552c9ca5a0
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic. This commit was SVN r32317.
620 строки
30 KiB
C
620 строки
30 KiB
C
/*
|
|
* Copyright (c) 2013 Mellanox Technologies, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Copyright (c) 2014 Cisco Systems, Inc. All rights reserved.
|
|
* $COPYRIGHT$
|
|
*
|
|
* Additional copyrights may follow
|
|
*
|
|
* $HEADER$
|
|
*/
|
|
|
|
#include "oshmem_config.h"
|
|
#include "mpi.h"
|
|
#include "shmem.h"
|
|
|
|
#include <string.h>
|
|
#include <ctype.h>
|
|
#ifdef HAVE_UNISTD_H
|
|
#include <unistd.h>
|
|
#endif
|
|
#ifdef HAVE_SYS_PARAM_H
|
|
#include <sys/param.h>
|
|
#endif
|
|
#ifdef HAVE_NETDB_H
|
|
#include <netdb.h>
|
|
#endif
|
|
|
|
#include MCA_timer_IMPLEMENTATION_HEADER
|
|
#include "opal/class/opal_value_array.h"
|
|
#include "opal/class/opal_pointer_array.h"
|
|
#include "opal/util/printf.h"
|
|
#include "opal/memoryhooks/memory.h"
|
|
#include "opal/runtime/opal_info_support.h"
|
|
|
|
#if OMPI_RTE_ORTE
|
|
#include "orte/util/show_help.h"
|
|
#endif
|
|
|
|
#include "ompi/tools/ompi_info/ompi_info.h"
|
|
#include "ompi/include/mpi_portable_platform.h"
|
|
|
|
#include "oshmem/tools/oshmem_info/oshmem_info.h"
|
|
|
|
|
|
const char *ompi_info_deprecated_value = "deprecated-ompi-info-value";
|
|
|
|
static void append(char *dest, size_t max, int *first, char *src)
|
|
{
|
|
size_t len;
|
|
|
|
if (NULL == src) {
|
|
return;
|
|
}
|
|
|
|
len = max - strlen(dest);
|
|
if (!(*first)) {
|
|
strncat(dest, ", ", len);
|
|
len = max - strlen(dest);
|
|
}
|
|
strncat(dest, src, len);
|
|
*first = 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* do_config
|
|
* Accepts:
|
|
* - want_all: boolean flag; TRUE -> display all options
|
|
* FALSE -> display selected options
|
|
*
|
|
* This function displays all the options with which the current
|
|
* installation of ompi was configured. There are many options here
|
|
* that are carried forward from OMPI-7 and are not mca parameters
|
|
* in OMPI-10. I have to dig through the invalid options and replace
|
|
* them with OMPI-10 options.
|
|
*/
|
|
void oshmem_info_do_config(bool want_all)
|
|
{
|
|
char *cxx;
|
|
char *fortran_mpifh;
|
|
char *fortran_usempi;
|
|
char *fortran_usempif08;
|
|
char *fortran_usempif08_compliance;
|
|
char *fortran_have_ignore_tkr;
|
|
char *fortran_have_f08_assumed_rank;
|
|
char *fortran_build_f08_subarrays;
|
|
char *fortran_have_optional_args;
|
|
char *fortran_have_bind_c;
|
|
char *fortran_have_private;
|
|
char *fortran_have_abstract;
|
|
char *fortran_have_asynchronous;
|
|
char *fortran_have_procedure;
|
|
char *fortran_08_using_wrappers_for_choice_buffer_functions;
|
|
char *java;
|
|
char *heterogeneous;
|
|
char *memprofile;
|
|
char *memdebug;
|
|
char *debug;
|
|
char *mpi_interface_warning;
|
|
char *cprofiling;
|
|
char *cxxprofiling;
|
|
char *fortran_mpifh_profiling;
|
|
char *fortran_usempi_profiling;
|
|
char *fortran_usempif08_profiling;
|
|
char *cxxexceptions;
|
|
char *threads;
|
|
char *want_libltdl;
|
|
#if OMPI_RTE_ORTE
|
|
char *mpirun_prefix_by_default;
|
|
#endif
|
|
char *sparse_groups;
|
|
char *have_mpi_io;
|
|
char *wtime_support;
|
|
char *symbol_visibility;
|
|
char *ft_support;
|
|
char *crdebug_support;
|
|
char *topology_support;
|
|
char *vt_support;
|
|
|
|
/* Do a little preprocessor trickery here to figure opal_info_out the
|
|
* tri-state of MPI_PARAM_CHECK (which will be either 0, 1, or
|
|
* ompi_mpi_param_check). The preprocessor will only allow
|
|
* comparisons against constants, so you'll get a warning if you
|
|
* check MPI_PARAM_CHECK against 0 or 1, but its real value is the
|
|
* char *ompi_mpi_param_check. So define ompi_mpi_param_check to
|
|
* be a constant, and then all the preprocessor comparisons work
|
|
* opal_info_out ok. Note that we chose the preprocessor
|
|
* comparison ropal_info_oute because it is not sufficient to
|
|
* simply set the variable ompi_mpi_param_check to a non-0/non-1
|
|
* value. This is because the compiler will generate a warning
|
|
* that that C variable is unused when MPI_PARAM_CHECK is
|
|
* hard-coded to 0 or 1.
