ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
1c1b9d5480
openmpi/orte/mca/odls/process/odls_process_module.c
Ralph Castain 54b2cf747e These changes were mostly captured in a prior RFC (except for #2 below) and are aimed specifically at improving startup performance and setting up the remaining modifications described in that RFC. 
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.

This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:

As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.

In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.

The incoming changes revamp these procedures in three ways:

1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.

The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.

Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.


2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.

The size of this data has been reduced in three ways:

(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.

To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.

(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.

(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.

While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.


3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.

It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.

Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.


There are a few minor additional changes in the commit that I'll just note in passing:

* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.

* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.

* cleanup of some stale header files

This commit was SVN r16364.
2007-10-05 19:48:23 +00:00

1364 строки
53 KiB
C
Исполняемый файл
Исходник Ответственный История

/*
* Copyright (c) 2004-2007 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2007 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*
*/
#include "orte_config.h"
#include <stdlib.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif /* HAVE_UNISTD_H */
#include <errno.h>
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif /* HAVE_SYS_TYPES_H */
#include <sys/stat.h>
#ifdef HAVE_SYS_WAIT_H
#include <sys/wait.h>
#endif /* HAVE_SYS_WAIT_H */
#include <signal.h>
#ifdef HAVE_FCNTL_H
#include <fcntl.h>
#endif /* HAVE_FCNTL_H */
#include "opal/event/event.h"
#include "opal/util/argv.h"
#include "opal/util/output.h"
#include "opal/util/os_path.h"
#include "opal/util/show_help.h"
#include "opal/util/path.h"
#include "opal/util/basename.h"
#include "opal/util/opal_environ.h"
#include "opal/mca/base/mca_base_param.h"
#include "opal/util/num_procs.h"
#include "opal/util/sys_limits.h"
#include "orte/dss/dss.h"
#include "orte/util/sys_info.h"
#include "orte/util/univ_info.h"
#include "orte/util/session_dir.h"
#include "orte/runtime/orte_wait.h"
#include "orte/runtime/params.h"
#include "orte/mca/errmgr/errmgr.h"
#include "orte/mca/errmgr/base/base.h"
#include "orte/mca/iof/iof.h"
#include "orte/mca/iof/base/iof_base_setup.h"
#include "orte/mca/ns/ns.h"
#include "orte/mca/sds/base/base.h"
#include "orte/mca/rmgr/rmgr.h"
#include "orte/mca/rml/rml.h"
#include "orte/mca/gpr/gpr.h"
#include "orte/mca/rmaps/base/base.h"
#include "orte/mca/smr/smr.h"
#include "orte/mca/odls/base/odls_private.h"
#include "orte/mca/odls/process/odls_process.h"
static void set_handler_default(int sig);
static int orte_odls_process_get_add_procs_data(orte_gpr_notify_data_t **data,
orte_job_map_t *map)
{
orte_gpr_notify_data_t *ndat;
orte_gpr_value_t **values, *value;
orte_std_cntr_t cnt;
char *glob_tokens[] = {
ORTE_JOB_GLOBALS,
NULL
};
char *glob_keys[] = {
ORTE_JOB_APP_CONTEXT_KEY,
ORTE_JOB_VPID_START_KEY,
ORTE_JOB_VPID_RANGE_KEY,
ORTE_JOB_TOTAL_SLOTS_ALLOC_KEY,
NULL
};
opal_list_item_t *item, *m_item;
orte_mapped_node_t *node;
orte_mapped_proc_t *proc;
int rc;
char *segment;
/* set default answer */
*data = NULL;
ndat = OBJ_NEW(orte_gpr_notify_data_t);
if (NULL == ndat) {
ORTE_ERROR_LOG(ORTE_ERR_OUT_OF_RESOURCE);
return ORTE_ERR_OUT_OF_RESOURCE;
}
/* construct a fake trigger name so that the we can extract the jobid from it later */
if (ORTE_SUCCESS != (rc = orte_schema.get_std_trigger_name(&(ndat->target), "bogus", map->job))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
return rc;
}
/* get the segment name */
if (ORTE_SUCCESS != (rc = orte_schema.get_job_segment_name(&segment, map->job))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
return rc;
}
/* get the info from the job globals container first */
if (ORTE_SUCCESS != (rc = orte_gpr.get(ORTE_GPR_TOKENS_AND | ORTE_GPR_KEYS_OR,
segment, glob_tokens, glob_keys, &cnt, &values))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
return rc;
}
/* there can only be one value here since we only specified a single container.
* Just transfer the returned value to the ndat structure
*/
if (ORTE_SUCCESS != (rc = orte_pointer_array_add(&cnt, ndat->values, values[0]))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
OBJ_RELEASE(values[0]);
return rc;
}
ndat->cnt = 1;
/* the remainder of our required info is in the mapped_node objects, so all we
* have to do is transfer it over
*/
for (m_item = opal_list_get_first(&map->nodes);
m_item != opal_list_get_end(&map->nodes);
m_item = opal_list_get_next(m_item)) {
node = (orte_mapped_node_t*)m_item;
for (item = opal_list_get_first(&node->procs);
