ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
2f137ff151
openmpi/opal/mca/btl/usnic/btl_usnic_compat.c

747 строки
26 KiB
C
Исходник Ответственный История

/*
* Copyright (c) 2014-2015 Cisco Systems, Inc. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#if BTL_IN_OPAL
#include "opal_config.h"
#include "opal/mca/btl/btl.h"
#else
#include "ompi_config.h"
#include "ompi/mca/btl/btl.h"
#endif
#include "opal/mca/mca.h"
#include "opal_stdint.h"
#include "btl_usnic_compat.h"
#include "btl_usnic_frag.h"
#include "btl_usnic_endpoint.h"
#include "btl_usnic_connectivity.h"
#include "btl_usnic_send.h"
/************************************************************************/
/* v2.0 and beyond */
#if (OPAL_MAJOR_VERSION >= 2)
#include "opal/util/proc.h"
/**************************
* usNIC BTL-specific functions to hide differences between master and
* v1.8
**************************/
void usnic_compat_modex_send(int *rc,
mca_base_component_t *component,
opal_btl_usnic_modex_t *modexes,
size_t size)
{
OPAL_MODEX_SEND(*rc, PMIX_SYNC_REQD, PMIX_REMOTE, component,
modexes, size);
}
void usnic_compat_modex_recv(int *rc,
mca_base_component_t *component,
opal_proc_t *proc,
opal_btl_usnic_modex_t **modexes,
size_t *size)
{
OPAL_MODEX_RECV(*rc, component, proc, (uint8_t**) modexes, size);
}
uint64_t usnic_compat_rte_hash_name(opal_process_name_t *pname)
{
uint64_t name = pname->jobid;
name <<= 32;
name += pname->vpid;
return name;
}
const char *usnic_compat_proc_name_print(opal_process_name_t *pname)
{
return OPAL_NAME_PRINT(*pname);
}
/************************************************************************/
/* v1.7, v1.8, and v1.10 (there was no v1.9) */
#elif (OPAL_MAJOR_VERSION == 1 && OPAL_MINOR_VERSION >= 7)
#include "ompi/proc/proc.h"
#include "ompi/mca/rte/rte.h"
#include "ompi/mca/rte/base/base.h"
#include "ompi/runtime/ompi_module_exchange.h"
/**************************
* Replicate functions that exist on master
**************************/
char* opal_get_proc_hostname(opal_proc_t *proc)
{
return proc->proc_hostname;
}
/**************************
* usNIC BTL-specific functions to hide differences between master and
* v1.8
**************************/
void usnic_compat_modex_send(int *rc,
mca_base_component_t *component,
struct opal_btl_usnic_modex_t *modexes,
size_t size)
{
*rc = ompi_modex_send(component, modexes, size);
}
void usnic_compat_modex_recv(int *rc,
mca_base_component_t *component,
opal_proc_t *proc,
struct opal_btl_usnic_modex_t **modexes,
size_t *size)
{
*rc = ompi_modex_recv(component, proc, (void*) modexes, size);
}
uint64_t usnic_compat_rte_hash_name(opal_process_name_t *pname)
{
return ompi_rte_hash_name(pname);
}
const char *usnic_compat_proc_name_print(opal_process_name_t *pname)
{
return OMPI_NAME_PRINT(pname);
}
/*
* In v1.8, we call ompi_free_list_init, and ignore some of these params
*/
int usnic_compat_free_list_init(opal_free_list_t *free_list,
size_t frag_size,
size_t frag_alignment,
opal_class_t* frag_class,
size_t payload_buffer_size,
size_t payload_buffer_alignment,
int num_elements_to_alloc,
int max_elements_to_alloc,
int num_elements_per_alloc,
struct mca_mpool_base_module_t *mpool,
int mpool_reg_flags,
void *unused0,
opal_free_list_item_init_fn_t item_init,
void *ctx)
{
return ompi_free_list_init_new(free_list,
frag_size,
frag_alignment,
frag_class,
payload_buffer_size,
payload_buffer_alignment,
num_elements_to_alloc,
max_elements_to_alloc,
num_elements_per_alloc,
mpool);
}
#endif /* OMPI version */
/************************************************************************/
/* BTL 2.0 and 3.0 compatibilty functions */
/*----------------------------------------------------------------------*/
/* The following functions are common between BTL 2.0 and 3.0 */
/* Responsible for sending "small" frags (reserve + *size <= max_frag_payload)
* in the same manner as btl_prepare_src. Must return a smaller amount than
* requested if the given convertor cannot process the entire (*size).