|
|
*/
|
|
char *paramcheck;
|
|
#define ompi_mpi_param_check 999
|
|
#if 0 == MPI_PARAM_CHECK
|
|
paramcheck = "never";
|
|
#elif 1 == MPI_PARAM_CHECK
|
|
paramcheck = "always";
|
|
#else
|
|
paramcheck = "runtime";
|
|
#endif
|
|
|
|
/* setup the strings that don't require allocations*/
|
|
cxx = OMPI_BUILD_CXX_BINDINGS ? "yes" : "no";
|
|
if (OMPI_BUILD_FORTRAN_USEMPI_BINDINGS) {
|
|
if (OMPI_FORTRAN_HAVE_IGNORE_TKR) {
|
|
fortran_usempi = "yes (full: ignore TKR)";
|
|
} else {
|
|
fortran_usempi = "yes (limited: overloading)";
|
|
}
|
|
} else {
|
|
fortran_usempi = "no";
|
|
}
|
|
fortran_usempif08 = OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS ? "yes" : "no";
|
|
fortran_have_f08_assumed_rank = OMPI_FORTRAN_HAVE_F08_ASSUMED_RANK ?
|
|
"yes" : "no";
|
|
fortran_build_f08_subarrays = OMPI_BUILD_FORTRAN_F08_SUBARRAYS ?
|
|
"yes" : "no";
|
|
fortran_have_optional_args = OMPI_FORTRAN_HAVE_OPTIONAL_ARGS ?
|
|
"yes" : "no";
|
|
fortran_have_bind_c = OMPI_FORTRAN_HAVE_BIND_C ? "yes" : "no";
|
|
fortran_have_private = OMPI_FORTRAN_HAVE_PRIVATE ? "yes" : "no";
|
|
fortran_have_abstract = OMPI_FORTRAN_HAVE_ABSTRACT ? "yes" : "no";
|
|
fortran_have_asynchronous = OMPI_FORTRAN_HAVE_ASYNCHRONOUS ? "yes" : "no";
|
|
fortran_have_procedure = OMPI_FORTRAN_HAVE_PROCEDURE ? "yes" : "no";
|
|
fortran_08_using_wrappers_for_choice_buffer_functions =
|
|
OMPI_FORTRAN_NEED_WRAPPER_ROUTINES ? "yes" : "no";
|
|
|
|
/* Build a string describing what level of compliance the mpi_f08
|
|
module has */
|
|
if (OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) {
|
|
|
|
/* Do we have everything? */
|
|
if (OMPI_BUILD_FORTRAN_F08_SUBARRAYS &&
|
|
OMPI_FORTRAN_HAVE_PRIVATE &&
|
|
OMPI_FORTRAN_HAVE_ABSTRACT &&
|
|
OMPI_FORTRAN_HAVE_ASYNCHRONOUS &&
|
|
OMPI_FORTRAN_HAVE_PROCEDURE &&
|
|
OMPI_FORTRAN_NEED_WRAPPER_ROUTINES) {
|
|
fortran_usempif08_compliance = strdup("The mpi_f08 module is available, and is fully compliant. w00t!");
|
|
} else {
|
|
char f08[1024];
|
|
int first = 1;
|
|
snprintf(f08, sizeof(f08),
|
|
"The mpi_f08 module is available, but due to limitations in the %s compiler, does not support the following: ",
|
|
OMPI_FC);
|
|
if (!OMPI_BUILD_FORTRAN_F08_SUBARRAYS) {
|
|
append(f08, sizeof(f08), &first, "array subsections");
|
|
}
|
|
if (!OMPI_FORTRAN_HAVE_PRIVATE) {
|
|
append(f08, sizeof(f08), &first, "private MPI_Status members");
|
|
}
|
|
if (!OMPI_FORTRAN_HAVE_ABSTRACT) {
|
|
append(f08, sizeof(f08), &first, "ABSTRACT INTERFACE function pointers");
|
|
}
|
|
if (!OMPI_FORTRAN_HAVE_ASYNCHRONOUS) {
|
|
append(f08, sizeof(f08), &first, "Fortran '08-specified ASYNCHRONOUS behavior");
|
|
}
|
|
if (!OMPI_FORTRAN_HAVE_PROCEDURE) {
|
|
append(f08, sizeof(f08), &first, "PROCEDUREs");
|
|
}
|
|
if (OMPI_FORTRAN_NEED_WRAPPER_ROUTINES) {
|
|
append(f08, sizeof(f08), &first, "direct passthru (where possible) to underlying Open MPI's C functionality");
|
|
}
|
|
fortran_usempif08_compliance = strdup(f08);
|
|
}
|
|
} else {
|
|
fortran_usempif08_compliance = strdup("The mpi_f08 module was not built");
|
|
}
|
|
|
|
java = OMPI_WANT_JAVA_BINDINGS ? "yes" : "no";
|
|
heterogeneous = OPAL_ENABLE_HETEROGENEOUS_SUPPORT ? "yes" : "no";
|
|
memprofile = OPAL_ENABLE_MEM_PROFILE ? "yes" : "no";
|
|
memdebug = OPAL_ENABLE_MEM_DEBUG ? "yes" : "no";