item != opal_list_get_end(&node->procs);
item = opal_list_get_next(item)) {
proc = (orte_mapped_proc_t*)item;
/* must not have any tokens so that launch_procs can process it correctly */
if (ORTE_SUCCESS != (rc = orte_gpr.create_value(&value, 0, segment, 3, 0))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
OBJ_RELEASE(value);
return rc;
}
if (ORTE_SUCCESS != (rc = orte_gpr.create_keyval(&(value->keyvals[0]),
ORTE_PROC_NAME_KEY,
ORTE_NAME, &proc->name))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
OBJ_RELEASE(value);
return rc;
}
if (ORTE_SUCCESS != (rc = orte_gpr.create_keyval(&(value->keyvals[1]),
ORTE_PROC_APP_CONTEXT_KEY,
ORTE_STD_CNTR, &proc->app_idx))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
OBJ_RELEASE(value);
return rc;
}
if (ORTE_SUCCESS != (rc = orte_gpr.create_keyval(&(value->keyvals[2]),
ORTE_NODE_NAME_KEY,
ORTE_STRING, node->nodename))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
OBJ_RELEASE(value);
return rc;
}
if (ORTE_SUCCESS != (rc = orte_gpr.create_keyval(&(value->keyvals[3]),
ORTE_PROC_LOCAL_RANK_KEY,
ORTE_VPID, &proc->local_rank))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
OBJ_RELEASE(value);
return rc;
}
if (ORTE_SUCCESS != (rc = orte_gpr.create_keyval(&(value->keyvals[4]),
ORTE_NODE_NUM_PROCS_KEY,
ORTE_STD_CNTR, &node->num_procs))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
OBJ_RELEASE(value);
return rc;
}
if (ORTE_SUCCESS != (rc = orte_pointer_array_add(&cnt, ndat->values, value))) {
ORTE_ERROR_LOG(rc);
OBJ_RELEASE(ndat);
OBJ_RELEASE(values[0]);
return rc;
}
ndat->cnt += 1;
}
}
*data = ndat;
return ORTE_SUCCESS;
}
static bool orte_odls_process_child_died( pid_t pid, unsigned int timeout,
int* exit_status )
{
int error;
HANDLE handle = OpenProcess( PROCESS_TERMINATE | SYNCHRONIZE, FALSE,
(DWORD)pid );
if( INVALID_HANDLE_VALUE == handle ) {
error = GetLastError();
/* Let's suppose that the process dissapear ... by now */
return true;
}
CloseHandle(handle);
/* The child didn't die, so return false */
return false;
}
static int orte_odls_process_kill_local( pid_t pid, int sig_num )
{
if( false == TerminateProcess( (HANDLE)pid, 1 ) ) {
return (int)GetLastError();
}
return 0;
}
static int orte_odls_process_kill_local_procs(orte_jobid_t job, bool set_state)
{
orte_odls_child_t *child;
opal_list_item_t *item, *next;
int rc, exit_status = -1;
opal_list_t procs_killed;
orte_namelist_t *proc;
OBJ_CONSTRUCT(&procs_killed, opal_list_t);
opal_output(orte_odls_globals.output, "%s odls_kill_local_proc: working on job %ld",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)job);
/* since we are going to be working with the global list of
* children, we need to protect that list from modification
* by other threads
*/
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
for (item = opal_list_get_first(&orte_odls_process.children);
item != opal_list_get_end(&orte_odls_process.children);
item = next) {
child = (orte_odls_child_t*)item;
/* preserve the pointer to the next item in list in case we release it */
next = opal_list_get_next(item);
opal_output(orte_odls_globals.output, "%s odls_kill_local_proc: checking child process %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), ORTE_NAME_PRINT(child->name));
/* do we have a child from the specified job? Because the
* job could be given as a WILDCARD value, we must use
* the dss.compare function to check for equality.
*/
if (ORTE_EQUAL != orte_dss.compare(&job, &(child->name->jobid), ORTE_JOBID)) {
continue;
}
/* remove the child from the list since it is either already dead or soon going to be dead */
opal_list_remove_item(&orte_odls_process.children, item);
/* is this process alive? if not, then nothing for us
* to do to it
*/
if (!child->alive) {
opal_output(orte_odls_globals.output, "%s odls_kill_local_proc: child %s is not alive",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), ORTE_NAME_PRINT(child->name));
/* ensure, though, that the state is terminated so we don't lockup if
* the proc never started
*/
goto MOVEON;
}
/* de-register the SIGCHILD callback for this pid */
if (ORTE_SUCCESS != (rc = orte_wait_cb_cancel(child->pid))) {
/* no need to error_log this - it just means that the pid is already gone */
goto MOVEON;
}
/* Send a sigterm to the process. */
if (0 != orte_odls_process_kill_local(child->pid, SIGTERM)) {
int err = GetLastError();
opal_show_help("help-odls-default.txt",
"odls-default:could-not-send-kill",
true, orte_system_info.nodename, child->pid, err);
goto MOVEON;
}
/* The kill succeeded. Wait up to timeout_before_sigkill
seconds to see if it died. */
if (!orte_odls_process_child_died(child->pid, orte_odls_globals.timeout_before_sigkill, &exit_status)) {
/* try killing it again */
orte_odls_process_kill_local(child->pid, SIGKILL);
/* Double check that it actually died this time */
if (!orte_odls_process_child_died(child->pid, orte_odls_globals.timeout_before_sigkill, &exit_status)) {
opal_show_help("help-odls-default.txt",
"odls-default:could-not-kill",
true, orte_system_info.nodename, child->pid);
}
}
MOVEON:
/* set the process to "not alive" */
child->alive = false;
/* add this proc to the local list */
proc = OBJ_NEW(orte_namelist_t);
if (ORTE_SUCCESS != (rc = orte_dss.copy((void**)&(proc->name), child->name, ORTE_NAME))) {
ORTE_ERROR_LOG(rc);
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
