ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
2504da1ac9
openmpi/opal/mca/hwloc/base/hwloc_base_util.c
Jeff Squyres 6af6809dc2 * Fix some comments. 
* Use the hwloc logical index, not the os_index.  Fixes problems with
   opal_hwloc_base_cset2str() output (e.g., --report-bindings output)
   on machines where the os_index is not tightly packed in the range
   ![0, n-1]

This commit was SVN r27394.
2012-10-03 09:33:40 +00:00

1868 строки
62 KiB
C
Исходник Ответственный История

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2006 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2011-2012 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2012 Los Alamos National Security, LLC.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "opal_config.h"
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include "opal/runtime/opal.h"
#include "opal/constants.h"
#include "opal/util/argv.h"
#include "opal/util/output.h"
#include "opal/util/show_help.h"
#include "opal/threads/tsd.h"
#include "opal/mca/hwloc/hwloc.h"
#include "opal/mca/hwloc/base/base.h"
/*
* Provide the hwloc object that corresponds to the given
* LOGICAL processor id. Remember: "processor" here [usually] means "core" --
* except that on some platforms, hwloc won't find any cores; it'll
* only find PUs (!). On such platforms, then do the same calculation
* but with PUs instead of COREs.
*/
static hwloc_obj_t get_pu(hwloc_topology_t topo, int lid)
{
hwloc_obj_type_t obj_type = HWLOC_OBJ_CORE;
hwloc_obj_t obj;
/* hwloc isn't able to find cores on all platforms. Example:
PPC64 running RHEL 5.4 (linux kernel 2.6.18) only reports NUMA
nodes and PU's. Fine.
However, note that hwloc_get_obj_by_type() will return NULL in
2 (effectively) different cases:
- no objects of the requested type were found
- the Nth object of the requested type was not found
So first we have to see if we can find *any* cores by looking
for the 0th core. If we find it, then try to find the Nth
core. Otherwise, try to find the Nth PU. */
if (NULL == hwloc_get_obj_by_type(topo, HWLOC_OBJ_CORE, 0)) {
obj_type = HWLOC_OBJ_PU;
}
/* Now do the actual lookup. */
obj = hwloc_get_obj_by_type(topo, obj_type, lid);
if (NULL == obj) {
opal_show_help("help-opal-hwloc-base.txt",
"logical-cpu-not-found", true,
opal_hwloc_base_cpu_set);
return NULL;
}
/* Found the right core (or PU). Return the object */
return obj;
}
/* determine the node-level available cpuset based on
* online vs allowed vs user-specified cpus
*/
int opal_hwloc_base_filter_cpus(hwloc_topology_t topo)
{
hwloc_obj_t root, pu;
hwloc_cpuset_t avail = NULL, pucpus, res;
opal_hwloc_topo_data_t *sum;
char **ranges=NULL, **range=NULL;
int idx, cpu, start, end;
root = hwloc_get_root_obj(topo);
if (NULL == root->userdata) {
root->userdata = (void*)OBJ_NEW(opal_hwloc_topo_data_t);
}
sum = (opal_hwloc_topo_data_t*)root->userdata;
/* should only ever enter here once, but check anyway */
if (NULL != sum->available) {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:filter_cpus specified - already done"));
return OPAL_SUCCESS;
}
/* process any specified default cpu set against this topology */
if (NULL == opal_hwloc_base_cpu_set) {
/* get the root available cpuset */
avail = hwloc_bitmap_alloc();
hwloc_bitmap_and(avail, root->online_cpuset, root->allowed_cpuset);
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base: no cpus specified - using root available cpuset"));
} else {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base: filtering cpuset"));
/* find the specified logical cpus */
ranges = opal_argv_split(opal_hwloc_base_cpu_set, ',');
avail = hwloc_bitmap_alloc();
hwloc_bitmap_zero(avail);
res = hwloc_bitmap_alloc();
pucpus = hwloc_bitmap_alloc();
for (idx=0; idx < opal_argv_count(ranges); idx++) {
range = opal_argv_split(ranges[idx], '-');
switch (opal_argv_count(range)) {
case 1:
/* only one cpu given - get that object */
cpu = strtoul(range[0], NULL, 10);
if (NULL == (pu = get_pu(topo, cpu))) {
opal_argv_free(ranges);
opal_argv_free(range);
return OPAL_ERROR;
}
hwloc_bitmap_and(pucpus, pu->online_cpuset, pu->allowed_cpuset);
hwloc_bitmap_or(res, avail, pucpus);
hwloc_bitmap_copy(avail, res);
break;
case 2:
/* range given */
start = strtoul(range[0], NULL, 10);
end = strtoul(range[1], NULL, 10);
for (cpu=start; cpu <= end; cpu++) {
if (NULL == (pu = get_pu(topo, cpu))) {
opal_argv_free(ranges);
opal_argv_free(range);
hwloc_bitmap_free(avail);
return OPAL_ERROR;
}
hwloc_bitmap_and(pucpus, pu->online_cpuset, pu->allowed_cpuset);
hwloc_bitmap_or(res, avail, pucpus);
hwloc_bitmap_copy(avail, res);
}
break;
default:
return OPAL_ERR_BAD_PARAM;
}
opal_argv_free(range);
}
if (NULL != ranges) {
opal_argv_free(ranges);
}
hwloc_bitmap_free(res);
hwloc_bitmap_free(pucpus);
}
/* cache this info */
sum->available = avail;
return OPAL_SUCCESS;
}
static void fill_cache_line_size(void)
{
int i = 0;
unsigned size;
hwloc_obj_t obj;
bool found = false;
/* Look for the smallest L2 cache size */
size = 4096;
while (1) {
obj = opal_hwloc_base_get_obj_by_type(opal_hwloc_topology,
HWLOC_OBJ_CACHE, 2,
i, OPAL_HWLOC_LOGICAL);
if (NULL == obj) {
break;
} else {
found = true;
if (NULL != obj->attr &&
size > obj->attr->cache.linesize) {
size = obj->attr->cache.linesize;
}
}
++i;
}
/* If we found an L2 cache size in the hwloc data, save it in
opal_cache_line_size. Otherwise, we'll leave whatever default
was set in opal_init.c */
if (found) {
opal_cache_line_size = (int) size;
}
}
int opal_hwloc_base_get_topology(void)
{
int rc;
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_topology"));
if (0 != hwloc_topology_init(&opal_hwloc_topology) ||
0 != hwloc_topology_set_flags(opal_hwloc_topology,
(HWLOC_TOPOLOGY_FLAG_WHOLE_SYSTEM |
HWLOC_TOPOLOGY_FLAG_WHOLE_IO)) ||
0 != hwloc_topology_load(opal_hwloc_topology)) {
return OPAL_ERR_NOT_SUPPORTED;
}
/* filter the cpus thru any default cpu set */
rc = opal_hwloc_base_filter_cpus(opal_hwloc_topology);
if (OPAL_SUCCESS != rc) {
