ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
026a884468
openmpi/autogen.sh
Brian Barrett 1302cb4072 The next in a long line of crazed build system changes from Brian. This was 
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install).  Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am).  Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed.  This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)

This commit was SVN r7777.
2005-10-17 00:21:10 +00:00

1094 строки
32 KiB
Bash
Исполняемый файл
Исходник Ответственный История

#! /bin/bash
#
# Copyright (c) 2004-2005 The Trustees of Indiana University.
# All rights reserved.
# Copyright (c) 2004-2005 The Trustees of the University of Tennessee.
# All rights reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
# University of Stuttgart. All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
# All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This script is run on developer copies of Open MPI -- *not*
# distribution tarballs.
#set -x
##############################################################################
#
# User-definable parameters (search path and minimum supported versions)
#
# Note: use ';' to separate parameters
##############################################################################
ompi_aclocal_search="aclocal"
if test ! -z "$ACLOCAL"; then
ompi_aclocal_search="$ACLOCAL"
fi
ompi_autoheader_search="autoheader"
if test ! -z "$AUTOHEADER"; then
ompi_autoheader_search="$AUTOHEADER"
fi
ompi_autoconf_search="autoconf"
if test ! -z "$AUTOCONF"; then
ompi_autoconf_search="$AUTOCONF"
fi
ompi_libtoolize_search="libtoolize;glibtoolize"
if test ! -z "$LIBTOOLIZE"; then
ompi_libtoolize_search="$LIBTOOLIZE"
fi
ompi_automake_search="automake"
if test ! -z "$AUTOMAKE"; then
ompi_automake_search="$AUTOMAKE"
fi
ompi_automake_version="1.9"
ompi_autoconf_version="2.58"
ompi_libtool_version="1.5.16"
##############################################################################
#
# Global variables - should not need to modify defaults
#
##############################################################################
ompi_aclocal_version="$ompi_automake_version"
ompi_autoheader_version="$ompi_autoconf_version"
ompi_libtoolize_version="$ompi_libtool_version"
# program names to execute
ompi_aclocal=""
ompi_autoheader=""
ompi_autoconf=""
ompi_libtoolize=""
ompi_automake=""
mca_no_configure_components_file="config/mca_no_configure_components.m4"
mca_no_config_list_file="mca_no_config_list"
mca_no_config_env_file="mca_no_config_env"
mca_m4_include_file="mca_m4_config_include.m4"
mca_m4_config_env_file="mca_m4_config_env"
autogen_subdir_file="autogen.subdirs"
############################################################################
#
# Version check - does major,minor,release check (hopefully ignoring
# beta et al)
#
# INPUT:
# - minimum version allowable
# - version we found
#
# OUTPUT:
# - 0 version is ok
# - 1 version is not ok
#
# SIDE EFFECTS:
# none
#
##############################################################################
check_version() {
local min_version="$1"
local version="$2"
local min_major_version="`echo $min_version | cut -f1 -d.`"
local min_minor_version="`echo $min_version | cut -f2 -d.`"
local min_release_version="`echo $min_version | cut -f3 -d.`"
if test "$min_release_version" = "" ; then
min_release_version=0
fi
local major_version="`echo $version | cut -f1 -d.`"
local minor_version="`echo $version | cut -f2 -d.`"
local release_version="`echo $version | cut -f3 -d.`"
if test "$release_version" = "" ; then
release_version=0
fi
if test $min_major_version -lt $major_version ; then
return 0
elif test $min_major_version -gt $major_version ; then
return 1
fi
if test $min_minor_version -lt $minor_version ; then
return 0
elif test $min_minor_version -gt $minor_version ; then
return 1
fi
if test $min_release_version -gt $release_version ; then
return 1
fi
return 0
}
##############################################################################
#
# find app - find a version of the given application that is new
# enough for use
#
# INPUT:
# - name of application (eg aclocal)
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - sets application_name variable to working executable name
# - aborts on error finding application
#
##############################################################################
find_app() {
local app_name="$1"
local version="0.0.0"
local min_version="99.99.99"
local found=0
local tmpIFS=$IFS
eval "min_version=\"\$ompi_${app_name}_version\""
eval "search_path=\"\$ompi_${app_name}_search\""
IFS=";"
for i in $search_path ; do
IFS="$tmpIFS"
version="`${i} --version 2>&1`"
if test "$?" != 0 ; then
IFS=";"
continue
fi
version="`echo $version | cut -f2 -d')'`"
version="`echo $version | cut -f1 -d' '`"
if check_version $min_version $version ; then
eval "ompi_${app_name}=\"${i}\""
found=1
break
fi
done
IFS="$tmpIFS"
if test "$found" = "0" ; then
cat <<EOF
I could not find a recent enough copy of ${app_name}.
