/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */ /* * Copyright (c) 2004-2005 The Trustees of Indiana University. * All rights reserved. * Copyright (c) 2004-2006 The Trustees of the University of Tennessee. * All rights reserved. * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, * University of Stuttgart. All rights reserved. * Copyright (c) 2004-2005 The Regents of the University of California. * All rights reserved. * Copyright (c) 2007-2015 Los Alamos National Security, LLC. All rights * reserved. * Copyright (c) 2010 Cisco Systems, Inc. All rights reserved. * Copyright (c) 2012-2013 Sandia National Laboratories. All rights reserved. * Copyright (c) 2015 Research Organization for Information Science * and Technology (RIST). All rights reserved. * $COPYRIGHT$ * * Additional copyrights may follow * * $HEADER$ */ #ifndef OMPI_OSC_PT2PT_H #define OMPI_OSC_PT2PT_H #include "ompi_config.h" #include "opal/class/opal_list.h" #include "opal/class/opal_free_list.h" #include "opal/class/opal_hash_table.h" #include "opal/threads/threads.h" #include "opal/util/output.h" #include "ompi/win/win.h" #include "ompi/info/info.h" #include "ompi/communicator/communicator.h" #include "ompi/datatype/ompi_datatype.h" #include "ompi/request/request.h" #include "ompi/mca/osc/osc.h" #include "ompi/mca/osc/base/base.h" #include "ompi/memchecker.h" #include "osc_pt2pt_header.h" #include "osc_pt2pt_sync.h" BEGIN_C_DECLS struct ompi_osc_pt2pt_frag_t; struct ompi_osc_pt2pt_component_t { /** Extend the basic osc component interface */ ompi_osc_base_component_t super; /** lock access to modules */ opal_mutex_t lock; /** cid -> module mapping */ opal_hash_table_t modules; /** module count */ int module_count; /** free list of ompi_osc_pt2pt_frag_t structures */ opal_free_list_t frags; /** Free list of requests */ opal_free_list_t requests; /** PT2PT component buffer size */ unsigned int buffer_size; /** Lock for pending_operations */ opal_mutex_t pending_operations_lock; /** List of operations that need to be processed */ opal_list_t pending_operations; /** Is the progress function enabled? */ bool progress_enable; }; typedef struct ompi_osc_pt2pt_component_t ompi_osc_pt2pt_component_t; struct ompi_osc_pt2pt_peer_t { /** make this an opal object */ opal_object_t super; /** rank of this peer */ int rank; /** pointer to the current send fragment for each outgoing target */ struct ompi_osc_pt2pt_frag_t *active_frag; /** lock for this peer */ opal_mutex_t lock; /** fragments queued to this target */ opal_list_t queued_frags; /** number of fragments incomming (negative - expected, positive - unsynchronized) */ int32_t passive_incoming_frag_count; /** unexpected post message arrived */ bool unexpected_post; }; typedef struct ompi_osc_pt2pt_peer_t ompi_osc_pt2pt_peer_t; OBJ_CLASS_DECLARATION(ompi_osc_pt2pt_peer_t); /** Module structure. Exactly one of these is associated with each PT2PT window */ struct ompi_osc_pt2pt_module_t { /** Extend the basic osc module interface */ ompi_osc_base_module_t super; /** window should have accumulate ordering... */ bool accumulate_ordering; /** no locks info key value */ bool no_locks; /** pointer to free on cleanup (may be NULL) */ void *free_after; /** Base pointer for local window */ void *baseptr; /** communicator created with this window. This is the cid used in the component's modules mapping. */ ompi_communicator_t *comm; /** Local displacement unit. */ int disp_unit; /** Mutex lock protecting module data */ opal_mutex_t