ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
09b6758f8c
openmpi/orte/mca/oob/tcp/oob_tcp_msg.c
Josh Hursey 2c736873bb Fix a checkpoint/restart bug that causes a restarted application to occasionally throw a SIGSEGV or SIGPIPE due to invalid socket descriptors. 
The problem was caused by a bad ordering between the restart of the ORTE level tcp connections (in the OOB - out-of-band communication) and the Open MPI level tcp connections (BTLs). Before this commit ORTE would shutdown and restart the OOB completely before the OMPI level restarted its tcp connections. What would happen is that a socket descriptor used by the OMPI level on checkpoint was assigned to the ORTE level on restart. But the OMPI level had no knowledge that the socket descriptor it was previously using has been recycled so it closed it on restart. This caused the ORTE level to break as the newly created socket descriptor was closed without its knowledge.

The fix is to have the OMPI level shutdown tcp connections, allow the ORTE level to restart, and then allow the OMPi level to restart its connections. This seems obvious, and I'm surprised that this bug has not cropped up sooner. I'm confident that this specific problem has been fixed with this commit.

Thanks to Eric Roman and Tamer El Sayed for their help in identifying this problem, and patience while I was fixing it.

 * Add a new state {{{OPAL_CRS_RESTART_PRE}}}. This state identifies when we are on the down slope of the INC (finalize-like) which is useful when you want to close, but not reopen a component set for fear of interfering with a lower level.
 * Use this new state in OMPI level coordination. Here we want to make sure to play well with both the OMPI/BTL/TCP and ORTE/OOB/TCP components.
 * Update ft_event functions in PML and BML to handle the new restart state.
 * Add an additional flag to the error output in OOB/TCP so we can see what the socket descriptor was on failure as this can be helpful in debugging.

This commit was SVN r18276.
2008-04-24 17:54:22 +00:00

665 строки
25 KiB
C
Исходник Ответственный История

/*
* Copyright (c) 2004-2008 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2007 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2006-2007 Los Alamos National Security, LLC.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*
* In windows, many of the socket functions return an EWOULDBLOCK
* instead of \ things like EAGAIN, EINPROGRESS, etc. It has been
* verified that this will \ not conflict with other error codes that
* are returned by these functions \ under UNIX/Linux environments
*/
#include "orte_config.h"
#include "orte/constants.h"
#include "opal/opal_socket_errno.h"
#include "opal/class/opal_hash_table.h"
#include "orte/util/name_fns.h"
#include "orte/mca/errmgr/errmgr.h"
#include "orte/mca/routed/routed.h"
#include "orte/runtime/orte_globals.h"
#include "orte/mca/oob/tcp/oob_tcp.h"
#include "orte/mca/oob/tcp/oob_tcp_msg.h"
static void mca_oob_tcp_msg_construct(mca_oob_tcp_msg_t*);
static void mca_oob_tcp_msg_destruct(mca_oob_tcp_msg_t*);
static void mca_oob_tcp_msg_ident(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer);
static bool mca_oob_tcp_msg_recv(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer);
static void mca_oob_tcp_msg_data(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer);
static void mca_oob_tcp_msg_ping(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer);
OBJ_CLASS_INSTANCE(
mca_oob_tcp_msg_t,
opal_list_item_t,
mca_oob_tcp_msg_construct,
mca_oob_tcp_msg_destruct);
static void mca_oob_tcp_msg_construct(mca_oob_tcp_msg_t* msg)
{
OBJ_CONSTRUCT(&msg->msg_lock, opal_mutex_t);
OBJ_CONSTRUCT(&msg->msg_condition, opal_condition_t);
}
static void mca_oob_tcp_msg_destruct(mca_oob_tcp_msg_t* msg)
{
OBJ_DESTRUCT(&msg->msg_lock);
OBJ_DESTRUCT(&msg->msg_condition);
}
/*
* Wait for a msg to complete.
