Copyright (c) 2004-2007 The Trustees of Indiana University and Indiana
                        University Research and Technology
                        Corporation.  All rights reserved.
Copyright (c) 2004-2007 The University of Tennessee and The University
                        of Tennessee Research Foundation.  All rights
                        reserved.
Copyright (c) 2004-2008 High Performance Computing Center Stuttgart, 
                        University of Stuttgart.  All rights reserved.
Copyright (c) 2004-2007 The Regents of the University of California.
                        All rights reserved.
Copyright (c) 2006-2010 Cisco Systems, Inc.  All rights reserved.
Copyright (c) 2006-2011 Mellanox Technologies. All rights reserved.
Copyright (c) 2006-2012 Oracle and/or its affiliates.  All rights reserved.
Copyright (c) 2007      Myricom, Inc.  All rights reserved.
Copyright (c) 2008      IBM Corporation.  All rights reserved.
Copyright (c) 2010      Oak Ridge National Labs.  All rights reserved.
Copyright (c) 2011	University of Houston. All rights reserved.
$COPYRIGHT$

Additional copyrights may follow

$HEADER$
 
===========================================================================

When submitting questions and problems, be sure to include as much
extra information as possible.  This web page details all the
information that we request in order to provide assistance:

     http://www.open-mpi.org/community/help/

The best way to report bugs, send comments, or ask questions is to
sign up on the user's and/or developer's mailing list (for user-level
and developer-level questions; when in doubt, send to the user's
list):

        users@open-mpi.org
        devel@open-mpi.org

Because of spam, only subscribers are allowed to post to these lists
(ensure that you subscribe with and post from exactly the same e-mail
address -- joe@example.com is considered different than
joe@mycomputer.example.com!).  Visit these pages to subscribe to the
lists:

     http://www.open-mpi.org/mailman/listinfo.cgi/users
     http://www.open-mpi.org/mailman/listinfo.cgi/devel

Thanks for your time.

===========================================================================

Much, much more information is also available in the Open MPI FAQ:

    http://www.open-mpi.org/faq/

===========================================================================

Detailed Open MPI v1.5 Feature List:

  o Open MPI RunTime Environment (ORTE) improvements
    - General robustness improvements
    - Scalable job launch (we've seen ~16K processes in less than a
      minute in a highly-optimized configuration)
    - New process mappers
    - Support for Platform/LSF environments (v7.0.2 and later)
    - More flexible processing of host lists
    - new mpirun cmd line options and associated functionality

  o Fault-Tolerance Features
    - Asynchronous, transparent checkpoint/restart support
      - Fully coordinated checkpoint/restart coordination component
      - Support for the following checkpoint/restart services:
        - blcr: Berkeley Lab's Checkpoint/Restart
        - self: Application level callbacks
      - Support for the following interconnects:
        - tcp
        - mx
        - openib 
        - sm
        - self
    - Improved Message Logging

  o MPI_THREAD_MULTIPLE support for point-to-point messaging in the
    following BTLs (note that only MPI point-to-point messaging API
    functions support MPI_THREAD_MULTIPLE; other API functions likely
    do not):
    - tcp
    - sm
    - mx
    - elan
    - self

  o Point-to-point Messaging Layer (PML) improvements
    - Memory footprint reduction
    - Improved latency
    - Improved algorithm for multiple communication device
      ("multi-rail") support

  o Numerous Open Fabrics improvements/enhancements
    - Added iWARP support (including RDMA CM)
    - Memory footprint and performance improvements
      - "Bucket" SRQ support for better registered memory utilization
      - XRC/ConnectX support
      - Message coalescing
    - Improved error report mechanism with Asynchronous events
    - Automatic Path Migration (APM)
    - Improved processor/port binding
    - Infrastructure for additional wireup strategies
    - mpi_leave_pinned is now enabled by default

  o uDAPL BTL enhancements
    - Multi-rail support
    - Subnet checking
    - Interface include/exclude capabilities

  o  Processor affinity
    - Linux processor affinity improvements
    - Core/socket <--> process mappings

  o Collectives
    - Performance improvements
    - Support for hierarchical collectives (must be activated
      manually; see below)
	- Support for Mellanox FCA (Fabric Collective Accelerator) technology

  o Miscellaneous
    - MPI 2.1 compliant 
    - Sparse process groups and communicators
    - Support for Cray Compute Node Linux (CNL)
    - One-sided RDMA component (BTL-level based rather than PML-level
      based)
    - Aggregate MCA parameter sets
    - MPI handle debugging
    - Many small improvements to the MPI C++ bindings
    - Valgrind support
    - VampirTrace support
    - Updated ROMIO to the version from MPICH2 1.0.7
    - Removed the mVAPI IB stacks
    - Display most error messages only once (vs. once for each
      process)
    - Many other small improvements and bug fixes, too numerous to
      list here
    - Mellanox MXM MTL layer implementation

Known issues
------------

  o MPI_REDUCE_SCATTER does not work with counts of 0.
    https://svn.open-mpi.org/trac/ompi/ticket/1559

  o Please also see the Open MPI bug tracker for bugs beyond this release.
    https://svn.open-mpi.org/trac/ompi/report

===========================================================================

The following abbreviated list of release notes applies to this code
base as of this writing (5 October 2010):

General notes
-------------

- Open MPI includes support for a wide variety of supplemental
  hardware and software package.  When configuring Open MPI, you may
  need to supply additional flags to the "configure" script in order
  to tell Open MPI where the header files, libraries, and any other
  required files are located.  As such, running "configure" by itself
  may not include support for all the devices (etc.) that you expect,
  especially if their support headers / libraries are installed in
  non-standard locations.  Network interconnects are an easy example
  to discuss -- Myrinet and OpenFabrics networks, for example, both
  have supplemental headers and libraries that must be found before
  Open MPI can build support for them.  You must specify where these
  files are with the appropriate options to configure.  See the
  listing of configure command-line switches, below, for more details.

- The majority of Open MPI's documentation is here in this file, the
  included man pages, and on the web site FAQ
  (http://www.open-mpi.org/).  This will eventually be supplemented
  with cohesive installation and user documentation files.

- Note that Open MPI documentation uses the word "component"
  frequently; the word "plugin" is probably more familiar to most
  users.  As such, end users can probably completely substitute the
  word "plugin" wherever you see "component" in our documentation.
  For what it's worth, we use the word "component" for historical
  reasons, mainly because it is part of our acronyms and internal API
  functionc calls.

- The run-time systems that are currently supported are:
  - rsh / ssh
  - LoadLeveler
  - PBS Pro, Open PBS, Torque
  - Platform LSF (v7.0.2 and later)
  - SLURM
  - Cray XT-3 and XT-4
  - Sun Grid Engine (SGE) 6.1, 6.2 and open source Grid Engine
  - Microsoft Windows CCP (Microsoft Windows server 2003 and 2008)

- Systems that have been tested are:
  - Linux (various flavors/distros), 32 bit, with gcc, and Sun Studio 12
  - Linux (various flavors/distros), 64 bit (x86), with gcc, Absoft,
    Intel, Portland, Pathscale, and Sun Studio 12 compilers (*)
  - OS X (10.5, 10.6, 10.7), 32 and 64 bit (x86_64), with gcc
    and Absoft compilers (*).
  - Solaris 10 update 2, 3 and 4, 32 and 64 bit (SPARC, i386, x86_64),
    with Sun Studio 10, 11 and 12

  (*) Be sure to read the Compiler Notes, below.

- Other systems have been lightly (but not fully tested):
  - Other 64 bit platforms (e.g., Linux on PPC64)
  - Microsoft Windows CCP (Microsoft Windows server 2003 and 2008);
    see the README.WINDOWS file.

Compiler Notes
--------------

- Mixing compilers from different vendors when building Open MPI
  (e.g., using the C/C++ compiler from one vendor and the F77/F90
  compiler from a different vendor) has been successfully employed by
  some Open MPI users (discussed on the Open MPI user's mailing list),
  but such configurations are not tested and not documented.  For
  example, such configurations may require additional compiler /
  linker flags to make Open MPI build properly.

