1
1
openmpi/opal/threads/mutex.h
Rainer Keller 32dcd9e551 - Adding #include <stdbool.h> with protection in r17488 and r17504
seemed to be the right thing(tm), but broke the Sun Studio C++
   compiler under Linux (ticket 747).

   This patch should allow inclusion into C and C++ from other header
   files without problems.

This commit was SVN r17792.

The following SVN revision numbers were found above:
  r17488 --> open-mpi/ompi@d53131f261
  r17504 --> open-mpi/ompi@b22e8e7567
2008-03-08 12:53:10 +00:00

421 строка
14 KiB
C

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
* University Research and Technology
* Corporation. All rights reserved.
* Copyright (c) 2004-2006 The University of Tennessee and The University
* of Tennessee Research Foundation. All rights
* reserved.
* Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
* University of Stuttgart. All rights reserved.
* Copyright (c) 2004-2005 The Regents of the University of California.
* All rights reserved.
* Copyright (c) 2007 Cisco, Inc. All rights reserved.
* Copyright (c) 2007 Los Alamos National Security, LLC. All rights
* reserved.
* Copyright (c) 2007 Voltaire. All rights reserved.
*
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#ifndef OPAL_MUTEX_H
#define OPAL_MUTEX_H 1
#include "opal_config.h"
/*
* Circumentvent problems in C++ compilers.
* For C++, we should not need the file, anyhow.
*/
#if defined(HAVE_STDBOOL_H) && !(defined(c_plusplus) || defined(__cplusplus))
#include <stdbool.h>
#endif
#if OMPI_HAVE_THREAD_SUPPORT
#include "opal/sys/atomic.h"
#endif /* OMPI_HAVE_THREAD_SUPPORT */
#if OMPI_ENABLE_DEBUG
#include "opal/util/output.h"
#endif
BEGIN_C_DECLS
/**
* @file:
*
* Mutual exclusion functions.
*
* Functions for locking of critical sections.
*/
/*
* declaring this here so that CL does not complain
*/
OPAL_DECLSPEC extern bool opal_uses_threads;
#if OMPI_ENABLE_DEBUG
OPAL_DECLSPEC extern bool opal_mutex_check_locks;
#endif
/**
* Opaque mutex object
*/
typedef struct opal_mutex_t opal_mutex_t;
/**
* Try to acquire a mutex.
*
* @param mutex Address of the mutex.
* @return 0 if the mutex was acquired, 1 otherwise.
*/
static inline int opal_mutex_trylock(opal_mutex_t *mutex);
/**
* Acquire a mutex.
*
* @param mutex Address of the mutex.
*/
static inline void opal_mutex_lock(opal_mutex_t *mutex);
/**
* Release a mutex.
*
* @param mutex Address of the mutex.
*/
static inline void opal_mutex_unlock(opal_mutex_t *mutex);
/**
* Try to acquire a mutex using atomic operations.
*
* @param mutex Address of the mutex.
* @return 0 if the mutex was acquired, 1 otherwise.
*/
static inline int opal_mutex_atomic_trylock(opal_mutex_t *mutex);
/**
* Acquire a mutex using atomic operations.
*
* @param mutex Address of the mutex.
*/
static inline void opal_mutex_atomic_lock(opal_mutex_t *mutex);
/**
* Release a mutex using atomic operations.
*
* @param mutex Address of the mutex.
*/
static inline void opal_mutex_atomic_unlock(opal_mutex_t *mutex);
END_C_DECLS
#ifdef __WINDOWS__
#include "mutex_windows.h"
#else
#include "mutex_unix.h"
#endif
BEGIN_C_DECLS
/**
* Check and see if the process is using multiple threads.
*
* @retval true If the process may have more than one thread.
* @retval false If the process only has a single thread.
*
* The value that this function returns is influenced by:
*
* - how MPI_INIT or MPI_INIT_THREAD was invoked,
* - what the final MPI thread level was determined to be,
* - whether the OMPI or MPI libraries are multi-threaded (Jan 2003:
* they're not),
* - whether configure determined if we have thread support or not
*
* MPI_INIT and MPI_INIT_THREAD (specifically, back-end OMPI startup
* functions) invoke opal_set_using_threads() to influence the value of
* this function, depending on their situation. Some examples:
*
* - if configure determined that we do not have threads, then this
* value will always be false.
*
