1
1
openmpi/test/util/opal_path_nfs.c
Jeff Squyres df82810d03 opal_path_nfs.c test: skip fuse filesystems
Linux statfs(2) lies about the type of fuse filesystems (it reports
fuse.encfs as an NFS filesystem).  So just skip fuse filesystems in
this test until/if we ever care to add some kind of workaround.

Refs trac:4767

cmr=v1.8.2:reviewer=rhc

This commit was SVN r32152.

The following Trac tickets were found above:
  Ticket 4767 --> https://svn.open-mpi.org/trac/ompi/ticket/4767
2014-07-08 13:30:49 +00:00

217 строки
6.1 KiB
C

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2005 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2010 Oak Ridge National Laboratory.
* All rights reserved.
* Copyright (c) 2010-2014 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2010 IBM Corporation. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "opal_config.h"
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <dirent.h>
#include "support.h"
#include "opal/util/path.h"
#include "opal/util/output.h"
/*
#define DEBUG
*/
/*
* On Linux, if this test is run with no command line params, it will
* run "mount" and analyze the output. It will slurp up all mount
* points and figure out if they are network mounts or not. Then it
* will send each of the mount points through opal_path_nfs() and
* compare the answer it gets to the answer it slurped from the output
* of "mount".
*
* On all platforms, if you provide one or more command line options,
* each command line option is given to opal_path_nfs() and the result
* is sent to stdout.
*/
#if !defined(__linux__)
int main(int argc, char* argv[])
{
if (argc > 1) {
int i;
printf("Interactive opal_path_nfs() test:\n");
for (i = 1; i < argc; i++) {
printf ("Is dir[%d]:%s one of the detected network file systems? %s\n",
i, argv[i], opal_path_nfs (argv[i]) ? "Yes": "No");
}
return 0;
}
printf("No filename was given; nothing to do\n");
return 77;
}
#else /* __linux__ */
static void test(char* file, bool expect);
static void get_mounts (int * num_dirs, char ** dirs[], bool ** nfs);
int main(int argc, char* argv[])
{
int num_dirs;
char ** dirs;
bool * nfs;
test_init("opal_path_nfs()");
#ifdef DEBUG
printf ("Test usage: ./opal_path_nfs [DIR]\n");
printf ("On Linux interprets output from mount(8) to check for nfs and verify opal_path_nfs()\n");
printf ("Additionally, you may specify multiple DIR on the cmd-line, of which you the output\n");
#endif
if (1 < argc) {
int i;
for (i = 1; i < argc; i++)
printf ("Is dir[%d]:%s one of the detected network file systems? %s\n",
i, argv[i], opal_path_nfs (argv[i]) ? "Yes": "No");
}
get_mounts (&num_dirs, &dirs, &nfs);
while (num_dirs--) {
test (dirs[num_dirs], nfs[num_dirs]);
}
/* All done */
return test_finalize();
}
void test(char* file, bool expect)
{
#ifdef DEBUG
printf ("test(): file:%s bool:%d\n",
file, expect);
#endif
if (expect == opal_path_nfs (file)) {
test_success();
} else {
char * msg;
asprintf(&msg, "Mismatch: input \"%s\", expected:%d got:%d\n",
file, expect, !expect);
test_failure(msg);
free(msg);
}
}
void get_mounts (int * num_dirs, char ** dirs[], bool * nfs[])
{
#define MAX_DIR 256
#define SIZE 1024
char * cmd = "mount | cut -f3,5 -d' ' > opal_path_nfs.out";
int rc;
int i;
FILE * file;
char ** dirs_tmp;
bool * nfs_tmp;
char buffer[SIZE];
rc = system (cmd);
if (-1 == rc) {
*num_dirs = 0;
**dirs = NULL;
*nfs = NULL;
}
dirs_tmp = (char**) malloc (MAX_DIR * sizeof(char**));
nfs_tmp = (bool*) malloc (MAX_DIR * sizeof(bool));
file = fopen("opal_path_nfs.out", "r");
i = 0;
rc = 4711;
while (NULL != fgets (buffer, SIZE, file)) {
int mount_known;
char fs[MAXNAMLEN];
dirs_tmp[i] = malloc (MAXNAMLEN);
if (2 != (rc = sscanf (buffer, "%s %s\n", dirs_tmp[i], fs))) {
goto out;
}
/*
* rpc_pipefs is a FS mounted on /var/lib/nfs/rpc_pipefs for NFS4
* Cannot distinguish it from NFS in opal_path_nfs, therefore just
* disregard it, as it is NOT an parallel filesystem...
*/
if (0 == strcasecmp (fs, "rpc_pipefs")) {
continue;
}
/* Per https://svn.open-mpi.org/trac/ompi/ticket/4767, Linux
lies about fuse filesystems. Skip them. */
if (0 == strncasecmp(fs, "fuse.", 5)) {
continue;
}
/* If we get an fs type of "none", skip it (e.g.,
http://www.open-mpi.org/community/lists/devel/2012/09/11493.php) */
if (0 == strcasecmp(fs, "none")) {
continue;
}
/*
* Later mounts override earlier mounts
* (e.g. nfs-mount of /, vs. initial rootfs-mount of /).
*/
for (mount_known = 0; mount_known < i; mount_known++) {
/* If we know this mount-point, then exit early */
if (0 == strcasecmp (dirs_tmp[mount_known], dirs_tmp[i])) {
#ifdef DEBUG
printf ("get_mounts: already know dir[%d]:%s\n",
mount_known, dirs_tmp[mount_known]);
#endif
break;
}
}
nfs_tmp[mount_known] = false;
if (0 == strcasecmp (fs, "nfs") ||
0 == strcasecmp (fs, "nfs4") ||
0 == strcasecmp (fs, "lustre") ||
0 == strcasecmp (fs, "panfs") ||
0 == strcasecmp (fs, "gpfs"))
nfs_tmp[mount_known] = true;
#ifdef DEBUG
printf ("get_mounts: dirs[%d]:%s fs:%s nfs:%s\n",
mount_known, dirs_tmp[mount_known],
fs, nfs_tmp[mount_known] ? "Yes" : "No");
#endif
if (mount_known >= i)
i++;
}
out:
*num_dirs = i;
*dirs = dirs_tmp;
*nfs = nfs_tmp;
}
#endif /* __linux__ */