- Open MPI does not support the Sparc v8 CPU target.  However,
  as of Solaris Studio 12.1,  and later compilers, one should not 
  specify -xarch=v8plus or -xarch=v9.  The use of the options
  -m32 and -m64 for producing 32 and 64 bit targets, respectively,
  are now preferred by the Solaris Studio compilers.

- It has been noticed that if one uses CXX=sunCC, in which sunCC
  is a link in the Solaris Studio compiler release, that the OMPI 
  build system has issue with sunCC and does not build libmpi_cxx.so.
  Therefore  the make install fails.  So we suggest that one should
  use CXX=CC, which works, instead of CXX=sunCC.

- If one tries to build OMPI on Ubuntu with Solaris Studio using the C++
  compiler and the -m32 option  you might see a warning:
  "CC: Warning: failed to detect system linker version, falling back to
   custom linker usage"
  Then the build will fail.  One can overcome this error by either 
  setting LD_LIBRARY_PATH to the location of the 32 bit libraries (most
  likely /lib32) or giving LDFLAGS="-L/lib32 -R/lib32" to the configure
  command.  Officially Solaris Studio is not supported on Ubuntu Linux
  distributions so additional problems might be incurred.

- At least some versions of the Intel 8.1 compiler seg fault while
  compiling certain Open MPI source code files.  As such, it is not
  supported.

- The Intel 9.0 v20051201 compiler on IA64 platforms seems to have a
  problem with optimizing the ptmalloc2 memory manager component (the
  generated code will segv).  As such, the ptmalloc2 component will
  automatically disable itself if it detects that it is on this
  platform/compiler combination.  The only effect that this should
  have is that the MCA parameter mpi_leave_pinned will be inoperative.

- Early versions of the Intel 12.1 Linux compiler suite on x86_64 seem
  to have a bug that prevents Open MPI from working.  Symptoms
  including immediate segv of the wrapper compilers (e.g., mpicc) and
  MPI applications.  As of 1 Feb 2012, if you upgrade to the latest
  version of the Intel 12.1 Linux compiler suite, the problem will go
  away.

- Early versions of the Portland Group 6.0 compiler have problems
  creating the C++ MPI bindings as a shared library (e.g., v6.0-1).
  Tests with later versions show that this has been fixed (e.g.,
  v6.0-5).

- The Portland Group compilers prior to version 7.0 require the
  "-Msignextend" compiler flag to extend the sign bit when converting
  from a shorter to longer integer.  This is is different than other
  compilers (such as GNU).  When compiling Open MPI with the Portland
  compiler suite, the following flags should be passed to Open MPI's
  configure script:

  shell$ ./configure CFLAGS=-Msignextend CXXFLAGS=-Msignextend \
	--with-wrapper-cflags=-Msignextend \
	--with-wrapper-cxxflags=-Msignextend ...

  This will both compile Open MPI with the proper compile flags and
  also automatically add "-Msignextend" when the C and C++ MPI wrapper
  compilers are used to compile user MPI applications.

- Using the MPI C++ bindings with the Pathscale compiler is known
  to fail, possibly due to Pathscale compiler issues.

- Using the Absoft compiler to build the MPI Fortran bindings on Suse
  9.3 is known to fail due to a Libtool compatibility issue.

- Open MPI will build bindings suitable for all common forms of
  Fortran 77 compiler symbol mangling on platforms that support it
  (e.g., Linux).  On platforms that do not support weak symbols (e.g.,
  OS X), Open MPI will build Fortran 77 bindings just for the compiler
  that Open MPI was configured with.  

  Hence, on platforms that support it, if you configure Open MPI with
  a Fortran 77 compiler that uses one symbol mangling scheme, you can
  successfully compile and link MPI Fortran 77 applications with a
  Fortran 77 compiler that uses a different symbol mangling scheme.

  NOTE: For platforms that support the multi-Fortran-compiler bindings
  (i.e., weak symbols are supported), due to limitations in the MPI
  standard and in Fortran compilers, it is not possible to hide these
  differences in all cases.  Specifically, the following two cases may
  not be portable between different Fortran compilers:

  1. The C constants MPI_F_STATUS_IGNORE and MPI_F_STATUSES_IGNORE
     will only compare properly to Fortran applications that were
     created with Fortran compilers that that use the same
     name-mangling scheme as the Fortran compiler that Open MPI was
     configured with.

  2. Fortran compilers may have different values for the logical
     .TRUE. constant.  As such, any MPI function that uses the Fortran
     LOGICAL type may only get .TRUE. values back that correspond to
     the the .TRUE. value of the Fortran compiler that Open MPI was
     configured with.  Note that some Fortran compilers allow forcing
     .TRUE. to be 1 and .FALSE. to be 0.  For example, the Portland
     Group compilers provide the "-Munixlogical" option, and Intel
     compilers (version >= 8.) provide the "-fpscomp logicals" option.

  You can use the ompi_info command to see the Fortran compiler that
  Open MPI was configured with.

- The Fortran 90 MPI bindings can now be built in one of three sizes
  using --with-mpi-f90-size=SIZE (see description below).  These sizes
  reflect the number of MPI functions included in the "mpi" Fortran 90
  module and therefore which functions will be subject to strict type
  checking.  All functions not included in the Fortran 90 module can
  still be invoked from F90 applications, but will fall back to
  Fortran-77 style checking (i.e., little/none).

  - trivial: Only includes F90-specific functions from MPI-2.  This
    means overloaded versions of MPI_SIZEOF for all the MPI-supported
    F90 intrinsic types.

  - small (default): All the functions in "trivial" plus all MPI
    functions that take no choice buffers (meaning buffers that are
    specified by the user and are of type (void*) in the C bindings --
    generally buffers specified for message passing).  Hence,
    functions like MPI_COMM_RANK are included, but functions like
    MPI_SEND are not.

  - medium: All the functions in "small" plus all MPI functions that
    take one choice buffer (e.g., MPI_SEND, MPI_RECV, ...).  All
    one-choice-buffer functions have overloaded variants for each of
    the MPI-supported Fortran intrinsic types up to the number of
    dimensions specified by --with-f90-max-array-dim (default value is
    4).

  Increasing the size of the F90 module (in order from trivial, small,
  and medium) will generally increase the length of time required to
  compile user MPI applications.  Specifically, "trivial"- and
  "small"-sized F90 modules generally allow user MPI applications to
  be compiled fairly quickly but lose type safety for all MPI
  functions with choice buffers.  "medium"-sized F90 modules generally
  take longer to compile user applications but provide greater type
  safety for MPI functions.

  Note that MPI functions with two choice buffers (e.g., MPI_GATHER)
  are not currently included in Open MPI's F90 interface.  Calls to
  these functions will automatically fall through to Open MPI's F77
  interface.  A "large" size that includes the two choice buffer MPI
  functions is possible in future versions of Open MPI.


General Run-Time Support Notes
------------------------------

- The Open MPI installation must be in your PATH on all nodes (and
  potentially LD_LIBRARY_PATH, if libmpi is a shared library), unless
  using the --prefix or --enable-mpirun-prefix-by-default
  functionality (see below).

- Open MPI's run-time behavior can be customized via MCA ("MPI
  Component Architecture") parameters (see below for more information
  on how to get/set MCA parameter values).  Some MCA parameters can be
  set in a way that renders Open MPI inoperable (see notes about MCA
  parameters later in this file).  In particular, some parameters have
  required options that must be included.

  - If specified, the "btl" parameter must include the "self"
    component, or Open MPI will not be able to deliver messages to the
    same rank as the sender.  For example: "mpirun --mca btl tcp,self
    ..."
  - If specified, the "btl_tcp_if_exclude" paramater must include the
    loopback device ("lo" on many Linux platforms), or Open MPI will
    not be able to route MPI messages using the TCP BTL.  For example:
    "mpirun --mca btl_tcp_if_exclude lo,eth1 ..."

