openmpi/orte/tools/orterun/help-orterun.txt

# -*- text -*-
#
# Copyright (c) 2004-2006 The Trustees of Indiana University and Indiana
#                         University Research and Technology
#                         Corporation.  All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
#                         of Tennessee Research Foundation.  All rights
#                         reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
#                         University of Stuttgart.  All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
#                         All rights reserved.
# Copyright (c) 2007      Cisco Systems, Inc. All rights reserved.
# $COPYRIGHT$
# 
# Additional copyrights may follow
# 
# $HEADER$
#
# This is the US/English general help file for Open RTE's orterun.
#
[orterun:init-failure]
Open RTE was unable to initialize properly.  The error occured while
attempting to %s.  Returned value %d instead of ORTE_SUCCESS.
[orterun:usage]
%s (%s) %s

Usage: %s [OPTION]...  [PROGRAM]...
Start the given program using Open RTE

%s

Report bugs to %s
[orterun:version]
%s (%s) %s

Report bugs to %s
[orterun:allocate-resources]
%s was unable to allocate enough resources to start your application.
This might be a transient error (too many nodes in the cluster were
unavailable at the time of the request) or a permenant error (you
requsted more nodes than exist in your cluster).

While probably only useful to Open RTE developers, the error returned
was %d.
[orterun:error-spawning]
%s was unable to start the specified application.  An attempt has been
made to clean up all processes that did start.  The error returned was
%d.
[orterun:appfile-not-found]
Unable to open the appfile:

    %s

Double check that this file exists and is readable.
[orterun:executable-not-specified]
No executable was specified on the %s command line.

Aborting.
[orterun:multi-apps-and-zero-np]
%s found multiple applications specified on the command line, with
at least one that failed to specify the number of processes to execute.
When specifying multiple applications, you must specify how many processes
of each to launch via the -np argument.
[orterun:nothing-to-do]
%s could not find anything to do.

It is possible that you forgot to specify how many processes to run
via the "-np" argument.
[orterun:call-failed]
%s encountered a %s call failure.  This should not happen, and
usually indicates an error within the operating system itself.
Specifically, the following error occurred:

    %s

The only other available information that may be helpful is the errno
that was returned: %d.
[orterun:environ]
%s was unable to set
 %s = %s
in the environment. Returned value %d instead of ORTE_SUCCESS.
[orterun:precondition]
%s was unable to precondition transports
Returned value %d instead of ORTE_SUCCESS.
[orterun:attr-failed]
%s was unable to define an attribute
Returned value %d instead of ORTE_SUCCESS.
#
[orterun:proc-ordered-abort]
%s has exited due to process rank %lu with PID %lu on
node %s calling "abort". This may have caused other processes
in the application to be terminated by signals sent by %s
(as reported here).
#
[orterun:proc-exit-no-sync]
%s has exited due to process rank %lu with PID %lu on
node %s exiting without calling "finalize". This may
have caused other processes in the application to be
terminated by signals sent by %s (as reported here).
#
[orterun:proc-exit-no-sync-unknown]
%s has exited due to a process exiting without calling "finalize",
but has no info as to the process that caused that situation. This
may have caused other processes in the application to be
terminated by signals sent by %s (as reported here).
#
[orterun:proc-aborted]
%s noticed that process rank %lu with PID %lu on node %s exited on signal %d.
#
[orterun:proc-aborted-unknown]
%s noticed that the job aborted, but has no info as to the process
that caused that situation.
#
[orterun:proc-aborted-signal-unknown]
%s noticed that the job aborted by signal, but has no info as
to the process that caused that situation.
#
[orterun:proc-aborted-strsignal]
%s noticed that process rank %lu with PID %lu on node %s exited on signal %d (%s).
#
[orterun:abnormal-exit]
WARNING: %s has exited before it received notification that all
started processes had terminated.  You should double check and ensure
that there are no runaway processes still executing.
#
[orterun:sigint-while-processing]
WARNING: %s is in the process of killing a job, but has detected an
interruption (probably control-C).

It is dangerous to interrupt %s while it is killing a job (proper
termination may not be guaranteed).  Hit control-C again within 1
second if you really want to kill %s immediately.
#
[orterun:empty-prefix]
A prefix was supplied to %s that only contained slashes.  

This is a fatal error; %s will now abort.  No processes were launched.
#
[debugger-mca-param-not-found]
Internal error -- the orte_base_user_debugger MCA parameter was not able to
be found.  Please contact the Open RTE developers; this should not
happen.
#
[debugger-orte_base_user_debugger-empty]
The MCA parameter "orte_base_user_debugger" was empty, indicating that
no user-level debuggers have been defined.  Please set this MCA
parameter to a value and try again.
#
[debugger-not-found]
A suitable debugger could not be found in your PATH.  Check the values
specified in the orte_base_user_debugger MCA parameter for the list of
debuggers that was searched.
#
[debugger-exec-failed]
%s was unable to launch the specified debugger.  This is what was
launched:

    %s

Things to check:

    - Ensure that the debugger is installed properly
    - Ensure that the "%s" executable is in your path
    - Ensure that any required licenses are available to run the debugger
#
[orterun:sys-limit-pipe]
%s was unable to launch the specified application as it encountered an error:

Error: system limit exceeded on number of pipes that can be open
Node: %s

when attempting to start process rank %lu.