|
|
debug = OPAL_ENABLE_DEBUG ? "yes" : "no";
|
|
mpi_interface_warning = OMPI_WANT_MPI_INTERFACE_WARNING ? "yes" : "no";
|
|
cprofiling = OMPI_ENABLE_MPI_PROFILING ? "yes" : "no";
|
|
cxxprofiling = (OMPI_BUILD_CXX_BINDINGS && OMPI_ENABLE_MPI_PROFILING) ? "yes" : "no";
|
|
cxxexceptions = (OMPI_BUILD_CXX_BINDINGS && OMPI_HAVE_CXX_EXCEPTION_SUPPORT) ? "yes" : "no";
|
|
fortran_mpifh_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_MPIFH_BINDINGS) ? "yes" : "no";
|
|
fortran_usempi_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_USEMPI_BINDINGS) ? "yes" : "no";
|
|
fortran_usempif08_profiling = (OMPI_ENABLE_MPI_PROFILING && OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) ? "yes" : "no";
|
|
want_libltdl = OPAL_WANT_LIBLTDL ? "yes" : "no";
|
|
#if OMPI_RTE_ORTE
|
|
mpirun_prefix_by_default = ORTE_WANT_ORTERUN_PREFIX_BY_DEFAULT ? "yes" : "no";
|
|
#endif
|
|
sparse_groups = OMPI_GROUP_SPARSE ? "yes" : "no";
|
|
have_mpi_io = OMPI_PROVIDE_MPI_FILE_INTERFACE ? "yes" : "no";
|
|
wtime_support = OPAL_TIMER_USEC_NATIVE ? "native" : "gettimeofday";
|
|
symbol_visibility = OPAL_C_HAVE_VISIBILITY ? "yes" : "no";
|
|
topology_support = OPAL_HAVE_HWLOC ? "yes" : "no";
|
|
vt_support = OMPI_ENABLE_CONTRIB_vt ? "yes" : "no";
|
|
|
|
/* setup strings that require allocation */
|
|
if (OMPI_BUILD_FORTRAN_MPIFH_BINDINGS) {
|
|
(void)asprintf(&fortran_mpifh, "yes (%s)",
|
|
(OPAL_HAVE_WEAK_SYMBOLS ? "all" :
|
|
(OMPI_FORTRAN_CAPS ? "caps" :
|
|
(OMPI_FORTRAN_PLAIN ? "lower case" :
|
|
(OMPI_FORTRAN_SINGLE_UNDERSCORE ? "single underscore" : "double underscore")))));
|
|
} else {
|
|
fortran_mpifh = strdup("no");
|
|
}
|
|
|
|
if (OMPI_FORTRAN_HAVE_IGNORE_TKR) {
|
|
/* OMPI_FORTRAN_IGNORE_TKR_PREDECL is already in quotes; it
|
|
didn't work consistently to put it in _STRINGIFY because
|
|
sometimes the compiler would actually interpret the pragma
|
|
in there before stringify-ing it. */
|
|
(void)asprintf(&fortran_have_ignore_tkr, "yes (%s)",
|
|
OMPI_FORTRAN_IGNORE_TKR_PREDECL);
|
|
} else {
|
|
fortran_have_ignore_tkr = strdup("no");
|
|
}
|
|
|
|
if (OPAL_HAVE_POSIX_THREADS) { /* should just test OPAL_HAVE_THREADS */
|
|
#if OMPI_RTE_ORTE
|
|
(void)asprintf(&threads, "%s (MPI_THREAD_MULTIPLE: %s, OPAL support: %s, OMPI progress: %s, ORTE progress: yes, Event lib: yes)",
|
|
(OPAL_HAVE_POSIX_THREADS ? "posix" : "type unknown"), /* "type unknown" can presumably never happen */
|
|
OMPI_ENABLE_THREAD_MULTIPLE ? "yes" : "no",
|
|
OPAL_ENABLE_MULTI_THREADS ? "yes" : "no",
|
|
OPAL_ENABLE_PROGRESS_THREADS ? "yes" : "no");
|
|
#else
|
|
(void)asprintf(&threads, "%s (MPI_THREAD_MULTIPLE: %s, OPAL support: %s, OMPI progress: %s, Event lib: yes)",
|
|
(OPAL_HAVE_POSIX_THREADS ? "posix" : "type unknown"), /* "type unknown" can presumably never happen */
|
|
OMPI_ENABLE_THREAD_MULTIPLE ? "yes" : "no",
|
|
OPAL_ENABLE_MULTI_THREADS ? "yes" : "no",
|
|
OPAL_ENABLE_PROGRESS_THREADS ? "yes" : "no");
|
|
#endif
|
|
} else {
|
|
threads = strdup("no");
|
|
}
|
|
|
|
(void)asprintf(&ft_support, "%s (checkpoint thread: %s)",
|
|
OPAL_ENABLE_FT ? "yes" : "no", OPAL_ENABLE_FT_THREAD ? "yes" : "no");
|
|
|
|
(void)asprintf(&crdebug_support, "%s",
|
|
OPAL_ENABLE_CRDEBUG ? "yes" : "no");
|
|
|
|
/* output values */
|
|
