1
1
openmpi/ompi/Makefile.am
Jeff Squyres 7ace873b50 Add MPI_T.5 man page for Open MPI-specific info
Also added infrastructure to have developers write man pages in
Markdown (vs. nroff).  Pandoc >=v1.12 is used to convert those
Markdown files into actual nroff man pages.

Dist tarballs will contain generated nroff man pages; we don't want to
require users to have Pandoc installed.  Anyone who builds Open MPI
from a git clone will need to have Pandoc installed (similar to how we
treat Flex).  You can opt out of Open MPI's Pandoc-generated man pages
by configuring Open MPI with --disable-man-pages.  This will also
disable "make dist" (i.e., "make dist" will error if you configured
with --disable-man-pages).

Also removed the stuff to re-generate man pages.

This commit also:

1. Includes a new man page, written in Markdown
   (ompi/mpi/man/man5/MPI_T.5.md) that contains Open MPI-specific
   information about MPI_T.
2. Includes a converted ompi/mpi/man/man3/MPI_T_init_thread.3.md (from
   MPI_T_init_thread.3in -- i.e., nroff) just to show that Markdown
   can be used throughout the Open MPI code base for man pages.
3. Made the Makefiles in ompi/mpi/man/man?/ be full-fledged
   Makefile.am's (vs. Makefile.extras that are designed to be included
   in ompi/Makefile.am).  It is more convenient to test generation /
   installation of man pages when you can "make" and "make install" in
   their respective directories (vs. doing a build / install for the
   entire ompi project).
4. Removed logic from ompi/Makefile.am that re-generated man pages if
   opal_config.h changes.

Other man pages -- hopefully all of them! -- will be converted to
Markdown over time.

Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
2020-05-02 12:45:31 -07:00

204 строки
6.9 KiB
Makefile

#
# Copyright (c) 2004-2009 The Trustees of Indiana University and Indiana
# University Research and Technology
# Corporation. All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
# of Tennessee Research Foundation. All rights
# reserved.
# Copyright (c) 2004-2009 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# Copyright (c) 2008-2019 Cisco Systems, Inc. All rights reserved
# Copyright (c) 2008 Sun Microsystems, Inc. All rights reserved.
# Copyright (c) 2010-2011 Sandia National Laboratories. All rights reserved.
# Copyright (c) 2013-2015 Los Alamos National Security, LLC. All rights
# reserved.
# Copyright (c) 2015-2019 Intel, Inc. All rights reserved.
# Copyright (c) 2015-2018 Research Organization for Information Science
# and Technology (RIST). All rights reserved.
# Copyright (c) 2016 IBM Corporation. All rights reserved.
# Copyright (c) 2018 FUJITSU LIMITED. All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# We always have C bindings, but do we have profiling?
if BUILD_MPI_BINDINGS_LAYER
c_mpi_lib = mpi/c/libmpi_c_mpi.la mpi/tool/libmpi_mpit.la
else
c_mpi_lib =
endif
c_pmpi_lib = mpi/c/profile/libmpi_c_pmpi.la mpi/tool/profile/libmpi_pmpit.la
# See if we have Fortran mpif.h MPI bindings
if OMPI_BUILD_FORTRAN_MPIFH_BINDINGS
mpi_fortran_base_lib = mpi/fortran/base/libmpi_fortran_base.la
else
mpi_fortran_base_lib =
endif
# Note that the ordering of "." in SUBDIRS is important: the Fortran
# mpif.h, and use mpi/use mpi_f08 bindings are all in standalone .la
# files that depend on libmpi.la. So we must fully build libmpi.la
# first.
# NOTE: A handful of files in mpi/fortran/base must be included in
# libmpi.la. But we wanted to keep all the Fortran sources together
# in the same tree, so we moved those sources to a separate
# subdirectory with its own Makefile.include that is included in this
# Makefile.am (NOTE: it did *not* work to put all the files -- base
# and non-base -- into mpi/fortran/mpif-h and have both a regular
# Makefile.am for building the mpif.h bindings library and a separate
# Makefile.include that was included in this top-level Makefile.am;
# problems occurred with "make distclean" and files in the
# ompi/mpi/fortran/mpif-h/.deps directory -- it's not clear whether
# this is an AM bug or whether this behavior is simply not supported).
# This ompi/mpi/fortran/base/Makefile.include file makes a convenience
# LT library that is then sucked into libmpi.la (the
# ompi/mpi/fortran/base sources must be compiled with special
# CPPFLAGS; we can't just add the raw sources to libmpi_la_SOURCES,
# unfortunately).
# The end of the result is that libmpi.la -- including a few sources
# from mpi/fortran/base -- is fully built before the mpif.h, and
# use mpi/use mpi_f08 bindings are built. Therefore, the mpif.h
# and use mpi/use mpi_f08 bindings libraries can all link against
# libmpi.la.
# NOTE: The ordering of this list is VERY CAREFULLY CRAFTED! Do not
# change the ordering unless you really know what you're doing. :-)
SUBDIRS = \
include \
datatype \
debuggers \
etc \
mpi/c \
mpi/tool \
$(OMPI_MPIEXT_C_DIRS) \
mpi/fortran/base/ \
$(MCA_ompi_FRAMEWORKS_SUBDIRS) \
$(MCA_ompi_FRAMEWORK_COMPONENT_STATIC_SUBDIRS) \
. \
$(OMPI_MPIEXT_MPIFH_DIRS) \
mpi/fortran/mpif-h \
$(OMPI_MPIEXT_USEMPI_DIR) \
$(OMPI_FORTRAN_USEMPI_DIR) \
mpi/fortran/mpiext-use-mpi \
mpi/fortran/use-mpi-f08/base \
mpi/fortran/use-mpi-f08/mod \
mpi/fortran/use-mpi-f08/bindings \
$(OMPI_MPIEXT_USEMPIF08_DIRS) \
mpi/fortran/use-mpi-f08 \
mpi/fortran/mpiext-use-mpi-f08 \
$(MCA_ompi_FRAMEWORK_COMPONENT_DSO_SUBDIRS) \
$(OMPI_CONTRIB_SUBDIRS) \
mpi/man/man3 \
mpi/man/man5
if OMPI_WANT_JAVA_BINDINGS
SUBDIRS += \
mpi/java
endif
# The ordering of the DIST_SUBDIRS isn't as important, but note that
# its contents *are* different than SUBDIRS. In particular, the
# MPIEXT subdirs has a different value that is *not* equivalent to the
# union of the various $(OMPI_MPIEXT_*_DIRS) variables from SUBDIRS!
DIST_SUBDIRS = \
include \
datatype \
debuggers \
etc \
mpi/c \
mpi/tool \
mpi/fortran/base \
mpi/fortran/mpif-h \
mpi/fortran/use-mpi-tkr \
mpi/fortran/use-mpi-ignore-tkr \
mpi/fortran/mpiext-use-mpi \
mpi/fortran/use-mpi-f08 \
mpi/fortran/use-mpi-f08/base \
mpi/fortran/use-mpi-f08/mod \
mpi/fortran/use-mpi-f08/bindings \
mpi/fortran/mpiext-use-mpi-f08 \
mpi/java \
$(OMPI_MPIEXT_ALL_SUBDIRS) \
$(MCA_ompi_FRAMEWORKS_SUBDIRS) \
$(MCA_ompi_FRAMEWORK_COMPONENT_ALL_SUBDIRS) \
$(OMPI_CONTRIB_DIST_SUBDIRS) \
mpi/man/man3 \
mpi/man/man5
# Build the main MPI library
lib_LTLIBRARIES = lib@OMPI_LIBMPI_NAME@.la
lib@OMPI_LIBMPI_NAME@_la_SOURCES =
lib@OMPI_LIBMPI_NAME@_la_LIBADD = \
datatype/libdatatype.la \
debuggers/libdebuggers.la \
mpi/c/libmpi_c.la \
mpi/tool/libmpi_mpit_common.la \
$(c_mpi_lib) \
$(c_pmpi_lib) \
$(mpi_fortran_base_lib) \
$(MCA_ompi_FRAMEWORK_LIBS) \
$(OMPI_MPIEXT_C_LIBS) \
$(OMPI_LIBMPI_EXTRA_LIBS)
lib@OMPI_LIBMPI_NAME@_la_LIBADD += \
$(OMPI_TOP_BUILDDIR)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
lib@OMPI_LIBMPI_NAME@_la_DEPENDENCIES = $(lib@OMPI_LIBMPI_NAME@_la_LIBADD)
lib@OMPI_LIBMPI_NAME@_la_LDFLAGS = \
-version-info $(libmpi_so_version) \
$(OMPI_LIBMPI_EXTRA_LDFLAGS)
# included subdirectory Makefile.am's and appended-to variables
headers =
noinst_LTLIBRARIES =
include_HEADERS =
dist_ompidata_DATA =
lib@OMPI_LIBMPI_NAME@_la_SOURCES += $(headers)
# Conditionally install the header files
if WANT_INSTALL_HEADERS
ompidir = $(ompiincludedir)/$(subdir)
nobase_ompi_HEADERS = $(headers)
endif
include class/Makefile.am
include attribute/Makefile.am
include communicator/Makefile.am
include dpm/Makefile.am
include errhandler/Makefile.am
include file/Makefile.am
include group/Makefile.am
include info/Makefile.am
include interlib/Makefile.am
include message/Makefile.am
include op/Makefile.am
include peruse/Makefile.am
include proc/Makefile.am
include request/Makefile.am
include runtime/Makefile.am
include win/Makefile.am
include tools/Makefile.am
include mpi/Makefile.am
include mpiext/Makefile.am
include patterns/net/Makefile.am
include patterns/comm/Makefile.am
include mca/Makefile.am
include util/Makefile.am
distclean-local:
rm -f mpiext/static-components.h