return rc;
}
opal_list_append(&procs_killed, &proc->item);
/* release the object since we killed it */
OBJ_RELEASE(child);
}
/* we are done with the global list, so we can now release
* any waiting threads - this also allows any callbacks to work
*/
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
/* deconstruct the local list and update the process states on the registry, if indicated */
while (NULL != (item = opal_list_remove_first(&procs_killed))) {
proc = (orte_namelist_t*)item;
if (set_state) {
if (ORTE_SUCCESS != (rc = orte_smr.set_proc_state(proc->name, ORTE_PROC_STATE_TERMINATED, exit_status))) {
ORTE_ERROR_LOG(rc);
/* don't exit out even if this didn't work - we still might need to kill more
* processes, so just keep trucking
*/
}
}
OBJ_RELEASE(proc);
}
OBJ_DESTRUCT(&procs_killed);
return ORTE_SUCCESS;
}
/*
* Wait for a callback indicating the child has completed.
*/
static void odls_process_wait_local_proc(pid_t pid, int status, void* cbdata)
{
orte_odls_child_t *child;
opal_list_item_t *item;
bool aborted;
char *job, *vpid, *abort_file;
struct _stat buf;
int rc;
opal_output(orte_odls_globals.output, "odls: child process terminated");
/* since we are going to be working with the global list of
* children, we need to protect that list from modification
* by other threads. This will also be used to protect us
* from race conditions on any abort situation
*/
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
/* find this child */
for (item = opal_list_get_first(&orte_odls_process.children);
item != opal_list_get_end(&orte_odls_process.children);
item = opal_list_get_next(item)) {
child = (orte_odls_child_t*)item;
if (child->alive && pid == child->pid) { /* found it */
goto GOTCHILD;
}
}
/* get here if we didn't find the child, or if the specified child is already
* dead. If the latter, then we have a problem as it means we are detecting
* it exiting multiple times
*/
opal_output(orte_odls_globals.output, "odls: did not find pid %ld in table!", (long) pid);
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
return;
GOTCHILD:
/* If this child was the (vpid==0), we hooked it up to orterun's
STDIN SOURCE earlier (do not change this without also changing
odsl_process_fork_local_proc()). So we have to tell the SOURCE
a) that we don't want any more data and b) that it should not
expect any more ACKs from this endpoint (so that the svc
component can still flush/shut down cleanly).
Note that the source may have already detected that this
process died as part of an OOB/RML exception, but that's ok --
its "exception" detection capabilities are not reliable, so we
*have* to do this unpublish here, even if it arrives after an
exception is detected and handled (in which case this unpublish
request will be ignored/discarded. */
opal_output(orte_odls_globals.output,
"odls: pid %ld corresponds to %s\n",
(long) pid, ORTE_NAME_PRINT(child->name));
#if 0
if (0 == child->name->vpid) {
rc = orte_iof.iof_unpublish(child->name, ORTE_NS_CMP_ALL,
ORTE_IOF_STDIN);
if (ORTE_SUCCESS != rc) {
ORTE_ERROR_LOG(rc);
/* We can't really abort, so keep going... */
}
}
opal_output(orte_odls_globals.output, "orted sent IOF unpub message!\n");
#endif
/* determine the state of this process */
aborted = false;
if(WIFEXITED(status)) {
/* even though the process exited "normally", it is quite
* possible that this happened via an orte_abort call - in
* which case, we need to indicate this was an "abnormal"
* termination. See the note in "orte_abort.c" for
* an explanation of this process.
*
* For our purposes here, we need to check for the existence
* of an "abort" file in this process' session directory. If
* we find it, then we know that this was an abnormal termination.
*/
if (ORTE_SUCCESS != (rc = orte_ns.convert_jobid_to_string(&job, child->name->jobid))) {
ORTE_ERROR_LOG(rc);
goto MOVEON;
}
if (ORTE_SUCCESS != (rc = orte_ns.convert_vpid_to_string(&vpid, child->name->vpid))) {
ORTE_ERROR_LOG(rc);
free(job);
goto MOVEON;
}
abort_file = opal_os_path(false, orte_process_info.universe_session_dir,
job, vpid, "abort", NULL );
free(job);
free(vpid);
if (0 == _stat(abort_file, &buf)) {
/* the abort file must exist - there is nothing in it we need. It's
* meer existence indicates that an abnormal termination occurred
*/
opal_output(orte_odls_globals.output, "odls: child %s died by abort",
ORTE_NAME_PRINT(child->name));
aborted = true;
free(abort_file);
} else {
opal_output(orte_odls_globals.output, "odls: child process %s terminated normally",
ORTE_NAME_PRINT(child->name));
}
} else {
/* the process was terminated with a signal! That's definitely
* abnormal, so indicate that condition
*/
opal_output(orte_odls_globals.output, "odls: child process %s terminated with signal",
ORTE_NAME_PRINT(child->name));
aborted = true;
}
MOVEON:
/* set this proc to "not alive" */
child->alive = false;
/* Clean up the session directory as if we were the process
* itself. This covers the case where the process died abnormally
* and didn't cleanup its own session directory.
*/
orte_session_dir_finalize(child->name);
/* set the proc state in the child structure */
if (aborted) {
child->state = ORTE_PROC_STATE_ABORTED;
} else {
child->state = ORTE_PROC_STATE_TERMINATED;
}
/* Need to unlock before we call set_proc_state as this is going to generate