return rc;
}
/* fill opal_cache_line_size global with the smallest L1 cache
line size */
fill_cache_line_size();
return rc;
}
static void free_object(hwloc_obj_t obj)
{
opal_hwloc_obj_data_t *data;
unsigned k;
/* free any data hanging on this object */
if (NULL != obj->userdata) {
data = (opal_hwloc_obj_data_t*)obj->userdata;
OBJ_RELEASE(data);
obj->userdata = NULL;
}
/* loop thru our children */
for (k=0; k < obj->arity; k++) {
free_object(obj->children[k]);
}
}
void opal_hwloc_base_free_topology(hwloc_topology_t topo)
{
hwloc_obj_t obj;
opal_hwloc_topo_data_t *rdata;
unsigned k;
obj = hwloc_get_root_obj(topo);
/* release the root-level userdata */
if (NULL != obj->userdata) {
rdata = (opal_hwloc_topo_data_t*)obj->userdata;
OBJ_RELEASE(rdata);
obj->userdata = NULL;
}
/* now recursively descend and release userdata
* in the rest of the objects
*/
for (k=0; k < obj->arity; k++) {
free_object(obj->children[k]);
}
hwloc_topology_destroy(topo);
}
void opal_hwloc_base_get_local_cpuset(void)
{
hwloc_obj_t root;
hwloc_cpuset_t base_cpus;
if (NULL != opal_hwloc_topology) {
if (NULL == opal_hwloc_my_cpuset) {
opal_hwloc_my_cpuset = hwloc_bitmap_alloc();
}
/* get the cpus we are bound to */
if (hwloc_get_cpubind(opal_hwloc_topology,
opal_hwloc_my_cpuset,
HWLOC_CPUBIND_PROCESS) < 0) {
/* we are not bound - use the root's available cpuset */
root = hwloc_get_root_obj(opal_hwloc_topology);
base_cpus = opal_hwloc_base_get_available_cpus(opal_hwloc_topology, root);
hwloc_bitmap_copy(opal_hwloc_my_cpuset, base_cpus);
}
}
}
int opal_hwloc_base_report_bind_failure(const char *file,
int line,
const char *msg, int rc)
{
static int already_reported = 0;
if (!already_reported &&
OPAL_HWLOC_BASE_MBFA_SILENT != opal_hwloc_base_mbfa) {
char hostname[64];
gethostname(hostname, sizeof(hostname));
opal_show_help("help-opal-hwloc-base.txt", "mbind failure", true,
hostname, getpid(), file, line, msg,
(OPAL_HWLOC_BASE_MBFA_WARN == opal_hwloc_base_mbfa) ?
"Warning -- your job will continue, but possibly with degraded performance" :
"ERROR -- your job may abort or behave erraticly");
already_reported = 1;
return rc;
}
return OPAL_SUCCESS;
}
hwloc_cpuset_t opal_hwloc_base_get_available_cpus(hwloc_topology_t topo,
hwloc_obj_t obj)
{
hwloc_obj_t root;
hwloc_cpuset_t avail, specd=NULL;
opal_hwloc_topo_data_t *rdata;
opal_hwloc_obj_data_t *data;
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base: get available cpus"));
/* get the node-level information */
root = hwloc_get_root_obj(topo);
rdata = (opal_hwloc_topo_data_t*)root->userdata;
/* bozo check */
if (NULL == rdata) {
rdata = OBJ_NEW(opal_hwloc_topo_data_t);
root->userdata = (void*)rdata;
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_available_cpus first time - filtering cpus"));
}
/* ensure the topo-level cpuset was prepared */
opal_hwloc_base_filter_cpus(topo);
/* are we asking about the root object? */
if (obj == root) {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_available_cpus root object"));
return rdata->available;
}
/* some hwloc object types don't have cpus */
if (NULL == obj->online_cpuset || NULL == obj->allowed_cpuset) {
return NULL;
}
/* see if we already have this info */
if (NULL == (data = (opal_hwloc_obj_data_t*)obj->userdata)) {
/* nope - create the object */
data = OBJ_NEW(opal_hwloc_obj_data_t);
obj->userdata = (void*)data;
}
/* do we have the cpuset */
if (NULL != data->available) {
return data->available;
}
/* find the available processors on this object */
avail = hwloc_bitmap_alloc();
hwloc_bitmap_and(avail, obj->online_cpuset, obj->allowed_cpuset);
/* filter this against the node-available processors */
if (NULL == rdata->available) {
hwloc_bitmap_free(avail);
return NULL;
}
specd = hwloc_bitmap_alloc();
hwloc_bitmap_and(specd, avail, rdata->available);
/* cache the info */
data->available = specd;
/* cleanup */
hwloc_bitmap_free(avail);
return specd;
}
static void df_search_cores(hwloc_obj_t obj, unsigned int *cnt)
{
unsigned k;
if (HWLOC_OBJ_CORE == obj->type) {
*cnt += 1;
return;
}
for (k=0; k < obj->arity; k++) {
df_search_cores(obj->children[k], cnt);
}
return;
}
/* determine if there is a single cpu in a bitmap */
bool opal_hwloc_base_single_cpu(hwloc_cpuset_t cpuset)
{
int i;
bool one=false;
/* count the number of bits that are set - there is
* one bit for each available pu. We could just
* subtract the first and last indices, but there
* may be "holes" in the bitmap corresponding to
* offline or unallowed cpus - so we have to
* search for them. Return false if we anything
* other than one
*/
for (i=hwloc_bitmap_first(cpuset);
i <= hwloc_bitmap_last(cpuset);
i++) {
if (hwloc_bitmap_isset(cpuset, i)) {
if (one) {
return false;
}
one = true;
}
}
return one;
}
/* get the number of pu's under a given hwloc object */
unsigned int opal_hwloc_base_get_npus(hwloc_topology_t topo,
hwloc_obj_t obj)
{
opal_hwloc_obj_data_t *data;
int i;
unsigned int cnt;
hwloc_cpuset_t cpuset;
/* if the object is a hwthread (i.e., HWLOC_OBJ_PU),
* then the answer is always 1 since there isn't
* anything underneath it
*/
if (HWLOC_OBJ_PU == obj->type) {
return 1;
}
/* if the object is a core (i.e., HWLOC_OBJ_CORE) and
* we are NOT treating hwthreads as independent cpus,
* then the answer is also 1 since we don't allow
* you to use the underlying hwthreads as separate
* entities
*/
if (HWLOC_OBJ_CORE == obj->type &&
!opal_hwloc_use_hwthreads_as_cpus) {
return 1;
}
data = (opal_hwloc_obj_data_t*)obj->userdata;
if (NULL == data || 0 == data->npus) {
if (!opal_hwloc_use_hwthreads_as_cpus) {
/* if we are treating cores as cpus, then we really
* want to know how many cores are in this object.
* hwloc sets a bit for each "pu", so we can't just
* count bits in this case as there may be more than
* one hwthread/core. Instead, find the number of cores
* in the system
*
* NOTE: remember, hwloc can't find "cores" in all
* environments. So first check to see if it found
* "core" at all.