- Running on nodes with different endian and/or different datatype
  sizes within a single parallel job is supported in this release.
  However, Open MPI does not resize data when datatypes differ in size
  (for example, sending a 4 byte MPI_DOUBLE and receiving an 8 byte
  MPI_DOUBLE will fail).


MPI Functionality and Features
------------------------------

- All MPI-2.1 functionality is supported.

- MPI_THREAD_MULTIPLE support is included, but is only lightly tested.
  It likely does not work for thread-intensive applications.  Note
  that *only* the MPI point-to-point communication functions for the
  BTL's listed earlier (search for "MPI_THREAD_MULTIPLE support") are
  considered thread safe.  Other support functions (e.g., MPI attributes)
  have not been certified as safe when simultaneously used by multiple
  threads.

  Note that Open MPI's thread support is in a fairly early stage; the
  above devices are likely to *work*, but the latency is likely to be
  fairly high.  Specifically, efforts so far have concentrated on
  *correctness*, not *performance* (yet).

- MPI_REAL16 and MPI_COMPLEX32 are only supported on platforms where a
  portable C datatype can be found that matches the Fortran type
  REAL*16, both in size and bit representation.

- The "libompitrace" library is bundled in Open MPI and is installed
  by default (it can be disabled via the --disable-libompitrace
  flag).  This library provides a simplistic tracing of select MPI
  function calls via the MPI profiling interface.  Linking it in to
  your appliation via (e.g., via -lompitrace) will automatically
  output to stderr when some MPI functions are invoked:

  $ mpicc hello_world.c -o hello_world -lompitrace
  $ mpirun -np 1 hello_world.c
  MPI_INIT: argc 1
  Hello, world, I am 0 of 1
  MPI_BARRIER[0]: comm MPI_COMM_WORLD
  MPI_FINALIZE[0]
  $

  Keep in mind that the output from the trace library is going to
  stderr, so it may output in a slightly different order than the
  stdout from your application.

  This library is being offered as a "proof of concept" / convenience
  from Open MPI.  If there is interest, it is trivially easy to extend
  it to printf for other MPI functions.  Patches and/or suggestions
  would be greatfully appreciated on the Open MPI developer's list.

Collectives
-----------

- The "hierarch" coll component (i.e., an implementation of MPI
  collective operations) attempts to discover network layers of
  latency in order to segregate individual "local" and "global"
  operations as part of the overall collective operation.  In this
  way, network traffic can be reduced -- or possibly even minimized
  (similar to MagPIe).  The current "hierarch" component only
  separates MPI processes into on- and off-node groups.

  Hierarch has had sufficient correctness testing, but has not
  received much performance tuning.  As such, hierarch is not
  activated by default -- it must be enabled manually by setting its
  priority level to 100:

    mpirun --mca coll_hierarch_priority 100 ...

  We would appreciate feedback from the user community about how well
  hierarch works for your applications.

- The "fca" coll component: Mellanox Fabric Collective Accelerator (FCA) 
  is a solution for offloading collective operations from the MPI process 
  onto Mellanox QDR InfiniBand switch CPUs and HCAs. 



Network Support
---------------

- The OpenFabrics Enterprise Distribution (OFED) software package v1.0
  will not work properly with Open MPI v1.2 (and later) due to how its
  Mellanox InfiniBand plugin driver is created.  The problem is fixed
  OFED v1.1 (and later).

- Older mVAPI-based InfiniBand drivers (Mellanox VAPI) are no longer
  supported.  Please use an older version of Open MPI (1.2 series or
  earlier) if you need mVAPI support.

- The use of fork() with the openib BTL is only partially supported,
  and only on Linux kernels >= v2.6.15 with libibverbs v1.1 or later
  (first released as part of OFED v1.2), per restrictions imposed by
  the OFED network stack.

- There are three MPI network models available: "ob1", "csum", and
  "cm".  "ob1" and "csum" use BTL ("Byte Transfer Layer") components
  for each supported network.  "cm" uses MTL ("Matching Tranport
  Layer") components for each supported network.

  - "ob1" supports a variety of networks that can be used in
    combination with each other (per OS constraints; e.g., there are
    reports that the GM and OpenFabrics kernel drivers do not operate
    well together):
    - OpenFabrics: InfiniBand and iWARP
    - Loopback (send-to-self)
    - Myrinet: GM and MX (including Open-MX)
    - Portals
    - Quadrics Elan
    - Shared memory
    - TCP
    - SCTP
    - uDAPL

  - "csum" is exactly the same as "ob1", except that it performs
    additional data integrity checks to ensure that the received data
    is intact (vs. trusting the underlying network to deliver the data
    correctly).  csum supports all the same networks as ob1, but there
    is a performance penalty for the additional integrity checks.

  - "cm" supports a smaller number of networks (and they cannot be
    used together), but may provide better better overall MPI
    performance:
    - Myrinet MX (including Open-MX, but not GM)
    - InfiniPath PSM
    - Mellanox MXM
    - Portals

  Open MPI will, by default, choose to use "cm" when the InfiniPath
  PSM or the Mellanox MXM MTL can be used.  Otherwise, "ob1" will be
  used and the corresponding BTLs will be selected.  "csum" will never
  be selected by default.  Users can force the use of ob1 or cm if
  desired by setting the "pml" MCA parameter at run-time:

    shell$ mpirun --mca pml ob1 ...
    or
    shell$ mpirun --mca pml csum ...
    or
    shell$ mpirun --mca pml cm ...

- MXM is a MellanoX Messaging library (unreleased yet) utilizing full range 
  of IB transports to provide the following messaging services to the upper 
  level MPI:
  - Usage of all available IB transports 
  - Native RDMA support
  - Progress thread
  - Shared memory communication
  - hardware assisted reliability
  - MXM supports all HCAs that are being supported under Open MPI.

- Myrinet MX (and Open-MX) support is shared between the 2 internal
  devices, the MTL and the BTL.  The design of the BTL interface in
  Open MPI assumes that only naive one-sided communication
  capabilities are provided by the low level communication layers.
  However, modern communication layers such as Myrinet MX, InfiniPath
  PSM, or Portals, natively implement highly-optimized two-sided
  communication semantics.  To leverage these capabilities, Open MPI
  provides the "cm" PML and corresponding MTL components to transfer
  messages rather than bytes.  The MTL interface implements a shorter
  code path and lets the low-level network library decide which
  protocol to use (depending on issues such as message length,
  internal resources and other parameters specific to the underlying
  interconnect).  However, Open MPI cannot currently use multiple MTL
  modules at once.  In the case of the MX MTL, process loopback and
  on-node shared memory communications are provided by the MX library.
  Moreover, the current MX MTL does not support message pipelining
  resulting in lower performances in case of non-contiguous
  data-types.

  The "ob1" and "csum" PMLs and BTL components use Open MPI's internal
  on-node shared memory and process loopback devices for high
  performance.  The BTL interface allows multiple devices to be used
  simultaneously.  For the MX BTL it is recommended that the first
  segment (which is as a threshold between the eager and the
  rendezvous protocol) should always be at most 4KB, but there is no
  further restriction on the size of subsequent fragments.

  The MX MTL is recommended in the common case for best performance on
  10G hardware when most of the data transfers cover contiguous memory
  layouts.  The MX BTL is recommended in all other cases, such as when
  using multiple interconnects at the same time (including TCP), or
  transferring non contiguous data-types.

- Linux "knem" support is used when the "sm" (shared memory) BTL is
  compiled with knem support (see the --with-knem configure option)
  and the knem Linux module is loaded in the running kernel.  If the
  knem Linux kernel module is not loaded, the knem support is (by
  default) silently deactivated during Open MPI jobs.

  See http://runtime.bordeaux.inria.fr/knem/ for details on Knem.

Open MPI Extensions
-------------------

- Extensions framework added.  See the "Open MPI API Extensions"
  section below for more information on compiling and using
  extensions.

- The following extensions are included in this version of Open MPI:

  - affinity: Provides the OMPI_Affinity_str() routine on retrieving
    a string that contains what resources a process is bound to.  See
    its man page for more details.
  - cr: Provides routines to access to checkpoint restart routines.
    See ompi/mpiext/cr/mpiext_cr_c.h for a listing of availble
    functions.
  - example: A non-functional extension; its only purpose is to
    provide an example for how to create other extensions.