opal_info_out("Configured by", "config:user", OPAL_CONFIGURE_USER);
|
|
opal_info_out("Configured on", "config:timestamp", OPAL_CONFIGURE_DATE);
|
|
opal_info_out("Configure host", "config:host", OPAL_CONFIGURE_HOST);
|
|
|
|
opal_info_out("Built by", "build:user", OMPI_BUILD_USER);
|
|
opal_info_out("Built on", "build:timestamp", OMPI_BUILD_DATE);
|
|
opal_info_out("Built host", "build:host", OMPI_BUILD_HOST);
|
|
|
|
opal_info_out("C bindings", "bindings:c", "yes");
|
|
opal_info_out("C++ bindings", "bindings:cxx", cxx);
|
|
opal_info_out("Fort mpif.h", "bindings:mpif.h", fortran_mpifh);
|
|
free(fortran_mpifh);
|
|
opal_info_out("Fort use mpi", "bindings:use_mpi",
|
|
fortran_usempi);
|
|
opal_info_out("Fort use mpi size", "bindings:use_mpi:size",
|
|
ompi_info_deprecated_value);
|
|
opal_info_out("Fort use mpi_f08", "bindings:use_mpi_f08",
|
|
fortran_usempif08);
|
|
opal_info_out("Fort mpi_f08 compliance", "bindings:use_mpi_f08:compliance",
|
|
fortran_usempif08_compliance);
|
|
if (NULL != fortran_usempif08_compliance) {
|
|
free(fortran_usempif08_compliance);
|
|
}
|
|
opal_info_out("Fort mpi_f08 subarrays", "bindings:use_mpi_f08:subarrays-supported",
|
|
fortran_build_f08_subarrays);
|
|
opal_info_out("Java bindings", "bindings:java", java);
|
|
|
|
opal_info_out("Wrapper compiler rpath", "compiler:all:rpath",
|
|
WRAPPER_RPATH_SUPPORT);
|
|
opal_info_out("C compiler", "compiler:c:command", OPAL_CC);
|
|
opal_info_out("C compiler absolute", "compiler:c:absolute",
|
|
OPAL_CC_ABSOLUTE);
|
|
opal_info_out("C compiler family name", "compiler:c:familyname",
|
|
_STRINGIFY(OPAL_BUILD_PLATFORM_COMPILER_FAMILYNAME));
|
|
opal_info_out("C compiler version", "compiler:c:version",
|
|
_STRINGIFY(OPAL_BUILD_PLATFORM_COMPILER_VERSION_STR));
|
|
|
|
if (want_all) {
|
|
opal_info_out_int("C char size", "compiler:c:sizeof:char", sizeof(char));
|
|
/* JMS: should be fixed in MPI-2.2 to differentiate between C
|
|
_Bool and C++ bool. For the moment, the code base assumes
|
|
that they are the same. Because of opal_config_bottom.h,
|
|
we can sizeof(bool) here, so we might as well -- even
|
|
though this technically isn't right. This should be fixed
|
|
when we update to MPI-2.2. See below for note about C++
|
|
bool alignment. */
|
|
opal_info_out_int("C bool size", "compiler:c:sizeof:bool", sizeof(bool));
|
|
opal_info_out_int("C short size", "compiler:c:sizeof:short", sizeof(short));
|
|
opal_info_out_int("C int size", "compiler:c:sizeof:int", sizeof(int));
|
|
opal_info_out_int("C long size", "compiler:c:sizeof:long", sizeof(long));
|
|
opal_info_out_int("C float size", "compiler:c:sizeof:float", sizeof(float));
|
|
opal_info_out_int("C double size", "compiler:c:sizeof:double", sizeof(double));
|
|
opal_info_out_int("C pointer size", "compiler:c:sizeof:pointer", sizeof(void *));
|
|
opal_info_out_int("C char align", "compiler:c:align:char", OPAL_ALIGNMENT_CHAR);
|
|
#if OMPI_BUILD_CXX_BINDINGS
|
|
/* JMS: See above for note about C++ bool size. We don't have
|
|
the bool alignment the way configure currently runs -- need
|
|
to clean this up when we update for MPI-2.2. */
|
|
opal_info_out_int("C bool align", "compiler:c:align:bool", OPAL_ALIGNMENT_CXX_BOOL);
|
|
#else
|
|
opal_info_out("C bool align", "compiler:c:align:bool", "skipped");