*/
if (NULL != hwloc_get_obj_by_type(topo, HWLOC_OBJ_CORE, 0)) {
/* starting at the incoming obj, do a down-first search
* and count the number of cores under it
*/
cnt = 0;
df_search_cores(obj, &cnt);
}
} else {
/* if we are treating cores as cpus, or the system can't detect
* "cores", then get the available cpuset for this object - this will
* create and store the data
*/
if (NULL == (cpuset = opal_hwloc_base_get_available_cpus(topo, obj))) {
return 0;
}
/* count the number of bits that are set - there is
* one bit for each available pu. We could just
* subtract the first and last indices, but there
* may be "holes" in the bitmap corresponding to
* offline or unallowed cpus - so we have to
* search for them
*/
for (i=hwloc_bitmap_first(cpuset), cnt=0;
i <= hwloc_bitmap_last(cpuset);
i++) {
if (hwloc_bitmap_isset(cpuset, i)) {
cnt++;
}
}
}
/* cache the info */
if (NULL == data) {
data = OBJ_NEW(opal_hwloc_obj_data_t);
obj->userdata = (void*)data;
}
data->npus = cnt;
}
return data->npus;
}
unsigned int opal_hwloc_base_get_obj_idx(hwloc_topology_t topo,
hwloc_obj_t obj,
opal_hwloc_resource_type_t rtype)
{
unsigned cache_level=0;
opal_hwloc_obj_data_t *data;
hwloc_obj_t ptr;
unsigned int nobjs, i;
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_idx"));
/* see if we already have the info */
data = (opal_hwloc_obj_data_t*)obj->userdata;
if (NULL == data) {
data = OBJ_NEW(opal_hwloc_obj_data_t);
obj->userdata = (void*)data;
}
if (data->idx < UINT_MAX) {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_idx already have data: %u",
data->idx));
return data->idx;
}
/* determine the number of objects of this type */
if (HWLOC_OBJ_CACHE == obj->type) {
cache_level = obj->attr->cache.depth;
}
nobjs = opal_hwloc_base_get_nbobjs_by_type(topo, obj->type, cache_level, rtype);
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_idx found %u objects of type %s:%u",
nobjs, hwloc_obj_type_string(obj->type), cache_level));
/* find this object */
for (i=0; i < nobjs; i++) {
ptr = opal_hwloc_base_get_obj_by_type(topo, obj->type, cache_level, i, rtype);
if (ptr == obj) {
data->idx = i;
return i;
}
}
/* if we get here, it wasn't found */
opal_show_help("help-opal-hwloc-base.txt",
"obj-idx-failed", true,
hwloc_obj_type_string(obj->type), cache_level);
return UINT_MAX;
}
/* hwloc treats cache objects as special
* cases. Instead of having a unique type for each cache level,
* there is a single cache object type, and the level is encoded
* in an attribute union. So looking for cache objects involves
* a multi-step test :-(
*
* And, of course, we make things even worse because we don't
* always care about what is physically or logically present,
* but rather what is available to us. For example, we don't
* want to map or bind to a cpu that is offline, or one that
* we aren't allowed by use by the OS. So we have to also filter
* the search to avoid those objects that don't have any cpus
* we can use :-((
*/
static hwloc_obj_t df_search(hwloc_topology_t topo,
hwloc_obj_t start,
hwloc_obj_type_t target,
unsigned cache_level,
unsigned int nobj,
opal_hwloc_resource_type_t rtype,
unsigned int *idx,
unsigned int *num_objs)
{
unsigned k;
hwloc_obj_t obj;
opal_hwloc_obj_data_t *data;
if (target == start->type) {
if (HWLOC_OBJ_CACHE == start->type && cache_level != start->attr->cache.depth) {
goto notfound;
}
if (OPAL_HWLOC_LOGICAL == rtype) {
/* the hwloc tree is composed of LOGICAL objects, so the only
* time we come here is when we are looking for logical caches
*/
if (NULL != num_objs) {
/* we are counting the number of caches at this level */
*num_objs += 1;
} else if (*idx == nobj) {
/* found the specific instance of the cache level being sought */
return start;
}
*idx += 1;
return NULL;
}
if (OPAL_HWLOC_PHYSICAL == rtype) {
/* the PHYSICAL object number is stored as the os_index. When
* counting physical objects, we can't just count the number
* that are in the hwloc tree as the only entries in the tree
* are LOGICAL objects - i.e., any physical gaps won't show. So
* we instead return the MAX os_index, as this is the best we
* can do to tell you how many PHYSICAL objects are in the system.
*
* NOTE: if the last PHYSICAL object is not present (e.g., the last
* socket on the node is empty), then the count we return will
* be wrong!
*/
if (NULL != num_objs) {
/* we are counting the number of these objects */
if (*num_objs < (unsigned int)start->os_index) {
*num_objs = (unsigned int)start->os_index;
}
} else if (*idx == nobj) {
/* found the specific instance of the cache level being sought */
return start;
}
*idx += 1;
return NULL;
}
if (OPAL_HWLOC_AVAILABLE == rtype) {
/* check - do we already know the index of this object */
data = (opal_hwloc_obj_data_t*)start->userdata;
if (NULL == data) {
data = OBJ_NEW(opal_hwloc_obj_data_t);
start->userdata = (void*)data;
}
/* if we already know our location and it matches,
* then we are good
*/
if (UINT_MAX != data->idx && data->idx == nobj) {
return start;
}
/* see if we already know our available cpuset */
if (NULL == data->available) {
data->available = opal_hwloc_base_get_available_cpus(topo, start);
}
if (NULL != data->available && !hwloc_bitmap_iszero(data->available)) {
if (NULL != num_objs) {
*num_objs += 1;
} else if (*idx == nobj) {
/* cache the location */
data->idx = *idx;
return start;
}
*idx += 1;
}
return NULL;
}
/* if it wasn't one of the above, then we are lost */
return NULL;
}
notfound:
for (k=0; k < start->arity; k++) {
obj = df_search(topo, start->children[k], target, cache_level, nobj, rtype, idx, num_objs);
if (NULL != obj) {
return obj;
}
}
return NULL;
}
unsigned int opal_hwloc_base_get_nbobjs_by_type(hwloc_topology_t topo,
hwloc_obj_type_t target,
unsigned cache_level,
opal_hwloc_resource_type_t rtype)
{
unsigned int num_objs, idx;
hwloc_obj_t obj;
opal_list_item_t *item;
opal_hwloc_summary_t *sum;
opal_hwloc_topo_data_t *data;
int rc;
/* bozo check */
if (NULL == topo) {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_nbobjs NULL topology"));
return 0;
}