*/
static inline opal_btl_usnic_send_frag_t *
prepare_src_small(
struct opal_btl_usnic_module_t* module,
struct mca_btl_base_endpoint_t* endpoint,
struct opal_convertor_t* convertor,
uint8_t order,
size_t reserve,
size_t* size,
uint32_t flags)
{
opal_btl_usnic_send_frag_t *frag;
opal_btl_usnic_small_send_frag_t *sfrag;
size_t payload_len;
payload_len = *size + reserve;
assert(payload_len <= module->max_frag_payload); /* precondition */
sfrag = opal_btl_usnic_small_send_frag_alloc(module);
if (OPAL_UNLIKELY(NULL == sfrag)) {
return NULL;
}
frag = &sfrag->ssf_base;
/* In the case of a convertor, we will copy the data in now, since that is
* the cheapest way to discover how much we can actually send (since we know
* we will pack it anyway later). The alternative is to do all of the
* following:
* 1) clone_with_position(convertor) and see where the new position ends up
* actually being (see opal_btl_usnic_convertor_pack_peek). Otherwise we
* aren't fulfilling our contract w.r.t. (*size).
* 2) Add a bunch of branches checking for different cases, both here and in
* progress_sends
* 3) If we choose to defer the packing, we must clone the convertor because
* the PML owns it and might reuse it for another prepare_src call.
*
* Two convertor clones is likely to be at least as slow as just copying the
* data and might consume a similar amount of memory. Plus we still have to
* pack it later to send it.
*
* The reason we do not copy non-convertor buffer at this point is because
* we might still use INLINE for the send, and in that case we do not want
* to copy the data at all.
*/
if (OPAL_UNLIKELY(opal_convertor_need_buffers(convertor))) {
/* put user data just after end of 1st seg (upper layer header) */
assert(payload_len <= module->max_frag_payload);
usnic_convertor_pack_simple(
convertor,
(IOVBASE_TYPE*)(intptr_t)(frag->sf_base.uf_local_seg[0].seg_addr.lval + reserve),
*size,
size);
payload_len = reserve + *size;
frag->sf_base.uf_base.USNIC_SEND_LOCAL_COUNT = 1;
/* PML will copy header into beginning of segment */
frag->sf_base.uf_local_seg[0].seg_len = payload_len;
} else {
opal_convertor_get_current_pointer(convertor,
&sfrag->ssf_base.sf_base.uf_local_seg[1].seg_addr.pval);
frag->sf_base.uf_base.USNIC_SEND_LOCAL_COUNT = 2;
frag->sf_base.uf_local_seg[0].seg_len = reserve;
frag->sf_base.uf_local_seg[1].seg_len = *size;
}
frag->sf_base.uf_base.des_flags = flags;
frag->sf_endpoint = endpoint;
return frag;
}
static void *
pack_chunk_seg_chain_with_reserve(
struct opal_btl_usnic_module_t* module,
opal_btl_usnic_large_send_frag_t *lfrag,
size_t reserve_len,
opal_convertor_t *convertor,
size_t max_convertor_bytes,
size_t *convertor_bytes_packed)
{
opal_btl_usnic_chunk_segment_t *seg;
void *ret_ptr = NULL;
int n_segs;
uint8_t *copyptr;
size_t copylen;
size_t seg_space;
size_t max_data;
bool first_pass;
assert(NULL != lfrag);
assert(NULL != convertor_bytes_packed);
n_segs = 0;
*convertor_bytes_packed = 0;
first_pass = true;
while (*convertor_bytes_packed < max_convertor_bytes ||
first_pass) {
seg = opal_btl_usnic_chunk_segment_alloc(module);
if (OPAL_UNLIKELY(NULL == seg)) {
BTL_ERROR(("chunk segment allocation error"));
abort(); /* XXX */
}
++n_segs;
seg_space = module->max_chunk_payload;
copyptr = seg->ss_base.us_payload.raw;
if (first_pass) {
/* logic could accommodate >max, but currently doesn't */
assert(reserve_len <= module->max_chunk_payload);
ret_ptr = copyptr;
seg_space -= reserve_len;
copyptr += reserve_len;
}
/* now pack any convertor data */
if (*convertor_bytes_packed < max_convertor_bytes && seg_space > 0) {
copylen = max_convertor_bytes - *convertor_bytes_packed;
if (copylen > seg_space) {
copylen = seg_space;
}
usnic_convertor_pack_simple(convertor, copyptr, copylen, &max_data);
seg_space -= max_data;
*convertor_bytes_packed += max_data;
/* If unable to pack any of the remaining bytes, release the
* most recently allocated segment and finish processing.