===========================================================================

Building Open MPI
-----------------

Open MPI uses a traditional configure script paired with "make" to
build.  Typical installs can be of the pattern:

---------------------------------------------------------------------------
shell$ ./configure [...options...]
shell$ make all install
---------------------------------------------------------------------------

There are many available configure options (see "./configure --help"
for a full list); a summary of the more commonly used ones follows:

--prefix=<directory>
  Install Open MPI into the base directory named <directory>.  Hence,
  Open MPI will place its executables in <directory>/bin, its header
  files in <directory>/include, its libraries in <directory>/lib, etc.

--with-elan=<directory>
  Specify the directory where the Quadrics Elan library and header
  files are located.  This option is generally only necessary if the
  Elan headers and libraries are not in default compiler/linker
  search paths.

  Elan is the support library for Quadrics-based networks.

--with-elan-libdir=<directory>
  Look in directory for the Quadrics Elan libraries.  By default, Open
  MPI will look in <elan directory>/lib and <elan directory>/lib64,
  which covers most cases.  This option is only needed for special
  configurations.

--with-gm=<directory>
  Specify the directory where the GM libraries and header files are
  located.  This option is generally only necessary if the GM headers
  and libraries are not in default compiler/linker search paths.

  GM is the support library for older Myrinet-based networks (GM has
  been obsoleted by MX).

--with-gm-libdir=<directory>
  Look in directory for the GM libraries.  By default, Open MPI will
  look in <gm directory>/lib and <gm directory>/lib64, which covers
  most cases.  This option is only needed for special configurations.

--with-hwloc=<location>
  Build hwloc support.  If <location> is "internal", Open MPI's
  internal copy of hwloc is used.  If <location> is "external", Open
  MPI will search in default locations for an hwloc installation.
  Finally, if <location> is a directory, that directory will be
  searched for a valid hwloc installation, just like other
  --with-FOO=<directory> configure options.

  hwloc is a support library that provides processor and memory
  affinity information for NUMA platforms.

--with-hwloc-libdir=<directory>

  Look in directory for the hwloc libraries.  This option is only
  usable when building Open MPI against an external hwloc
  installation.  Just like other --with-FOO-libdir configure options,
  this option is only needed for special configurations.

--with-knem=<directory>
  Specify the directory where the knem libraries and header files are
  located.  This option is generally only necessary if the kenm headers
  and libraries are not in default compiler/linker search paths.

  kenm is a Linux kernel module that allows direct process-to-process
  memory copies (optionally using hardware offload), potentially
  increasing bandwidth for large messages sent between messages on the
  same server.  See http://runtime.bordeaux.inria.fr/knem/ for
  details.

--with-mx=<directory>
  Specify the directory where the MX libraries and header files are
  located.  This option is generally only necessary if the MX headers
  and libraries are not in default compiler/linker search paths.

  MX is the support library for Myrinet-based networks.  An open
  source software package named Open-MX provides the same
  functionality on Ethernet-based clusters (Open-MX can provide
  MPI performance improvements compared to TCP messaging).

--with-mx-libdir=<directory>
  Look in directory for the MX libraries.  By default, Open MPI will
  look in <mx directory>/lib and <mx directory>/lib64, which covers
  most cases.  This option is only needed for special configurations.

--with-openib=<directory>
  Specify the directory where the OpenFabrics (previously known as
  OpenIB) libraries and header files are located.  This option is
  generally only necessary if the OpenFabrics headers and libraries
  are not in default compiler/linker search paths.

  "OpenFabrics" refers to iWARP- and InifiniBand-based networks.

--with-openib-libdir=<directory>
  Look in directory for the OpenFabrics libraries.  By default, Open
  MPI will look in <openib directory>/lib and <openib
  directory>/lib64, which covers most cases.  This option is only
  needed for special configurations.

--with-portals=<directory>
  Specify the directory where the Portals libraries and header files
  are located.  This option is generally only necessary if the Portals
  headers and libraries are not in default compiler/linker search
  paths.

  Portals is the support library for Cray interconnects, but is also
  available on other platforms (e.g., there is a Portals library
  implemented over regular TCP).

--with-portals-config=<type>
  Configuration to use for Portals support. The following <type>
  values are possible: "utcp", "xt3", "xt3-modex" (default: utcp).

--with-portals-libs=<libs>
  Additional libraries to link with for Portals support.

--with-psm=<directory>
  Specify the directory where the QLogic InfiniPath PSM library and
  header files are located.  This option is generally only necessary
  if the InfiniPath headers and libraries are not in default
  compiler/linker search paths.

  PSM is the support library for QLogic InfiniPath network adapters.

--with-psm-libdir=<directory>
  Look in directory for the PSM libraries.  By default, Open MPI will
  look in <psm directory>/lib and <psm directory>/lib64, which covers
  most cases.  This option is only needed for special configurations.

--with-mxm=<directory>
  Specify the directory where the Mellanox MXM library and header
  files are located.  This option is generally only necessary if the
  MXM headers and libraries are not in default compiler/linker search
  paths.

  MXM is the support library for Mellanox Network adapters.

--with-mxm-libdir=<directory>
  Look in directory for the MXM libraries.  By default, Open MPI will
  look in <mxm directory>/lib and <mxm directory>/lib64, which covers
  most cases.  This option is only needed for special configurations.

--with-sctp=<directory>
  Specify the directory where the SCTP libraries and header files are
  located.  This option is generally only necessary if the SCTP headers
  and libraries are not in default compiler/linker search paths.

  SCTP is a special network stack over ethernet networks.

--with-sctp-libdir=<directory>
  Look in directory for the SCTP libraries.  By default, Open MPI will
  look in <sctp directory>/lib and <sctp directory>/lib64, which covers
  most cases.  This option is only needed for special configurations.

--with-udapl=<directory>
  Specify the directory where the UDAPL libraries and header files are
  located.  Note that UDAPL support is disabled by default on Linux;
  the --with-udapl flag must be specified in order to enable it.
  Specifying the directory argument is generally only necessary if the
  UDAPL headers and libraries are not in default compiler/linker
  search paths.

  UDAPL is the support library for high performance networks in Sun
  HPC ClusterTools and on Linux OpenFabrics networks (although the
  "openib" options are preferred for Linux OpenFabrics networks, not
  UDAPL).

--with-udapl-libdir=<directory>
  Look in directory for the UDAPL libraries.  By default, Open MPI
  will look in <udapl directory>/lib and <udapl directory>/lib64,
  which covers most cases.  This option is only needed for special
  configurations.

--with-lsf=<directory>
  Specify the directory where the LSF libraries and header files are
  located.  This option is generally only necessary if the LSF headers
  and libraries are not in default compiler/linker search paths.

  LSF is a resource manager system, frequently used as a batch
  scheduler in HPC systems.

  NOTE: If you are using LSF version 7.0.5, you will need to add
        "LIBS=-ldl" to the configure command line.  For example:

            ./configure LIBS=-ldl --with-lsf ...

        This workaround should *only* be needed for LSF 7.0.5.

--with-lsf-libdir=<directory>
  Look in directory for the LSF libraries.  By default, Open MPI will
  look in <lsf directory>/lib and <lsf directory>/lib64, which covers
  most cases.  This option is only needed for special configurations.

--with-tm=<directory>
  Specify the directory where the TM libraries and header files are
  located.  This option is generally only necessary if the TM headers
  and libraries are not in default compiler/linker search paths.

  TM is the support library for the Torque and PBS Pro resource
  manager systems, both of which are frequently used as a batch
  scheduler in HPC systems.

--with-sge
  Specify to build support for the Sun Grid Engine (SGE) resource
  manager.  SGE support is disabled by default; this option must be
  specified to build OMPI's SGE support.

  The Sun Grid Engine (SGE) is a resource manager system, frequently
  used as a batch scheduler in HPC systems.