/* if we want the number of LOGICAL objects, we can just
* use the hwloc accessor to get it, unless it is a CACHE
* as these are treated as special cases
*/
if (OPAL_HWLOC_LOGICAL == rtype && HWLOC_OBJ_CACHE != target) {
/* we should not get an error back, but just in case... */
if (0 > (rc = hwloc_get_nbobjs_by_type(topo, target))) {
opal_output(0, "UNKNOWN HWLOC ERROR");
return 0;
}
return rc;
}
/* for everything else, we have to do some work */
num_objs = 0;
idx = 0;
obj = hwloc_get_root_obj(topo);
/* first see if the topology already has this summary */
data = (opal_hwloc_topo_data_t*)obj->userdata;
if (NULL == data) {
data = OBJ_NEW(opal_hwloc_topo_data_t);
obj->userdata = (void*)data;
} else {
for (item = opal_list_get_first(&data->summaries);
item != opal_list_get_end(&data->summaries);
item = opal_list_get_next(item)) {
sum = (opal_hwloc_summary_t*)item;
if (target == sum->type &&
cache_level == sum->cache_level &&
rtype == sum->rtype) {
/* yep - return the value */
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_nbojbs pre-existing data %u of %s:%u",
sum->num_objs, hwloc_obj_type_string(target), cache_level));
return sum->num_objs;
}
}
}
/* don't already know it - go get it */
df_search(topo, obj, target, cache_level, 0, rtype, &idx, &num_objs);
/* cache the results for later */
sum = OBJ_NEW(opal_hwloc_summary_t);
sum->type = target;
sum->cache_level = cache_level;
sum->num_objs = num_objs;
sum->rtype = rtype;
opal_list_append(&data->summaries, &sum->super);
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:get_nbojbs computed data %u of %s:%u",
num_objs, hwloc_obj_type_string(target), cache_level));
return num_objs;
}
static hwloc_obj_t df_search_min_bound(hwloc_topology_t topo,
hwloc_obj_t start,
hwloc_obj_type_t target,
unsigned cache_level,
unsigned int *min_bound)
{
unsigned k;
hwloc_obj_t obj, save=NULL;
opal_hwloc_obj_data_t *data;
if (target == start->type) {
if (HWLOC_OBJ_CACHE == start->type && cache_level != start->attr->cache.depth) {
goto notfound;
}
/* see how many procs are bound to us */
data = (opal_hwloc_obj_data_t*)start->userdata;
if (NULL == data) {
data = OBJ_NEW(opal_hwloc_obj_data_t);
start->userdata = data;
}
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:min_bound_under_obj object %s:%u nbound %u min %u",
hwloc_obj_type_string(target), start->logical_index,
data->num_bound, *min_bound));
if (data->num_bound < *min_bound) {
*min_bound = data->num_bound;
return start;
}
/* if we have more procs bound to us than the min, return NULL */
return NULL;
}
notfound:
for (k=0; k < start->arity; k++) {
obj = df_search_min_bound(topo, start->children[k], target, cache_level, min_bound);
if (NULL != obj) {
save = obj;
}
/* if the target level is HWTHREAD and we are NOT treating
* hwthreads as separate cpus, then we can only consider
* the 0th hwthread on a core
*/
if (HWLOC_OBJ_CORE == start->type && HWLOC_OBJ_PU == target &&
!opal_hwloc_use_hwthreads_as_cpus) {
break;
}
}
return save;
}
hwloc_obj_t opal_hwloc_base_find_min_bound_target_under_obj(hwloc_topology_t topo,
hwloc_obj_t obj,
hwloc_obj_type_t target,
unsigned cache_level)
{
unsigned int min_bound;
hwloc_obj_t loc;
/* bozo check */
if (NULL == topo || NULL == obj) {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:find_min_bound_under_obj NULL %s",
(NULL == topo) ? "topology" : "object"));
return NULL;
}
/* if the object and target is the same type, then there is
* nothing under it, so just return itself
*/
if (target == obj->type) {
/* again, we have to treat caches differently as
* the levels distinguish them
*/
if (HWLOC_OBJ_CACHE == target &&
cache_level < obj->attr->cache.depth) {
goto moveon;
}
return obj;
}
moveon:
/* the hwloc accessors all report at the topo level,
* so we have to do some work
*/
min_bound = UINT_MAX;
loc = df_search_min_bound(topo, obj, target, cache_level, &min_bound);
if (HWLOC_OBJ_CACHE == target) {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:min_bound_under_obj found min bound of %u on %s:%u:%u",
min_bound, hwloc_obj_type_string(target),
cache_level, loc->logical_index));
} else {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:min_bound_under_obj found min bound of %u on %s:%u",
min_bound, hwloc_obj_type_string(target), loc->logical_index));
}
return loc;
}
/* as above, only return the Nth instance of the specified object
* type from inside the topology
*/
hwloc_obj_t opal_hwloc_base_get_obj_by_type(hwloc_topology_t topo,
hwloc_obj_type_t target,
unsigned cache_level,
unsigned int instance,
opal_hwloc_resource_type_t rtype)
{
unsigned int idx;
hwloc_obj_t obj;
/* bozo check */
if (NULL == topo) {
return NULL;
}
/* if we want the nth LOGICAL object, we can just
* use the hwloc accessor to get it, unless it is a CACHE
* as these are treated as special cases
*/
if (OPAL_HWLOC_LOGICAL == rtype && HWLOC_OBJ_CACHE != target) {
return hwloc_get_obj_by_type(topo, target, instance);
}
/* for everything else, we have to do some work */
idx = 0;
obj = hwloc_get_root_obj(topo);
return df_search(topo, obj, target, cache_level, instance, rtype, &idx, NULL);
}
static void df_clear(hwloc_topology_t topo,
hwloc_obj_t start)
{
unsigned k;
opal_hwloc_obj_data_t *data;
/* see how many procs are bound to us */
data = (opal_hwloc_obj_data_t*)start->userdata;
if (NULL != data) {
data->num_bound = 0;
}
for (k=0; k < start->arity; k++) {
df_clear(topo, start->children[k]);
}
}
void opal_hwloc_base_clear_usage(hwloc_topology_t topo)
{
hwloc_obj_t root;
unsigned k;
/* bozo check */
if (NULL == topo) {
OPAL_OUTPUT_VERBOSE((5, opal_hwloc_base_output,
"hwloc:base:clear_usage: NULL topology"));
return;
}
root = hwloc_get_root_obj(topo);
/* must not start at root as the root object has
* a different userdata attached to it
*/
for (k=0; k < root->arity; k++) {
df_clear(topo, root->children[k]);
}
}
/* The current slot_list notation only goes to the core level - i.e., the location
* is specified as socket:core. Thus, the code below assumes that all locations
* are to be parsed under that notation.