* a trigger that will eventually callback to us
*/
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
if (ORTE_SUCCESS != (rc = orte_smr.set_proc_state(child->name, child->state, status))) {
ORTE_ERROR_LOG(rc);
}
}
/**
* Fork/exec the specified processes
*/
static int orte_odls_process_fork_local_proc(
orte_app_context_t* context,
orte_odls_child_t *child,
orte_vpid_t vpid_start,
orte_vpid_t vpid_range,
orte_std_cntr_t total_slots_alloc,
bool want_processor,
size_t processor,
bool oversubscribed)
{
pid_t pid;
orte_iof_base_io_conf_t opts;
int rc;
int i = 0;
char** environ_copy;
char *param, *param2;
char *uri;
/* check the system limits - if we are at our max allowed children, then
* we won't be allowed to do this anyway, so we may as well abort now.
* According to the documentation, num_procs = 0 is equivalent to
* to no limit, so treat it as unlimited here.
*/
if (opal_sys_limits.initialized) {
if (0 < opal_sys_limits.num_procs &&
opal_sys_limits.num_procs <= (int)opal_list_get_size(&orte_odls_process.children)) {
/* at the system limit - abort */
ORTE_ERROR_LOG(ORTE_ERR_SYS_LIMITS_CHILDREN);
child->state = ORTE_PROC_STATE_FAILED_TO_START;
child->exit_code = ORTE_ERR_SYS_LIMITS_CHILDREN;
return ORTE_ERR_SYS_LIMITS_CHILDREN;
}
}
/* should pull this information from MPIRUN instead of going with
default */
opts.usepty = OMPI_ENABLE_PTY_SUPPORT;
/* BWB - Fix post beta. Should setup stdin in orterun and make
part of the app_context. Do not change this without also
changing the reverse of this in
odls_default_wait_local_proc(). */
if( 0 == child->name->vpid ) {
opts.connect_stdin = true;
} else {
opts.connect_stdin = false;
}
if (ORTE_SUCCESS != (rc = orte_iof_base_setup_prefork(&opts))) {
ORTE_ERROR_LOG(rc);
child->state = ORTE_PROC_STATE_FAILED_TO_START;
child->exit_code = rc;
return rc;
}
/* Try to change to the context cwd and check that the app
exists and is executable. The RMGR functions will print
out a pretty error message if either of these operations fails
*/
if (ORTE_SUCCESS != (i = orte_rmgr.check_context_cwd(context, true))) {
return ORTE_ERR_FATAL;
}
if (ORTE_SUCCESS != (i = orte_rmgr.check_context_app(context))) {
return ORTE_ERR_FATAL;
}
/* setup base environment: copy the current environ and merge
in the app context environ */
if (NULL != context->env) {
environ_copy = opal_environ_merge(orte_launch_environ, context->env);
} else {
environ_copy = opal_argv_copy(orte_launch_environ);
}
/* special case handling for --prefix: this is somewhat icky,
but at least some users do this. :-\ It is possible that
when using --prefix, the user will also "-x PATH" and/or
"-x LD_LIBRARY_PATH", which would therefore clobber the
work that was done in the prior odls to ensure that we have
the prefix at the beginning of the PATH and
LD_LIBRARY_PATH. So examine the context->env and see if we
find PATH or LD_LIBRARY_PATH. If found, that means the
prior work was clobbered, and we need to re-prefix those
variables. */
for (i = 0; NULL != context->env && NULL != context->env[i]; ++i) {
char *newenv;
/* Reset PATH */
if (0 == strncmp("PATH=", context->env[i], 5)) {
asprintf(&newenv, "%s\\bin;%s",
context->prefix_dir, context->env[i] + 5);
opal_setenv("PATH", newenv, true, &environ_copy);
free(newenv);
}
/* Reset LD_LIBRARY_PATH */
else if (0 == strncmp("LD_LIBRARY_PATH=", context->env[i], 16)) {
asprintf(&newenv, "%s/lib:%s",
context->prefix_dir, context->env[i] + 16);
opal_setenv("LD_LIBRARY_PATH", newenv, true, &environ_copy);
free(newenv);
}
}
param = mca_base_param_environ_variable("rmgr","bootproxy","jobid");
opal_unsetenv(param, &environ_copy);
free(param);
/* pass my contact info to the local proc so we can talk */
uri = orte_rml.get_contact_info();
param = mca_base_param_environ_variable("orte","local_daemon","uri");
opal_setenv(param, uri, true, &environ_copy);
free(param);
free(uri);
/* setup yield schedule and processor affinity
* We default here to always setting the affinity processor if we want
* it. The processor affinity system then determines
* if processor affinity is enabled/requested - if so, it then uses
* this value to select the process to which the proc is "assigned".
* Otherwise, the paffinity subsystem just ignores this value anyway
*/
if (oversubscribed) {
param = mca_base_param_environ_variable("mpi", NULL, "yield_when_idle");
opal_setenv(param, "1", false, &environ_copy);
} else {
param = mca_base_param_environ_variable("mpi", NULL, "yield_when_idle");
opal_setenv(param, "0", false, &environ_copy);
}
free(param);
if (want_processor) {
param = mca_base_param_environ_variable("mpi", NULL,
"paffinity_processor");
asprintf(&param2, "%lu", (unsigned long) processor);
opal_setenv(param, param2, true, &environ_copy);
free(param);
free(param2);
} else {
param = mca_base_param_environ_variable("mpi", NULL,
"paffinity_processor");
opal_unsetenv(param, &environ_copy);
free(param);
}
/* setup universe info */
if (NULL != orte_universe_info.name) {
param = mca_base_param_environ_variable("universe", NULL, NULL);
asprintf(&uri, "%s@%s:%s", orte_universe_info.uid,
orte_universe_info.host,
orte_universe_info.name);
opal_setenv(param, uri, true, &environ_copy);
free(param);
free(uri);
}
/* setup ns contact info */
if(NULL != orte_process_info.ns_replica_uri) {
uri = strdup(orte_process_info.ns_replica_uri);
} else {
uri = orte_rml.get_contact_info();
