1
1
openmpi/opal/runtime/opal_progress.c
Nathan Hjelm e4f920f6f9 opal/progress: improve performance when there are no LP callbacks
This commit adds another check to the low-priority callback
conditional that short-circuits the atomic-add if there are no
low-priority callbacks. This should improve performance in the common
case.

Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
2016-06-22 09:52:37 -06:00

482 строки
14 KiB
C

/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */
/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2006-2016 Los Alamos National Security, LLC. All rights
* reserved.
* Copyright (c) 2015-2016 Research Organization for Information Science
* and Technology (RIST). All rights reserved.
*
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "opal_config.h"
#ifdef HAVE_SCHED_H
#include <sched.h>
#endif
#include "opal/runtime/opal_progress.h"
#include "opal/mca/event/event.h"
#include "opal/mca/base/mca_base_var.h"
#include "opal/constants.h"
#include "opal/mca/timer/base/base.h"
#include "opal/util/output.h"
#include "opal/runtime/opal_params.h"
#define OPAL_PROGRESS_USE_TIMERS (OPAL_TIMER_CYCLE_SUPPORTED || OPAL_TIMER_USEC_SUPPORTED)
#if OPAL_ENABLE_DEBUG
bool opal_progress_debug = false;
#endif
/*
* default parameters
*/
static int opal_progress_event_flag = OPAL_EVLOOP_ONCE | OPAL_EVLOOP_NONBLOCK;
int opal_progress_spin_count = 10000;
/*
* Local variables
*/
static opal_atomic_lock_t progress_lock;
/* callbacks to progress */
static volatile opal_progress_callback_t *callbacks = NULL;
static size_t callbacks_len = 0;
static size_t callbacks_size = 0;
static volatile opal_progress_callback_t *callbacks_lp = NULL;
static size_t callbacks_lp_len = 0;
static size_t callbacks_lp_size = 0;
/* do we want to call sched_yield() if nothing happened */
bool opal_progress_yield_when_idle = false;
#if OPAL_PROGRESS_USE_TIMERS
static opal_timer_t event_progress_last_time = 0;
static opal_timer_t event_progress_delta = 0;
#else
/* current count down until we tick the event library */
static int32_t event_progress_counter = 0;
/* reset value for counter when it hits 0 */
static int32_t event_progress_delta = 0;
#endif
/* users of the event library from MPI cause the tick rate to
be every time */
static int32_t num_event_users = 0;
#if OPAL_ENABLE_DEBUG
static int debug_output = -1;
#endif
/**
* Fake callback used for threading purpose when one thread
* progesses callbacks while another unregister somes. The root
* of the problem is that we allow modifications of the callback
* array directly from the callbacks themselves. Now if
* writing a pointer is atomic, we should not have any more
* problems.
*/
static int fake_cb(void) { return 0; }
static int _opal_progress_unregister (opal_progress_callback_t cb, volatile opal_progress_callback_t *callback_array,
size_t *callback_array_len);
/* init the progress engine - called from orte_init */
int
opal_progress_init(void)
{
/* reentrant issues */
opal_atomic_init(&progress_lock, OPAL_ATOMIC_UNLOCKED);
/* set the event tick rate */
opal_progress_set_event_poll_rate(10000);
#if OPAL_ENABLE_DEBUG
if (opal_progress_debug) {
debug_output = opal_output_open(NULL);
}
#endif
callbacks_size = callbacks_lp_size = 8;
callbacks = malloc (callbacks_size * sizeof (callbacks[0]));
callbacks_lp = malloc (callbacks_lp_size * sizeof (callbacks_lp[0]));
if (NULL == callbacks || NULL == callbacks_lp) {
free ((void *) callbacks);
free ((void *) callbacks_lp);
callbacks_size = callbacks_lp_size = 0;
callbacks = callbacks_lp = NULL;
return OPAL_ERR_OUT_OF_RESOURCE;
}
for (size_t i = 0 ; i < callbacks_size ; ++i) {
callbacks[i] = fake_cb;
}
for (size_t i = 0 ; i < callbacks_lp_size ; ++i) {
callbacks_lp[i] = fake_cb;
}
OPAL_OUTPUT((debug_output, "progress: initialized event flag to: %x",
opal_progress_event_flag));
OPAL_OUTPUT((debug_output, "progress: initialized yield_when_idle to: %s",
opal_progress_yield_when_idle ? "true" : "false"));
OPAL_OUTPUT((debug_output, "progress: initialized num users to: %d",
num_event_users));
OPAL_OUTPUT((debug_output, "progress: initialized poll rate to: %ld",
(long) event_progress_delta));
return OPAL_SUCCESS;
}
int
opal_progress_finalize(void)
{
/* free memory associated with the callbacks */
opal_atomic_lock(&progress_lock);
callbacks_len = 0;
callbacks_size = 0;
free ((void *) callbacks);
callbacks = NULL;
callbacks_lp_len = 0;
callbacks_lp_size = 0;
free ((void *) callbacks_lp);
callbacks_lp = NULL;
opal_atomic_unlock(&progress_lock);
return OPAL_SUCCESS;
}
/*
* Progress the event library and any functions that have registered to
* be called. We don't propogate errors from the progress functions,
* so no action is taken if they return failures. The functions are
* expected to return the number of events progressed, to determine
* whether or not we should call sched_yield() during MPI progress.