* @param msg (IN) Message to wait on.
* @param rc (OUT) Return code (number of bytes read on success or error code on failure).
* @retval ORTE_SUCCESS or error code on failure.
*/
int mca_oob_tcp_msg_wait(mca_oob_tcp_msg_t* msg, int* rc)
{
#if OMPI_ENABLE_PROGRESS_THREADS
OPAL_THREAD_LOCK(&msg->msg_lock);
while(msg->msg_complete == false) {
if(opal_event_progress_thread()) {
int rc;
OPAL_THREAD_UNLOCK(&msg->msg_lock);
rc = opal_event_loop(OPAL_EVLOOP_ONCE);
assert(rc >= 0);
OPAL_THREAD_LOCK(&msg->msg_lock);
} else {
opal_condition_wait(&msg->msg_condition, &msg->msg_lock);
}
}
OPAL_THREAD_UNLOCK(&msg->msg_lock);
#else
/* wait for message to complete */
while(msg->msg_complete == false) {
/* msg_wait() is used in the "barrier" at the completion of
MPI_FINALIZE, during which time BTLs may still need to
progress pending outgoing communication, so we need to
call opal_progress() here to make sure that communication
gets pushed out so others can enter finalize (and send us
the message we're here waiting for). However, if we're
in a callback from the event library that was triggered
from a call to opal_progress(), opal_progress() will
think another thread is already progressing the event
engine (in the case of mpi threads enabled) and not
progress the engine, meaning we'll never receive our
message. So we also need to progress the event library
expicitly. We use EVLOOP_NONBLOCK so that we can
progress both the registered callbacks and the event
library, as EVLOOP_ONCE may block for a short period of
time. */
opal_progress();
opal_event_loop(OPAL_EVLOOP_NONBLOCK);
OPAL_CR_TEST_CHECKPOINT_READY();
}
#endif
/* return status */
if(NULL != rc) {
*rc = msg->msg_rc;
}
return ORTE_SUCCESS;
}
/*
* Wait up to a timeout for the message to complete.
* @param msg (IN) Message to wait on.
* @param rc (OUT) Return code (number of bytes read on success or error code on failure).
* @retval ORTE_SUCCESS or error code on failure.
*/
int mca_oob_tcp_msg_timedwait(mca_oob_tcp_msg_t* msg, int* rc, struct timespec* abstime)
{
struct timeval tv;
uint32_t secs = abstime->tv_sec;
uint32_t usecs = abstime->tv_nsec * 1000;
gettimeofday(&tv,NULL);
#if OMPI_ENABLE_PROGRESS_THREADS
OPAL_THREAD_LOCK(&msg->msg_lock);
while(msg->msg_complete == false &&
((uint32_t)tv.tv_sec <= secs ||
((uint32_t)tv.tv_sec == secs && (uint32_t)tv.tv_usec < usecs))) {
if(opal_event_progress_thread()) {
int rc;
OPAL_THREAD_UNLOCK(&msg->msg_lock);
rc = opal_event_loop(OPAL_EVLOOP_ONCE);
assert(rc >= 0);
OPAL_THREAD_LOCK(&msg->msg_lock);
} else {
opal_condition_timedwait(&msg->msg_condition, &msg->msg_lock, abstime);
}
gettimeofday(&tv,NULL);
}
OPAL_THREAD_UNLOCK(&msg->msg_lock);
#else
/* wait for message to complete */
while(msg->msg_complete == false &&
((uint32_t)tv.tv_sec <= secs ||
((uint32_t)tv.tv_sec == secs && (uint32_t)tv.tv_usec < usecs))) {
/* see comment in tcp_msg_wait, above */
opal_progress();
opal_event_loop(OPAL_EVLOOP_NONBLOCK);
gettimeofday(&tv,NULL);
}
#endif
/* return status */
if(NULL != rc) {
*rc = msg->msg_rc;
}
if(msg->msg_rc < 0)
return msg->msg_rc;
return (msg->msg_complete ? ORTE_SUCCESS : ORTE_ERR_TIMEOUT);
}
/*
* Signal that a message has completed.