}
param = mca_base_param_environ_variable("ns","replica","uri");
opal_setenv(param, uri, true, &environ_copy);
free(param);
free(uri);
/* setup gpr contact info */
if(NULL != orte_process_info.gpr_replica_uri) {
uri = strdup(orte_process_info.gpr_replica_uri);
} else {
uri = orte_rml.get_contact_info();
}
param = mca_base_param_environ_variable("gpr","replica","uri");
opal_setenv(param, uri, true, &environ_copy);
free(param);
free(uri);
/* set the app_context number into the environment */
param = mca_base_param_environ_variable("orte","app","num");
asprintf(&param2, "%ld", (long)child->app_idx);
opal_setenv(param, param2, true, &environ_copy);
free(param);
free(param2);
/* set the universe size in the environment */
param = mca_base_param_environ_variable("orte","universe","size");
asprintf(&param2, "%ld", (long)total_slots_alloc);
opal_setenv(param, param2, true, &environ_copy);
free(param);
free(param2);
/* use same nodename as the starting daemon (us) */
param = mca_base_param_environ_variable("orte", "base", "nodename");
opal_setenv(param, orte_system_info.nodename, true, &environ_copy);
free(param);
/* push name into environment */
orte_ns_nds_env_put(child->name, vpid_start, vpid_range,
child->local_rank, child->num_procs,
&environ_copy);
if (context->argv == NULL) {
context->argv = (char**)malloc(sizeof(char*)*2);
context->argv[0] = strdup(context->app);
context->argv[1] = NULL;
}
#if 0
/* connect endpoints IOF */
rc = orte_iof_base_setup_parent(child->name, &opts);
if(ORTE_SUCCESS != rc) {
ORTE_ERROR_LOG(rc);
return rc;
}
#endif
/* Flush all standard handles (stdin, stdout & stderr). */
_flushall();
{
intptr_t handle = _spawnve( _P_NOWAIT, context->app, context->argv, environ_copy );
if( -1 == handle ) {
child->state = ORTE_PROC_STATE_FAILED_TO_START;
child->exit_code = ORTE_ERR_PIPE_READ_FAILURE;
opal_show_help("help-orted-launcher.txt", "orted-launcher:execv-error",
true, context->app, "TODO: some error");
orte_smr.set_proc_state(child->name, ORTE_PROC_STATE_ABORTED, -1);
return ORTE_ERROR;
}
pid = handle;
}
/* set the proc state to LAUNCHED and save the pid */
child->state = ORTE_PROC_STATE_LAUNCHED;
child->pid = pid;
child->alive = true;
return ORTE_SUCCESS;
}
/**
* Launch all processes allocated to the current node.
*/
static int orte_odls_process_launch_local_procs(orte_gpr_notify_data_t *data)
{
int rc;
orte_std_cntr_t i, j, kv, kv2, *sptr, total_slots_alloc;
orte_gpr_value_t *value, **values;
orte_gpr_keyval_t *kval;
orte_app_context_t *app;
orte_jobid_t job;
orte_vpid_t *vptr, start, range;
char *node_name;
opal_list_t app_context_list;
orte_odls_child_t *child;
odls_process_app_context_t *app_item;
size_t num_processors;
bool oversubscribed=false, want_processor, *bptr, override_oversubscribed=false;
opal_list_item_t *item, *item2;
bool quit_flag;
bool node_included;
char *job_str, *uri_file, *my_uri, *session_dir=NULL;
FILE *fp;
/* parse the returned data to create the required structures
* for a fork launch. Since the data will contain information
* on procs for ALL nodes, we first have to find the value
* struct that contains info for our node.
*/
/* first, retrieve the job number we are to launch from the
* returned data - we can extract the jobid directly from the
* subscription name we created
*/
if (ORTE_SUCCESS != (rc = orte_schema.extract_jobid_from_std_trigger_name(&job, data->target))) {
ORTE_ERROR_LOG(rc);
return rc;
}
opal_output(orte_odls_globals.output, "odls: setting up launch for job %ld", (long)job);
/* We need to create a list of the app_contexts
* so we can know what to launch - the process info only gives
* us an index into the app_context array, not the app_context
* info itself.
*/
OBJ_CONSTRUCT(&app_context_list, opal_list_t);
/* set the default values to INVALID */
start = ORTE_VPID_INVALID;
range = ORTE_VPID_INVALID;
/* set the flag indicating this node is not included in the launch data */
node_included = false;
values = (orte_gpr_value_t**)(data->values)->addr;
for (j=0, i=0; i < data->cnt && j < (data->values)->size; j++) { /* loop through all returned values */
if (NULL != values[j]) {
i++;
value = values[j];
if (NULL != value->tokens) {
/* this came from the globals container, so it must contain
* the app_context(s), vpid_start, and vpid_range entries. Only one
* value object should ever come from that container
*/
for (kv=0; kv < value->cnt; kv++) {
kval = value->keyvals[kv];
if (strcmp(kval->key, ORTE_JOB_VPID_START_KEY) == 0) {
/* this can only occur once, so just store it */
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&vptr, kval->value, ORTE_VPID))) {
ORTE_ERROR_LOG(rc);
return rc;
}
start = *vptr;
continue;
}
if (strcmp(kval->key, ORTE_JOB_VPID_RANGE_KEY) == 0) {
/* this can only occur once, so just store it */
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&vptr, kval->value, ORTE_VPID))) {
ORTE_ERROR_LOG(rc);
return rc;
}
range = *vptr;
continue;
}
if (strcmp(kval->key, ORTE_JOB_APP_CONTEXT_KEY) == 0) {
/* this can occur multiple times since we allow multiple
* app_contexts on the orterun command line. Add them
* to the list
*/
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&app, kval->value, ORTE_APP_CONTEXT))) {
ORTE_ERROR_LOG(rc);
return rc;
}
app_item = OBJ_NEW(odls_process_app_context_t);
if (NULL == app_item) {
ORTE_ERROR_LOG(ORTE_ERR_OUT_OF_RESOURCE);
