openmpi/ompi/mca/io/base/base.h

/*
 * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
 *                         University Research and Technology
 *                         Corporation.  All rights reserved.
 * Copyright (c) 2004-2005 The University of Tennessee and The University
 *                         of Tennessee Research Foundation.  All rights
 *                         reserved.
 * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
 *                         University of Stuttgart.  All rights reserved.
 * Copyright (c) 2004-2005 The Regents of the University of California.
 *                         All rights reserved.
 * Copyright (c) 2008      Cisco Systems, Inc.  All rights reserved.
 * $COPYRIGHT$
 * 
 * Additional copyrights may follow
 * 
 * $HEADER$
 */

/** 
 * @file
 *
 * MCA io base framework public interface functions.
 */

#ifndef MCA_IO_BASE_H
#define MCA_IO_BASE_H

#include "ompi_config.h"

#include "mpi.h"
#include "opal/class/opal_list.h"
#include "ompi/class/ompi_free_list.h"
#include "ompi/mca/io/io.h"


/*
 * Global functions for MCA overall io open and close
 */

BEGIN_C_DECLS
    /**
     * Initialize the io MCA framework
     *
     * @retval OMPI_SUCCESS Upon success
     * @retval OMPI_ERROR Upon failure
     *
     * This must be the first function invoked in the io MCA
     * framework.  It initializes the io MCA framework, finds and
     * opens io components, etc.
     *
     * This function is invoked during ompi_mpi_init() and during the
     * initialization of the special case of the laminfo command.
     * 
     * This function fills in the internal global variable
     * mca_io_base_components_opened, which is a list of all io components
     * that were successfully opened.  This variable should \em only be
     * used by other io base functions -- it is not considered a
     * public interface member -- and is only mentioned here for
     * completeness.
     */
    OMPI_DECLSPEC int mca_io_base_open(void);

    /**
     * Create list of available io components.
     *
     * @param allow_multi_user_threads Will be set to true if any of the
     * available components will allow multiple user threads
     * @param have_hidden_threads Will be set to true if any of the
     * available components have hidden threads.
     *
     * @retval OMPI_SUCCESS If one or more io components are available.
     * @retval OMPI_ERROR If no io components are found to be available.
     *
     * This function is invoked during ompi_mpi_init() to query all
     * successfully opened io components and create a list of all
     * available io components.
     *
     * This function traverses the (internal global variable)
     * mca_io_base_components_opened list and queries each component to see
     * if it ever might want to run during this MPI process.  It creates
     * another internal global variable list named
     * mca_io_base_components_available, consisting of a list of components
     * that are available for selection when file handles are created.
     * This variable should \em only be used by other io base
     * functions -- it is not considered a public interface member --
     * and is only mentioned here for completeness.
     */
    OMPI_DECLSPEC int mca_io_base_find_available(bool enable_progress_threads,
                                                 bool enable_mpi_threads);
    
    /**
     * Select an available component for a new file handle.
     *
     * @param file File Handle that the component will be selected for.
     * @param preferred The component that is preferred for this
     * file handle (or NULL).
     *
     * @return OMPI_SUCCESS Upon success.
     * @return OMPI_ERROR Upon failure.
     *
     * Note that the types of the parameters have "struct" in them
     * (e.g., ompi_file_t" vs. a plain "ompi_file_t") to
     * avoid an include file loop.  All similar types (e.g., "struct
     * ompi_file_t *", "ompi_file_t *", and "MPI_File")
     * are all typedef'ed to be the same, so the fact that we use struct
     * here in the prototype is ok.
     *
     * This function is invoked when a new file handle is created and a
     * io component needs to be selected for it.  It should be invoked
     * near the end of the file handle creation process such that
     * almost everything else is functional on the file handle.
     *
     * This function invokes the selection process for io components,
     * which works as follows:
     *
     * - If the \em preferred argument is NULL, the selection set is
     *   defined to be all the components found during
     *   mca_io_base_find_available().  
     * - If \em preferred is not NULL, then the selection set is just
     *   that component.  (However, in this mode, we may make 2 passes
     *   through the selection process -- more on this below).
     * - All components in the selection set are queried to see if they
     *   want to run with that file handle.  All components that want to
     *   run are ranked by their priority and the highest priority
     *   component is selected.  All non-selected components have their
     *   "unquery" function invoked to let them know that they were not
     *   selected.
     * - The selected module will have its "init" function
     *   invoked to let it know that it was selected.  All unselected
     *   components will have their file_unselect function invoked.
     * - If we fall through this entire process and no component is
     *   selected \em and the \em preferred argument is not NULL, then
     *   run the entire process again as if the \em preferred argument
     *   was NULL (i.e., use the entire available set of components).
     *
     * At the end of this process, we'll either have a single
     * component/module pair that is selected and initialized for the
     * file handle, or no component was selected and an error is
     * returned up the stack.
     */
    OMPI_DECLSPEC int mca_io_base_file_select(struct ompi_file_t *file,
                                              mca_base_component_t *preferred);