* @param msg (IN) Message to wait on.
* @param peer (IN) the peer of the message
* @retval ORTE_SUCCESS or error code on failure.
*/
int mca_oob_tcp_msg_complete(mca_oob_tcp_msg_t* msg, orte_process_name_t * peer)
{
OPAL_THREAD_LOCK(&msg->msg_lock);
msg->msg_complete = true;
if(NULL != msg->msg_cbfunc) {
OPAL_THREAD_UNLOCK(&msg->msg_lock);
#if defined(__WINDOWS__)
/**
* In order to be able to generate TCP events recursively, Windows need
* to get out of the callback attached to a specific socket. Therefore,
* as our OOB allow to block on a connection from a callback on the same
* connection, we have to trigger the completion callbacks outside of the
* OOB callbacks. We add them to the completed list here, and the progress
* engine will call our progress function later once all socket related
* events have been processed.
*/
OPAL_THREAD_LOCK(&mca_oob_tcp_component.tcp_lock);
opal_list_append(&mca_oob_tcp_component.tcp_msg_completed, (opal_list_item_t*)msg);
OPAL_THREAD_UNLOCK(&mca_oob_tcp_component.tcp_lock);
return ORTE_SUCCESS;
#else
/* post to a global list of completed messages */
if ((msg->msg_flags & ORTE_RML_FLAG_RECURSIVE_CALLBACK) == 0) {
int size;
OPAL_THREAD_LOCK(&mca_oob_tcp_component.tcp_lock);
opal_list_append(&mca_oob_tcp_component.tcp_msg_completed, (opal_list_item_t*)msg);
size = opal_list_get_size(&mca_oob_tcp_component.tcp_msg_completed);
OPAL_THREAD_UNLOCK(&mca_oob_tcp_component.tcp_lock);
if(size > 1) {
return ORTE_SUCCESS;
}
}
/* invoke message callback */
msg->msg_cbfunc(msg->msg_rc, peer, msg->msg_uiov, msg->msg_ucnt, msg->msg_hdr.msg_tag, msg->msg_cbdata);
/* dispatch any completed events */
if ((msg->msg_flags & ORTE_RML_FLAG_RECURSIVE_CALLBACK) == 0) {
opal_list_item_t* item;
OPAL_THREAD_LOCK(&mca_oob_tcp_component.tcp_lock);
opal_list_remove_item(&mca_oob_tcp_component.tcp_msg_completed, (opal_list_item_t*)msg);
MCA_OOB_TCP_MSG_RETURN(msg);
while(NULL !=
(item = opal_list_remove_first(&mca_oob_tcp_component.tcp_msg_completed))) {
msg = (mca_oob_tcp_msg_t*)item;
OPAL_THREAD_UNLOCK(&mca_oob_tcp_component.tcp_lock);
msg->msg_cbfunc(
msg->msg_rc,
&msg->msg_peer,
msg->msg_uiov,
msg->msg_ucnt,
msg->msg_hdr.msg_tag,
msg->msg_cbdata);
OPAL_THREAD_LOCK(&mca_oob_tcp_component.tcp_lock);
MCA_OOB_TCP_MSG_RETURN(msg);
}
OPAL_THREAD_UNLOCK(&mca_oob_tcp_component.tcp_lock);
} else {
MCA_OOB_TCP_MSG_RETURN(msg);
}
#endif /* defined(__WINDOWS__) */
} else {
opal_condition_broadcast(&msg->msg_condition);
OPAL_THREAD_UNLOCK(&msg->msg_lock);
}
return ORTE_SUCCESS;
}
/*
* The function that actually sends the data!
