/* * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana * University Research and Technology * Corporation. All rights reserved. * Copyright (c) 2004-2005 The University of Tennessee and The University * of Tennessee Research Foundation. All rights * reserved. * Copyright (c) 2004-2010 High Performance Computing Center Stuttgart, * University of Stuttgart. All rights reserved. * Copyright (c) 2004-2005 The Regents of the University of California. * All rights reserved. * Copyright (c) 2009 Sun Microsystems, Inc. All rights reserved. * Copyright (c) 2009-2013 Cisco Systems, Inc. All rights reserved. * Copyright (c) 2013 Mellanox Technologies, Inc. * All rights reserved. * $COPYRIGHT$ * * Additional copyrights may follow * * $HEADER$ * * This file is included at the bottom of opal_config.h, and is * therefore a) after all the #define's that were output from * configure, and b) included in most/all files in Open MPI. * * Since this file is *only* ever included by opal_config.h, and * opal_config.h already has #ifndef/#endif protection, there is no * need to #ifndef/#endif protection here. */ #ifndef OPAL_CONFIG_H #error "opal_config_bottom.h should only be included from opal_config.h" #endif /* * If we build a static library, Visual C define the _LIB symbol. In the * case of a shared library _USERDLL get defined. * * OMPI_BUILDING and _LIB define how opal_config.h * handles configuring all of Open MPI's "compatibility" code. Both * constants will always be defined by the end of opal_config.h. * * OMPI_BUILDING affects how much compatibility code is included by * opal_config.h. It will always be 1 or 0. The user can set the * value before including either mpi.h or opal_config.h and it will be * respected. If opal_config.h is included before mpi.h, it will * default to 1. If mpi.h is included before opal_config.h, it will * default to 0. */ #ifndef OMPI_BUILDING #define OMPI_BUILDING 1 #endif /* * Flex is trying to include the unistd.h file. As there is no configure * option or this, the flex generated files will try to include the file * even on platforms without unistd.h. Therefore, if we * know this file is not available, we can prevent flex from including it. */ #ifndef HAVE_UNISTD_H #define YY_NO_UNISTD_H #endif /*********************************************************************** * * code that should be in ompi_config_bottom.h regardless of build * status * **********************************************************************/ /* Do we have posix or solaris thread lib */ #define OPAL_HAVE_THREADS (OPAL_HAVE_POSIX_THREADS) /* * BEGIN_C_DECLS should be used at the beginning of your declarations, * so that C++ compilers don't mangle their names. Use END_C_DECLS at * the end of C declarations. */ #undef BEGIN_C_DECLS #undef END_C_DECLS #if defined(c_plusplus) || defined(__cplusplus) # define BEGIN_C_DECLS extern "C" { # define END_C_DECLS } #else #define BEGIN_C_DECLS /* empty */ #define END_C_DECLS /* empty */ #endif /** * The attribute definition should be included before any potential * usage. */ #if OPAL_HAVE_ATTRIBUTE_ALIGNED # define __opal_attribute_aligned__(a) __attribute__((__aligned__(a))) # define __opal_attribute_aligned_max__ __attribute__((__aligned__)) #else # define __opal_attribute_aligned__(a) # define __opal_attribute_aligned_max__ #endif #if OPAL_HAVE_ATTRIBUTE_ALWAYS_INLINE # define __opal_attribute_always_inline__ __attribute__((__always_inline__)) #else # define __opal_attribute_always_inline__ #endif #if OPAL_HAVE_ATTRIBUTE_COLD # define __opal_attribute_cold__ __attribute__((__cold__)) #else # define __opal_attribute_cold__ #endif #if OPAL_HAVE_ATTRIBUTE_CONST # define __opal_attribute_const__ __attribute__((__const__)) #else # define __opal_attribute_const__ #endif #if OPAL_HAVE_ATTRIBUTE_DEPRECATED # define __opal_attribute_deprecated__ __attribute__((__deprecated__)) #else # define __opal_attribute_deprecated__ #endif #if OPAL_HAVE_ATTRIBUTE_FORMAT # define __opal_attribute_format__(a,b,c) __attribute__((__format__(a, b, c))) #else # define __opal_attribute_format__(a,b,c) #endif /* Use this __atribute__ on function-ptr declarations, only */ #if OPAL_HAVE_ATTRIBUTE_FORMAT_FUNCPTR # define __opal_attribute_format_funcptr__(a,b,c) __attribute__((__format__(a, b, c))) #else # define __opal_attribute_format_funcptr__(a,b,c) #endif #if OPAL_HAVE_ATTRIBUTE_HOT # define __opal_attribute_hot__ __attribute__((__hot__)) #else # define __opal_attribute_hot__ #endif #if OPAL_HAVE_ATTRIBUTE_MALLOC # define __opal_attribute_malloc__ __attribute__((__malloc__)) #else # define __opal_attribute_malloc__ #endif #if OPAL_HAVE_ATTRIBUTE_MAY_ALIAS # define __opal_attribute_may_alias__ __attribute__((__may_alias__)) #else # define __opal_attribute_may_alias__ #endif #if OPAL_HAVE_ATTRIBUTE_NO_INSTRUMENT_FUNCTION # define __opal_attribute_no_instrument_function__ __attribute__((__no_instrument_function__)) #else # define __opal_attribute_no_instrument_function__ #endif #if OPAL_HAVE_ATTRIBUTE_NOINLINE # define __opal_attribute_noinline__ __attribute__((__noinline__)) #else # define __opal_attribute_noinline__ #endif #if OPAL_HAVE_ATTRIBUTE_NONNULL # define __opal_attribute_nonnull__(a) __attribute__((__nonnull__(a))) # define __opal_attribute_nonnull_all__ __attribute__((__nonnull__)) #else # define __opal_attribute_nonnull__(a) # define __opal_attribute_nonnull_all__ #endif #if OPAL_HAVE_ATTRIBUTE_NORETURN # define __opal_attribute_noreturn__ __attribute__((__noreturn__)) #else # define __opal_attribute_noreturn__ #endif /* Use this __atribute__ on function-ptr declarations, only */ #if OPAL_HAVE_ATTRIBUTE_NORETURN_FUNCPTR # define __opal_attribute_noreturn_funcptr__ __attribute__((__noreturn__)) #else # define __opal_attribute_noreturn_funcptr__ #endif #if OPAL_HAVE_ATTRIBUTE_PACKED # define __opal_attribute_packed__ __attribute__((__packed__)) #else # define __opal_attribute_packed__ #endif #if OPAL_HAVE_ATTRIBUTE_PURE # define __opal_attribute_pure__ __attribute__((__pure__)) #else # define __opal_attribute_pure__ #endif #if OPAL_HAVE_ATTRIBUTE_SENTINEL # define __opal_attribute_sentinel__ __attribute__((__sentinel__)) #else # define __opal_attribute_sentinel__ #endif #if OPAL_HAVE_ATTRIBUTE_UNUSED # define __opal_attribute_unused__ __attribute__((__unused__)) #else # define __opal_attribute_unused__ #endif #if OPAL_HAVE_ATTRIBUTE_VISIBILITY # define __opal_attribute_visibility__(a) __attribute__((__visibility__(a))) #else # define __opal_attribute_visibility__(a) #endif #if OPAL_HAVE_ATTRIBUTE_WARN_UNUSED_RESULT # define __opal_attribute_warn_unused_result__ __attribute__((__warn_unused_result__)) #else # define __opal_attribute_warn_unused_result__ #endif #if OPAL_HAVE_ATTRIBUTE_WEAK_ALIAS # define __opal_attribute_weak_alias__(a) __attribute__((__weak__, __alias__(a))) #else # define __opal_attribute_weak_alias__(a) #endif #if OPAL_HAVE_ATTRIBUTE_DESTRUCTOR # define __opal_attribute_destructor__ __attribute__((__destructor__)) #else # define __opal_attribute_destructor__ #endif # if OPAL_C_HAVE_VISIBILITY # define OPAL_DECLSPEC __opal_attribute_visibility__("default") # define OPAL_MODULE_DECLSPEC __opal_attribute_visibility__("default") # else # define OPAL_DECLSPEC # define OPAL_MODULE_DECLSPEC # endif /* * Do we have ? */ #ifdef HAVE_STDINT_H #if !defined(__STDC_LIMIT_MACROS) && (defined(c_plusplus) || defined (__cplusplus)) /* When using a C++ compiler, the max / min value #defines for std types are only included if __STDC_LIMIT_MACROS is set before including stdint.h */ #define __STDC_LIMIT_MACROS #endif #include "opal_config.h" #include #else #include "opal_stdint.h" #endif /*********************************************************************** * * Code that is only for when building Open MPI or utilities that are * using the internals of Open MPI. It should not be included when * building MPI applications * **********************************************************************/ #if OMPI_BUILDING #ifndef HAVE_PTRDIFF_T typedef OPAL_PTRDIFF_TYPE ptrdiff_t; #endif /* * If we're in C, we may need to bring in the bool type and true/false * constants. OPAL_NEED_C_BOOL will be true if the compiler either * needs or doesn't define the bool type at all. */ #if !(defined(c_plusplus) || defined(__cplusplus)) # if OPAL_NEED_C_BOOL # if OPAL_USE_STDBOOL_H /* If we're using , there is an implicit assumption that the C++ bool is the same size and has the same alignment. However, configure may have disabled the MPI C++ bindings, so if "_Bool" exists, then use that sizeof. */ # include /* This section exists because AC_SIZEOF(bool) may not be run in configure if we're not building the MPI C++ bindings. */ # undef SIZEOF_BOOL # if SIZEOF__BOOL > 0 # define SIZEOF_BOOL SIZEOF__BOOL # else /* If all else fails, assume it's 1 */ # define SIZEOF_BOOL 1 # endif # else /* We need to create a bool type and ensure that it's the same size / alignment as the C++ bool size / alignment */ # define false 0 # define true 1 # if SIZEOF_BOOL == SIZEOF_CHAR && OPAL_ALIGNMENT_CXX_BOOL == OPAL_ALIGNMENT_CHAR typedef unsigned char bool; # elif SIZEOF_BOOL == SIZEOF_SHORT && OPAL_ALIGNMENT_CXX_BOOL == OPAL_ALIGNMENT_SHORT typedef short bool; # elif SIZEOF_BOOL == SIZEOF_INT && OPAL_ALIGNMENT_CXX_BOOL == OPAL_ALIGNMENT_INT typedef int bool; # elif SIZEOF_BOOL == SIZEOF_LONG && OPAL_ALIGNMENT_CXX_BOOL == OPAL_ALIGNMENT_LONG typedef long bool; # elif defined(SIZEOF_LONG_LONG) && defined(OPAL_ALIGNMENT_LONG) && SIZEOF_BOOL == SIZEOF_LONG && OPAL_ALIGNMENT_CXX_BOOL == OPAL_ALIGNMENT_LONG typedef long long bool; /* If we have _Bool, use that */ # elif SIZEOF__BOOL > 0 # undef SIZEOF_BOOL # define bool _Bool # define SIZEOF_BOOL SIZEOF__BOOL # else /* If all else fails, just make bool be an unsigned char and size of 1 */ typedef unsigned char bool; # define SIZEOF_BOOL 1 # endif # endif /* OPAL_USE_STDBOOL_H */ # endif /* OPAL_NEED_C_BOOL */ #endif /* * Maximum size of a filename path. */ #include #ifdef HAVE_SYS_PARAM_H #include #endif #if defined(PATH_MAX) #define OPAL_PATH_MAX (PATH_MAX + 1) #elif defined(_POSIX_PATH_MAX) #define OPAL_PATH_MAX (_POSIX_PATH_MAX + 1) #else #define OPAL_PATH_MAX 256 #endif /* * Set the compile-time path-separator on this system and variable separator */ #define OPAL_PATH_SEP "/" #define OPAL_ENV_SEP ':' /* * Do we want memory debugging? * * A few scenarios: * * 1. In the OMPI C library: we want these defines in all cases * 2. In the OMPI C++ bindings: we do not want them * 3. In the OMPI C++ executables: we do want them * * So for 1, everyone must include first. For 2, the * C++ bindings will never include -- they will only * include , which includes , but after * setting OMPI_BUILDING to 0 For 3, it's the same as 1 -- just include * first. * * Give code that needs to include opal_config.h but really can't have * this stuff enabled (like the memory manager code) a way to turn us * off */ #if OPAL_ENABLE_MEM_DEBUG && !defined(OPAL_DISABLE_ENABLE_MEM_DEBUG) /* It is safe to include opal/util/malloc.h here because a) it will only happen when we are building OMPI and therefore have a full OMPI source tree [including headers] available, and b) we guaranteed to *not* to include anything else via opal/util/malloc.h, so we won't have Cascading Includes Of Death. */ # include "opal/util/malloc.h" # if defined(malloc) # undef malloc # endif # define malloc(size) opal_malloc((size), __FILE__, __LINE__) # if defined(calloc) # undef calloc # endif # define calloc(nmembers, size) opal_calloc((nmembers), (size), __FILE__, __LINE__) # if defined(realloc) # undef realloc # endif # define realloc(ptr, size) opal_realloc((ptr), (size), __FILE__, __LINE__) # if defined(free) # undef free # endif # define free(ptr) opal_free((ptr), __FILE__, __LINE__) /* * If we're mem debugging, make the OPAL_DEBUG_ZERO resolve to memset */ # include # define OPAL_DEBUG_ZERO(obj) memset(&(obj), 0, sizeof(obj)) #else # define OPAL_DEBUG_ZERO(obj) #endif /* * printf functions for portability (only when building Open MPI) */ #if !defined(HAVE_VASPRINTF) || !defined(HAVE_VSNPRINTF) #include #include #endif #if !defined(HAVE_ASPRINTF) || !defined(HAVE_SNPRINTF) || !defined(HAVE_VASPRINTF) || !defined(HAVE_VSNPRINTF) #include "opal/util/printf.h" #endif #ifndef HAVE_ASPRINTF # define asprintf opal_asprintf #endif #ifndef HAVE_SNPRINTF # define snprintf opal_snprintf #endif #ifndef HAVE_VASPRINTF # define vasprintf opal_vasprintf #endif #ifndef HAVE_VSNPRINTF # define vsnprintf opal_vsnprintf #endif /* * Some platforms (Solaris) have a broken qsort implementation. Work * around by using our own. */ #if OPAL_HAVE_BROKEN_QSORT #ifdef qsort #undef qsort #endif #include "opal/util/qsort.h" #define qsort opal_qsort #endif /* * On some homogenous big-iron machines (Sandia's Red Storm), there * are no htonl and friends. If that's the case, provide stubs. I * would hope we never find a platform that doesn't have these macros * and would want to talk to the outside world... On other platforms * we fail to detect them correctly. */ #if !defined(HAVE_UNIX_BYTESWAP) static inline uint32_t htonl(uint32_t hostvar) { return hostvar; } static inline uint32_t ntohl(uint32_t netvar) { return netvar; } static inline uint16_t htons(uint16_t hostvar) { return hostvar; } static inline uint16_t ntohs(uint16_t netvar) { return netvar; } #endif /* * Define __func__-preprocessor directive if the compiler does not * already define it. Define it to __FILE__ so that we at least have * a clue where the developer