*/
static int socket_to_cpu_set(char *cpus,
hwloc_topology_t topo,
hwloc_bitmap_t cpumask)
{
char **range;
int range_cnt;
int lower_range, upper_range;
int socket_id;
hwloc_obj_t obj;
hwloc_bitmap_t avail, res;
if ('*' == cpus[0]) {
/* requesting cpumask for ALL sockets */
obj = hwloc_get_root_obj(topo);
/* set to all available logical processors - essentially,
* this specification equates to unbound
*/
res = opal_hwloc_base_get_available_cpus(topo, obj);
hwloc_bitmap_copy(cpumask, res);
return OPAL_SUCCESS;
}
range = opal_argv_split(cpus,'-');
range_cnt = opal_argv_count(range);
switch (range_cnt) {
case 1: /* no range was present, so just one socket given */
socket_id = atoi(range[0]);
obj = opal_hwloc_base_get_obj_by_type(topo, HWLOC_OBJ_SOCKET, 0, socket_id, OPAL_HWLOC_LOGICAL);
/* get the available logical cpus for this socket */
res = opal_hwloc_base_get_available_cpus(topo, obj);
hwloc_bitmap_copy(cpumask, res);
break;
case 2: /* range of sockets was given */
lower_range = atoi(range[0]);
upper_range = atoi(range[1]);
/* zero the bitmask */
hwloc_bitmap_zero(cpumask);
avail = hwloc_bitmap_alloc();
/* cycle across the range of sockets */
for (socket_id=lower_range; socket_id<=upper_range; socket_id++) {
obj = opal_hwloc_base_get_obj_by_type(topo, HWLOC_OBJ_SOCKET, 0, socket_id, OPAL_HWLOC_LOGICAL);
/* get the available logical cpus for this socket */
res = opal_hwloc_base_get_available_cpus(topo, obj);
/* set the corresponding bits in the bitmask */
hwloc_bitmap_or(avail, cpumask, res);
hwloc_bitmap_copy(cpumask, avail);
}
hwloc_bitmap_free(avail);
break;
default:
opal_argv_free(range);
return OPAL_ERROR;
}
opal_argv_free(range);
return OPAL_SUCCESS;
}
static int socket_core_to_cpu_set(char *socket_core_list,
hwloc_topology_t topo,
hwloc_bitmap_t cpumask)
{
int rc=OPAL_SUCCESS, i;
char **socket_core, *corestr;
char **range;
int range_cnt;
int lower_range, upper_range;
int socket_id, core_id;
hwloc_obj_t socket, core;
hwloc_cpuset_t res, avail;
unsigned int idx;
hwloc_obj_type_t obj_type = HWLOC_OBJ_CORE;
socket_core = opal_argv_split(socket_core_list, ':');
socket_id = atoi(socket_core[0]);
/* get the object for this socket id */
if (NULL == (socket = opal_hwloc_base_get_obj_by_type(topo, HWLOC_OBJ_SOCKET, 0,
socket_id, OPAL_HWLOC_LOGICAL))) {
opal_argv_free(socket_core);
return OPAL_ERR_NOT_FOUND;
}
/* as described in comment near top of file, hwloc isn't able
* to find cores on all platforms. Adjust the type here if
* required
*/
if (NULL == hwloc_get_obj_by_type(topo, HWLOC_OBJ_CORE, 0)) {
obj_type = HWLOC_OBJ_PU;
}
for (i=0; NULL != socket_core[i]; i++) {
if ('C' == socket_core[i][0] ||
'c' == socket_core[i][0]) {
corestr = &socket_core[i][1];
} else {
corestr = socket_core[i];
}
if ('*' == corestr[0]) {
/* set to all available logical cpus on this socket */
res = opal_hwloc_base_get_available_cpus(topo, socket);
hwloc_bitmap_copy(cpumask, res);
/* we are done - already assigned all cores! */
rc = OPAL_SUCCESS;
break;
} else {
range = opal_argv_split(corestr, '-');
range_cnt = opal_argv_count(range);
/* see if a range was set or not */
switch (range_cnt) {
case 1: /* only one core specified */
core_id = atoi(range[0]);
/* get that object */
idx = 0;
if (NULL == (core = df_search(topo, socket, obj_type, 0,
core_id, OPAL_HWLOC_AVAILABLE,
&idx, NULL))) {
return OPAL_ERR_NOT_FOUND;
}
/* get the cpus */
res = opal_hwloc_base_get_available_cpus(topo, core);
hwloc_bitmap_copy(cpumask, res);
break;
case 2: /* range of core id's was given */
lower_range = atoi(range[0]);
upper_range = atoi(range[1]);
hwloc_bitmap_zero(cpumask);
avail = hwloc_bitmap_alloc();
for (core_id=lower_range; core_id <= upper_range; core_id++) {
/* get that object */
idx = 0;
if (NULL == (core = df_search(topo, socket, obj_type, 0,
core_id, OPAL_HWLOC_AVAILABLE,
&idx, NULL))) {
return OPAL_ERR_NOT_FOUND;
}
/* get the cpus */
res = opal_hwloc_base_get_available_cpus(topo, core);
/* add them into the result */
hwloc_bitmap_or(avail, cpumask, res);
hwloc_bitmap_copy(cpumask, avail);
}
hwloc_bitmap_free(avail);
break;
default:
opal_argv_free(range);
opal_argv_free(socket_core);
return OPAL_ERROR;
}
opal_argv_free(range);
}
}
opal_argv_free(socket_core);
return rc;
}
int opal_hwloc_base_slot_list_parse(const char *slot_str,
hwloc_topology_t topo,
hwloc_cpuset_t cpumask)
{
char **item;
int rc, i;
hwloc_obj_t pu;
hwloc_cpuset_t pucpus;
char **range;
size_t range_cnt;
int core_id, lower_range, upper_range;
/* bozo checks */
if (NULL == opal_hwloc_topology) {
return OPAL_ERR_NOT_SUPPORTED;
}
if (NULL == slot_str || 0 == strlen(slot_str)) {
return OPAL_ERR_BAD_PARAM;
}
opal_output_verbose(5, opal_hwloc_base_output,
"slot assignment: slot_list == %s",
slot_str);
/* split at ';' */
item = opal_argv_split (slot_str, ';');
/* start with a clean mask */
hwloc_bitmap_zero(cpumask);
/* loop across the items and accumulate the mask */
for (i=0; NULL != item[i]; i++) {
/* if they specified "socket" by starting with an S/s,
* or if they use socket:core notation, then parse the
* socket/core info
*/
if ('S' == item[i][0] ||
's' == item[i][0] ||
NULL != strchr(item[i], ':')) {
/* specified a socket */
if (NULL == strchr(item[i], ':')) {
/* binding just to the socket level, though
* it could specify multiple sockets
*/
if (OPAL_SUCCESS != (rc = socket_to_cpu_set(&item[i][1], /* skip the 'S' */
topo, cpumask))) {
opal_argv_free(item);
return rc;
}
} else {
/* binding to a socket/whatever specification */
if ('S' == item[i][0] ||
's' == item[i][0]) {
if (OPAL_SUCCESS != (rc = socket_core_to_cpu_set(&item[i][1], /* skip the 'S' */
topo, cpumask))) {
opal_argv_free(item);
return rc;
}
} else {
if (OPAL_SUCCESS != (rc = socket_core_to_cpu_set(item[i],
topo, cpumask))) {
opal_argv_free(item);
return rc;
}
}
}
} else {