* @param msg a pointer to the message to send
* @param peer the peer we are sending to
* @retval true if the entire message has been sent
* @retval false if the entire message has not been sent
*/
bool mca_oob_tcp_msg_send_handler(mca_oob_tcp_msg_t* msg, struct mca_oob_tcp_peer_t * peer)
{
int rc;
while(1) {
rc = writev(peer->peer_sd, msg->msg_rwptr, msg->msg_rwnum);
if(rc < 0) {
if(opal_socket_errno == EINTR)
continue;
/* In windows, many of the socket functions return an EWOULDBLOCK instead of \
things like EAGAIN, EINPROGRESS, etc. It has been verified that this will \
not conflict with other error codes that are returned by these functions \
under UNIX/Linux environments */
else if (opal_socket_errno == EAGAIN || opal_socket_errno == EWOULDBLOCK)
return false;
else {
opal_output(0, "%s-%s mca_oob_tcp_msg_send_handler: writev failed: %s (%d) [sd = %d]",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&(peer->peer_name)),
strerror(opal_socket_errno),
opal_socket_errno,
peer->peer_sd);
mca_oob_tcp_peer_close(peer);
msg->msg_rc = ORTE_ERR_CONNECTION_FAILED;
return true;
}
}
msg->msg_rc += rc;
do {/* while there is still more iovecs to write */
if(rc < (int)msg->msg_rwptr->iov_len) {
msg->msg_rwptr->iov_len -= rc;
msg->msg_rwptr->iov_base = (ompi_iov_base_ptr_t)((char *) msg->msg_rwptr->iov_base + rc);
break;
} else {
rc -= msg->msg_rwptr->iov_len;
(msg->msg_rwnum)--;
(msg->msg_rwptr)++;
if(0 == msg->msg_rwnum) {
return true;
}
}
} while(1);
}
}
/*
* Receives message data.
* @param msg the message to be received into
* @param peer the peer to receive from
* @retval true if the whole message was received
* @retval false if the whole message was not received
*/
bool mca_oob_tcp_msg_recv_handler(mca_oob_tcp_msg_t* msg, struct mca_oob_tcp_peer_t * peer)
{
/* has entire header been received */
if(msg->msg_rwptr == msg->msg_rwiov) {
if(mca_oob_tcp_msg_recv(msg, peer) == false)
return false;
/* allocate a buffer for the receive */
MCA_OOB_TCP_HDR_NTOH(&msg->msg_hdr);
if(msg->msg_hdr.msg_size > 0) {
msg->msg_rwbuf = malloc(msg->msg_hdr.msg_size);
if(NULL == msg->msg_rwbuf) {
opal_output(0, "%s-%s mca_oob_tcp_msg_recv_handler: malloc(%d) failed\n",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&(peer->peer_name)),
msg->msg_hdr.msg_size);
mca_oob_tcp_peer_close(peer);
return false;
}
msg->msg_rwiov[1].iov_base = (ompi_iov_base_ptr_t)msg->msg_rwbuf;
msg->msg_rwiov[1].iov_len = msg->msg_hdr.msg_size;
msg->msg_rwnum = 1;
} else {
msg->msg_rwiov[1].iov_base = NULL;
msg->msg_rwiov[1].iov_len = 0;
msg->msg_rwnum = 0;
}
if (mca_oob_tcp_component.tcp_debug >= OOB_TCP_DEBUG_INFO) {
opal_output(0, "%s-%s (origin: %s) mca_oob_tcp_msg_recv_handler: size %lu\n",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&(peer->peer_name)),
ORTE_NAME_PRINT(&(msg->msg_hdr.msg_origin)),
(unsigned long)(msg->msg_hdr.msg_size) );
}
}
/* do the right thing based on the message type */
switch(msg->msg_hdr.msg_type) {
case MCA_OOB_TCP_IDENT:
/* done - there is nothing else to receive */
return true;
case MCA_OOB_TCP_PING:
/* done - there is nothing else to receive */
return true;
case MCA_OOB_TCP_DATA:
/* finish receiving message */
return mca_oob_tcp_msg_recv(msg, peer);
default:
return true;
}
}
/**
* Process the current iovec
*/
static bool mca_oob_tcp_msg_recv(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer)
{
int rc;
while(msg->msg_rwnum) {
rc = readv(peer->peer_sd, msg->msg_rwptr, msg->msg_rwnum);
if(rc < 0) {
if(opal_socket_errno == EINTR)
continue;
/* In windows, many of the socket functions return an EWOULDBLOCK instead of \
things like EAGAIN, EINPROGRESS, etc. It has been verified that this will \
not conflict with other error codes that are returned by these functions \
under UNIX/Linux environments */
else if (opal_socket_errno == EAGAIN || opal_socket_errno == EWOULDBLOCK)
return false;
opal_output(0, "%s-%s mca_oob_tcp_msg_recv: readv failed: %s (%d)",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&(peer->peer_name)),
strerror(opal_socket_errno),
opal_socket_errno);
mca_oob_tcp_peer_close(peer);
if (NULL != mca_oob_tcp.oob_exception_callback) {
mca_oob_tcp.oob_exception_callback(&peer->peer_name, ORTE_RML_PEER_DISCONNECTED);
}
return false;
} else if (rc == 0) {
if(mca_oob_tcp_component.tcp_debug >= OOB_TCP_DEBUG_CONNECT_FAIL) {
opal_output(0, "%s-%s mca_oob_tcp_msg_recv: peer closed connection",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&(peer->peer_name)));
}
mca_oob_tcp_peer_close(peer);
if (NULL != mca_oob_tcp.oob_exception_callback) {
mca_oob_tcp.oob_exception_callback(&peer->peer_name, ORTE_RML_PEER_DISCONNECTED);
}
return false;
}
do {
if(rc < (int)msg->msg_rwptr->iov_len) {
msg->msg_rwptr->iov_len -= rc;
msg->msg_rwptr->iov_base = (ompi_iov_base_ptr_t)((char *) msg->msg_rwptr->iov_base + rc);
break;
} else {
rc -= msg->msg_rwptr->iov_len;
(msg->msg_rwnum)--;
(msg->msg_rwptr)++;
if(0 == msg->msg_rwnum) {
assert( 0 == rc );
return true;
}
}
} while(1);
}
return true;
}
/**
* Process a completed message.
*/
void mca_oob_tcp_msg_recv_complete(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer)
{
switch(msg->msg_hdr.msg_type) {
case MCA_OOB_TCP_IDENT:
mca_oob_tcp_msg_ident(msg,peer);
break;
case MCA_OOB_TCP_PING:
mca_oob_tcp_msg_ping(msg,peer);
break;
case MCA_OOB_TCP_DATA:
mca_oob_tcp_msg_data(msg,peer);
break;
default:
opal_output(0, "%s mca_oob_tcp_msg_recv_complete: invalid message type: %d from peer %s\n",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), msg->msg_hdr.msg_type,
ORTE_NAME_PRINT(&peer->peer_name));
MCA_OOB_TCP_MSG_RETURN(msg);
break;
}
}
/**
* Process an ident message. In this case, we insist that the two process names
* exactly match - hence, we use the orte_ns.compare_fields function, which
* checks each field in a literal manner (i.e., no wildcards).
*/
static void mca_oob_tcp_msg_ident(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer)
{
orte_process_name_t src = msg->msg_hdr.msg_src;
OPAL_THREAD_LOCK(&mca_oob_tcp_component.tcp_lock);
if (orte_util_compare_name_fields(ORTE_NS_CMP_ALL, &peer->peer_name, &src) != OPAL_EQUAL) {
opal_hash_table_remove_value_uint64(&mca_oob_tcp_component.tcp_peers,
orte_util_hash_name(&peer->peer_name));
peer->peer_name = src;
opal_hash_table_set_value_uint64(&mca_oob_tcp_component.tcp_peers,
orte_util_hash_name(&peer->peer_name), peer);
}
OPAL_THREAD_UNLOCK(&mca_oob_tcp_component.tcp_lock);
}
/**
* Process a ping message.