return ORTE_ERR_OUT_OF_RESOURCE;
}
app_item->app_context = app;
opal_list_append(&app_context_list, &app_item->super);
kval->value->data = NULL; /* protect the data storage from later release */
}
if (strcmp(kval->key, ORTE_JOB_OVERSUBSCRIBE_OVERRIDE_KEY) == 0) {
/* this can only occur once, so just store it */
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&bptr, kval->value, ORTE_BOOL))) {
ORTE_ERROR_LOG(rc);
return rc;
}
override_oversubscribed = *bptr;
continue;
}
if (strcmp(kval->key, ORTE_JOB_TOTAL_SLOTS_ALLOC_KEY) == 0) {
/* this can only occur once, so just store it */
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&sptr, kval->value, ORTE_STD_CNTR))) {
ORTE_ERROR_LOG(rc);
return rc;
}
total_slots_alloc = *sptr;
continue;
}
} /* end for loop to process global data */
} else {
/* this must have come from one of the process containers, so it must
* contain data for a proc structure - see if it
* belongs to this node
*/
for (kv=0; kv < value->cnt; kv++) {
kval = value->keyvals[kv];
if (strcmp(kval->key, ORTE_NODE_NAME_KEY) == 0) {
/* Most C-compilers will bark if we try to directly compare the string in the
* kval data area against a regular string, so we need to "get" the data
* so we can access it */
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&node_name, kval->value, ORTE_STRING))) {
ORTE_ERROR_LOG(rc);
return rc;
}
/* if this is our node...must also protect against a zero-length string */
if (NULL != node_name && 0 == strcmp(node_name, orte_system_info.nodename)) {
/* indicate that there is something for us to do */
node_included = true;
/* ...harvest the info into a new child structure */
child = OBJ_NEW(orte_odls_child_t);
for (kv2 = 0; kv2 < value->cnt; kv2++) {
kval = value->keyvals[kv2];
if(strcmp(kval->key, ORTE_PROC_NAME_KEY) == 0) {
/* copy the name into the child object */
if (ORTE_SUCCESS != (rc = orte_dss.copy((void**)&(child->name), kval->value->data, ORTE_NAME))) {
ORTE_ERROR_LOG(rc);
return rc;
}
continue;
}
if(strcmp(kval->key, ORTE_PROC_APP_CONTEXT_KEY) == 0) {
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&sptr, kval->value, ORTE_STD_CNTR))) {
ORTE_ERROR_LOG(rc);
return rc;
}
child->app_idx = *sptr; /* save the index into the app_context objects */
continue;
}
if(strcmp(kval->key, ORTE_PROC_LOCAL_RANK_KEY) == 0) {
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&vptr, kval->value, ORTE_VPID))) {
ORTE_ERROR_LOG(rc);
return rc;
}
child->local_rank = *vptr; /* save the local_rank */
continue;
}
if(strcmp(kval->key, ORTE_NODE_NUM_PROCS_KEY) == 0) {
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&sptr, kval->value, ORTE_STD_CNTR))) {
ORTE_ERROR_LOG(rc);
return rc;
}
child->num_procs = *sptr; /* save the number of procs from this job on this node */
continue;
}
if(strcmp(kval->key, ORTE_NODE_OVERSUBSCRIBED_KEY) == 0) {
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&bptr, kval->value, ORTE_BOOL))) {
ORTE_ERROR_LOG(rc);
return rc;
}
oversubscribed = *bptr;
continue;
}
} /* kv2 */
/* protect operation on the global list of children */
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
opal_list_append(&orte_odls_process.children, &child->super);
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
}
}
} /* for kv */
}
} /* for j */
}
/* if there is nothing for us to do, just return */
if (!node_included) {
return ORTE_SUCCESS;
}
/* record my uri in a file within the session directory so the local proc
* can contact me
*/
opal_output(orte_odls_globals.output, "odls: dropping local uri file");
/* put the file in the job session dir for the job being launched */
orte_ns.convert_jobid_to_string(&job_str, job);
if (ORTE_SUCCESS != (rc = orte_session_dir(true, NULL, NULL, NULL,
NULL, NULL, job_str, NULL))) {
ORTE_ERROR_LOG(rc);
return rc;
}
/* get the session dir name so we can put the file there */
if (ORTE_SUCCESS != (rc = orte_session_dir_get_name(&session_dir, NULL, NULL, NULL,
NULL, NULL, NULL, job_str, NULL))) {
ORTE_ERROR_LOG(rc);
free(job_str);
return rc;
}
free(job_str);
/* create the file and put my uri into it */
uri_file = opal_os_path(false, session_dir, "orted-uri.txt", NULL);
fp = fopen(uri_file, "w");
if (NULL == fp) {
ORTE_ERROR_LOG(ORTE_ERR_FILE_OPEN_FAILURE);
return ORTE_ERR_FILE_OPEN_FAILURE;
}
my_uri = orte_rml.get_contact_info();
fprintf(fp, "%s\n", my_uri);
fclose(fp);
free(uri_file);
free(my_uri);
/* Now we preload any files that are needed. This is done on a per
* app context basis */
for (item = opal_list_get_first(&app_context_list);
item != opal_list_get_end(&app_context_list);
item = opal_list_get_next(item)) {
app_item = (odls_process_app_context_t*)item;
if(app_item->app_context->preload_binary ||
NULL != app_item->app_context->preload_files) {
if( ORTE_SUCCESS != (rc = orte_odls_base_preload_files_app_context(app_item->app_context)) ) {
ORTE_ERROR_LOG(rc);
}
}
}
/* setup for processor affinity. If there are enough physical processors on this node, then
* we indicate which processor each process should be assigned to, IFF the user has requested
* processor affinity be used - the paffinity subsystem will make that final determination. All
* we do here is indicate that we should do the definitions just in case paffinity is active
*/
if (OPAL_SUCCESS != opal_get_num_processors( (int *) &num_processors)) {