I am gonna abort. :-(
Please make sure you are using at least the following versions of the
GNU tools:
GNU Autoconf $ompi_autoconf_version
GNU Automake $ompi_automake_version
NOTE: You may need Automake 1.8.5 (or higher) in order to run
"make dist" successfully
GNU Libtool $ompi_libtool_version
EOF
exit 1
fi
}
##############################################################################
#
# run_and_check - run the right GNU tool, printing warning on failure
#
# INPUT:
# - name of application (eg aclocal)
# - program arguments
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - aborts on error running application
#
##############################################################################
run_and_check() {
local rac_progs="$*"
echo "[Running] $rac_progs"
eval $rac_progs
if test "$?" != 0; then
cat <<EOF
-------------------------------------------------------------------------
It seems that the execution of "$rac_progs" has failed. See above for
the specific error message that caused it to abort.
This *MAY* be caused by an older version of one of the required
packages. Please make sure you are using at least the following
versions:
GNU Autoconf $ompi_autoconf_version
GNU Automake $ompi_automake_version
GNU Libtool $ompi_libtool_version
-------------------------------------------------------------------------
EOF
exit 1
fi
}
##############################################################################
#
# find_and_delete - look for standard files in a number of common places
# (e.g., ./config.guess, config/config.guess, dist/config.guess), and
# delete it. If it's not found there, look for AC_CONFIG_AUX_DIR in
# the configure.in script and try there. If it's not there, oh well.
#
# INPUT:
# - file to delete
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - files may disappear
#
##############################################################################
find_and_delete() {
local fad_file="$1"
local fad_cfile
local auxdir
# Look for the file in "standard" places
if test -f $fad_file; then
rm -f $fad_file
elif test -d config/$fad_file; then
rm -f config/$fad_file
elif test -d dist/$fad_file; then
rm -f dist/$fad_file
else
# Didn't find it -- look for an AC_CONFIG_AUX_DIR line in
# configure.[in|ac]
if test -f configure.in; then
fad_cfile=configure.in
elif test -f configure.ac; then
fad_cfile=configure.ac
else
echo "--> Errr... there's no configure.in or configure.ac file!"
fi
if test -n "$fad_cfile"; then
auxdir="`grep AC_CONFIG_AUX_DIR $fad_cfile | cut -d\( -f 2 | cut -d\) -f 1`"
fi
if test -f "$auxdir/$fad_file"; then
rm -f "$auxdir/$fad_file"
fi
fi
}
##############################################################################
#
# run_gnu_tools - run the GNU tools in a given directory
#
# INPUT:
# - OMPI top directory
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - assumes that the directory is ready to have the GNU tools run
# in it (i.e., there's some form of configure.*)
# - may preprocess the directory before running the GNU tools
# (e.g., generale Makefile.am's from configure.params, etc.)
#
##############################################################################
run_gnu_tools() {
rgt_ompi_topdir="$1"
# Sanity check to ensure that there's a configure.in or
# configure.ac file here, or if there's a configure.params
# file and we need to run make_configure.pl.
if test -f configure.params -a -f configure.stub -a \
-x "$rgt_ompi_topdir/config/mca_make_configure.pl"; then
cat <<EOF
*** Found configure.stub
*** Running mca_make_configure.pl
EOF
"$rgt_ompi_topdir/config/mca_make_configure.pl" \
--ompidir "$rgt_ompi_topdir" \
--componentdir "`pwd`"
if test "$?" != "0"; then
echo "*** autogen.sh failed to complete!"