|
|
#endif
|
|
opal_info_out_int("C int align", "compiler:c:align:int", OPAL_ALIGNMENT_INT);
|
|
opal_info_out_int("C float align", "compiler:c:align:float", OPAL_ALIGNMENT_FLOAT);
|
|
opal_info_out_int("C double align", "compiler:c:align:double", OPAL_ALIGNMENT_DOUBLE);
|
|
}
|
|
|
|
opal_info_out("C++ compiler", "compiler:cxx:command", OMPI_CXX);
|
|
opal_info_out("C++ compiler absolute", "compiler:cxx:absolute", OMPI_CXX_ABSOLUTE);
|
|
opal_info_out("Fort compiler", "compiler:fortran:command", OMPI_FC);
|
|
opal_info_out("Fort compiler abs", "compiler:fortran:absolute",
|
|
OMPI_FC_ABSOLUTE);
|
|
opal_info_out("Fort ignore TKR", "compiler:fortran:ignore_tkr",
|
|
fortran_have_ignore_tkr);
|
|
free(fortran_have_ignore_tkr);
|
|
opal_info_out("Fort 08 assumed shape",
|
|
"compiler:fortran:f08_assumed_rank",
|
|
fortran_have_f08_assumed_rank);
|
|
opal_info_out("Fort optional args",
|
|
"compiler:fortran:optional_arguments",
|
|
fortran_have_optional_args);
|
|
opal_info_out("Fort BIND(C)",
|
|
"compiler:fortran:bind_c",
|
|
fortran_have_bind_c);
|
|
opal_info_out("Fort PRIVATE",
|
|
"compiler:fortran:private",
|
|
fortran_have_private);
|
|
opal_info_out("Fort ABSTRACT",
|
|
"compiler:fortran:abstract",
|
|
fortran_have_abstract);
|
|
opal_info_out("Fort ASYNCHRONOUS",
|
|
"compiler:fortran:asynchronous",
|
|
fortran_have_asynchronous);
|
|
opal_info_out("Fort PROCEDURE",
|
|
"compiler:fortran:procedure",
|
|
fortran_have_procedure);
|
|
opal_info_out("Fort f08 using wrappers",
|
|
"compiler:fortran:08_wrappers",
|
|
fortran_08_using_wrappers_for_choice_buffer_functions);
|
|
|
|
if (want_all) {
|
|
|
|
/* Will always have the size of Fortran integer */
|
|
|
|
opal_info_out_int("Fort integer size", "compiler:fortran:sizeof:integer",
|
|
OMPI_SIZEOF_FORTRAN_INTEGER);
|
|
|
|
opal_info_out_int("Fort logical size", "compiler:fortran:sizeof:logical",
|
|
OMPI_SIZEOF_FORTRAN_LOGICAL);
|
|
opal_info_out_int("Fort logical value true", "compiler:fortran:value:true",
|
|
OMPI_FORTRAN_VALUE_TRUE);
|
|
|
|
|
|
/* May or may not have the other Fortran sizes */
|
|
|
|
if (OMPI_BUILD_FORTRAN_MPIFH_BINDINGS ||
|
|
OMPI_BUILD_FORTRAN_USEMPI_BINDINGS ||
|
|
OMPI_BUILD_FORTRAN_USEMPIF08_BINDINGS) {
|
|
opal_info_out("Fort have integer1", "compiler:fortran:have:integer1",
|
|
OMPI_HAVE_FORTRAN_INTEGER1 ? "yes" : "no");
|
|
opal_info_out("Fort have integer2", "compiler:fortran:have:integer2",
|
|
OMPI_HAVE_FORTRAN_INTEGER2 ? "yes" : "no");
|
|
opal_info_out("Fort have integer4", "compiler:fortran:have:integer4",
|
|
OMPI_HAVE_FORTRAN_INTEGER4 ? "yes" : "no");
|
|
opal_info_out("Fort have integer8", "compiler:fortran:have:integer8",
|
|
OMPI_HAVE_FORTRAN_INTEGER8 ? "yes" : "no");
|
|
opal_info_out("Fort have integer16", "compiler:fortran:have:integer16",
|
|
OMPI_HAVE_FORTRAN_INTEGER16 ? "yes" : "no");
|
|
|
|
opal_info_out("Fort have real4", "compiler:fortran:have:real4",
|
|
OMPI_HAVE_FORTRAN_REAL4 ? "yes" : "no");
|
|
opal_info_out("Fort have real8", "compiler:fortran:have:real8",
|
|
OMPI_HAVE_FORTRAN_REAL8 ? "yes" : "no");
|
|
opal_info_out("Fort have real16", "compiler:fortran:have:real16",
|
|
OMPI_HAVE_FORTRAN_REAL16 && OMPI_REAL16_MATCHES_C ? "yes" : "no");
|
|
|
|
opal_info_out("Fort have complex8", "compiler:fortran:have:complex8",