*/
if (seg_space == module->max_chunk_payload) {
assert(max_data == 0); /* only way this can happen */
opal_btl_usnic_chunk_segment_return(module, seg);
break;
}
}
/* bozo checks */
assert(seg_space >= 0);
assert(seg_space < module->max_chunk_payload);
/* append segment of data to chain to send */
seg->ss_parent_frag = &lfrag->lsf_base;
seg->ss_len = module->max_chunk_payload - seg_space;
opal_list_append(&lfrag->lsf_seg_chain, &seg->ss_base.us_list.super);
#if MSGDEBUG1
opal_output(0, "%s: appending seg=%p, frag=%p, payload=%zd\n",
__func__, (void *)seg, (void *)lfrag,
(module->max_chunk_payload - seg_space));
#endif
first_pass = false;
}
return ret_ptr;
}
/* Responsible for handling "large" frags (reserve + *size > max_frag_payload)
* in the same manner as btl_prepare_src. Must return a smaller amount than
* requested if the given convertor cannot process the entire (*size).
*/
static opal_btl_usnic_send_frag_t *
prepare_src_large(
struct opal_btl_usnic_module_t* module,
struct mca_btl_base_endpoint_t* endpoint,
struct opal_convertor_t* convertor,
uint8_t order,
size_t reserve,
size_t* size,
uint32_t flags)
{
opal_btl_usnic_send_frag_t *frag;
opal_btl_usnic_large_send_frag_t *lfrag;
int rc;
/* Get holder for the msg */
lfrag = opal_btl_usnic_large_send_frag_alloc(module);
if (OPAL_UNLIKELY(NULL == lfrag)) {
return NULL;
}
frag = &lfrag->lsf_base;
/* The header location goes in SG[0], payload in SG[1]. If we are using a
* convertor then SG[1].seg_len is accurate but seg_addr is NULL. */
frag->sf_base.uf_base.USNIC_SEND_LOCAL_COUNT = 2;
/* stash header location, PML will write here */
frag->sf_base.uf_local_seg[0].seg_addr.pval = &lfrag->lsf_ompi_header;
frag->sf_base.uf_local_seg[0].seg_len = reserve;
/* make sure upper header small enough */
assert(reserve <= sizeof(lfrag->lsf_ompi_header));
if (OPAL_UNLIKELY(opal_convertor_need_buffers(convertor))) {
/* threshold == -1 means always pack eagerly */
if (mca_btl_usnic_component.pack_lazy_threshold >= 0 &&
*size >= (size_t)mca_btl_usnic_component.pack_lazy_threshold) {
MSGDEBUG1_OUT("packing frag %p on the fly", (void *)frag);
lfrag->lsf_pack_on_the_fly = true;
/* tell the PML we will absorb as much as possible while still
* respecting indivisible element boundaries in the convertor */
*size = opal_btl_usnic_convertor_pack_peek(convertor, *size);
/* Clone the convertor b/c we (the BTL) don't own it and the PML
* might mutate it after we return from this function. */
rc = opal_convertor_clone(convertor, &frag->sf_convertor,
/*copy_stack=*/true);
if (OPAL_UNLIKELY(OPAL_SUCCESS != rc)) {
BTL_ERROR(("unexpected convertor clone error"));
abort(); /* XXX */
}
}
else {
/* pack everything in the convertor into a chain of segments now,
* leaving space for the PML header in the first segment */
lfrag->lsf_base.sf_base.uf_local_seg[0].seg_addr.pval =
pack_chunk_seg_chain_with_reserve(module, lfrag, reserve,
convertor, *size, size);
}
/* We set SG[1] to {NULL,bytes_packed} so that various calculations
* by both PML and this BTL will be correct. For example, the PML adds
* up the bytes in the descriptor segments to determine if an MPI-level
* request is complete or not. */
frag->sf_base.uf_local_seg[1].seg_addr.pval = NULL;
frag->sf_base.uf_local_seg[1].seg_len = *size;
} else {
/* convertor not needed, just save the payload pointer in SG[1] */
lfrag->lsf_pack_on_the_fly = true;
opal_convertor_get_current_pointer(convertor,
&frag->sf_base.uf_local_seg[1].seg_addr.pval);
frag->sf_base.uf_local_seg[1].seg_len = *size;
}
frag->sf_base.uf_base.des_flags = flags;
frag->sf_endpoint = endpoint;
return frag;
}
/*----------------------------------------------------------------------*/
#if BTL_VERSION == 20
/*
* BTL 2.0 version of module.btl_prepare_src.