*/
static void mca_oob_tcp_msg_ping(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer)
{
/* for now - we dont do anything - may want to send back a response at some poing */
}
/*
* Progress a completed recv:
* (1) signal a posted recv as complete
* (2) queue an unexpected message in the recv list
*/
static void mca_oob_tcp_msg_data(mca_oob_tcp_msg_t* msg, mca_oob_tcp_peer_t* peer)
{
/* attempt to match unexpected message to a posted recv */
mca_oob_tcp_msg_t* post;
int rc;
OPAL_THREAD_LOCK(&mca_oob_tcp_component.tcp_match_lock);
if (ORTE_JOB_FAMILY(msg->msg_hdr.msg_origin.jobid) !=
ORTE_JOB_FAMILY(ORTE_PROC_MY_NAME->jobid)) {
/* this message came from a different job family, so we may
* not know how to route any reply back to the originator. Update
* our route so we can dynamically build the routing table
*/
/* if the origin and the src are the same, then we don't need to do
* this - update_route was already called when the connection was
* established in oob_tcp_peer
*/
if (OPAL_EQUAL != orte_util_compare_name_fields(ORTE_NS_CMP_ALL,
&(msg->msg_hdr.msg_origin),
&(msg->msg_hdr.msg_src))) {
if (ORTE_SUCCESS != (rc = orte_routed.update_route(&(msg->msg_hdr.msg_origin),
&(msg->msg_hdr.msg_src)))) {
/* Nothing we can do about errors here as we definitely want
* the receive to complete, but at least bark loudly
*/
ORTE_ERROR_LOG(rc);
}
}
}
/* match msg against posted receives */
post = mca_oob_tcp_msg_match_post(&msg->msg_hdr.msg_origin, msg->msg_hdr.msg_tag);
if(NULL != post) {
if(NULL == post->msg_uiov || 0 == post->msg_ucnt) {
opal_output(0, "msg_data returning bad param");
post->msg_rc = ORTE_ERR_BAD_PARAM;
} else {
/* copy msg data into posted recv */
if (post->msg_flags & ORTE_RML_ALLOC) msg->msg_flags |= ORTE_RML_ALLOC;
post->msg_rc = mca_oob_tcp_msg_copy(msg, post->msg_uiov, post->msg_ucnt);
if(post->msg_flags & ORTE_RML_TRUNC) {
int i, size = 0;
for(i=1; i<msg->msg_rwcnt+1; i++)
size += msg->msg_rwiov[i].iov_len;
post->msg_rc = size;
}
}
if(post->msg_flags & ORTE_RML_PEEK) {
/* will need message for actual receive */
opal_list_append(&mca_oob_tcp_component.tcp_msg_recv, &msg->super.super);
} else {
MCA_OOB_TCP_MSG_RETURN(msg);
}
mca_oob_tcp_component.tcp_match_count++;
OPAL_THREAD_UNLOCK(&mca_oob_tcp_component.tcp_match_lock);
if(post->msg_flags & ORTE_RML_PERSISTENT) {
post->msg_cbfunc(
post->msg_rc,
&peer->peer_name,
post->msg_uiov,
post->msg_ucnt,
post->msg_hdr.msg_tag,
post->msg_cbdata);
} else {
mca_oob_tcp_msg_complete(post, &msg->msg_hdr.msg_origin);
}
OPAL_THREAD_LOCK(&mca_oob_tcp_component.tcp_match_lock);
if(--mca_oob_tcp_component.tcp_match_count == 0)
opal_condition_signal(&mca_oob_tcp_component.tcp_match_cond);
OPAL_THREAD_UNLOCK(&mca_oob_tcp_component.tcp_match_lock);
} else {
opal_list_append(&mca_oob_tcp_component.tcp_msg_recv, (opal_list_item_t*)msg);
OPAL_THREAD_UNLOCK(&mca_oob_tcp_component.tcp_match_lock);
}
}
/*
* Called to copy the results of a message into user supplied iovec array.