exit 1
fi
# If we need to make a version header template file, do so
rgt_abs_dir="`pwd`"
rgt_component_name="`basename \"$rgt_abs_dir\"`"
rgt_component_type="`dirname \"$rgt_abs_dir\"`"
rgt_component_type="`basename \"$rgt_component_type\"`"
rgt_ver_header="$rgt_abs_dir/$rgt_component_type-$rgt_component_name-version.h"
rgt_ver_header_base="`basename \"$rgt_ver_header\"`"
make_version_header_template "$rgt_ver_header_base" "$rgt_component_type" "$rgt_component_name"
happy=1
file=configure.ac
elif test -f configure.in; then
happy=1
file=configure.in
elif test -f configure.ac; then
happy=1
file=configure.ac
else
cat <<EOF
--> Err... there's no configure.in or configure.ac file in this directory
--> Confused; aborting in despair
EOF
exit 1
fi
unset happy
# Find and delete the GNU helper script files
find_and_delete config.guess
find_and_delete config.sub
find_and_delete depcomp
find_and_delete install-sh
find_and_delete ltconfig
find_and_delete ltmain.sh
find_and_delete missing
find_and_delete mkinstalldirs
find_and_delete libtool
# Run the GNU tools
echo "*** Running GNU tools"
run_and_check $ompi_aclocal
if test "`grep AC_CONFIG_HEADER $file`" != "" -o \
"`grep AM_CONFIG_HEADER $file`" != ""; then
run_and_check $ompi_autoheader
fi
run_and_check $ompi_autoconf
# We only need the libltdl stuff for the top-level
# configure, not any of the MCA components.
if test -f include/mpi.h.in; then
rm -rf libltdl opal/libltdl opal/ltdl.h
run_and_check $ompi_libtoolize --automake --copy --ltdl
mv libltdl opal
echo "Adjusting libltdl for OMPI :-("
echo " -- patching for argz bugfix in libtool 1.5"
cd opal/libltdl
if test "`grep 'while ((before >= *pargz) && (before[-1] != LT_EOS_CHAR))' ltdl.c`" != ""; then
patch -N -p0 <<EOF
--- ltdl.c.old 2003-11-26 16:42:17.000000000 -0500
+++ ltdl.c 2003-12-03 17:06:27.000000000 -0500
@@ -682,7 +682,7 @@
/* This probably indicates a programmer error, but to preserve
semantics, scan back to the start of an entry if BEFORE points
into the middle of it. */
- while ((before >= *pargz) && (before[-1] != LT_EOS_CHAR))
+ while ((before > *pargz) && (before[-1] != LT_EOS_CHAR))
--before;
{
EOF
#'
else
echo " ==> your libtool doesn't need this! yay!"
fi
cd ../..
echo " -- patching configure for broken -c/-o compiler test"
sed -e 's/chmod -w \./#OMPI\/MPI FIX: chmod -w ./' \
configure > configure.new
mv configure.new configure
chmod a+x configure
else
run_and_check $ompi_libtoolize --automake --copy
fi
run_and_check $ompi_automake --foreign -a --copy --include-deps
}
##############################################################################
#
# run_no_configure_component
# Prepares the non-configure component
#
# INPUT:
# - OMPI top directory
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
#
##############################################################################
run_no_configure_component() {
noconf_dir="$1"
noconf_ompi_topdir="$2"
noconf_project="$3"
noconf_framework="$4"
noconf_component="$5"
# Write out to two files (they're merged at the end)
noconf_list_file="$noconf_ompi_topdir/$mca_no_config_list_file"
noconf_env_file="$noconf_ompi_topdir/$mca_no_config_env_file"
cat >> "$noconf_list_file" <<EOF
dnl ----------------------------------------------------------------
dnl No-configure component:
dnl $noconf_dir
EOF
# Tell configure to add all the PARAM_CONFIG_FILES to
# the AC_CONFIG_FILES list.
for file in $PARAM_CONFIG_FILES; do
echo "AC_CONFIG_FILES([$noconf_dir/$file])" >> "$noconf_list_file"
done
cat <<EOF
--> Adding to top-level configure no-configure subdirs:
--> $noconf_dir
--> Adding to top-level configure AC_CONFIG_FILES list:
--> $PARAM_CONFIG_FILES
EOF
echo "$PARAM_CONFIG_PRIORITY $noconf_component" >> "$noconf_env_file"