*
* Note the "user" data the PML wishes to communicate and return a descriptor
* that can be used for send or put. We create a frag (which is also a
* descriptor by virtue of its base class) and populate it with enough
* source information to complete a future send/put.
*
* We will create either a small send frag if < than an MTU, otherwise a large
* send frag. The convertor will be saved for deferred packing if the user
* buffer is noncontiguous. Otherwise it will be saved in one of the
* descriptor's SGEs.
*
* NOTE that the *only* reason this routine is allowed to return a size smaller
* than was requested is if the convertor cannot process the entire amount.
*/
mca_btl_base_descriptor_t*
opal_btl_usnic_prepare_src(
struct mca_btl_base_module_t* base_module,
struct mca_btl_base_endpoint_t* endpoint,
struct mca_mpool_base_registration_t* registration,
struct opal_convertor_t* convertor,
uint8_t order,
size_t reserve,
size_t* size,
uint32_t flags)
{
opal_btl_usnic_module_t *module = (opal_btl_usnic_module_t*) base_module;
opal_btl_usnic_send_frag_t *frag;
uint32_t payload_len;
#if MSGDEBUG2
size_t osize = *size;
#endif
/* Do we need to check the connectivity? If enabled, we'll check
the connectivity at either first send to peer X or first ACK to
peer X. */
opal_btl_usnic_check_connectivity(module, endpoint);
/*
* if total payload len fits in one MTU use small send, else large
*/
payload_len = *size + reserve;
if (payload_len <= module->max_frag_payload) {
frag = prepare_src_small(module, endpoint, convertor,
order, reserve, size, flags);
} else {
frag = prepare_src_large(module, endpoint, convertor,
order, reserve, size, flags);
}
#if MSGDEBUG2
opal_output(0, "prep_src: %s %s frag %p, size=%d+%u (was %u), conv=%p\n",
module->fabric_info->fabric_attr->name,
(reserve + *size) <= module->max_frag_payload?"small":"large",
(void *)frag, (int)reserve, (unsigned)*size, (unsigned)osize,
(void *)convertor);
#if MSGDEBUG1
{
unsigned i;
mca_btl_base_descriptor_t *desc = &frag->sf_base.uf_base;
for (i=0; i<desc->USNIC_SEND_LOCAL_COUNT; ++i) {
opal_output(0, " %d: ptr:%p len:%d\n", i,
(void *)desc->USNIC_SEND_LOCAL[i].seg_addr.pval,
desc->USNIC_SEND_LOCAL[i].seg_len);
}
}
#endif
#endif
return &frag->sf_base.uf_base;
}
/*
* BTL 2.0 prepare_dst function (this function does not exist in BTL
* 3.0).
*/
mca_btl_base_descriptor_t*
opal_btl_usnic_prepare_dst(
struct mca_btl_base_module_t* base_module,
struct mca_btl_base_endpoint_t* endpoint,
struct mca_mpool_base_registration_t* registration,
struct opal_convertor_t* convertor,
uint8_t order,
size_t reserve,
size_t* size,
uint32_t flags)
{
opal_btl_usnic_put_dest_frag_t *pfrag;
opal_btl_usnic_module_t *module;
void *data_ptr;
module = (opal_btl_usnic_module_t *)base_module;
/* allocate a fragment for this */
pfrag = (opal_btl_usnic_put_dest_frag_t *)
opal_btl_usnic_put_dest_frag_alloc(module);
if (NULL == pfrag) {
return NULL;
}
/* find start of the data */
opal_convertor_get_current_pointer(convertor, (void **) &data_ptr);
/* make a seg entry pointing at data_ptr */
pfrag->uf_remote_seg[0].seg_addr.pval = data_ptr;
pfrag->uf_remote_seg[0].seg_len = *size;
pfrag->uf_base.order = order;
pfrag->uf_base.des_flags = flags;
#if MSGDEBUG2
opal_output(0, "prep_dst size=%d, addr=%p, pfrag=%p\n", (int)*size,
data_ptr, (void *)pfrag);
#endif
return &pfrag->uf_base;
}
/*
* BTL 2.0 version of module.btl_put.