/* if we cannot find the number of local processors, then default to conservative
* settings
*/
want_processor = false; /* default to not being a hog */
opal_output(orte_odls_globals.output,
"odls: could not get number of processors - using conservative settings");
} else {
opal_output(orte_odls_globals.output,
"odls: got %ld processors", (long)num_processors);
/* only do this if we can actually get info on the number of processors */
if (opal_list_get_size(&orte_odls_process.children) > (size_t)num_processors) {
want_processor = false;
} else {
want_processor = true;
}
/* now let's deal with the oversubscribed flag - and the use-case where a hostfile or some
* other non-guaranteed-accurate method was used to inform us about our allocation. Since
* the information on the number of slots on this node could have been incorrect, we need
* to check it against the local number of processors to ensure we don't overload them
*/
if (override_oversubscribed) {
opal_output(orte_odls_globals.output, "odls: overriding oversubscription");
if (opal_list_get_size(&orte_odls_process.children) > (size_t)num_processors) {
/* if the #procs > #processors, declare us oversubscribed regardless
* of what the mapper claimed - the user may have told us something
* incorrect
*/
oversubscribed = true;
} else {
/* likewise, if there are more processors here than we were told,
* declare us to not be oversubscribed so we can be aggressive. This
* covers the case where the user didn't tell us anything about the
* number of available slots, so we defaulted to a value of 1
*/
oversubscribed = false;
}
}
}
opal_output(orte_odls_globals.output, "odls: oversubscribed set to %s want_processor set to %s",
oversubscribed ? "true" : "false", want_processor ? "true" : "false");
/* okay, now let's launch our local procs using a fork/exec */
i = 0;
/* protect operations involving the global list of children */
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
quit_flag = false;
for( item = opal_list_get_first(&orte_odls_process.children);
((item != opal_list_get_end(&orte_odls_process.children)) && (false == quit_flag));
item = opal_list_get_next(item)) {
child = (orte_odls_child_t*)item;
/* is this child already alive? This can happen if
* we are asked to launch additional processes.
* If it has been launched, then do nothing
*/
if (child->alive) {
opal_output(orte_odls_globals.output, "odls: child %s is already alive",
ORTE_NAME_PRINT(child->name));
continue;
}
/* do we have a child from the specified job. Because the
* job could be given as a WILDCARD value, we must use
* the dss.compare function to check for equality.
*/
if (ORTE_EQUAL != orte_dss.compare(&job, &(child->name->jobid), ORTE_JOBID)) {
opal_output(orte_odls_globals.output, "odls: child %s is not in job %ld being launched",
ORTE_NAME_PRINT(child->name), (long)job);
continue;
}
opal_output(orte_odls_globals.output, "odls: preparing to launch child %s",
ORTE_NAME_PRINT(child->name));
/* find the indicated app_context in the list */
for (item2 = opal_list_get_first(&app_context_list);
item2 != opal_list_get_end(&app_context_list);
item2 = opal_list_get_next(item2)) {
app_item = (odls_process_app_context_t*)item2;
if (child->app_idx == app_item->app_context->idx) {
app = app_item->app_context;
goto DOFORK;
}
}
/* get here if we couldn't find the app_context */
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
return ORTE_ERR_NOT_FOUND;
DOFORK:
/* must unlock prior to fork to keep things clean in the
* event library
*/
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
if (ORTE_SUCCESS != (rc = orte_odls_process_fork_local_proc(app, child, start,
range, total_slots_alloc,
want_processor,
i, oversubscribed))) {
/* do NOT ERROR_LOG this error - it generates
* a message/node as most errors will be common
* across the entire cluster. Instead, we let orterun
* output a consolidated error message for us
*/
child->state = ORTE_PROC_STATE_FAILED_TO_START;
quit_flag = true;
}
/* reaquire lock so we don't double unlock... */
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
i++;
}
/* report the proc info and state in the registry */
if (ORTE_SUCCESS != (rc = orte_odls_base_report_spawn(&orte_odls_process.children))) {
ORTE_ERROR_LOG(rc);
return rc;
}
/* setup the waitpids on the children */
for (item = opal_list_get_first(&orte_odls_process.children);
item != opal_list_get_end(&orte_odls_process.children);
item = opal_list_get_next(item)) {
child = (orte_odls_child_t*)item;
if (ORTE_PROC_STATE_LAUNCHED == child->state) {
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
orte_wait_cb(child->pid, odls_process_wait_local_proc, NULL);
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
child->state = ORTE_PROC_STATE_RUNNING;
}
}
/* cleanup */
while (NULL != (item = opal_list_remove_first(&app_context_list))) {
OBJ_RELEASE(item);
}
OBJ_DESTRUCT(&app_context_list);
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
return ORTE_SUCCESS;
}
static int send_signal(pid_t pid, int signal)
{
return ORTE_ERROR;
}
static int orte_odls_process_signal_local_proc(const orte_process_name_t *proc, int32_t signal)
{
int rc;
opal_list_item_t *item;
orte_odls_child_t *child;
/* protect operations involving the global list of children */
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
/* if procs is NULL, then we want to signal all