}
##############################################################################
#
# run_m4_configure_component
# Prepares the component with an .m4 file that should be used to
# configure the component.
#
# INPUT:
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
#
##############################################################################
run_m4_configure_component() {
m4conf_dir="$1"
m4conf_ompi_topdir="$2"
m4conf_project="$3"
m4conf_framework="$4"
m4conf_component="$5"
# Write out to two files (they're merged at the end)
m4conf_list_file="$m4conf_ompi_topdir/$mca_no_config_list_file"
m4conf_env_file="$m4conf_ompi_topdir/$mca_m4_config_env_file"
cat >> "$m4conf_list_file" <<EOF
dnl ----------------------------------------------------------------
dnl m4-configure component:
dnl $m4conf_dir
EOF
# Tell configure to add all the PARAM_CONFIG_FILES to
# the AC_CONFIG_FILES list.
for file in $PARAM_CONFIG_FILES; do
echo "AC_CONFIG_FILES([$m4conf_dir/$file])" >> "$m4conf_list_file"
done
# add the m4_include of the m4 file into the mca .m4 file
# directly. It shouldn't be in a macro, so this is fairly safe to
# do. By this point, there should already be a header and all
# that. m4_includes are relative to the currently included file,
# so need the .. to get us from config/ to the topsrcdir again.
echo "m4_include(${m4conf_project}/mca/${m4conf_framework}/${m4conf_component}/configure.m4)" >> "$m4conf_ompi_topdir/$mca_m4_include_file"
cat <<EOF
--> Adding to top-level configure m4-configure subdirs:
--> $m4conf_dir
--> Adding to top-level configure AC_CONFIG_FILES list:
--> $PARAM_CONFIG_FILES
EOF
echo "$PARAM_CONFIG_PRIORITY $m4conf_component" >> "$m4conf_env_file"
}
##############################################################################
#
# process_dir - look at the files present in a given directory, and do
# one of the following:
# - skip/ignore it
# - run custom autogen.sh in it
# - run the GNU tools in it
# - get a list of Makefile.am's to add to the top-level configure
#
# INPUT:
# - directory to run in
# - OMPI top directory
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
# - skips directories with .ompi_no_gnu .ompi_ignore
# - uses provided autogen.sh if available
#
##############################################################################
process_dir() {
pd_dir="$1"
pd_ompi_topdir="$2"
pd_project="$3"
pd_framework="$4"
pd_component="$5"
pd_cur_dir="`pwd`"
# Convert to absolutes
if test -d "$pd_dir"; then
cd "$pd_dir"
pd_abs_dir="`pwd`"
cd "$pd_cur_dir"
fi
if test -d "$pd_ompi_topdir"; then
cd "$pd_ompi_topdir"
pd_ompi_topdir="`pwd`"
cd "$pd_cur_dir"
fi
# clean our environment a bit, since we might evaluate a configure.params
unset PARAM_CONFIG_FILES
PARAM_CONFIG_PRIORITY="0"
if test -d "$pd_dir"; then
cd "$pd_dir"
