the end (stupid sh), so we have to
# do it as we are going through the lists of frameworks and
# components. Use a file to keep the list of components (we don't
# want every component in a framework included, as the
# determination about skipping components or whether the component
# has its own configure script are made later on in the process.
rg_cwd="`pwd`"
echo $rg_cwd
project_list=""
for project_path in $config_project_list; do
project=`basename "$project_path"`
project_list="$project_list $project"
framework_list=""
for framework_path in $project_path/mca/*; do
framework=`basename "$framework_path"`
if test "$framework" != "base" -a \
-d "$framework_path" ; then
if test "$framework" = "common" -o \
-r "${framework_path}/${framework}.h" ; then
framework_list="$framework_list $framework"
# Add the framework's configure file into configure,
# if there is one
if test -r "${framework_path}/configure.m4" ; then
echo "m4_include(${framework_path}/configure.m4)" >> "$mca_m4_include_file"
fi
rm -f "$mca_no_config_env_file" "$mca_m4_config_env_file"
touch "$mca_no_config_env_file" "$mca_m4_config_env_file"
for component_path in "$framework_path"/*; do
if test -d "$component_path"; then
if test -f "$component_path/configure.in" -o \
-f "$component_path/configure.params" -o \
-f "$component_path/configure.ac"; then
component=`basename "$component_path"`
process_dir "$component_path" "$rg_cwd" \
"$project" "$framework" "$component"
fi
fi
done
fi
# make list of components that are "no configure".
# Sort the list by priority (stable, so things stay in
# alphabetical order at the same priority), then munge
# it into form we like
component_list=
component_list_sort $mca_no_config_env_file
component_list_define="m4_define(mca_${framework}_no_config_component_list, ["
component_list_define_first="1"
for component in $component_list ; do
if test "$component_list_define_first" = "1"; then
component_list_define="${component_list_define}${component}"
component_list_define_first="0"
else
component_list_define="${component_list_define}, ${component}"
fi
done
component_list_define="${component_list_define}])"
echo "$component_list_define" >> "$mca_no_configure_components_file"
# make list of components that are "m4 configure"
component_list=
component_list_sort $mca_m4_config_env_file
component_list_define="m4_define(mca_${framework}_m4_config_component_list, ["
component_list_define_first="1"
for component in $component_list ; do
if test "$component_list_define_first" = "1"; then
component_list_define="${component_list_define}${component}"
component_list_define_first="0"
else
component_list_define="${component_list_define}, ${component}"
fi
done
component_list_define="${component_list_define}])"
echo "$component_list_define" >> "$mca_no_configure_components_file"
fi
done
# make list of frameworks for this project
framework_list_define="m4_define(mca_${project}_framework_list, ["
framework_list_define_first="1"
for framework in $framework_list ; do
if test "$framework_list_define_first" = "1"; then
framework_list_define="${framework_list_define}${framework}"
framework_list_define_first="0"
else
framework_list_define="${framework_list_define}, ${framework}"
fi
done
framework_list_define="${framework_list_define}])"
echo "$framework_list_define" >> "$mca_no_configure_components_file"
done
# create the m4 defines for the list of projects. The list of
# frameworks for each project is already created and in the file.
project_list_define="m4_define(mca_project_list, ["
project_list_define_first="1"
for project in $project_list ; do
if test "$project_list_define_first" = "1"; then
project_list_define="${project_list_define}${project}"
project_list_define_first="0"
else
project_list_define="${project_list_define}, ${project}"
fi
done
project_list_define="${project_list_define}])"
echo "$project_list_define" >> "$mca_no_configure_components_file"
cat >> "$mca_no_configure_components_file" <<EOF
dnl List all the no-configure components that we found, and AC_DEFINE
dnl their versions
AC_DEFUN([MCA_NO_CONFIG_CONFIG_FILES],[
`cat $mca_no_config_list_file`
])dnl
EOF
# Remove temp files
rm -f $mca_no_config_list_file $mca_no_config_env_file $mca_m4_config_env_file
# Finally, after we found all the no-configure MCA components, run
# the config in the top-level directory
process_dir . . "" "" ""
unset project project_path framework framework_path component component_path
}
##############################################################################
#
# main - do the real work...
#
##############################################################################
# announce
echo "[Checking] command line parameters"
# Check the command line to see if we should run the whole shebang, or
# just in this current directory.
want_local=no
ompidir=
no_ompi=0
no_orte=0
for arg in $*; do
case $arg in
-l) want_local=yes ;;
-ompidir|--ompidir|-ompi|--ompi) ompidir="$2" ;;
-no-ompi) no_ompi=1 ;;
-no-orte) no_orte=1 ;;
*) ;;
esac
shift
done
# announce
echo "[Checking] prerequisites"
# sanity check to make sure user isn't being stupid
if test ! -d .svn ; then
cat <<EOF
This doesn't look like a developer copy of Open MPI. You probably do not
want to run autogen.sh - it is normally not needed for a release source
tree. Giving you 5 seconds to reconsider and kill me.
EOF
sleep 5
fi
# figure out if we're at the top level of the OMPI tree, a component's
# top-level directory, or somewhere else.
if test -f VERSION -a -f configure.ac -a -f $topdir_file ; then
# locations to look for mca modules
config_project_list="opal orte ompi"
if test "$no_ompi" = "1" ; then
config_project_list="opal orte"
fi
if test "$no_orte" = "1" ; then
config_project_list="opal"
fi
echo "Configuring projects: $config_project_list"
# Top level of OMPI tree
ompidir="`pwd`"
elif test -f configure.in -o -f configure.ac -o -f configure.params ; then
# Top level of a component directory
want_local=yes
if test -z "$ompidir"; then
ompidir="../../../.."
fi
else
cat <<EOF
You must run this script from either the top level of the OMPI
directory tree or the top-level of an MCA component directory tree.
EOF
exit 1
fi
# find all the apps we are going to run
find_app "autom4te"
find_app "aclocal"
find_app "autoheader"
find_app "autoconf"
find_app "libtoolize"
find_app "automake"
# do the work
if test "$want_local" = "yes"; then
process_dir . $ompidir
else
run_global
fi
# All done
exit 0