/* just a core specification - see if one or a range was given */
range = opal_argv_split(item[i], '-');
range_cnt = opal_argv_count(range);
hwloc_bitmap_zero(cpumask);
/* see if a range was set or not */
switch (range_cnt) {
case 1: /* only one core specified */
core_id = atoi(range[0]);
/* find the specified logical available cpu */
if (NULL == (pu = get_pu(topo, core_id))) {
opal_argv_free(range);
opal_argv_free(item);
return OPAL_ERROR;
}
/* get the available cpus for that object */
pucpus = opal_hwloc_base_get_available_cpus(topo, pu);
/* set that in the mask */
hwloc_bitmap_copy(cpumask, pucpus);
break;
case 2: /* range of core id's was given */
lower_range = atoi(range[0]);
upper_range = atoi(range[1]);
hwloc_bitmap_zero(cpumask);
for (core_id=lower_range; core_id <= upper_range; core_id++) {
/* find the specified logical available cpu */
if (NULL == (pu = get_pu(topo, core_id))) {
opal_argv_free(range);
opal_argv_free(item);
return OPAL_ERROR;
}
/* get the available cpus for that object */
pucpus = opal_hwloc_base_get_available_cpus(topo, pu);
/* set that in the mask */
hwloc_bitmap_or(cpumask, cpumask, pucpus);
}
break;
default:
opal_argv_free(range);
opal_argv_free(item);
return OPAL_ERROR;
}
}
}
opal_argv_free(item);
return OPAL_SUCCESS;
}
static opal_hwloc_locality_t get_locality(opal_hwloc_level_t level)
{
opal_hwloc_locality_t lvl = OPAL_PROC_LOCALITY_UNKNOWN;
switch(level) {
case OPAL_HWLOC_NODE_LEVEL:
lvl = OPAL_PROC_ON_NODE;
break;
case OPAL_HWLOC_NUMA_LEVEL:
lvl = OPAL_PROC_ON_NUMA;
break;
case OPAL_HWLOC_SOCKET_LEVEL:
lvl = OPAL_PROC_ON_SOCKET;
break;
case OPAL_HWLOC_L3CACHE_LEVEL:
lvl = OPAL_PROC_ON_L3CACHE;
break;
case OPAL_HWLOC_L2CACHE_LEVEL:
lvl = OPAL_PROC_ON_L2CACHE;
break;
case OPAL_HWLOC_L1CACHE_LEVEL:
lvl = OPAL_PROC_ON_L1CACHE;
break;
case OPAL_HWLOC_CORE_LEVEL:
lvl = OPAL_PROC_ON_CORE;
break;
case OPAL_HWLOC_HWTHREAD_LEVEL:
lvl = OPAL_PROC_ON_HWTHREAD;
break;
}
return lvl;
}
opal_hwloc_locality_t opal_hwloc_base_get_relative_locality(hwloc_topology_t topo,
opal_hwloc_level_t level1,
unsigned int peer1,
opal_hwloc_level_t level2,
unsigned int peer2)
{
opal_hwloc_locality_t locality;
hwloc_obj_t obj1, obj2;
unsigned cache_level=0;
opal_hwloc_level_t i, lvl;
/* start with what we know - they share a node on a cluster
* NOTE: we may alter that latter part as hwloc's ability to
* sense multi-cu, multi-cluster systems grows
*/
locality = OPAL_PROC_ON_CLUSTER | OPAL_PROC_ON_CU | OPAL_PROC_ON_NODE | OPAL_PROC_ON_BOARD;
/* TBD: handle procs bound at different levels - means they
* are from different jobs
*/
if (level1 != level2) {
return locality;
}
/* if the binding level is NODE, then there is nothing to do */
if (OPAL_HWLOC_NODE_LEVEL == level1) {
return locality;
}
lvl = level1;
/* we know that the objects are bound to the same level, so
* if the two objects are the index, then they share
* all levels down to and including their own
*/
if (peer1 == peer2) {
for (i=lvl; 0 < i; i--) {
opal_output_verbose(5, opal_hwloc_base_output,
"equal level - computing locality: %s",
opal_hwloc_base_print_level(i));
locality |= get_locality(i);
}
goto checkpu;
}
/* get cache level if required */
if (OPAL_HWLOC_L3CACHE_LEVEL == lvl) {
cache_level = 3;
} else if (OPAL_HWLOC_L2CACHE_LEVEL == lvl) {
cache_level = 2;
} else if (OPAL_HWLOC_L1CACHE_LEVEL == lvl) {
cache_level = 1;
}
/* get the objects for these peers */
opal_output_verbose(5, opal_hwloc_base_output,
"computing locality - getting object at level %s, index %u",
opal_hwloc_base_print_level(lvl), peer1);
obj1 = opal_hwloc_base_get_obj_by_type(topo, opal_hwloc_levels[lvl],
cache_level, peer1, OPAL_HWLOC_AVAILABLE);
opal_output_verbose(5, opal_hwloc_base_output,
"computing locality - getting object at level %s, index %u",
opal_hwloc_base_print_level(lvl), peer2);
obj2 = opal_hwloc_base_get_obj_by_type(topo, opal_hwloc_levels[lvl],
cache_level, peer2, OPAL_HWLOC_AVAILABLE);
/* climb the levels
* NOTE: for now, we will just assume that the two objects
* have a common topology above them - i.e., that each
* object has the same levels above them. In cases where
* nodes have heterogeneous sockets, this won't be true - but
* leave that problem for another day
*/
--lvl;
while (OPAL_HWLOC_NODE_LEVEL < lvl &&
NULL != obj1 && NULL != obj2 && obj1 != obj2) {
opal_output_verbose(5, opal_hwloc_base_output,
"computing locality - shifting up from %s",
opal_hwloc_base_print_level(lvl));
obj1 = obj1->parent;
obj2 = obj2->parent;
--lvl;
}
/* set the locality */
for (i=lvl; 0 < i; i--) {
opal_output_verbose(5, opal_hwloc_base_output,
"computing locality - filling level %s",
opal_hwloc_base_print_level(i));
locality |= get_locality(i);
}
checkpu:
/* NOTE: hwloc isn't able to find cores on all platforms. Example:
PPC64 running RHEL 5.4 (linux kernel 2.6.18) only reports NUMA
nodes and PU's. Fine.
However, note that hwloc_get_obj_by_type() will return NULL in
2 (effectively) different cases:
- no objects of the requested type were found
- the Nth object of the requested type was not found
So see if we can find *any* cores by looking for the 0th core.
*/
if (NULL == hwloc_get_obj_by_type(topo, HWLOC_OBJ_CORE, 0)) {
/* nope - so if the two peer's share a HWTHREAD, also
* declare them as sharing a core
*/
if (OPAL_PROC_ON_LOCAL_HWTHREAD(locality)) {
locality |= OPAL_PROC_ON_CORE;
}
}
opal_output_verbose(5, opal_hwloc_base_output,
"locality: %s",
opal_hwloc_base_print_locality(locality));
return locality;
}
static hwloc_obj_t df_search_level(hwloc_obj_t start,
hwloc_cpuset_t cpus,
opal_hwloc_level_t *bind_level)
{
unsigned k;
hwloc_obj_t obj;
hwloc_cpuset_t avail;
/* get the available cpus */
avail = opal_hwloc_base_get_available_cpus(opal_hwloc_topology, start);
if (NULL != avail && 0 == hwloc_bitmap_compare(avail, cpus)) {
/* convert the level */