# See if the package doesn't want us to set it up
if test -f .ompi_no_gnu; then
cat <<EOF
*** Found .ompi_no_gnu file -- skipping GNU setup in:
*** `pwd`
EOF
elif test -f .ompi_ignore -a ! -f .ompi_unignore; then
# Note that if we have an empty (but existant)
# .ompi_unignore, then we ignore the .ompi_ignore file
# (and therefore build the component)
cat <<EOF
*** Found .ompi_ignore file -- skipping entire tree:
*** `pwd`
EOF
# Use && instead of -a here for the test conditions because if
# you use -a, then "test" will execute *all* condition clauses
# (even if the first one is false), meaning that grep will
# fail if there is no .ompi_unignore file. If you use &&,
# then the latter tests will not be executed if a prior one
# fails (i.e., grep won't run if .ompi_unignore does not
# exist).
elif test -f .ompi_ignore && \
test -s .ompi_unignore && \
test -z "`grep -E $USER\$\|$USER@$HOST .ompi_unignore`" ; then
# If we have a non-empty .ompi_unignore and our username
# is in there somewhere, we ignore the .ompi_ignore (and
# therefore build the component). Otherwise, this
# condition is true and we don't configure.
cat <<EOF
*** Found .ompi_ignore file and .ompi_unignore didn't invalidate --
*** skipping entire tree:
*** `pwd`
EOF
elif test "$pd_abs_dir" != "$pd_ompi_topdir" -a -x autogen.sh; then
cat <<EOF
*** Found custom autogen.sh file in:
*** `pwd`
EOF
./autogen.sh
elif test -f configure.params -a -f configure.m4 ; then
cat <<EOF
*** Found configure.params and configure.m4
*** `pwd`
EOF
. ./configure.params
if test -z "$PARAM_CONFIG_FILES"; then
cat <<EOF
*** No PARAM_CONFIG_FILES!
*** Nothing to do -- skipping this directory
EOF
else
# temporary workaround - remove possibly there configure code
rm -f "configure" "configure.ac*" "acinclude*" "aclocal.m4"
run_m4_configure_component "$pd_dir" "$pd_ompi_topdir" \
"$pd_project" "$pd_framework" "$pd_component"
fi
elif test -f configure.ac -o -f configure.in; then
# If we have configure.ac or configure.in, run the GNU
# tools here
cat <<EOF
*** Found configure.(in|ac)
*** `pwd`
EOF
run_gnu_tools "$pd_ompi_topdir"
elif test -f configure.params -a -f configure.stub; then
cat <<EOF
*** Found configure.params and configure.stub
*** `pwd`
EOF
run_gnu_tools "$pd_ompi_topdir"
elif test -f configure.params; then
cat <<EOF
*** Found configure.params
*** `pwd`
EOF
. ./configure.params
if test -z "$PARAM_CONFIG_FILES"; then
cat <<EOF
*** No PARAM_CONFIG_FILES!
*** Nothing to do -- skipping this directory
EOF
else
run_no_configure_component "$pd_dir" "$pd_ompi_topdir" \
"$pd_project" "$pd_framework" "$pd_component"
fi
else
cat <<EOF
*** Nothing found; directory skipped
*** `pwd`
EOF
fi
# See if there's a file containing additional directories to
# traverse. Shell scripts aren't too good at recursion (no
# local state!), so just have a child autogen.sh do the work.
if test -f $autogen_subdir_file; then
pd_subdir_start_dir="`pwd`"
echo ""
echo "==> Found $autogen_subdir_file -- sub-traversing..."
echo ""
for dir in `cat $autogen_subdir_file`; do
if test -d "$dir"; then
echo "*** Running autogen.sh in $dir"
echo "*** (started in $pd_subdir_start_dir)"
cd "$dir"
$pd_ompi_topdir/autogen.sh -l
cd "$pd_subdir_start_dir"
echo ""
fi
done
echo "<== Back in $pd_subdir_start_dir"
echo "<== autogen.sh continuing..."
fi
# Go back to the topdir
cd "$pd_cur_dir"
fi
unset PARAM_CONFIG_FILES PARAM_VERSION_FILE
unset pd_dir pd_ompi_topdir pd_cur_dir pd_component_type
}
##############################################################################
#
# make_template_version_header -- make a templated version header
# file, but only if we have a PARAM_VERSION_FILE that exists
#
# INPUT:
# - filename base
# - component type name
# - component name
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
#
##############################################################################
make_version_header_template() {
mvht_filename="$1"
mvht_component_type="$2"
mvht_component_name="$3"
# See if we have a VERSION file
PARAM_CONFIG_FILES_save="$PARAM_CONFIG_FILES"
. ./configure.params
if test -z "$PARAM_VERSION_FILE"; then
if test -f "VERSION"; then
PARAM_VERSION_FILE="VERSION"
fi
else
if test ! -f "$PARAM_VERSION_FILE"; then
PARAM_VERSION_FILE=
fi
fi
if test -n "$PARAM_VERSION_FILE" -a -f "$PARAM_VERSION_FILE" -a \
"$pd_component_type" != "common"; then
rm -f "$mvht_filename.template.in"
cat > "$mvht_filename.template.in" <<EOF
/*
* This file is automatically created by autogen.sh; it should not
* be edited by hand!!
*
* List of version number for this component
*/
#ifndef MCA_${mvht_component_type}_${mvht_component_name}_VERSION_H
#define MCA_${mvht_component_type}_${mvht_component_name}_VERSION_H
#define MCA_${mvht_component_type}_${mvht_component_name}_MAJOR_VERSION @MCA_${mvht_component_type}_${mvht_component_name}_MAJOR_VERSION@
#define MCA_${mvht_component_type}_${mvht_component_name}_MINOR_VERSION @MCA_${mvht_component_type}_${mvht_component_name}_MINOR_VERSION@
#define MCA_${mvht_component_type}_${mvht_component_name}_RELEASE_VERSION @MCA_${mvht_component_type}_${mvht_component_name}_RELEASE_VERSION@
#define MCA_${mvht_component_type}_${mvht_component_name}_GREEK_VERSION "@MCA_${mvht_component_type}_${mvht_component_name}_GREEK_VERSION@"
#define MCA_${mvht_component_type}_${mvht_component_name}_SVN_VERSION "@MCA_${mvht_component_type}_${mvht_component_name}_SVN_VERSION@"
#define MCA_${mvht_component_type}_${mvht_component_name}_VERSION "@MCA_${mvht_component_type}_${mvht_component_name}_VERSION@"
#endif /* MCA_${mvht_component_type}_${mvht_component_name}_VERSION_H */
EOF
fi
PARAM_CONFIG_FILES="$PARAM_CONFIG_FILES_save"
unset PARAM_VERSION_FILE PARAM_CONFIG_FILES_save
}
component_list_sort() {
cls_filename="$1"