* This is only losely tracked, as an error return can cause the number
* of progressed events to appear lower than it actually is. We don't
* care, as the cost of that happening is far outweighed by the cost
* of the if checks (they were resulting in bad pipe stalling behavior)
*/
void
opal_progress(void)
{
static volatile uint32_t num_calls = 0;
size_t i;
int events = 0;
if( opal_progress_event_flag != 0 ) {
#if OPAL_HAVE_WORKING_EVENTOPS
#if OPAL_PROGRESS_USE_TIMERS
#if OPAL_TIMER_USEC_NATIVE
opal_timer_t now = opal_timer_base_get_usec();
#else
opal_timer_t now = opal_timer_base_get_cycles();
#endif /* OPAL_TIMER_USEC_NATIVE */
/* trip the event library if we've reached our tick rate and we are
enabled */
if (now - event_progress_last_time > event_progress_delta ) {
event_progress_last_time = (num_event_users > 0) ?
now - event_progress_delta : now;
events += opal_event_loop(opal_sync_event_base, opal_progress_event_flag);
}
#else /* OPAL_PROGRESS_USE_TIMERS */
/* trip the event library if we've reached our tick rate and we are
enabled */
if (OPAL_THREAD_ADD32(&event_progress_counter, -1) <= 0 ) {
event_progress_counter =
(num_event_users > 0) ? 0 : event_progress_delta;
events += opal_event_loop(opal_sync_event_base, opal_progress_event_flag);
}
#endif /* OPAL_PROGRESS_USE_TIMERS */
#endif /* OPAL_HAVE_WORKING_EVENTOPS */
}
/* progress all registered callbacks */
for (i = 0 ; i < callbacks_len ; ++i) {
events += (callbacks[i])();
}
if (callbacks_lp_len > 0 && (OPAL_THREAD_ADD32((volatile int32_t *) &num_calls, 1) & 0x7) == 0) {
/* run low priority callbacks once every 8 calls to opal_progress() */
for (i = 0 ; i < callbacks_lp_len ; ++i) {
events += (callbacks_lp[i])();
}
}
#if OPAL_HAVE_SCHED_YIELD
if (opal_progress_yield_when_idle && events <= 0) {
/* If there is nothing to do - yield the processor - otherwise
* we could consume the processor for the entire time slice. If
* the processor is oversubscribed - this will result in a best-case
* latency equivalent to the time-slice.
*/
sched_yield();
}
#endif /* defined(HAVE_SCHED_YIELD) */
}
int
opal_progress_set_event_flag(int flag)
{
int tmp = opal_progress_event_flag;
opal_progress_event_flag = flag;
OPAL_OUTPUT((debug_output, "progress: set_event_flag setting to %d", flag));
return tmp;
}
void
opal_progress_event_users_increment(void)
{
#if OPAL_ENABLE_DEBUG
int32_t val;
val = opal_atomic_add_32(&num_event_users, 1);
OPAL_OUTPUT((debug_output, "progress: event_users_increment setting count to %d", val));
#else
(void)opal_atomic_add_32(&num_event_users, 1);
#endif
#if OPAL_PROGRESS_USE_TIMERS
/* force an update next round (we'll be past the delta) */
event_progress_last_time -= event_progress_delta;
#else
/* always reset the tick rate - can't hurt */
event_progress_counter = 0;
#endif
}
void
opal_progress_event_users_decrement(void)
{
#if OPAL_ENABLE_DEBUG || ! OPAL_PROGRESS_USE_TIMERS
int32_t val;
val = opal_atomic_sub_32(&num_event_users, 1);
OPAL_OUTPUT((debug_output, "progress: event_users_decrement setting count to %d", val));
#else
(void)opal_atomic_sub_32(&num_event_users, 1);
#endif
#if !OPAL_PROGRESS_USE_TIMERS
/* start now in delaying if it's easy */
if (val >= 0) {
event_progress_counter = event_progress_delta;
}
#endif
}
bool
opal_progress_set_yield_when_idle(bool yieldopt)
{
bool tmp = opal_progress_yield_when_idle;
opal_progress_yield_when_idle = (yieldopt) ? 1 : 0;
OPAL_OUTPUT((debug_output, "progress: progress_set_yield_when_idle to %s",
opal_progress_yield_when_idle ? "true" : "false"));
return tmp;
}
void
opal_progress_set_event_poll_rate(int polltime)
{
OPAL_OUTPUT((debug_output, "progress: progress_set_event_poll_rate(%d)", polltime));
#if OPAL_PROGRESS_USE_TIMERS
event_progress_delta = 0;
# if OPAL_TIMER_USEC_NATIVE
event_progress_last_time = opal_timer_base_get_usec();