* of the local procs, so just do that case
*/
if (NULL == proc) {
rc = ORTE_SUCCESS; /* pre-set this as an empty list causes us to drop to bottom */
for (item = opal_list_get_first(&orte_odls_process.children);
item != opal_list_get_end(&orte_odls_process.children);
item = opal_list_get_next(item)) {
child = (orte_odls_child_t*)item;
if (ORTE_SUCCESS != (rc = send_signal(child->pid, (int)signal))) {
ORTE_ERROR_LOG(rc);
}
}
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
return rc;
}
/* we want it sent to some specified process, so find it */
for (item = opal_list_get_first(&orte_odls_process.children);
item != opal_list_get_end(&orte_odls_process.children);
item = opal_list_get_next(item)) {
child = (orte_odls_child_t*)item;
if (ORTE_EQUAL == orte_dss.compare(&(child->name), (void*)proc, ORTE_NAME)) {
/* unlock before signaling as this may generate a callback */
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
if (ORTE_SUCCESS != (rc = send_signal(child->pid, (int)signal))) {
ORTE_ERROR_LOG(rc);
}
return rc;
}
}
/* only way to get here is if we couldn't find the specified proc.
* report that as an error and return it
*/
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
return ORTE_ERR_NOT_FOUND;
}
int orte_odls_process_deliver_message(orte_jobid_t job, orte_buffer_t *buffer, orte_rml_tag_t tag)
{
int rc;
opal_list_item_t *item;
orte_odls_child_t *child;
/* protect operations involving the global list of children */
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
for (item = opal_list_get_first(&orte_odls_process.children);
item != opal_list_get_end(&orte_odls_process.children);
item = opal_list_get_next(item)) {
child = (orte_odls_child_t*)item;
/* do we have a child from the specified job. Because the
* job could be given as a WILDCARD value, we must use
* the dss.compare function to check for equality.
*/
if (ORTE_EQUAL != orte_dss.compare(&job, &(child->name->jobid), ORTE_JOBID)) {
continue;
}
opal_output(orte_odls_globals.output, "odls: sending message to tag %lu on child %s",
(unsigned long)tag, ORTE_NAME_PRINT(child->name));
/* if so, send the message */
rc = orte_rml.send_buffer(child->name, buffer, tag, 0);
if (rc < 0) {
ORTE_ERROR_LOG(rc);
}
}
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
return ORTE_SUCCESS;
}
static int orte_odls_process_extract_proc_map_info(orte_process_name_t *daemon,
orte_process_name_t *proc,
orte_gpr_value_t *value)
{
int rc;
orte_vpid_t *vptr;
#if 0
/*** NOTE: YOU WILL NEED TO REVISE THIS TO REFLECT HOW YOU STORED
THE DATA IN YOUR GET_ADD_PROCS_DATA ROUTINE. YOU MAY WISH
TO REVISE THAT ROUTINE, AND YOUR LAUNCH ROUTINE WHERE YOU PARSE
THAT DATA, TO REFLECT CHANGES IN THE DEFAULT COMPONENT AS SOME
EFFICIENCIES AND FEATURES HAVE BEEN ADDED
****/
/* vpid of daemon that will host these procs is in first position */
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&vptr, value->keyvals[0]->value, ORTE_VPID))) {
ORTE_ERROR_LOG(rc);
return rc;
}
daemon->vpid = *vptr;
/* vpid of proc is in second position */
if (ORTE_SUCCESS != (rc = orte_dss.get((void**)&vptr, value->keyvals[1]->value, ORTE_VPID))) {
ORTE_ERROR_LOG(rc);
return rc;
}
proc->vpid = *vptr;
return ORTE_SUCCESS;
#endif
return ORTE_ERR_NOT_IMPLEMENTED;
}
static int orte_odls_process_require_sync(orte_process_name_t *proc)
{
orte_buffer_t buffer;
opal_list_item_t *item;
orte_odls_child_t *child;
int8_t dummy;
int rc;
bool found=false;
/* protect operations involving the global list of children */
OPAL_THREAD_LOCK(&orte_odls_process.mutex);
for (item = opal_list_get_first(&orte_odls_process.children);
item != opal_list_get_end(&orte_odls_process.children);
item = opal_list_get_next(item)) {
child = (orte_odls_child_t*)item;
/* find this child */
if (ORTE_EQUAL == orte_dss.compare(proc, child->name, ORTE_NAME)) {
opal_output(orte_odls_globals.output, "odls: registering sync on child %s",
ORTE_NAME_PRINT(child->name));
child->sync_required = !child->sync_required;
found = true;
break;
}
}
/* if it wasn't found on the list, then we need to add it - must have
* come from a singleton
*/
if (!found) {
child = OBJ_NEW(orte_odls_child_t);
if (ORTE_SUCCESS != (rc = orte_dss.copy((void**)&child->name, proc, ORTE_NAME))) {
ORTE_ERROR_LOG(rc);
return rc;
}
opal_list_append(&orte_odls_process.children, &child->super);
/* we don't know any other info about the child, so just indicate it's
* alive and set the sync
*/
child->alive = true;
child->sync_required = !child->sync_required;
}
/* ack the call */
OBJ_CONSTRUCT(&buffer, orte_buffer_t);
orte_dss.pack(&buffer, &dummy, 1, ORTE_INT8); /* put anything in */
opal_output(orte_odls_globals.output, "odls: sending sync ack to child %s",
ORTE_NAME_PRINT(proc));
if (0 > (rc = orte_rml.send_buffer(proc, &buffer, ORTE_RML_TAG_SYNC, 0))) {
ORTE_ERROR_LOG(rc);
OBJ_DESTRUCT(&buffer);
return rc;
}
OBJ_DESTRUCT(&buffer);
opal_condition_signal(&orte_odls_process.cond);
OPAL_THREAD_UNLOCK(&orte_odls_process.mutex);
return ORTE_SUCCESS;
}
orte_odls_base_module_1_3_0_t orte_odls_process_module = {
orte_odls_process_get_add_procs_data,
orte_odls_process_launch_local_procs,
orte_odls_process_kill_local_procs,
orte_odls_process_signal_local_proc,
orte_odls_process_deliver_message,
orte_odls_process_extract_proc_map_info,
orte_odls_process_require_sync
};
Показать git blame Копировать постоянную ссылку