* - if MPI_INIT is invoked, and the ompi libraries are [still]
* single-threaded, this value will be false.
*
* - if MPI_INIT_THREAD is invoked with MPI_THREAD_MULTIPLE, we have
* thread support, and the final thread level is determined to be
* MPI_THREAD_MULTIPLE, this value will be true.
*
* - if the process is a single-threaded OMPI executable (e.g., mpicc),
* this value will be false.
*
* Hence, this function will return false if there is guaranteed to
* only be one thread in the process. If there is even the
* possibility that we may have multiple threads, true will be
* returned.
*/
#define opal_using_threads() opal_uses_threads
/**
* Set whether the process is using multiple threads or not.
*
* @param have Boolean indicating whether the process is using
* multiple threads or not.
*
* @retval opal_using_threads The new return value from
* opal_using_threads().
*
* This function is used to influence the return value of
* opal_using_threads(). If configure detected that we have thread
* support, the return value of future invocations of
* opal_using_threads() will be the parameter's value. If configure
* detected that we have no thread support, then the retuen from
* opal_using_threads() will always be false.
*/
static inline bool opal_set_using_threads(bool have)
{
#if OMPI_HAVE_THREAD_SUPPORT
opal_uses_threads = have;
#else
have = have; /* just shut up the compiler */
opal_uses_threads = false;
#endif
return opal_uses_threads;
}
/**
* Lock a mutex if opal_using_threads() says that multiple threads may
* be active in the process.
*
* @param mutex Pointer to a opal_mutex_t to lock.
*
* If there is a possibility that multiple threads are running in the
* process (as determined by opal_using_threads()), this function will
* block waiting to lock the mutex.
*
* If there is no possibility that multiple threads are running in the
* process, return immediately.
*/
#if OMPI_HAVE_THREAD_SUPPORT
#define OPAL_THREAD_LOCK(mutex) \
do { \
if (opal_using_threads()) { \
opal_mutex_lock(mutex); \
} \
} while (0)
#elif OMPI_ENABLE_DEBUG
#define OPAL_THREAD_LOCK(mutex) \
do { \
(mutex)->m_lock_debug++; \
if (opal_mutex_check_locks && 1 != (mutex)->m_lock_debug) { \
opal_output(0, "Warning -- mutex already locked at %s:%d," \
" now at %s:%d", \
(mutex)->m_lock_file, \
(mutex)->m_lock_line, \
__FILE__, __LINE__); \
} \
(mutex)->m_lock_file = __FILE__; \
(mutex)->m_lock_line = __LINE__; \
} while (0)
#else
#define OPAL_THREAD_LOCK(mutex)
#endif
/**
* Try to lock a mutex if opal_using_threads() says that multiple
* threads may be active in the process.
*
* @param mutex Pointer to a opal_mutex_t to trylock
*
* If there is a possibility that multiple threads are running in the
* process (as determined by opal_using_threads()), this function will
* trylock the mutex.
*
* If there is no possibility that multiple threads are running in the
* process, return immediately without modifying the mutex.
*
* Returns 0 if mutex was locked, non-zero otherwise.
*/
#if OMPI_HAVE_THREAD_SUPPORT
#define OPAL_THREAD_TRYLOCK(mutex) (opal_using_threads() ? opal_mutex_trylock(mutex) : 0)
#elif OMPI_ENABLE_DEBUG
static inline int
opal_thread_debug_trylock(opal_mutex_t *mutex, const char *file, int line)
{
int ret = -1;
if (0 == (mutex)->m_lock_debug) {
(mutex)->m_lock_debug++;
(mutex)->m_lock_file = file;
(mutex)->m_lock_line = line;
ret = 0;
} else {
if (opal_mutex_check_locks) {
opal_output(0, "Warning -- during trylock, mutex already locked at %s:%d "
"now at %s:%d",
file, line,
(mutex)->m_lock_file,
(mutex)->m_lock_line);
}
}
return ret;
}
#define OPAL_THREAD_TRYLOCK(mutex) opal_thread_debug_trylock(mutex, __FILE__, __LINE__)
#else
#define OPAL_THREAD_TRYLOCK(mutex) 0
#endif
/**
* Unlock a mutex if opal_using_threads() says that multiple threads
* may be active in the process.
*
* @param mutex Pointer to a opal_mutex_t to unlock.
*