is trying to indicate where the error is * coming from (assuming that __func__ is typically used for * printf-style debugging). */ #if defined(HAVE_DECL___FUNC__) && !HAVE_DECL___FUNC__ #define __func__ __FILE__ #endif #define IOVBASE_TYPE void /** * If we generate our own bool type, we need a special way to cast the result * in such a way to keep the compilers silent. */ # define OPAL_INT_TO_BOOL(VALUE) (bool)(VALUE) /** * Top level define to check 2 things: a) if we want ipv6 support, and * b) the underlying system supports ipv6. Having one #define for * this makes it simpler to check throughout the code base. */ #if OPAL_ENABLE_IPV6 && defined(HAVE_STRUCT_SOCKADDR_IN6) #define OPAL_ENABLE_IPV6 1 #else #define OPAL_ENABLE_IPV6 0 #endif #if !defined(HAVE_STRUCT_SOCKADDR_STORAGE) && defined(HAVE_STRUCT_SOCKADDR_IN) #define sockaddr_storage sockaddr #define ss_family sa_family #endif /* Compatibility structure so that we don't have to have as many #if checks in the code base */ #if !defined(HAVE_STRUCT_SOCKADDR_IN6) && defined(HAVE_STRUCT_SOCKADDR_IN) #define sockaddr_in6 sockaddr_in #define sin6_len sin_len #define sin6_family sin_family #define sin6_port sin_port #define sin6_addr sin_addr #endif #if !HAVE_DECL_AF_UNSPEC #define AF_UNSPEC 0 #endif #if !HAVE_DECL_PF_UNSPEC #define PF_UNSPEC 0 #endif #if !HAVE_DECL_AF_INET6 #define AF_INET6 AF_UNSPEC #endif #if !HAVE_DECL_PF_INET6 #define PF_INET6 PF_UNSPEC #endif #if defined(__APPLE__) && defined(HAVE_INTTYPES_H) /* Prior to Mac OS X 10.3, the length modifier "ll" wasn't supported, but "q" was for long long. This isn't ANSI C and causes a warning when using PRI?64 macros. We don't support versions prior to OS X 10.3, so we dont' need such backward compatibility. Instead, redefine the macros to be "ll", which is ANSI C and doesn't cause a compiler warning. */ #include #if defined(__PRI_64_LENGTH_MODIFIER__) #undef __PRI_64_LENGTH_MODIFIER__ #define __PRI_64_LENGTH_MODIFIER__ "ll" #endif #if defined(__SCN_64_LENGTH_MODIFIER__) #undef __SCN_64_LENGTH_MODIFIER__ #define __SCN_64_LENGTH_MODIFIER__ "ll" #endif #endif #ifdef MCS_VXWORKS /* VXWorks puts some common functions in oddly named headers. Rather than update all the places the functions are used, which would be a maintenance disatster, just update here... */ #ifdef HAVE_IOLIB_H /* pipe(), ioctl() */ #include #endif #ifdef HAVE_SOCKLIB_H /* socket() */ #include #endif #ifdef HAVE_HOSTLIB_H /* gethostname() */ #include #ifndef MAXHOSTNAMELEN #define MAXHOSTNAMELEN 64 #endif #endif #endif /* If we're in C++, then just undefine restrict and then define it to nothing. "restrict" is not part of the C++ language, and we don't have a corresponding AC_CXX_RESTRICT to figure out what the C++ compiler supports. */ #if defined(c_plusplus) || defined(__cplusplus) #undef restrict #define restrict #endif #else /* For a similar reason to what is listed in opal_config_top.h, we want to protect others from the autoconf/automake-generated PACKAGE_ macros in opal_config.h. We can't put these undef's directly in opal_config.h because they'll be turned into #defines' via autoconf. So put them here in case any only else includes OMPI/ORTE/OPAL's config.h files. */ #undef PACKAGE_BUGREPORT #undef PACKAGE_NAME #undef PACKAGE_STRING #undef PACKAGE_TARNAME #undef PACKAGE_VERSION #undef PACKAGE_URL #undef HAVE_CONFIG_H #endif /* OMPI_BUILDING */