# else
event_progress_last_time = opal_timer_base_get_cycles();
# endif
#else
event_progress_counter = event_progress_delta = 0;
#endif
if (polltime == 0) {
#if OPAL_PROGRESS_USE_TIMERS
/* user specified as never tick - tick once per minute */
event_progress_delta = 60 * 1000000;
#else
/* user specified as never tick - don't count often */
event_progress_delta = INT_MAX;
#endif
} else {
#if OPAL_PROGRESS_USE_TIMERS
event_progress_delta = polltime;
#else
/* subtract one so that we can do post-fix subtraction
in the inner loop and go faster */
event_progress_delta = polltime - 1;
#endif
}
#if OPAL_PROGRESS_USE_TIMERS && !OPAL_TIMER_USEC_NATIVE
/* going to use cycles for counter. Adjust specified usec into cycles */
event_progress_delta = event_progress_delta * opal_timer_base_get_freq() / 1000000;
#endif
}
static int opal_progress_find_cb (opal_progress_callback_t cb, volatile opal_progress_callback_t *cbs,
size_t cbs_len)
{
for (size_t i = 0 ; i < cbs_len ; ++i) {
if (cbs[i] == cb) {
return (int) i;
}
}
return OPAL_ERR_NOT_FOUND;
}
static int _opal_progress_register (opal_progress_callback_t cb, volatile opal_progress_callback_t **cbs,
size_t *cbs_size, size_t *cbs_len)
{
int ret = OPAL_SUCCESS;
if (OPAL_ERR_NOT_FOUND != opal_progress_find_cb (cb, *cbs, *cbs_len)) {
return OPAL_SUCCESS;
}
/* see if we need to allocate more space */
if (*cbs_len + 1 > *cbs_size) {
opal_progress_callback_t *tmp, *old;
tmp = (opal_progress_callback_t *) malloc (sizeof (tmp[0]) * 2 * *cbs_size);
if (tmp == NULL) {
return OPAL_ERR_TEMP_OUT_OF_RESOURCE;
}
if (*cbs) {
/* copy old callbacks */
memcpy (tmp, (void *) *cbs, sizeof(tmp[0]) * *cbs_size);
}
for (size_t i = *cbs_len ; i < 2 * *cbs_size ; ++i) {
tmp[i] = fake_cb;
}
opal_atomic_wmb ();
/* swap out callback array */
old = opal_atomic_swap_ptr (cbs, tmp);
opal_atomic_wmb ();
free (old);
*cbs_size *= 2;
}
cbs[0][*cbs_len] = cb;
++*cbs_len;
opal_atomic_wmb ();
return ret;
}
int opal_progress_register (opal_progress_callback_t cb)
{
int ret;
opal_atomic_lock(&progress_lock);
(void) _opal_progress_unregister (cb, callbacks_lp, &callbacks_lp_len);
ret = _opal_progress_register (cb, &callbacks, &callbacks_size, &callbacks_len);
opal_atomic_unlock(&progress_lock);
return ret;
}
int opal_progress_register_lp (opal_progress_callback_t cb)
{
int ret;
opal_atomic_lock(&progress_lock);
(void) _opal_progress_unregister (cb, callbacks, &callbacks_len);
ret = _opal_progress_register (cb, &callbacks_lp, &callbacks_lp_size, &callbacks_lp_len);
opal_atomic_unlock(&progress_lock);
return ret;
}
static int _opal_progress_unregister (opal_progress_callback_t cb, volatile opal_progress_callback_t *callback_array,
size_t *callback_array_len)
{
int ret = opal_progress_find_cb (cb, callback_array, *callback_array_len);
if (OPAL_ERR_NOT_FOUND == ret) {
return ret;
}
/* If we found the function we're unregistering: If callbacks_len
is 0, we're not goig to do anything interesting anyway, so
skip. If callbacks_len is 1, it will soon be 0, so no need to
do any repacking. */
for (size_t i = (size_t) ret ; i < *callback_array_len - 1 ; ++i) {
/* copy callbacks atomically since another thread may be in
* opal_progress(). */
(void) opal_atomic_swap_ptr (callback_array + i, callback_array[i+1]);
}
callback_array[*callback_array_len] = fake_cb;
--*callback_array_len;
return OPAL_SUCCESS;
}
int opal_progress_unregister (opal_progress_callback_t cb)
{
int ret;
opal_atomic_lock(&progress_lock);
ret = _opal_progress_unregister (cb, callbacks, &callbacks_len);
if (OPAL_SUCCESS != ret) {
/* if not in the high-priority array try to remove from the lp array.
* a callback will never be in both. */
ret = _opal_progress_unregister (cb, callbacks_lp, &callbacks_lp_len);
}
opal_atomic_unlock(&progress_lock);
return ret;
}