|
|
OMPI_HAVE_FORTRAN_COMPLEX8 ? "yes" : "no");
|
|
opal_info_out("Fort have complex16", "compiler:fortran:have:complex16",
|
|
OMPI_HAVE_FORTRAN_COMPLEX16 ? "yes" : "no");
|
|
opal_info_out("Fort have complex32", "compiler:fortran:have:complex32",
|
|
OMPI_HAVE_FORTRAN_COMPLEX32 && OMPI_REAL16_MATCHES_C ? "yes" : "no");
|
|
|
|
opal_info_out_int("Fort integer1 size", "compiler:fortran:sizeof:integer1",
|
|
OMPI_HAVE_FORTRAN_INTEGER1 ? OMPI_SIZEOF_FORTRAN_INTEGER1 : -1);
|
|
opal_info_out_int("Fort integer2 size", "compiler:fortran:sizeof:integer2",
|
|
OMPI_HAVE_FORTRAN_INTEGER2 ? OMPI_SIZEOF_FORTRAN_INTEGER2 : -1);
|
|
opal_info_out_int("Fort integer4 size", "compiler:fortran:sizeof:integer4",
|
|
OMPI_HAVE_FORTRAN_INTEGER4 ? OMPI_SIZEOF_FORTRAN_INTEGER4 : -1);
|
|
opal_info_out_int("Fort integer8 size", "compiler:fortran:sizeof:integer8",
|
|
OMPI_HAVE_FORTRAN_INTEGER8 ? OMPI_SIZEOF_FORTRAN_INTEGER8 : -1);
|
|
opal_info_out_int("Fort integer16 size", "compiler:fortran:sizeof:integer16",
|
|
OMPI_HAVE_FORTRAN_INTEGER16 ? OMPI_SIZEOF_FORTRAN_INTEGER16 : -1);
|
|
|
|
opal_info_out_int("Fort real size", "compiler:fortran:sizeof:real",
|
|
OMPI_SIZEOF_FORTRAN_REAL);
|
|
opal_info_out_int("Fort real4 size", "compiler:fortran:sizeof:real4",
|
|
OMPI_HAVE_FORTRAN_REAL4 ? OMPI_SIZEOF_FORTRAN_REAL4 : -1);
|
|
opal_info_out_int("Fort real8 size", "compiler:fortran:sizeof:real8",
|
|
OMPI_HAVE_FORTRAN_REAL8 ? OMPI_SIZEOF_FORTRAN_REAL8 : -1);
|
|
opal_info_out_int("Fort real16 size", "compiler:fortran:sizeof:real17",
|
|
OMPI_HAVE_FORTRAN_REAL16 ? OMPI_SIZEOF_FORTRAN_REAL16 : -1);
|
|
|
|
opal_info_out_int("Fort dbl prec size",
|
|
"compiler:fortran:sizeof:double_precision",
|
|
OMPI_SIZEOF_FORTRAN_DOUBLE_PRECISION);
|
|
|
|
opal_info_out_int("Fort cplx size", "compiler:fortran:sizeof:complex",
|
|
OMPI_SIZEOF_FORTRAN_COMPLEX);
|
|
opal_info_out_int("Fort dbl cplx size",
|
|
"compiler:fortran:sizeof:double_complex",
|
|
OMPI_HAVE_FORTRAN_DOUBLE_COMPLEX ? OMPI_SIZEOF_FORTRAN_DOUBLE_COMPLEX : -1);
|
|
opal_info_out_int("Fort cplx8 size", "compiler:fortran:sizeof:complex8",
|
|
OMPI_HAVE_FORTRAN_COMPLEX8 ? OMPI_SIZEOF_FORTRAN_COMPLEX8 : -1);
|
|
opal_info_out_int("Fort cplx16 size", "compiler:fortran:sizeof:complex16",
|
|
OMPI_HAVE_FORTRAN_COMPLEX16 ? OMPI_SIZEOF_FORTRAN_COMPLEX16 : -1);
|
|
opal_info_out_int("Fort cplx32 size", "compiler:fortran:sizeof:complex32",
|
|
OMPI_HAVE_FORTRAN_COMPLEX32 ? OMPI_SIZEOF_FORTRAN_COMPLEX32 : -1);
|
|
|
|
opal_info_out_int("Fort integer align", "compiler:fortran:align:integer",
|
|
OMPI_ALIGNMENT_FORTRAN_INTEGER);
|
|
opal_info_out_int("Fort integer1 align", "compiler:fortran:align:integer1",
|
|
OMPI_HAVE_FORTRAN_INTEGER1 ? OMPI_ALIGNMENT_FORTRAN_INTEGER1 : -1);
|
|
opal_info_out_int("Fort integer2 align", "compiler:fortran:align:integer2",
|
|
OMPI_HAVE_FORTRAN_INTEGER2 ? OMPI_ALIGNMENT_FORTRAN_INTEGER2 : -1);
|
|
opal_info_out_int("Fort integer4 align", "compiler:fortran:align:integer4",
|
|
OMPI_HAVE_FORTRAN_INTEGER4 ? OMPI_ALIGNMENT_FORTRAN_INTEGER4 : -1);
|
|
opal_info_out_int("Fort integer8 align", "compiler:fortran:align:integer8",
|
|
OMPI_HAVE_FORTRAN_INTEGER8 ? OMPI_ALIGNMENT_FORTRAN_INTEGER8 : -1);
|
|
opal_info_out_int("Fort integer16 align", "compiler:fortran:align:integer16",
|