* @param msg (IN) Message send that is in progress.
* @param iov (IN) Iovec array of user supplied buffers.
* @retval count Number of elements in iovec array.
*/
int mca_oob_tcp_msg_copy(mca_oob_tcp_msg_t* msg, struct iovec* iov, int count)
{
int i, ret = 0;
unsigned char* src_ptr = (unsigned char*) msg->msg_rwbuf;
size_t src_len = msg->msg_hdr.msg_size;
for (i = 0 ; i < count ; i++) {
if ((msg->msg_flags & ORTE_RML_ALLOC) && (i == count - 1)) {
if (i == 0) {
iov[i].iov_base = (IOVBASE_TYPE *) src_ptr;
iov[i].iov_len = src_len;
msg->msg_rwbuf = NULL;
} else {
iov[i].iov_base = (IOVBASE_TYPE *) malloc(src_len);
iov[i].iov_len = src_len;
memcpy(iov[i].iov_base, src_ptr, src_len);
}
} else {
if (iov[i].iov_len > src_len) {
memcpy(iov[i].iov_base, src_ptr, src_len);
iov[i].iov_len = src_len;
} else {
memcpy(iov[i].iov_base, src_ptr, iov[i].iov_len);
}
}
ret += iov[i].iov_len;
src_len -= iov[i].iov_len;
src_ptr += iov[i].iov_len;
if (0 == src_len) break;
}
return ret;
}
/*
* Match name to a message that has been received asynchronously (unexpected).
*
* @param name (IN) Name associated with peer or wildcard to match first posted recv.
* @return msg Matched message or NULL.
*
* Note - this routine requires the caller to be holding the module lock.
*/
mca_oob_tcp_msg_t* mca_oob_tcp_msg_match_recv(orte_process_name_t* name, int tag)
{
mca_oob_tcp_msg_t* msg;
for(msg = (mca_oob_tcp_msg_t*) opal_list_get_first(&mca_oob_tcp_component.tcp_msg_recv);
msg != (mca_oob_tcp_msg_t*) opal_list_get_end(&mca_oob_tcp_component.tcp_msg_recv);
msg = (mca_oob_tcp_msg_t*) opal_list_get_next(msg)) {
if(OPAL_EQUAL == opal_dss.compare(name, &msg->msg_hdr.msg_origin, ORTE_NAME)) {
if (tag == msg->msg_hdr.msg_tag) {
return msg;
}
}
}
return NULL;
}
/*
* Match name to a posted recv request.
*
* @param name (IN) Name associated with peer or wildcard to match first posted recv.
* @return msg Matched message or NULL.
*
* Note - this routine requires the caller to be holding the module lock.
*/
mca_oob_tcp_msg_t* mca_oob_tcp_msg_match_post(orte_process_name_t* name, int tag)
{
mca_oob_tcp_msg_t* msg;
for(msg = (mca_oob_tcp_msg_t*) opal_list_get_first(&mca_oob_tcp_component.tcp_msg_post);
msg != (mca_oob_tcp_msg_t*) opal_list_get_end(&mca_oob_tcp_component.tcp_msg_post);
msg = (mca_oob_tcp_msg_t*) opal_list_get_next(msg)) {
if(OPAL_EQUAL == opal_dss.compare(name, &msg->msg_peer, ORTE_NAME)) {
if (msg->msg_hdr.msg_tag == tag) {
if((msg->msg_flags & ORTE_RML_PERSISTENT) == 0) {
opal_list_remove_item(&mca_oob_tcp_component.tcp_msg_post, &msg->super.super);
}
return msg;
}
}
}
return NULL;
}
Показать git blame Копировать постоянную ссылку