if (HWLOC_OBJ_MACHINE == start->type) {
*bind_level = OPAL_HWLOC_NODE_LEVEL;
} else if (HWLOC_OBJ_NODE == start->type) {
*bind_level = OPAL_HWLOC_NUMA_LEVEL;
} else if (HWLOC_OBJ_SOCKET == start->type) {
*bind_level = OPAL_HWLOC_SOCKET_LEVEL;
} else if (HWLOC_OBJ_CACHE == start->type) {
if (3 == start->attr->cache.depth) {
*bind_level = OPAL_HWLOC_L3CACHE_LEVEL;
} else if (2 == start->attr->cache.depth) {
*bind_level = OPAL_HWLOC_L2CACHE_LEVEL;
} else {
*bind_level = OPAL_HWLOC_L1CACHE_LEVEL;
}
} else if (HWLOC_OBJ_CORE == start->type) {
*bind_level = OPAL_HWLOC_CORE_LEVEL;
} else if (HWLOC_OBJ_PU == start->type) {
*bind_level = OPAL_HWLOC_HWTHREAD_LEVEL;
} else {
/* We don't know what level it is, so just assign it to
"node" */
*bind_level = OPAL_HWLOC_NODE_LEVEL;
}
return start;
}
/* continue the search */
for (k=0; k < start->arity; k++) {
obj = df_search_level(start->children[k], cpus, bind_level);
if (NULL != obj) {
return obj;
}
}
return NULL;
}
hwloc_obj_t opal_hwloc_base_get_level_and_index(hwloc_cpuset_t cpus,
opal_hwloc_level_t *bind_level,
unsigned int *bind_idx)
{
hwloc_obj_t root, obj;
/* if we don't have topology info, nothing we can do */
if (NULL == opal_hwloc_topology) {
*bind_level = OPAL_HWLOC_NODE_LEVEL;
*bind_idx = 0;
return NULL;
}
/* start at the node level and do a down-first
* search until we find an exact match for the cpus
*/
*bind_level = OPAL_HWLOC_NODE_LEVEL;
*bind_idx = 0;
root = hwloc_get_root_obj(opal_hwloc_topology);
obj = df_search_level(root, cpus, bind_level);
if (NULL == obj) {
/* no match found */
return NULL;
}
/* get the index */
*bind_idx = opal_hwloc_base_get_obj_idx(opal_hwloc_topology, obj, OPAL_HWLOC_AVAILABLE);
return obj;
}
int opal_hwloc_base_get_local_index(hwloc_obj_type_t type,
unsigned cache_level,
unsigned int *idx)
{
opal_hwloc_level_t bind_level;
unsigned int bind_idx;
hwloc_obj_t obj;
/* if we don't have topology info, nothing we can do */
if (NULL == opal_hwloc_topology) {
return OPAL_ERR_NOT_AVAILABLE;
}
/* ensure we have our local cpuset */
opal_hwloc_base_get_local_cpuset();
/* if we are not bound, then this is meaningless */
obj = opal_hwloc_base_get_level_and_index(opal_hwloc_my_cpuset,
&bind_level, &bind_idx);
if (OPAL_HWLOC_NODE_LEVEL == bind_level) {
return OPAL_ERR_NOT_BOUND;
}
/* if the type/level match, then we are done */
if (type == opal_hwloc_levels[bind_level]) {
if (HWLOC_OBJ_CACHE == type) {
if ((cache_level == 1 && bind_level == OPAL_HWLOC_L1CACHE_LEVEL) ||
(cache_level == 2 && bind_level == OPAL_HWLOC_L2CACHE_LEVEL) ||
(cache_level == 3 && bind_level == OPAL_HWLOC_L3CACHE_LEVEL)) {
*idx = bind_idx;
return OPAL_SUCCESS;
}
} else {
*idx = bind_idx;
return OPAL_SUCCESS;
}
}
/* if the binding level is below the type, then we cannot
* answer the question as we could run on multiple objects
* of that type - e.g., if we are bound to NUMA and we are
* asked for the idx of the socket we are on, then we can
* only answer "unknown"
*/
if (type > opal_hwloc_levels[bind_level]) {
return OPAL_ERR_MULTIPLE_AFFINITIES;
}
if (type == HWLOC_OBJ_CACHE) {
if ((cache_level == 1 && OPAL_HWLOC_L1CACHE_LEVEL < bind_level) ||
(cache_level == 2 && OPAL_HWLOC_L2CACHE_LEVEL < bind_level) ||
(cache_level == 3 && OPAL_HWLOC_L3CACHE_LEVEL < bind_level)) {
return OPAL_ERR_MULTIPLE_AFFINITIES;
}
}
/* move upward until we find the specified type */
while (NULL != obj) {
obj = obj->parent;
if (obj->type == type) {
if (type == HWLOC_OBJ_CACHE) {
if (cache_level == obj->attr->cache.depth) {
break;
}
} else {
break;
}
}
}
if (NULL == obj) {
return OPAL_ERR_NOT_FOUND;
}
/* get the index of this object */
*idx = opal_hwloc_base_get_obj_idx(opal_hwloc_topology, obj, OPAL_HWLOC_AVAILABLE);
return OPAL_SUCCESS;
}
char* opal_hwloc_base_print_binding(opal_binding_policy_t binding)
{
char *ret, *bind;
opal_hwloc_print_buffers_t *ptr;
switch(OPAL_GET_BINDING_POLICY(binding)) {
case OPAL_BIND_TO_NONE:
bind = "NONE";
break;
case OPAL_BIND_TO_BOARD:
bind = "BOARD";
break;
case OPAL_BIND_TO_NUMA:
bind = "NUMA";
break;
case OPAL_BIND_TO_SOCKET:
bind = "SOCKET";
break;
case OPAL_BIND_TO_L3CACHE:
bind = "L3CACHE";
break;
case OPAL_BIND_TO_L2CACHE:
bind = "L2CACHE";
break;
case OPAL_BIND_TO_L1CACHE:
bind = "L1CACHE";
break;
case OPAL_BIND_TO_CORE:
bind = "CORE";
break;
case OPAL_BIND_TO_HWTHREAD:
bind = "HWTHREAD";
break;
case OPAL_BIND_TO_CPUSET:
bind = "CPUSET";
break;
default:
bind = "UNKNOWN";
}
ptr = opal_hwloc_get_print_buffer();
if (NULL == ptr) {
return opal_hwloc_print_null;
}
/* cycle around the ring */
if (OPAL_HWLOC_PRINT_NUM_BUFS == ptr->cntr) {
ptr->cntr = 0;
}
if (!OPAL_BINDING_REQUIRED(binding) &&
OPAL_BIND_OVERLOAD_ALLOWED(binding)) {
snprintf(ptr->buffers[ptr->cntr], OPAL_HWLOC_PRINT_MAX_SIZE,
"%s:IF-SUPPORTED:OVERLOAD-ALLOWED", bind);
} else if (OPAL_BIND_OVERLOAD_ALLOWED(binding)) {
snprintf(ptr->buffers[ptr->cntr], OPAL_HWLOC_PRINT_MAX_SIZE,
"%s:OVERLOAD-ALLOWED", bind);
} else if (!OPAL_BINDING_REQUIRED(binding)) {
snprintf(ptr->buffers[ptr->cntr], OPAL_HWLOC_PRINT_MAX_SIZE,
"%s:IF-SUPPORTED", bind);
} else {
snprintf(ptr->buffers[ptr->cntr], OPAL_HWLOC_PRINT_MAX_SIZE, "%s", bind);
}
ret = ptr->buffers[ptr->cntr];
ptr->cntr++;
return ret;
}
char* opal_hwloc_base_print_level(opal_hwloc_level_t level)
{
char *ret = "unknown";
switch(level) {
case OPAL_HWLOC_NODE_LEVEL:
ret = "NODE";
break;
case OPAL_HWLOC_NUMA_LEVEL:
ret = "NUMA";
break;
case OPAL_HWLOC_SOCKET_LEVEL:
ret = "SOCKET";
break;
case OPAL_HWLOC_L3CACHE_LEVEL:
ret = "L3CACHE";
break;
case OPAL_HWLOC_L2CACHE_LEVEL:
ret = "L2CACHE";
break;
case OPAL_HWLOC_L1CACHE_LEVEL:
ret = "L1CACHE";
break;
case OPAL_HWLOC_CORE_LEVEL:
ret = "CORE";
break;
case OPAL_HWLOC_HWTHREAD_LEVEL:
ret = "HWTHREAD";
break;
}
return ret;
}
/*
* Turn an int bitmap to a "a-b,c" range kind of string
*/