|
OMPI_HAVE_FORTRAN_INTEGER16 ? OMPI_ALIGNMENT_FORTRAN_INTEGER16 : -1);
|
|
|
|
opal_info_out_int("Fort real align", "compiler:fortran:align:real",
|
|
OMPI_ALIGNMENT_FORTRAN_REAL);
|
|
opal_info_out_int("Fort real4 align", "compiler:fortran:align:real4",
|
|
OMPI_HAVE_FORTRAN_REAL4 ? OMPI_ALIGNMENT_FORTRAN_REAL4 : -1);
|
|
opal_info_out_int("Fort real8 align", "compiler:fortran:align:real8",
|
|
OMPI_HAVE_FORTRAN_REAL8 ? OMPI_ALIGNMENT_FORTRAN_REAL8 : -1);
|
|
opal_info_out_int("Fort real16 align", "compiler:fortran:align:real16",
|
|
OMPI_HAVE_FORTRAN_REAL16 ? OMPI_ALIGNMENT_FORTRAN_REAL16 : -1);
|
|
|
|
opal_info_out_int("Fort dbl prec align",
|
|
"compiler:fortran:align:double_precision",
|
|
OMPI_ALIGNMENT_FORTRAN_DOUBLE_PRECISION);
|
|
|
|
opal_info_out_int("Fort cplx align", "compiler:fortran:align:complex",
|
|
OMPI_ALIGNMENT_FORTRAN_COMPLEX);
|
|
opal_info_out_int("Fort dbl cplx align",
|
|
"compiler:fortran:align:double_complex",
|
|
OMPI_HAVE_FORTRAN_DOUBLE_COMPLEX ? OMPI_ALIGNMENT_FORTRAN_DOUBLE_COMPLEX : -1);
|
|
opal_info_out_int("Fort cplx8 align", "compiler:fortran:align:complex8",
|
|
OMPI_HAVE_FORTRAN_COMPLEX8 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX8 : -1);
|
|
opal_info_out_int("Fort cplx16 align", "compiler:fortran:align:complex16",
|
|
OMPI_HAVE_FORTRAN_COMPLEX16 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX16 : -1);
|
|
opal_info_out_int("Fort cplx32 align", "compiler:fortran:align:complex32",
|
|
OMPI_HAVE_FORTRAN_COMPLEX32 ? OMPI_ALIGNMENT_FORTRAN_COMPLEX32 : -1);
|
|
|
|
} else {
|
|
opal_info_out("Fort real size", "compiler:fortran:sizeof:real", "skipped");
|
|
opal_info_out("Fort dbl prec size",
|
|
"compiler:fortran:sizeof:double_precision", "skipped");
|
|
opal_info_out("Fort cplx size", "compiler:fortran:sizeof:complex", "skipped");
|
|
opal_info_out("Fort dbl cplx size",
|
|
"compiler:fortran:sizeof:double_complex", "skipped");
|
|
|
|
opal_info_out("Fort integer align", "compiler:fortran:align:integer", "skipped");
|
|
opal_info_out("Fort real align", "compiler:fortran:align:real", "skipped");
|
|
opal_info_out("Fort dbl prec align",
|
|
"compiler:fortran:align:double_precision","skipped");
|
|
opal_info_out("Fort cplx align", "compiler:fortran:align:complex", "skipped");
|
|
opal_info_out("Fort dbl cplx align",
|
|
"compiler:fortran:align:double_complex", "skipped");
|
|
}
|
|
}
|
|
|
|
opal_info_out("C profiling", "option:profiling:c", cprofiling);
|
|
opal_info_out("C++ profiling", "option:profiling:cxx", cxxprofiling);
|
|
opal_info_out("Fort mpif.h profiling", "option:profiling:mpif.h",
|
|
fortran_mpifh_profiling);
|
|
opal_info_out("Fort use mpi profiling", "option:profiling:use_mpi",
|
|
fortran_usempi_profiling);
|
|
opal_info_out("Fort use mpi_f08 prof",
|
|
"option:profiling:use_mpi_f08",
|
|
fortran_usempif08_profiling);
|
|
|
|
opal_info_out("C++ exceptions", "option:cxx_exceptions", cxxexceptions);
|
|
opal_info_out("Thread support", "option:threads", threads);
|
|
free(threads);
|
|
opal_info_out("Sparse Groups", "option:sparse:groups", sparse_groups);
|
|
|
|
if (want_all) {
|
|
|
|
/* Don't display the build CPPFLAGS or CXXCPPFLAGS because they're
|
|
* just -I$(top_srcdir)/include, etc. Hence, they're a) boring,
|
|
* and c) specific for ompi_info.