# why, oh, why can't non-gnu sort support the -s (stable) option?
# Solaris sort supports -r -n and -u, so we'll assume that works everywhere
# get the list of priorities
component_list=
cls_priority_list="`sort -r -n -u \"$cls_filename\" | cut -f1 -d' ' | xargs`"
for cls_priority in $cls_priority_list ; do
component_list="$component_list `grep \"^$cls_priority \" \"$cls_filename\" | cut -f2 -d' ' | xargs`"
done
}
##############################################################################
#
# run_global - run the config in the top OMPI dir and all MCA components
#
# INPUT:
# none
#
# OUTPUT:
# none
#
# SIDE EFFECTS:
#
##############################################################################
run_global() {
# [Re-]Create the mca_component_list file
rm -f "$mca_no_configure_components_file" "$mca_no_config_list_file" \
"$mca_no_config_env_file" "$mca_m4_config_env_file" "$mca_m4_include_file"
touch "$mca_no_configure_components_file" "$mca_no_config_list_file" \
"$mca_m4_config_env_file" "$mca_m4_include_file"
# create header for the component m4 include file
cat > "$mca_m4_include_file" <<EOF
dnl
dnl \$HEADER
dnl
dnl This file is automatically created by autogen.sh; it should not
dnl be edited by hand!!
EOF
#create header for the component config file
cat > "$mca_no_configure_components_file" <<EOF
dnl
dnl \$HEADER
dnl
dnl This file is automatically created by autogen.sh; it should not
dnl be edited by hand!!
EOF
# Now run the config in every directory in <location>/mca/*/*
# that has a configure.in or configure.ac script
#
# In order to deal with components that have .m4 files, we need to
# build up m4_defined lists along the way. Unfortunately, there
# is no good way to do this at the end (stupid sh), so we have to
# do it as we are going through the lists of frameworks and
# components. Use a file to keep the list of components (we don't
# want every component in a framework included, as the
# determination about skipping components or whether the component
# has its own configure script are made later on in the process.
rg_cwd="`pwd`"
echo $rg_cwd
project_list=""
for project_path in $config_project_list; do
project="`basename \"$project_path\"`"
project_list="$project_list $project"
framework_list=""
for framework_path in $project_path/mca/*; do
framework="`basename \"$framework_path\"`"
if test "$framework" != "base" -a \
-d "$framework_path" ; then
if test "$framework" = "common" -o \
-r "${framework_path}/${framework}.h" ; then
framework_list="$framework_list $framework"
# Add the framework's configure file into configure,
# if there is one
if test -r "${framework_path}/configure.m4" ; then
echo "m4_include(${framework_path}/configure.m4)" >> "$mca_m4_include_file"
fi
rm -f "$mca_no_config_env_file" "$mca_m4_config_env_file"
touch "$mca_no_config_env_file" "$mca_m4_config_env_file"
for component_path in "$framework_path"/*; do
if test -d "$component_path"; then
if test -f "$component_path/configure.in" -o \
-f "$component_path/configure.params" -o \
-f "$component_path/configure.ac"; then
component="`basename \"$component_path\"`"
process_dir "$component_path" "$rg_cwd" \
"$project" "$framework" "$component"