    /**
     * Finalize a io component on a specific file handle.
     *
     * @param file The file handle that is being destroyed.
     *
     * @retval OMPI_SUCCESS Always.
     *
     * Note that the type of the parameter is only a "struct
     * ompi_file_t" (vs. a plain "ompi_file_t") to avoid an include file
     * loop.  The types "struct ompi_file_t *", "ompi_file_t *", and
     * "MPI_File" are all typedef'ed to be the same, so the fact that we
     * use struct here in the prototype is ok.
     *
     * This function is invoked near the beginning of the destruction of
     * a file handle.  It finalizes the io component associated with the
     * file handle (e.g., allowing the component to clean up and free any
     * resources allocated for that file handle).  Note that similar to
     * mca_io_base_select(), as result of this function, other
     * file handles may also be destroyed.
     */
    OMPI_DECLSPEC int mca_io_base_file_unselect(struct ompi_file_t *file);

    /**
     * Invoke a back-end component to delete a file.
     *
     * @param filename Name of the file to be deleted
     * @param info MPI_Info for additional information
     *
     * This function is a bit different than most other MPI_File_*
     * functions -- it does not take a MPI_File handle.  As such, this
     * function function invokes appropriate delete handlers on all
     * the available components (rather than some pre-selected
     * module).  See io.h for details.
     */
    OMPI_DECLSPEC int mca_io_base_delete(char *filename, 
                                         struct ompi_info_t *info);

    /**
     * Initialize the components-in-use list.
     *
     * @returns OMPI_SUCCESS Always
     *
     * Creates resources associated with the io framework's
     * currently-in-use list.
     */
    OMPI_DECLSPEC int mca_io_base_component_init(void);

    /**
     * Add a comoponent to the io framework's currently-in-use list,
     * or increase its refcount if it's already in the list.
     *
     * @param comp The component being added (union)
     *
     * Add a component to the list of components that is monitored
     * every time we go to make progress on asynchronous requests.  If
     * the component is already in the list, its reference count will
     * be increases.  
     *
     * For asynchronous progress, opal_progress() will call
     * mca_io_base_progress(), which will go down the list of active
     * io components and call their progress() function.
     *
     * Since components on this list are refcounted; they must be
     * removed with mca_io_base_component_del() for each time that
     * they are added with mca_io_base_component_add().  Once their
     * refcount reaches 0, they are removed from the list and will not
     * be called for asynchronous progress.
     *
     * This function is protected by a mutex; it is safe to call this
     * function from multiple threads simultaneously.
     */
    OMPI_DECLSPEC int mca_io_base_component_add(mca_io_base_components_t *comp);

    /**
     * Decrease the refcount of a component in the io framework's
     * currently-in-use list.
     *
     * @param comp The component to be [potentially] removed from the
     * currently-in-use list.
     *
     * Find a component in the currently-in-use list and decrease its
     * refcount.  If its refcount goes to 0, it will be removed from
     * the list and will not be polled for asynchonous progress.
     *
     * This function is protected by a mutex; it is safe to call this
     * function from multiple threads simultaneously.
     */
    OMPI_DECLSPEC int mca_io_base_component_del(mca_io_base_components_t *comp);

    /**
     * Return all the cached requests on an MPI_File to the global IO
     * request freelist.
     *
     * @param file MPI_File to flush the cache
     *
     * 
     */
    OMPI_DECLSPEC void mca_io_base_request_return(struct ompi_file_t *file);

    /**
     * Shut down the component list
     *
     * @returns OMPI_SUCCESS Always
     *
     * Destroys resources associated with the io framework's
     * currently-in-use list.
     */
    OMPI_DECLSPEC int mca_io_base_component_finalize(void);

    /**
     * Shut down the io MCA framework.
     *
     * @retval OMPI_SUCCESS Always
     *
     * This function shuts down everything in the io MCA framework,
     * and is called during ompi_mpi_finalize() and the special case of
     * the laminfo fileand.
     *
     * It must be the last function invoked on the io MCA framework.
     */
    OMPI_DECLSPEC int mca_io_base_close(void);

    OMPI_DECLSPEC int mca_io_base_component_run_progress(void);

    OMPI_DECLSPEC int mca_io_base_register_datarep(char *,
                                              MPI_Datarep_conversion_function*,
                                              MPI_Datarep_conversion_function*,
                                              MPI_Datarep_extent_function*,
                                              void*);

/*
 * Globals
 */

/**
 * Index number from the "io" MCA parameter, created when the io
 * framework is initialized and used during scope selection.
 */
OMPI_DECLSPEC extern int mca_io_base_param;
/**
 * io framework debugging stream ID used with opal_output() and
 * opal_output_verbose().
 */
OMPI_DECLSPEC extern int mca_io_base_output;

/**
 * Indicator as to whether the list of opened io components is valid or
 * not.
 */
OMPI_DECLSPEC extern bool mca_io_base_components_opened_valid;
/**
 * List of all opened components; created when the io framework is
 * initialized and destroyed when we reduce the list to all available
 * io components.
 */
OMPI_DECLSPEC extern opal_list_t mca_io_base_components_opened;
/**
 * Indicator as to whether the list of available io components is valid
 * or not.
 */
OMPI_DECLSPEC extern bool mca_io_base_components_available_valid;
/**
 * List of all available components; created by reducing the list of open
 * components to all those who indicate that they may run during this
 * process.
 */
OMPI_DECLSPEC extern opal_list_t mca_io_base_components_available;
/**
 * Indicator as to whether the freelist of IO requests is valid or
 * not.
 */
OMPI_DECLSPEC extern bool mca_io_base_requests_valid;
/**
 * Free list of IO requests
 */
OMPI_DECLSPEC extern ompi_free_list_t mca_io_base_requests;

END_C_DECLS
#endif /* MCA_BASE_IO_H */