|
|
*/
|
|
|
|
opal_info_out("Build CFLAGS", "option:build:cflags", OMPI_BUILD_CFLAGS);
|
|
opal_info_out("Build CXXFLAGS", "option:build:cxxflags", OMPI_BUILD_CXXFLAGS);
|
|
opal_info_out("Build FCFLAGS", "option:build:fcflags", OMPI_BUILD_FCFLAGS);
|
|
opal_info_out("Build LDFLAGS", "option:build:ldflags", OMPI_BUILD_LDFLAGS);
|
|
opal_info_out("Build LIBS", "option:build:libs", OMPI_BUILD_LIBS);
|
|
|
|
opal_info_out("Wrapper extra CFLAGS", "option:wrapper:extra_cflags",
|
|
WRAPPER_EXTRA_CFLAGS);
|
|
opal_info_out("Wrapper extra CXXFLAGS", "option:wrapper:extra_cxxflags",
|
|
WRAPPER_EXTRA_CXXFLAGS);
|
|
opal_info_out("Wrapper extra FCFLAGS", "option:wrapper:extra_fcflags",
|
|
WRAPPER_EXTRA_FCFLAGS);
|
|
opal_info_out("Wrapper extra LDFLAGS", "option:wrapper:extra_ldflags",
|
|
WRAPPER_EXTRA_LDFLAGS);
|
|
opal_info_out("Wrapper extra LIBS", "option:wrapper:extra_libs",
|
|
WRAPPER_EXTRA_LIBS);
|
|
}
|
|
|
|
opal_info_out("Internal debug support", "option:debug", debug);
|
|
opal_info_out("MPI interface warnings", "option:mpi-interface-warning", mpi_interface_warning);
|
|
opal_info_out("MPI parameter check", "option:mpi-param-check", paramcheck);
|
|
opal_info_out("Memory profiling support", "option:mem-profile", memprofile);
|
|
opal_info_out("Memory debugging support", "option:mem-debug", memdebug);
|
|
opal_info_out("libltdl support", "option:dlopen", want_libltdl);
|
|
opal_info_out("Heterogeneous support", "options:heterogeneous", heterogeneous);
|
|
#if OMPI_RTE_ORTE
|
|
opal_info_out("mpirun default --prefix", "mpirun:prefix_by_default",
|
|
mpirun_prefix_by_default);
|
|
#endif
|
|
opal_info_out("MPI I/O support", "options:mpi-io", have_mpi_io);
|
|
opal_info_out("MPI_WTIME support", "options:mpi-wtime", wtime_support);
|
|
opal_info_out("Symbol vis. support", "options:visibility", symbol_visibility);
|
|
opal_info_out("Host topology support", "options:host-topology",
|
|
topology_support);
|
|
|
|
opal_info_out("MPI extensions", "options:mpi_ext", OMPI_MPIEXT_COMPONENTS);
|
|
|
|
opal_info_out("FT Checkpoint support", "options:ft_support", ft_support);
|
|
free(ft_support);
|
|
|
|
opal_info_out("C/R Enabled Debugging", "options:crdebug_support", crdebug_support);
|
|
free(crdebug_support);
|
|
|
|
opal_info_out("VampirTrace support", "options:vt", vt_support);
|
|
|
|
opal_info_out_int("MPI_MAX_PROCESSOR_NAME", "options:mpi-max-processor-name",
|
|
MPI_MAX_PROCESSOR_NAME);
|
|
opal_info_out_int("MPI_MAX_ERROR_STRING", "options:mpi-max-error-string",
|
|
MPI_MAX_ERROR_STRING);
|
|
opal_info_out_int("MPI_MAX_OBJECT_NAME", "options:mpi-max-object-name",
|
|
MPI_MAX_OBJECT_NAME);
|
|
opal_info_out_int("MPI_MAX_INFO_KEY", "options:mpi-max-info-key",
|
|
MPI_MAX_INFO_KEY);
|
|
opal_info_out_int("MPI_MAX_INFO_VAL", "options:mpi-max-info-val",
|
|
MPI_MAX_INFO_VAL);
|
|
opal_info_out_int("MPI_MAX_PORT_NAME", "options:mpi-max-port-name",
|
|
MPI_MAX_PORT_NAME);
|
|
#if OMPI_PROVIDE_MPI_FILE_INTERFACE
|
|
opal_info_out_int("MPI_MAX_DATAREP_STRING", "options:mpi-max-datarep-string",
|
|
MPI_MAX_DATAREP_STRING);
|
|
#else
|
|
opal_info_out("MPI_MAX_DATAREP_STRING", "options:mpi-max-datarep-string",
|
|
"IO interface not provided");
|
|
#endif
|
|
|
|
/* This block displays all the options with which the current
|
|
* installation of oshmem was configured. */
|
|
{
|
|
char *oshmem_fortran = OSHMEM_BUILD_FORTRAN_BINDINGS ? "yes" : "no";
|
|
char *oshmem_compat = OSHMEM_SPEC_COMPAT ? "yes" : "no";
|
|
char *oshmem_param_check = OSHMEM_PARAM_CHECK ? "yes" : "no";
|
|
char *oshmem_profiling = OSHMEM_PROFILING ? "yes" : "no";
|
|
|
|
opal_info_out("OSHMEM C bindings", "oshmem:bindings:c", "yes");
|
|
opal_info_out("OSHMEM Fortran bindings", "oshmem:bindings:fort", oshmem_fortran);
|
|
opal_info_out("OSHMEM SGI/Quadrics mode", "oshmem:options:spec_compat", oshmem_compat);
|
|
opal_info_out("OSHMEM API param check", "oshmem:options:param_check", oshmem_param_check);
|
|
opal_info_out("OSHMEM profiling support", "oshmem:options:profiling", oshmem_profiling);
|
|
}
|
|
}
|