fi
fi
done
fi
# make list of components that are "no configure".
# Sort the list by priority (stable, so things stay in
# alphabetical order at the same priority), then munge
# it into form we like
component_list=
component_list_sort $mca_no_config_env_file
component_list_define="m4_define(mca_${framework}_no_config_component_list, ["
component_list_define_first="1"
for component in $component_list ; do
if test "$component_list_define_first" = "1"; then
component_list_define="${component_list_define}${component}"
component_list_define_first="0"
else
component_list_define="${component_list_define}, ${component}"
fi
done
component_list_define="${component_list_define}])"
echo "$component_list_define" >> "$mca_no_configure_components_file"
# make list of components that are "m4 configure"
component_list=
component_list_sort $mca_m4_config_env_file
component_list_define="m4_define(mca_${framework}_m4_config_component_list, ["
component_list_define_first="1"
for component in $component_list ; do
if test "$component_list_define_first" = "1"; then
component_list_define="${component_list_define}${component}"
component_list_define_first="0"
else
component_list_define="${component_list_define}, ${component}"
fi
done
component_list_define="${component_list_define}])"
echo "$component_list_define" >> "$mca_no_configure_components_file"
fi
done
# make list of frameworks for this project
framework_list_define="m4_define(mca_${project}_framework_list, ["
framework_list_define_first="1"
for framework in $framework_list ; do
if test "$framework_list_define_first" = "1"; then
framework_list_define="${framework_list_define}${framework}"
framework_list_define_first="0"
else
framework_list_define="${framework_list_define}, ${framework}"
fi
done
framework_list_define="${framework_list_define}])"
echo "$framework_list_define" >> "$mca_no_configure_components_file"
done
# create the m4 defines for the list of projects. The list of
# frameworks for each project is already created and in the file.
project_list_define="m4_define(mca_project_list, ["
project_list_define_first="1"
for project in $project_list ; do
if test "$project_list_define_first" = "1"; then
project_list_define="${project_list_define}${project}"
project_list_define_first="0"
else
project_list_define="${project_list_define}, ${project}"
fi
done
project_list_define="${project_list_define}])"
echo "$project_list_define" >> "$mca_no_configure_components_file"
cat >> "$mca_no_configure_components_file" <<EOF
dnl List all the no-configure components that we found, and AC_DEFINE
dnl their versions
AC_DEFUN([MCA_NO_CONFIG_CONFIG_FILES],[
`cat $mca_no_config_list_file`
])dnl
EOF
# Remove temp files
rm -f $mca_no_config_list_file $mca_no_config_env_file $mca_m4_config_env_file
# Finally, after we found all the no-configure MCA components, run
# the config in the top-level directory
process_dir . . "" "" ""
unset project project_path framework framework_path component component_path
}
##############################################################################
#
# main - do the real work...
#
##############################################################################
# announce
echo "[Checking] command line parameters"
# Check the command line to see if we should run the whole shebang, or
# just in this current directory.
want_local=no
ompidir=
no_ompi=0
no_orte=0
for arg in $*; do
case $arg in
-l) want_local=yes ;;
-ompidir|--ompidir|-ompi|--ompi) ompidir="$2" ;;
-no-ompi) no_ompi=1 ;;
-no-orte) no_orte=1 ;;
*) ;;
esac
shift
done
# announce
echo "[Checking] prerequisites"
# sanity check to make sure user isn't being stupid
if test ! -d .svn ; then
cat <<EOF
This doesn't look like a developer copy of Open MPI. You probably do not
want to run autogen.sh - it is normally not needed for a release source
tree. Giving you 5 seconds to reconsider and kill me.
EOF
sleep 5
fi
# locations to look for mca modules
config_project_list="opal orte ompi"
if test "$no_ompi" = "1" ; then
config_project_list="opal orte"
fi
if test "$no_orte" = "1" ; then
config_project_list="opal"
fi
echo "Configuring projects: $config_project_list"
# figure out if we're at the top level of the OMPI tree, a component's
# top-level directory, or somewhere else.
if test -f VERSION -a -f configure.ac -a -f include/mpi.h.in ; then
# Top level of OMPI tree
ompidir="`pwd`"
elif test -f configure.in -o -f configure.ac -o -f configure.params ; then
# Top level of a component directory
want_local=yes
if test -z "$ompidir"; then
ompidir="../../../.."
fi
else
cat <<EOF
You must run this script from either the top level of the OMPI
directory tree or the top-level of an MCA component directory tree.
EOF
exit 1
fi
# find all the apps we are going to run
find_app "aclocal"
find_app "autoheader"
find_app "autoconf"
find_app "libtoolize"
find_app "automake"
# do the work
if test "$want_local" = "yes"; then
process_dir . $ompidir
else
run_global
fi
# All done
exit 0
Показать git blame Копировать постоянную ссылку