static char *bitmap2rangestr(int bitmap)
{
size_t i;
int range_start, range_end;
bool first, isset;
char tmp[BUFSIZ];
const int stmp = sizeof(tmp) - 1;
static char ret[BUFSIZ];
memset(ret, 0, sizeof(ret));
first = true;
range_start = -999;
for (i = 0; i < sizeof(int) * 8; ++i) {
isset = (bitmap & (1 << i));
/* Do we have a running range? */
if (range_start >= 0) {
if (isset) {
continue;
} else {
/* A range just ended; output it */
if (!first) {
strncat(ret, ",", sizeof(ret) - strlen(ret));
first = false;
}
range_end = i - 1;
if (range_start == range_end) {
snprintf(tmp, stmp, "%d", range_start);
} else {
snprintf(tmp, stmp, "%d-%d", range_start, range_end);
}
strncat(ret, tmp, sizeof(ret) - strlen(ret));
range_start = -999;
}
}
/* No running range */
else {
if (isset) {
range_start = i;
}
}
}
/* If we ended the bitmap with a range open, output it */
if (range_start >= 0) {
if (!first) {
strncat(ret, ",", sizeof(ret) - strlen(ret));
first = false;
}
range_end = i - 1;
if (range_start == range_end) {
snprintf(tmp, stmp, "%d", range_start);
} else {
snprintf(tmp, stmp, "%d-%d", range_start, range_end);
}
strncat(ret, tmp, sizeof(ret) - strlen(ret));
}
return ret;
}
/*
* Make a map of socket/core/hwthread tuples
*/
static int build_map(int *num_sockets_arg, int *num_cores_arg,
hwloc_cpuset_t cpuset, int ***map)
{
static int num_sockets = -1, num_cores = -1;
int socket_index, core_index, pu_index;
hwloc_obj_t socket, core, pu;
int **data;
/* Find out how many sockets we have (cached so that we don't have
to look this up every time) */
if (num_sockets < 0) {
num_sockets = hwloc_get_nbobjs_by_type(opal_hwloc_topology, HWLOC_OBJ_SOCKET);
/* Lazy: take the total number of cores that we have in the
topology; that'll be more than the max number of cores
under any given socket */
num_cores = hwloc_get_nbobjs_by_type(opal_hwloc_topology, HWLOC_OBJ_CORE);
}
*num_sockets_arg = num_sockets;
*num_cores_arg = num_cores;
/* Alloc a 2D array: sockets x cores. */
data = malloc(num_sockets * sizeof(int *));
if (NULL == data) {
return OPAL_ERR_OUT_OF_RESOURCE;
}
data[0] = calloc(num_sockets * num_cores, sizeof(int));
if (NULL == data[0]) {
free(data);
return OPAL_ERR_OUT_OF_RESOURCE;
}
for (socket_index = 1; socket_index < num_sockets; ++socket_index) {
data[socket_index] = data[socket_index - 1] + num_cores;
}
/* Iterate the PUs in this cpuset; fill in the data[][] array with
the socket/core/pu triples */
for (pu_index = 0,
pu = hwloc_get_obj_inside_cpuset_by_type(opal_hwloc_topology,
cpuset, HWLOC_OBJ_PU,
pu_index);
NULL != pu;
pu = hwloc_get_obj_inside_cpuset_by_type(opal_hwloc_topology,
cpuset, HWLOC_OBJ_PU,
++pu_index)) {
/* Go upward and find the core this PU belongs to */
core = pu;
while (NULL != core && core->type != HWLOC_OBJ_CORE) {
core = core->parent;
}
core_index = 0;
if (NULL != core) {
core_index = core->logical_index;
}
/* Go upward and find the socket this PU belongs to */
socket = pu;
while (NULL != socket && socket->type != HWLOC_OBJ_SOCKET) {
socket = socket->parent;
}
socket_index = 0;
if (NULL != socket) {
socket_index = socket->logical_index;
}
/* Save this socket/core/pu combo. LAZY: Assuming that we
won't have more PU's per core than (sizeof(int)*8). */
data[socket_index][core_index] |= (1 << pu->sibling_rank);
}
*map = data;
return OPAL_SUCCESS;
}
/*
* Make a prettyprint string for a hwloc_cpuset_t
*/
int opal_hwloc_base_cset2str(char *str, int len, hwloc_cpuset_t cpuset)
{
bool first;
int num_sockets, num_cores;
int ret, socket_index, core_index;
char tmp[BUFSIZ];
const int stmp = sizeof(tmp) - 1;
int **map;
str[0] = tmp[stmp] = '\0';
if (OPAL_SUCCESS != (ret = build_map(&num_sockets, &num_cores, cpuset, &map))) {
return ret;
}
/* Iterate over the data matrix and build up the string */
first = true;
for (socket_index = 0; socket_index < num_sockets; ++socket_index) {
for (core_index = 0; core_index < num_cores; ++core_index) {
if (map[socket_index][core_index] > 0) {
if (!first) {
strncat(str, ", ", len - strlen(str));
}
first = false;
snprintf(tmp, stmp, "socket %d[core %d[hwt %s]]",
socket_index, core_index,
bitmap2rangestr(map[socket_index][core_index]));
strncat(str, tmp, len - strlen(str));
}
}
}
free(map[0]);
free(map);
return OPAL_SUCCESS;
}
/*
* Make a prettyprint string for a cset in a map format.
* Example: [B./..]
* Key: [] - signifies socket
* / - divider between cores
* . - signifies PU a process not bound to
* B - signifies PU a process is bound to
*/
int opal_hwloc_base_cset2mapstr(char *str, int len, hwloc_cpuset_t cpuset)
{
char tmp[BUFSIZ];
int core_index, pu_index;
const int stmp = sizeof(tmp) - 1;
hwloc_obj_t socket, core, pu;
str[0] = tmp[stmp] = '\0';
/* Iterate over all existing sockets */
for (socket = hwloc_get_obj_by_type(opal_hwloc_topology,
HWLOC_OBJ_SOCKET, 0);
NULL != socket;
socket = socket->next_cousin) {
strncat(str, "[", len - strlen(str));
/* Iterate over all existing cores in this socket */
core_index = 0;
for (core = hwloc_get_obj_inside_cpuset_by_type(opal_hwloc_topology,
socket->cpuset,
HWLOC_OBJ_CORE, core_index);
NULL != core;
core = hwloc_get_obj_inside_cpuset_by_type(opal_hwloc_topology,
socket->cpuset,
HWLOC_OBJ_CORE, ++core_index)) {
if (core_index > 0) {
strncat(str, "/", len - strlen(str));
}
/* Iterate over all existing PUs in this core */
pu_index = 0;
for (pu = hwloc_get_obj_inside_cpuset_by_type(opal_hwloc_topology,
core->cpuset,
HWLOC_OBJ_PU, pu_index);
NULL != pu;
pu = hwloc_get_obj_inside_cpuset_by_type(opal_hwloc_topology,
core->cpuset,
HWLOC_OBJ_PU, ++pu_index)) {
/* Is this PU in the cpuset? */
if (hwloc_bitmap_isset(cpuset, pu->os_index)) {
strncat(str, "B", len - strlen(str));
} else {
strncat(str, ".", len - strlen(str));
}
}
}
strncat(str, "]", len - strlen(str));
}
return OPAL_SUCCESS;
}
Показать git blame Копировать постоянную ссылку