--with-esmtp=<directory>

  Specify the directory where the libESMTP libraries and header files are
  located.  This option is generally only necessary of the libESMTP
  headers and libraries are not included in the default
  compiler/linker search paths.

  libESMTP is a support library for sending e-mail.

--with-mpi-param_check(=value)
  "value" can be one of: always, never, runtime.  If --with-mpi-param
  is not specified, "runtime" is the default.  If --with-mpi-param
  is specified with no value, "always" is used.  Using
  --without-mpi-param-check is equivalent to "never".

  - always: the parameters of MPI functions are always checked for
    errors 
  - never: the parameters of MPI functions are never checked for
    errors 
  - runtime: whether the parameters of MPI functions are checked
    depends on the value of the MCA parameter mpi_param_check
    (default: yes).

--with-threads=value
  Since thread support is only partially tested, it is disabled by
  default.  To enable threading, use "--with-threads=posix".  This is
  most useful when combined with --enable-mpi-thread-multiple.

--enable-mpi-thread-multiple
  Allows the MPI thread level MPI_THREAD_MULTIPLE.  See
  --with-threads; this is currently disabled by default. Enabling
  this feature will automatically --enable-opal-multi-threads.

--enable-opal-multi-threads
  Enables thread lock support in the OPAL and ORTE layers. Does
  not enable MPI_THREAD_MULTIPLE - see above option for that feature.
  This is currently disabled by default.

--with-fca=<directory>
  Specify the directory where the Mellanox FCA library and
  header files are located.  

  FCA is the support library for Mellanox QDR switches and HCAs.

--disable-mpi-cxx
  Disable building the C++ MPI bindings.  Note that this does *not*
  disable the C++ checks during configure; some of Open MPI's tools
  are written in C++ and therefore require a C++ compiler to be built.

--disable-mpi-cxx-seek
  Disable the MPI::SEEK_* constants.  Due to a problem with the MPI-2
  specification, these constants can conflict with system-level SEEK_*
  constants.  Open MPI attempts to work around this problem, but the
  workaround may fail in some esoteric situations.  The
  --disable-mpi-cxx-seek switch disables Open MPI's workarounds (and
  therefore the MPI::SEEK_* constants will be unavailable).

--disable-mpi-f77
  Disable building the Fortran 77 MPI bindings.

--disable-mpi-f90
  Disable building the Fortran 90 MPI bindings.  Also related to the
  --with-f90-max-array-dim and --with-mpi-f90-size options.

--with-mpi-f90-size=<SIZE>
  Three sizes of the MPI F90 module can be built: trivial (only a
  handful of MPI-2 F90-specific functions are included in the F90
  module), small (trivial + all MPI functions that take no choice
  buffers), and medium (small + all MPI functions that take 1 choice
  buffer).  This parameter is only used if the F90 bindings are
  enabled.

--with-f90-max-array-dim=<DIM>
  The F90 MPI bindings are strictly typed, even including the number of
  dimensions for arrays for MPI choice buffer parameters.  Open MPI
  generates these bindings at compile time with a maximum number of
  dimensions as specified by this parameter.  The default value is 4.

--enable-mpi-ext(=<list>)
  Enable Open MPI's non-portable API extensions.  If no <list> is
  specified, all of the extensions are enabled.

  See "Open MPI API Extensions", below, for more details.

--enable-mpirun-prefix-by-default
  This option forces the "mpirun" command to always behave as if
  "--prefix $prefix" was present on the command line (where $prefix is
  the value given to the --prefix option to configure).  This prevents
  most rsh/ssh-based users from needing to modify their shell startup
  files to set the PATH and/or LD_LIBRARY_PATH for Open MPI on remote
  nodes.  Note, however, that such users may still desire to set PATH
  -- perhaps even in their shell startup files -- so that executables
  such as mpicc and mpirun can be found without needing to type long
  path names.  --enable-orterun-prefix-by-default is a synonym for
  this option.

--disable-shared
  By default, libmpi is built as a shared library, and all components
  are built as dynamic shared objects (DSOs).  This switch disables
  this default; it is really only useful when used with
  --enable-static.  Specifically, this option does *not* imply
  --enable-static; enabling static libraries and disabling shared
  libraries are two independent options.

--enable-static
  Build libmpi as a static library, and statically link in all
  components.  Note that this option does *not* imply
  --disable-shared; enabling static libraries and disabling shared
  libraries are two independent options.

--enable-sparse-groups
  Enable the usage of sparse groups. This would save memory
  significantly especially if you are creating large
  communicators. (Disabled by default)

--enable-peruse
  Enable the PERUSE MPI data analysis interface.

--enable-dlopen
  Build all of Open MPI's components as standalone Dynamic Shared
  Objects (DSO's) that are loaded at run-time.  The opposite of this
  option, --disable-dlopen, causes two things: 

  1. All of Open MPI's components will be built as part of Open MPI's
     normal libraries (e.g., libmpi).  
  2. Open MPI will not attempt to open any DSO's at run-time.

  Note that this option does *not* imply that OMPI's libraries will be
  built as static objects (e.g., libmpi.a).  It only specifies the
  location of OMPI's components: standalone DSOs or folded into the
  Open MPI libraries.  You can control whenther Open MPI's libraries
  are build as static or dynamic via --enable|disable-static and
  --enable|disable-shared.

--with-libltdl[=VALUE]
  This option specifies where to find the GNU Libtool libltdl support
  library.  The following VALUEs are permitted:

    internal:    Use Open MPI's internal copy of libltdl.
    external:    Use an external libltdl installation (rely on default
                 compiler and linker paths to find it)
    <no value>:  Same as "internal".
    <directory>: Specify the localtion of a specific libltdl
                 installation to use

  By default (or if --with-libltdl is specified with no VALUE), Open
  MPI will build and use the copy of libltdl that it has in its source
  tree.  However, if the VALUE is "external", Open MPI will look for
  the relevant libltdl header file and library in default compiler /
  linker locations.  Or, VALUE can be a directory tree where the
  libltdl header file and library can be found.  This option allows
  operating systems to include Open MPI and use their default libltdl
  installation instead of Open MPI's bundled libltdl.

  Note that this option is ignored if --disable-dlopen is specified.

--enable-heterogeneous
  Enable support for running on heterogeneous clusters (e.g., machines
  with different endian representations).  Heterogeneous support is
  disabled by default because it imposes a minor performance penalty.

--disable-libompitrace
  Disable building the simple "libompitrace" library (see note above
  about libompitrace)

--disable-vt
  Disable building VampirTrace.

--enable-contrib-no-build=<list>
  <list> is a comma-delimited list of the Open MPI contributed
  software packages (e.g., libompitrace, VampirTrace) to disable.

  Using this form is exactly equivalent to the contributed packages'
  --disable-<name> form; this form may be slightly more compact if
  disabling multiple packages.

--disable-sysv
  Disable System V (sysv) shared memory support.  By default, System V
  shared memory support is enabled.

--disable-posix-shmem
  Disable POSIX shared memory support.  By default, POSIX shared memory support
  is enabled.

--with-wrapper-cflags=<cflags>
--with-wrapper-cxxflags=<cxxflags>
--with-wrapper-fflags=<fflags>
--with-wrapper-fcflags=<fcflags>
--with-wrapper-ldflags=<ldflags>
--with-wrapper-libs=<libs>
  Add the specified flags to the default flags that used are in Open
  MPI's "wrapper" compilers (e.g., mpicc -- see below for more
  information about Open MPI's wrapper compilers).  By default, Open
  MPI's wrapper compilers use the same compilers used to build Open
  MPI and specify an absolute minimum set of additional flags that are
  necessary to compile/link MPI applications.  These configure options
  give system administrators the ability to embed additional flags in
  OMPI's wrapper compilers (which is a local policy decision).  The
  meanings of the different flags are:

  <cflags>: Flags passed by the mpicc wrapper to the C compiler
  <cxxflags>: Flags passed by the mpic++ wrapper to the C++ compiler
  <fflags>: Flags passed by the mpif77 wrapper to the F77 compiler
  <fcflags>: Flags passed by the mpif90 wrapper to the F90 compiler
  <ldflags>: Flags passed by all the wrappers to the linker
  <libs>: Flags passed by all the wrappers to the linker

  There are other ways to configure Open MPI's wrapper compiler
  behavior; see the Open MPI FAQ for more information.