*
* Emulate an RDMA put. We'll send the remote address
* across to the other side so it will know where to put the data
*/
int opal_btl_usnic_put(
struct mca_btl_base_module_t *btl,
struct mca_btl_base_endpoint_t *endpoint,
struct mca_btl_base_descriptor_t *desc)
{
int rc;
opal_btl_usnic_send_frag_t *frag;
frag = (opal_btl_usnic_send_frag_t *)desc;
opal_btl_usnic_compute_sf_size(frag);
frag->sf_ack_bytes_left = frag->sf_size;
#if MSGDEBUG2
opal_output(0, "usnic_put, frag=%p, size=%d\n", (void *)frag,
(int)frag->sf_size);
#if MSGDEBUG1
{ unsigned i;
for (i=0; i<desc->USNIC_PUT_LOCAL_COUNT; ++i) {
opal_output(0, " %d: ptr:%p len:%d%s\n", i,
desc->USNIC_PUT_LOCAL[i].seg_addr.pval,
desc->USNIC_PUT_LOCAL[i].seg_len,
(i==0)?" (put local)":"");
}
for (i=0; i<desc->USNIC_PUT_REMOTE_COUNT; ++i) {
opal_output(0, " %d: ptr:%p len:%d%s\n", i,
desc->USNIC_PUT_REMOTE[i].seg_addr.pval,
desc->USNIC_PUT_REMOTE[i].seg_len,
(i==0)?" (put remote)":"");
}
}
#endif
#endif
/* RFXX copy out address - why does he not use our provided holder? */
/* JMS What does this mean? ^^ */
frag->sf_base.uf_remote_seg[0].seg_addr.pval =
desc->USNIC_PUT_REMOTE->seg_addr.pval;
rc = opal_btl_usnic_finish_put_or_send((opal_btl_usnic_module_t *)btl,
(opal_btl_usnic_endpoint_t *)endpoint,
frag,
/*tag=*/MCA_BTL_NO_ORDER);
return rc;
}
/*----------------------------------------------------------------------*/
#elif BTL_VERSION == 30
/*
* BTL 3.0 prepare_src function.
*
* This function is only used for sending PML fragments (not putting
* or getting fragments).
*
* Note the "user" data the PML wishes to communicate and return a
* descriptor. We create a frag (which is also a descriptor by virtue
* of its base class) and populate it with enough source information
* to complete a future send.
*
* Recall that the usnic BTL's max_send_size is almost certainly
* larger than the MTU (by default, max_send_size is either 25K or
* 150K). Therefore, the PML may give us a fragment up to
* max_send_size in this function. Hence, we make the decision here
* as to whether it's a "small" fragment (i.e., size <= MTU, meaning
* that it fits in a single datagram) or a "large" fragment (i.e.,
* size > MTU, meaning that it must be chunked into multiple
* datagrams).
*
* The convertor will be saved for deferred packing if the user buffer
* is noncontiguous. Otherwise, it will be saved in one of the
* descriptor's SGEs.
*
* NOTE that the *only* reason this routine is allowed to return a size smaller
* than was requested is if the convertor cannot process the entire amount.