This can be resolved by either asking the system administrator for that node to
increase the system limit, or by rearranging your processes to place fewer of them
on that node.
#
[orterun:pipe-setup-failure]
%s was unable to launch the specified application as it encountered an error:

Error: pipe function call failed when setting up I/O forwarding subsystem
Node: %s

while attempting to start process rank %lu.
#
[orterun:sys-limit-children]
%s was unable to launch the specified application as it encountered an error:

Error: system limit exceeded on number of processes that can be started
Node: %s

when attempting to start process rank %lu.

This can be resolved by either asking the system administrator for that node to
increase the system limit, or by rearranging your processes to place fewer of them
on that node.
#
[orterun:failed-term-attrs]
%s was unable to launch the specified application as it encountered an error:

Error: reading tty attributes function call failed while setting up I/O forwarding system
Node: %s

while attempting to start process rank %lu.
#
[orterun:wdir-not-found]
%s was unable to launch the specified application as it could not change to the
specified working directory:

Working directory: %s
Node: %s

while attempting to start process rank %lu.
#
[orterun:exe-not-found]
%s was unable to launch the specified application as it could not find an executable:

Executable: %s
Node: %s

while attempting to start process rank %lu.
#
[orterun:exe-not-accessible]
%s was unable to launch the specified application as it could not access
or execute an executable:

Executable: %s
Node: %s

while attempting to start process rank %lu.
#
[orterun:pipe-read-failure]
%s was unable to launch the specified application as it encountered an error:

Error: reading from a pipe function call failed while spawning a local process
Node: %s

while attempting to start process rank %lu.
#
[orterun:proc-failed-to-start]
%s was unable to start the specified application as it encountered an error:

Error name: %s
Node: %s

when attempting to start process rank %lu.
#
[orterun:proc-failed-to-start-no-status]
%s was unable to start the specified application as it encountered an error
on node %s. More information may be available above.
#
[orterun:proc-failed-to-start-no-status-no-node]
%s was unable to start the specified application as it encountered an error.
More information may be available above.
#
[debugger requires -np]
The number of MPI processes to launch was not specified on the command
line.

The %s debugger requires that you specify a number of MPI processes to
launch on the command line via the "-np" command line parameter.  For
example:

    %s -np 4 %s

Skipping the %s debugger for now.
#
[debugger requires executable]
The %s debugger requires that you specify an executable on the %s
command line; you cannot specify application context files when
launching this job in the %s debugger.  For example:

    %s -np 4 my_mpi_executable

Skipping the %s debugger for now.
#
[debugger only accepts single app]
The %s debugger only accepts SPMD-style launching; specifying an
MPMD-style launch (with multiple applications separated via ':') is
not permitted.

Skipping the %s debugger for now.
#
[orterun:daemon-died-during-execution]
%s has detected that a required daemon terminated during execution
of the application with a non-zero status. This is a fatal error.
A best-effort attempt has been made to cleanup. However, it is
-strongly- recommended that you execute the orte-clean utility
to ensure full cleanup is accomplished.
#
[orterun:no-orted-object-exit]
%s was unable to determine the status of the daemons used to
launch this application. Additional manual cleanup may be required.
Please refer to the "orte-clean" tool for assistance.
#
[orterun:unclean-exit]
%s was unable to cleanly terminate the daemons on the nodes shown
below. Additional manual cleanup may be required - please refer to
the "orte-clean" tool for assistance.
#
[orterun:event-def-failed]
%s was unable to define an event required for proper operation of
the system. The reason for this error was:

Error: %s

Please report this to the Open MPI mailing list users@open-mpi.org.
#
[orterun:ompi-server-filename-bad]
%s was unable to parse the filename where contact info for the
ompi-server was to be found. The option we were given was:

--ompi-server %s

This appears to be missing the required ':' following the
keyword "file". Please remember that the correct format for this
command line option is:

--ompi-server file:path-to-file

where path-to-file can be either relative to the cwd or absolute.
#
[orterun:ompi-server-filename-missing]
%s was unable to parse the filename where contact info for the
ompi-server was to be found. The option we were given was:

--ompi-server %s

This appears to be missing a filename following the ':'. Please
remember that the correct format for this command line option is:

--ompi-server file:path-to-file

where path-to-file can be either relative to the cwd or absolute.
#
[orterun:ompi-server-filename-access]
%s was unable to access the filename where contact info for the
ompi-server was to be found. The option we were given was:

--ompi-server %s

Please remember that the correct format for this command line option is:

--ompi-server file:path-to-file

where path-to-file can be either relative to the cwd or absolute, and that
you must have read access permissions to that file.
#
[orterun:ompi-server-file-bad]
%s was unable to read the ompi-server's contact info from the
given filename. The filename we were given was:

FILE: %s

Please remember that the correct format for this command line option is:

--ompi-server file:path-to-file

where path-to-file can be either relative to the cwd or absolute, and that
the file must have a single line in it that contains the Open MPI
uri for the ompi-server. Note that this is *not* a standard uri, but
a special format used internally by Open MPI for communications. It can
best be generated by simply directing the ompi-server to put its
uri in a file, and then giving %s that filename.
[orterun:multiple-hostfiles]
Error: More than one hostfile was passed for a single application context, which
is not supported at this time.