* If there is a possibility that multiple threads are running in the
* process (as determined by opal_using_threads()), this function will
* unlock the mutex.
*
* If there is no possibility that multiple threads are running in the
* process, return immediately without modifying the mutex.
*/
#if OMPI_HAVE_THREAD_SUPPORT
#define OPAL_THREAD_UNLOCK(mutex) \
do { \
if (opal_using_threads()) { \
opal_mutex_unlock(mutex); \
} \
} while (0)
#elif OMPI_ENABLE_DEBUG
#define OPAL_THREAD_UNLOCK(mutex) \
do { \
(mutex)->m_lock_debug--; \
if (opal_mutex_check_locks && 0 > (mutex)->m_lock_debug) { \
opal_output(0, "Warning -- mutex was double locked from %s:%d", \
__FILE__, __LINE__); \
} else if (opal_mutex_check_locks && 0 > (mutex)->m_lock_debug) { \
opal_output(0, "Warning -- mutex not locked from %s:%d", \
__FILE__, __LINE__); \
} else { \
(mutex)->m_lock_file = NULL; \
(mutex)->m_lock_line = 0; \
} \
} while (0)
#else
#define OPAL_THREAD_UNLOCK(mutex)
#endif
/**
* Lock a mutex if opal_using_threads() says that multiple threads may
* be active in the process for the duration of the specified action.
*
* @param mutex Pointer to a opal_mutex_t to lock.
* @param action A scope over which the lock is held.
*
* If there is a possibility that multiple threads are running in the
* process (as determined by opal_using_threads()), this function will
* acquire the lock before invoking the specified action and release
* it on return.
*
* If there is no possibility that multiple threads are running in the
* process, invoke the action without acquiring the lock.
*/
#if OMPI_HAVE_THREAD_SUPPORT
#define OPAL_THREAD_SCOPED_LOCK(mutex, action) \
do { \
if(opal_using_threads()) { \
opal_mutex_lock(mutex); \
(action); \
opal_mutex_unlock(mutex); \
} else { \
(action); \
} \
} while (0)
#elif OMPI_ENABLE_DEBUG
#define OPAL_THREAD_SCOPED_LOCK(mutex, action) \
do { \
if (0 != (mutex)->m_lock_debug) { \
opal_output(0, "scoped_lock: Warning -- mutex already " \
"locked at %s:%d, now at %s:%d", \
__FILE__, __LINE__, \
(mutex)->m_lock_file, \
(mutex)->m_lock_line); \
} \
(mutex)->m_lock_debug--; \
(action); \
(mutex)->m_lock_debug++; \
} while (0)
#else
#define OPAL_THREAD_SCOPED_LOCK(mutex, action) (action)
#endif
/**
* Use an atomic operation for increment/decrement if opal_using_threads()
* indicates that threads are in use by the application or library.
*/
#if OMPI_HAVE_THREAD_SUPPORT
#define OPAL_THREAD_ADD32(x,y) \
(opal_using_threads() ? opal_atomic_add_32(x,y) : (*x += y))
#else
#define OPAL_THREAD_ADD32(x,y) (*x += y)
#endif
#if OMPI_HAVE_THREAD_SUPPORT
#define OPAL_THREAD_ADD64(x,y) \
(opal_using_threads() ? opal_atomic_add_64(x,y) : (*x += y))
#else
#define OPAL_THREAD_ADD64(x,y) (*x += y)
#endif
#if OMPI_HAVE_THREAD_SUPPORT
#define OPAL_THREAD_ADD_SIZE_T(x,y) \
(opal_using_threads() ? opal_atomic_add_size_t(x,y) : (*x += y))
#else
#define OPAL_THREAD_ADD_SIZE_T(x,y) (*x += y)
#endif
#define OPAL_CMPSET(x, y, z) ((*(x) == (y)) ? ((*(x) = (z)), 1) : 0)
#if OMPI_HAVE_THREAD_SUPPORT
# if OPAL_HAVE_ATOMIC_CMPSET_32
# define OPAL_ATOMIC_CMPSET_32(x, y, z) \
(opal_using_threads() ? opal_atomic_cmpset_32(x, y, z) : OPAL_CMPSET(x, y, z))
# endif
# if OPAL_HAVE_ATOMIC_CMPSET_64
# define OPAL_ATOMIC_CMPSET_64(x, y, z) \
(opal_using_threads() ? opal_atomic_cmpset_64(x, y, z) : OPAL_CMPSET(x, y, z))
# endif
# if OPAL_HAVE_ATOMIC_CMPSET_32 || OPAL_HAVE_ATOMIC_CMPSET_64
# define OPAL_ATOMIC_CMPSET(x, y, z) \
(opal_using_threads() ? opal_atomic_cmpset(x, y, z) : OPAL_CMPSET(x, y, z))
# endif
#else
# if OPAL_HAVE_ATOMIC_CMPSET_32
# define OPAL_ATOMIC_CMPSET_32(x, y, z) OPAL_CMPSET(x, y, z)
# endif
# if OPAL_HAVE_ATOMIC_CMPSET_64
# define OPAL_ATOMIC_CMPSET_64(x, y, z) OPAL_CMPSET(x, y, z)
# endif
# if OPAL_HAVE_ATOMIC_CMPSET_32 || OPAL_HAVE_ATOMIC_CMPSET_64
# define OPAL_ATOMIC_CMPSET(x, y, z) OPAL_CMPSET(x, y, z)
# endif
#endif
END_C_DECLS
#endif /* OPAL_MUTEX_H */