There are many other options available -- see "./configure --help".

Changing the compilers that Open MPI uses to build itself uses the
standard Autoconf mechanism of setting special environment variables
either before invoking configure or on the configure command line.
The following environment variables are recognized by configure:

CC          - C compiler to use
CFLAGS      - Compile flags to pass to the C compiler
CPPFLAGS    - Preprocessor flags to pass to the C compiler

CXX         - C++ compiler to use
CXXFLAGS    - Compile flags to pass to the C++ compiler
CXXCPPFLAGS - Preprocessor flags to pass to the C++ compiler

F77         - Fortran 77 compiler to use
FFLAGS      - Compile flags to pass to the Fortran 77 compiler

FC          - Fortran 90 compiler to use
FCFLAGS     - Compile flags to pass to the Fortran 90 compiler

LDFLAGS     - Linker flags to pass to all compilers
LIBS        - Libraries to pass to all compilers (it is rarely
              necessary for users to need to specify additional LIBS)

For example:

shell$ ./configure CC=mycc CXX=myc++ F77=myf77 F90=myf90 ...

***Note: We generally suggest using the above command line form for
   setting different compilers (vs. setting environment variables and
   then invoking "./configure").  The above form will save all
   variables and values in the config.log file, which makes
   post-mortem analysis easier when problems occur.

Note that you may also want to ensure that the value of
LD_LIBRARY_PATH is set appropriately (or not at all) for your build
(or whatever environment variable is relevant for your operating
system).  For example, some users have been tripped up by setting to
use non-default Fortran compilers via FC / F77, but then failing to
set LD_LIBRARY_PATH to include the directory containing that
non-default Fortran compiler's support libraries.  This causes Open
MPI's configure script to fail when it tries to compile / link / run
simple Fortran programs. 

It is required that the compilers specified be compile and link
compatible, meaning that object files created by one compiler must be
able to be linked with object files from the other compilers and
produce correctly functioning executables.

Open MPI supports all the "make" targets that are provided by GNU
Automake, such as:

all       - build the entire Open MPI package
install   - install Open MPI
uninstall - remove all traces of Open MPI from the $prefix
clean     - clean out the build tree

Once Open MPI has been built and installed, it is safe to run "make
clean" and/or remove the entire build tree.

VPATH and parallel builds are fully supported.

Generally speaking, the only thing that users need to do to use Open
MPI is ensure that <prefix>/bin is in their PATH and <prefix>/lib is
in their LD_LIBRARY_PATH.  Users may need to ensure to set the PATH
and LD_LIBRARY_PATH in their shell setup files (e.g., .bashrc, .cshrc)
so that non-interactive rsh/ssh-based logins will be able to find the
Open MPI executables.

===========================================================================

Open MPI Version Numbers and Binary Compatibility
-------------------------------------------------

Open MPI has two sets of version numbers that are likely of interest
to end users / system administrator:

    * Software version number
    * Shared library version numbers

Both are described below, followed by a discussion of application
binary interface (ABI) compatibility implications.

Software Version Number
-----------------------

Open MPI's version numbers are the union of several different values:
major, minor, release, and an optional quantifier.

  * Major: The major number is the first integer in the version string
    (e.g., v1.2.3). Changes in the major number typically indicate a
    significant change in the code base and/or end-user
    functionality. The major number is always included in the version
    number.

  * Minor: The minor number is the second integer in the version
    string (e.g., v1.2.3). Changes in the minor number typically
    indicate a incremental change in the code base and/or end-user
    functionality. The minor number is always included in the version
    number. Starting with Open MPI v1.3.0, the minor release number
    took on additional significance (see this wiki page for more
    details):

    o Even minor release numbers are part of "super-stable"
      release series (e.g., v1.4.0). Releases in super stable series
      are well-tested, time-tested, and mature. Such releases are
      recomended for production sites. Changes between subsequent
      releases in super stable series are expected to be fairly small.
    o Odd minor release numbers are part of "feature" release
      series (e.g., 1.3.7). Releases in feature releases are
      well-tested, but they are not necessarily time-tested or as
      mature as super stable releases. Changes between subsequent
      releases in feature series may be large.

  * Release: The release number is the third integer in the version
    string (e.g., v1.2.3). Changes in the release number typically
    indicate a bug fix in the code base and/or end-user
    functionality. If the release number is 0, it is omitted from the
    version number (e.g., v1.2 has a release number of 0).

  * Quantifier: Open MPI version numbers sometimes have an arbitrary
    string affixed to the end of the version number. Common strings
    include:

    o aX: Indicates an alpha release. X is an integer indicating
      the number of the alpha release (e.g., v1.2.3a5 indicates the
      5th alpha release of version 1.2.3).
    o bX: Indicates a beta release. X is an integer indicating
      the number of the beta release (e.g., v1.2.3b3 indicates the 3rd
      beta release of version 1.2.3).
    o rcX: Indicates a release candidate. X is an integer
      indicating the number of the release candidate (e.g., v1.2.3rc4
      indicates the 4th release candidate of version 1.2.3).
    o rV or hgV: Indicates the Subversion / Mercurial repository
      number string that the release was made from (V is usually an
      integer for Subversion releases and usually a string for
      Mercurial releases). Although all official Open MPI releases are
      tied to a single, specific Subversion or Mercurial repository
      number (which can be obtained from the ompi_info command), only
      some releases have the Subversion / Mercurial repository number
      in the version number. Development snapshot tarballs, for
      example, have the Subversion repository included in the version
      to reflect that they are a development snapshot of an upcoming
      release (e.g., v1.2.3r1234 indicates a development snapshot of
      version 1.2.3 corresponding to Subversion repository number
      1234). 

    Quantifiers may be mixed together -- for example v1.2.3rc7r2345
    indicates a development snapshot of an upcoming 7th release
    candidate for version 1.2.3 corresponding to Subversion repository
    number 2345.

Shared Library Version Number
-----------------------------

Open MPI started using the GNU Libtool shared library versioning
scheme with the release of v1.3.2.

NOTE: Only official releases of Open MPI adhere to this versioning
      scheme. "Beta" releases, release candidates, and nightly
      tarballs, developer snapshots, and Subversion/Mercurial snapshot
      tarballs likely will all have arbitrary/meaningless shared
      library version numbers.

For deep voodoo technical reasons, only the MPI API libraries were
versioned until Open MPI v1.5 was released (i.e., libmpi*so --
libopen-rte.so or libopen-pal.so were not versioned until v1.5).
Please see https://svn.open-mpi.org/trac/ompi/ticket/2092 for more
details.

NOTE: This policy change will cause an ABI incompatibility between MPI
      applications compiled/linked against the Open MPI v1.4 series;
      such applications will not be able to upgrade to the Open MPI
      v1.5 series without re-linking.  Sorry folks!

The GNU Libtool official documentation details how the versioning
scheme works.  The quick version is that the shared library versions
are a triple of integers: (current,revision,age), or "c:r:a".  This
triple is not related to the Open MPI software version number.  There
are six simple rules for updating the values (taken almost verbatim
from the Libtool docs):

 1. Start with version information of "0:0:0" for each shared library.

 2. Update the version information only immediately before a public
    release of your software. More frequent updates are unnecessary,
    and only guarantee that the current interface number gets larger
    faster.

 3. If the library source code has changed at all since the last
    update, then increment revision ("c:r:a" becomes "c:r+1:a").

 4. If any interfaces have been added, removed, or changed since the
    last update, increment current, and set revision to 0.