*/
struct mca_btl_base_descriptor_t *
opal_btl_usnic_prepare_src(struct mca_btl_base_module_t *base_module,
struct mca_btl_base_endpoint_t *endpoint,
struct opal_convertor_t *convertor,
uint8_t order,
size_t reserve,
size_t *size,
uint32_t flags)
{
opal_btl_usnic_module_t *module = (opal_btl_usnic_module_t*) base_module;
opal_btl_usnic_send_frag_t *frag;
uint32_t payload_len;
#if MSGDEBUG2
size_t osize = *size;
#endif
/* Do we need to check the connectivity? If enabled, we'll check
the connectivity at either first send to peer X or first ACK to
peer X. */
opal_btl_usnic_check_connectivity(module, endpoint);
/*
* if total payload len fits in one MTU use small send, else large
*/
payload_len = *size + reserve;
if (payload_len <= module->max_frag_payload) {
frag = prepare_src_small(module, endpoint, convertor,
order, reserve, size, flags);
} else {
frag = prepare_src_large(module, endpoint, convertor,
order, reserve, size, flags);
}
#if MSGDEBUG2
opal_output(0, "prep_src: %s %s frag %p, size=%d+%u (was %u), conv=%p\n",
module->fabric_info->fabric_attr->name,
(reserve + *size) <= module->max_frag_payload?"small":"large",
(void *)frag, (int)reserve, (unsigned)*size, (unsigned)osize,
(void *)convertor);
#if MSGDEBUG1
{
unsigned i;
mca_btl_base_descriptor_t *desc = &frag->sf_base.uf_base;
for (i=0; i<desc->USNIC_SEND_LOCAL_COUNT; ++i) {
opal_output(0, " %d: ptr:%p len:%d\n", i,
(void *)desc->USNIC_SEND_LOCAL[i].seg_addr.pval,
desc->USNIC_SEND_LOCAL[i].seg_len);
}
}
#endif
#endif
return &frag->sf_base.uf_base;
}
/*
* BTL 3.0 version of module.btl_put.
*
* Emulate an RDMA put. We'll send the remote address across to the
* other side so it will know where to put the data.
*
* Note that this function is only ever called with contiguous
* buffers, so a convertor is not necessary.
*/
int
opal_btl_usnic_put(struct mca_btl_base_module_t *base_module,
struct mca_btl_base_endpoint_t *endpoint,
void *local_address, uint64_t remote_address,
struct mca_btl_base_registration_handle_t *local_handle,
struct mca_btl_base_registration_handle_t *remote_handle,
size_t size, int flags, int order,
mca_btl_base_rdma_completion_fn_t cbfunc,
void *cbcontext, void *cbdata)
{
opal_btl_usnic_send_frag_t *sfrag;
opal_btl_usnic_module_t *module = (opal_btl_usnic_module_t*) base_module;
/* At least for the moment, continue to make a descriptor, like we
used to in BTL 2.0 */
if (size <= module->max_frag_payload) {
/* Small send fragment -- the whole thing fits in one MTU
(i.e., a single chunk) */
opal_btl_usnic_small_send_frag_t *ssfrag;
ssfrag = opal_btl_usnic_small_send_frag_alloc(module);
if (OPAL_UNLIKELY(NULL == ssfrag)) {
return OPAL_ERR_OUT_OF_RESOURCE;
}
sfrag = &ssfrag->ssf_base;
} else {
/* Large send fragment -- need more than one MTU (i.e.,
multiple chunks) */
opal_btl_usnic_large_send_frag_t *lsfrag;
lsfrag = opal_btl_usnic_large_send_frag_alloc(module);
if (OPAL_UNLIKELY(NULL == lsfrag)) {
return OPAL_ERR_OUT_OF_RESOURCE;
}
lsfrag->lsf_pack_on_the_fly = true;
sfrag = &lsfrag->lsf_base;
}
sfrag->sf_endpoint = endpoint;
sfrag->sf_size = size;
sfrag->sf_ack_bytes_left = size;
opal_btl_usnic_frag_t *frag;
frag = &sfrag->sf_base;
frag->uf_local_seg[0].seg_len = size;
frag->uf_local_seg[0].seg_addr.pval = local_address;
frag->uf_remote_seg[0].seg_len = size;
frag->uf_remote_seg[0].seg_addr.pval =
(void *)(uintptr_t) remote_address;
mca_btl_base_descriptor_t *desc;
desc = &frag->uf_base;
desc->des_segment_count = 1;
desc->des_segments = &frag->uf_local_seg[0];
/* This is really the wrong cbfunc type, but we'll cast it to
the Right type before we use it. So it'll be ok. */
desc->des_cbfunc = (mca_btl_base_completion_fn_t) cbfunc;
desc->des_cbdata = cbdata;
desc->des_context = cbcontext;
desc->des_flags = flags;
desc->order = order;
int rc;
rc = opal_btl_usnic_finish_put_or_send(module,
(opal_btl_usnic_endpoint_t *)endpoint,
sfrag,
/*tag=*/MCA_BTL_NO_ORDER);
return rc;
}
#endif /* BTL_VERSION */
Показать git blame Копировать постоянную ссылку