 5. If any interfaces have been added since the last public release,
    then increment age.

 6. If any interfaces have been removed since the last public release,
    then set age to 0.

Here's how we apply those rules specifically to Open MPI:

 1. The above rules do not apply to MCA components (a.k.a. "plugins");
    MCA component .so versions stay unspecified.

 2. The above rules apply exactly as written to the following
    libraries starting with Open MPI version v1.5 (prior to v1.5,
    libopen-pal and libopen-rte were still at 0:0:0 for reasons
    discussed in bug ticket #2092
    https://svn.open-mpi.org/trac/ompi/ticket/2092):

    * libopen-rte
    * libopen-pal
    * libmca_common_*

 3. The following libraries use a slightly modified version of the
    above rules: rules 4, 5, and 6 only apply to the official MPI
    interfaces (functions, global variables).  The rationale for this
    decision is that the vast majority of our users only care about
    the official/public MPI interfaces; we therefore want the .so
    version number to reflect only changes to the official MPI API.
    Put simply: non-MPI API / internal changes to the
    MPI-application-facing libraries are irrelevant to pure MPI
    applications.

    * libmpi
    * libmpi_f77
    * libmpi_f90
    * libmpi_cxx

 4. Note, however, that libmpi.so can have its "revision" number
    incremented if libopen-rte or libopen-pal change (because these
    two libraries are wholly included in libmpi.so).  Specifically:
    the revision will change, but since we have defined that the only
    relevant API interface in libmpi.so is the official MPI API,
    updates to libopen-rte and libopen-pal do not change the "current"
    or "age" numbers of libmpi.so.

Application Binary Interface (ABI) Compatibility
------------------------------------------------

Open MPI provided forward application binary interface (ABI)
compatibility for MPI applications starting with v1.3.2.  Prior to
that version, no ABI guarantees were provided.  

NOTE: Prior to v1.3.2, subtle and strange failures are almost
      guaranteed to occur if applications were compiled and linked
      against shared libraries from one version of Open MPI and then
      run with another.  The Open MPI team strongly discourages making
      any ABI assumptions before v1.3.2.

Starting with v1.3.2, Open MPI provides forward ABI compatibility in
all versions of a given feature release series and its corresponding
super stable series.  For example, on a single platform, an MPI
application linked against Open MPI v1.3.2 shared libraries can be
updated to point to the shared libraries in any successive v1.3.x or
v1.4 release and still work properly (e.g., via the LD_LIBRARY_PATH
environment variable or other operating system mechanism).

Open MPI reserves the right to break ABI compatibility at new feature
release series.  For example, the same MPI application from above
(linked against Open MPI v1.3.2 shared libraries) will *not* work with
Open MPI v1.5 shared libraries.

===========================================================================

Checking Your Open MPI Installation
-----------------------------------

The "ompi_info" command can be used to check the status of your Open
MPI installation (located in <prefix>/bin/ompi_info).  Running it with
no arguments provides a summary of information about your Open MPI
installation.   

Note that the ompi_info command is extremely helpful in determining
which components are installed as well as listing all the run-time
settable parameters that are available in each component (as well as
their default values).

The following options may be helpful:

--all       Show a *lot* of information about your Open MPI
            installation. 
--parsable  Display all the information in an easily
            grep/cut/awk/sed-able format.
--param <framework> <component>
            A <framework> of "all" and a <component> of "all" will
            show all parameters to all components.  Otherwise, the
            parameters of all the components in a specific framework,
            or just the parameters of a specific component can be
            displayed by using an appropriate <framework> and/or
            <component> name.

Changing the values of these parameters is explained in the "The
Modular Component Architecture (MCA)" section, below.

===========================================================================

Open MPI API Extensions
-----------------------

Open MPI contains a framework for extending the MPI API that is
available to applications.  Each extension is usually a standalone set of
functionality that is distinct from other extensions (similar to how
Open MPI's plugins are usually unrelated to each other).  These
extensions provide new functions and/or constants that are available
to MPI applications.

WARNING: These extensions are neither standard nor portable to other
MPI implementations!

Compiling the extensions
------------------------

Open MPI extensions are not enabled by default; they must be enabled
by Open MPI's configure script.  The --enable-mpi-ext command line
switch accepts a comma-delimited list of extensions to enable, or, if
it is specified without a list, all extensions are enabled.

Since extensions are meant to be used by advanced users only, this
file does not document which extensions are available or what they
do.  Look in the ompi/mpiext/ directory to see the extensions; each
subdirectory of that directory contains an extension.  Each has a
README file that describes what it does.

Using the extensions
--------------------

To reinforce the fact that these extensions are non-standard, you must
include a separate header file after <mpi.h> to obtain the function
prototypes, constant declarations, etc.  For example:

#include <mpi.h>
#if defined(OPEN_MPI) && OPEN_MPI
#include <mpi-ext.h>
#endif

int main() {
    MPI_Init(NULL, NULL);
#if defined(OPEN_MPI) && OPEN_MPI
    {
        char ompi_bound[OMPI_AFFINITY_STRING_MAX];
        char current_binding[OMPI_AFFINITY_STRING_MAX];
        char exists[OMPI_AFFINITY_STRING_MAX];
        OMPI_Affinity_str(OMPI_AFFINITY_LAYOUT_FMT, ompi_bound, current_bindings,
                          exists);
    }
#endif
    MPI_Finalize();
    return 0;
}

Notice that the Open MPI-specific code is surrounded by the #if
statement to ensure that it is only ever compiled by Open MPI.  

The Open MPI wrapper compilers (mpicc and friends) should
automatically insert all relevant compiler and linker flags necessary
to use the extensions.  No special flags or steps should be necessary
compared to "normal" MPI applications.

===========================================================================

Compiling Open MPI Applications
-------------------------------

Open MPI provides "wrapper" compilers that should be used for
compiling MPI applications:

C:          mpicc
C++:        mpiCC (or mpic++ if your filesystem is case-insensitive)
Fortran 77: mpif77
Fortran 90: mpif90

For example:

shell$ mpicc hello_world_mpi.c -o hello_world_mpi -g
shell$

All the wrapper compilers do is add a variety of compiler and linker
flags to the command line and then invoke a back-end compiler.  To be
specific: the wrapper compilers do not parse source code at all; they
are solely command-line manipulators, and have nothing to do with the
actual compilation or linking of programs.  The end result is an MPI
executable that is properly linked to all the relevant libraries.

Customizing the behavior of the wrapper compilers is possible (e.g.,
changing the compiler [not recommended] or specifying additional
compiler/linker flags); see the Open MPI FAQ for more information.

Alternatively, starting in the Open MPI v1.5 series, Open MPI also
installs pkg-config(1) configuration files under $libdir/pkgconfig.
If pkg-config is configured to find these files, then compiling /
linking Open MPI programs can be performed like this:

shell$ gcc hello_world_mpi.c -o hello_world_mpi -g \
            `pkg-config ompi-c --cflags --libs`
shell$

Open MPI supplies multiple pkg-config(1) configuration files; one for
each different wrapper compiler (language):

------------------------------------------------------------------------
ompi       Synonym for "ompi-c"; Open MPI applications using the C
           MPI bindings
ompi-c     Open MPI applications using the C MPI bindings
ompi-cxx   Open MPI applications using the C or C++ MPI bindings
ompi-f77   Open MPI applications using the C or "mpif.h" MPI bindings
ompi-f90   Open MPI applications using the C, "mpif.h" or "use mpi" MPI
           bindings
------------------------------------------------------------------------

The following pkg-config(1) configuration files *may* be installed,
depending on which command line options were specified to Open MPI's
configure script.  They are not necessary for MPI applications, but
may be used by applications that use Open MPI's lower layer support
libraries.

orte:       Open MPI Run-Time Environment applicaions
opal:       Open Portable Access Layer applications

===========================================================================

Running Open MPI Applications
-----------------------------

Open MPI supports both mpirun and mpiexec (they are exactly
equivalent).  For example:

shell$ mpirun -np 2 hello_world_mpi
or
shell$ mpiexec -np 1 hello_world_mpi : -np 1 hello_world_mpi

are equivalent.  Some of mpiexec's switches (such as -host and -arch)
are not yet functional, although they will not error if you try to use
them.  

The rsh launcher accepts a -hostfile parameter (the option
"-machinefile" is equivalent); you can specify a -hostfile parameter
indicating an standard mpirun-style hostfile (one hostname per line):

shell$ mpirun -hostfile my_hostfile -np 2 hello_world_mpi

If you intend to run more than one process on a node, the hostfile can
use the "slots" attribute.  If "slots" is not specified, a count of 1
is assumed.  For example, using the following hostfile:

---------------------------------------------------------------------------
node1.example.com
node2.example.com
node3.example.com slots=2
node4.example.com slots=4
---------------------------------------------------------------------------

shell$ mpirun -hostfile my_hostfile -np 8 hello_world_mpi

will launch MPI_COMM_WORLD rank 0 on node1, rank 1 on node2, ranks 2
and 3 on node3, and ranks 4 through 7 on node4.

Other starters, such as the resource manager / batch scheduling
environments, do not require hostfiles (and will ignore the hostfile
if it is supplied).  They will also launch as many processes as slots
have been allocated by the scheduler if no "-np" argument has been
provided.  For example, running a SLURM job with 8 processors:

shell$ salloc -n 8 mpirun a.out

The above command will reserve 8 processors and run 1 copy of mpirun,
which will, in turn, launch 8 copies of a.out in a single
MPI_COMM_WORLD on the processors that were allocated by SLURM.

Note that the values of component parameters can be changed on the
mpirun / mpiexec command line.  This is explained in the section
below, "The Modular Component Architecture (MCA)".

===========================================================================

The Modular Component Architecture (MCA)

The MCA is the backbone of Open MPI -- most services and functionality
are implemented through MCA components.  Here is a list of all the
component frameworks in Open MPI:

---------------------------------------------------------------------------

MPI component frameworks:
-------------------------

allocator - Memory allocator
bml       - BTL management layer
btl       - MPI point-to-point Byte Transfer Layer, used for MPI
            point-to-point messages on some types of networks
coll      - MPI collective algorithms
crcp      - Checkpoint/restart coordination protocol
dpm       - MPI-2 dynamic process management
fbtl      - file byte transfer layer: abstraction for individual 
            read/write operations for OMPIO
fcache    - framework to store description about a file system
            for OMPIO
fcoll     - collective read and write operations for MPI I/O
fs        - file system functions for MPI I/O
io        - MPI-2 I/O
mpool     - Memory pooling
mtl       - Matching transport layer, used for MPI point-to-point
            messages on some types of networks
op        - Back end computations for intrinsic MPI_Op operators
osc       - MPI-2 one-sided communications
pml       - MPI point-to-point management layer
pubsub    - MPI-2 publish/subscribe management
rcache    - Memory registration cache
sharedfp  - shared file pointer operations for MPI I/O
topo      - MPI topology routines
vprotocol - Protocols for the "v" PML

Back-end run-time environment (RTE) component frameworks:
---------------------------------------------------------

debugger  - Parallel debugger support
errmgr    - RTE error manager
ess       - RTE environment-specfic services
filem     - Remote file management
grpcomm   - RTE group communications
iof       - I/O forwarding
notifier  - System/network administrator noficiation system
odls      - OpenRTE daemon local launch subsystem
oob       - Out of band messaging
plm       - Process lifecycle management
ras       - Resource allocation system
rmaps     - Resource mapping system
rml       - RTE message layer
routed    - Routing table for the RML
sensor    - Software and hardware health monitoring
snapc     - Snapshot coordination
sstore    - Distributed scalable storage

Miscellaneous frameworks:
-------------------------

backtrace   - Debugging call stack backtrace support
carto       - Cartography (host/network mapping) support
compress    - Compression algorithms
crs         - Checkpoint and restart service
event       - Event library (libevent) versioning support
hwloc       - Hardware locality (hwloc) versioning support
if          - OS IP interface support
installdirs - Installation directory relocation services
maffinity   - Memory affinity
memchecker  - Run-time memory checking
memcpy      - Memopy copy support
memory      - Memory management hooks
paffinity   - Processor affinity
pstat       - Process status
shmem       - Shared memory support
timer       - High-resolution timers

---------------------------------------------------------------------------

Each framework typically has one or more components that are used at
run-time.  For example, the btl framework is used by the MPI layer to
send bytes across different types underlying networks.  The tcp btl,
for example, sends messages across TCP-based networks; the openib btl
sends messages across OpenFabrics-based networks; the MX btl sends
messages across Myrinet MX / Open-MX networks.

Each component typically has some tunable parameters that can be
changed at run-time.  Use the ompi_info command to check a component
to see what its tunable parameters are.  For example:

shell$ ompi_info --param btl tcp

shows all the parameters (and default values) for the tcp btl
component.

These values can be overridden at run-time in several ways.  At
run-time, the following locations are examined (in order) for new
values of parameters:

1. <prefix>/etc/openmpi-mca-params.conf

   This file is intended to set any system-wide default MCA parameter
   values -- it will apply, by default, to all users who use this Open
   MPI installation.  The default file that is installed contains many
   comments explaining its format.

2. $HOME/.openmpi/mca-params.conf

   If this file exists, it should be in the same format as
   <prefix>/etc/openmpi-mca-params.conf.  It is intended to provide
   per-user default parameter values.

3. environment variables of the form OMPI_MCA_<name> set equal to a
   <value>

   Where <name> is the name of the parameter.  For example, set the
   variable named OMPI_MCA_btl_tcp_frag_size to the value 65536
   (Bourne-style shells):

   shell$ OMPI_MCA_btl_tcp_frag_size=65536
   shell$ export OMPI_MCA_btl_tcp_frag_size

4. the mpirun command line: --mca <name> <value>
 
   Where <name> is the name of the parameter.  For example:

   shell$ mpirun --mca btl_tcp_frag_size 65536 -np 2 hello_world_mpi

These locations are checked in order.  For example, a parameter value
passed on the mpirun command line will override an environment
variable; an environment variable will override the system-wide
defaults.

Each component typically activates itself when relavant.  For example,
the MX component will detect that MX devices are present and will
automatically be used for MPI communications.  The SLURM component
will automatically detect when running inside a SLURM job and activate
itself.  And so on.

Components can be manually activated or deactivated if necessary, of
course.  The most common components that are manually activated,
deactivated, or tuned are the "BTL" components -- components that are
used for MPI point-to-point communications on many types common
networks. 

For example, to *only* activate the TCP and "self" (process loopback)
components are used for MPI communications, specify them in a
comma-delimited list to the "btl" MCA parameter:

   shell$ mpirun --mca btl tcp,self hello_world_mpi

To add shared memory support, add "sm" into the command-delimited list
(list order does not matter):
    
   shell$ mpirun --mca btl tcp,sm,self hello_world_mpi

To specifically deactivate a specific component, the comma-delimited
list can be prepended with a "^" to negate it:

   shell$ mpirun --mca btl ^tcp hello_mpi_world

The above command will use any other BTL component other than the tcp
component.

===========================================================================

Common Questions
----------------

Many common questions about building and using Open MPI are answered
on the FAQ:

    http://www.open-mpi.org/faq/

===========================================================================

Got more questions?
-------------------

Found a bug?  Got a question?  Want to make a suggestion?  Want to
contribute to Open MPI?  Please let us know!

When submitting questions and problems, be sure to include as much
extra information as possible.  This web page details all the
information that we request in order to provide assistance:

     http://www.open-mpi.org/community/help/

User-level questions and comments should generally be sent to the
user's mailing list (users@open-mpi.org).  Because of spam, only
subscribers are allowed to post to this list (ensure that you
subscribe with and post from *exactly* the same e-mail address --
joe@example.com is considered different than
joe@mycomputer.example.com!).  Visit this page to subscribe to the
user's list:

     http://www.open-mpi.org/mailman/listinfo.cgi/users

Developer-level bug reports, questions, and comments should generally
be sent to the developer's mailing list (devel@open-mpi.org).  Please
do not post the same question to both lists.  As with the user's list,
only subscribers are allowed to post to the developer's list.  Visit
the following web page to subscribe:

     http://www.open-mpi.org/mailman/listinfo.cgi/devel

Make today an Open MPI day!