lock; /** condition variable associated with lock */ opal_condition_t cond; /** hash table of peer objects */ opal_hash_table_t peer_hash; /** lock protecting peer_hash */ opal_mutex_t peer_lock; /** Nmber of communication fragments started for this epoch, by peer. Not in peer data to make fence more manageable. */ uint32_t *epoch_outgoing_frag_count; /** cyclic counter for a unique tage for long messages. */ unsigned int tag_counter; /* Number of outgoing fragments that have completed since the begining of time */ uint32_t outgoing_frag_count; /* Next outgoing fragment count at which we want a signal on cond */ uint32_t outgoing_frag_signal_count; /* Number of incoming fragments that have completed since the begining of time */ uint32_t active_incoming_frag_count; /* Next incoming buffer count at which we want a signal on cond */ uint32_t active_incoming_frag_signal_count; /** Number of targets locked/being locked */ unsigned int passive_target_access_epoch; /** Indicates the window is in a pcsw or all access (fence, lock_all) epoch */ ompi_osc_pt2pt_sync_t all_sync; /* ********************* PWSC data ************************ */ struct ompi_group_t *pw_group; /** Number of "count" messages from the remote complete group we've received */ int32_t num_complete_msgs; /* ********************* LOCK data ************************ */ /** Status of the local window lock. One of 0 (unlocked), MPI_LOCK_EXCLUSIVE, or MPI_LOCK_SHARED. */ int32_t lock_status; /** lock for locks_pending list */ opal_mutex_t locks_pending_lock; /** target side list of lock requests we couldn't satisfy yet */ opal_list_t locks_pending; /** origin side list of locks currently outstanding */ opal_hash_table_t outstanding_locks; unsigned char *incoming_buffer; ompi_request_t *frag_request; /* enforce accumulate semantics */ opal_atomic_lock_t accumulate_lock; opal_list_t pending_acc; /** Lock for garbage collection lists */ opal_mutex_t gc_lock; /** List of requests that need to be freed */ opal_list_t request_gc; /** List of buffers that need to be freed */ opal_list_t buffer_gc; }; typedef struct ompi_osc_pt2pt_module_t ompi_osc_pt2pt_module_t; OMPI_MODULE_DECLSPEC extern ompi_osc_pt2pt_component_t mca_osc_pt2pt_component; static inline ompi_osc_pt2pt_peer_t *ompi_osc_pt2pt_peer_lookup (ompi_osc_pt2pt_module_t *module, int rank) { ompi_osc_pt2pt_peer_t *peer = NULL; (void) opal_hash_table_get_value_uint32 (&module->peer_hash, rank, (void **) &peer); if (OPAL_UNLIKELY(NULL == peer)) { OPAL_THREAD_LOCK(&module->peer_lock); (void) opal_hash_table_get_value_uint32 (&module->peer_hash, rank, (void **) &peer); if (NULL == peer) { peer = OBJ_NEW(ompi_osc_pt2pt_peer_t); peer->rank = rank; (void) opal_hash_table_set_value_uint32 (&module->peer_hash, rank, (void *) peer); } OPAL_THREAD_UNLOCK(&module->peer_lock); } return peer; } struct ompi_osc_pt2pt_pending_t { opal_list_item_t super; ompi_osc_pt2pt_module_t *module; int source; ompi_osc_pt2pt_header_t header; }; typedef struct ompi_osc_pt2pt_pending_t ompi_osc_pt2pt_pending_t; OBJ_CLASS_DECLARATION(ompi_osc_pt2pt_pending_t); #define GET_MODULE(win) ((ompi_osc_pt2pt_module_t*) win->w_osc_module) extern bool ompi_osc_pt2pt_no_locks; int ompi_osc_pt2pt_attach(struct ompi_win_t *win, void *base, size_t len); int ompi_osc_pt2pt_detach(struct ompi_win_t *win, const void *base); int ompi_osc_pt2pt_free(struct ompi_win_t *win); int ompi_osc_pt2pt_put(const void *origin_addr, int origin_count, struct ompi_datatype_t *origin_dt, int target, OPAL_PTRDIFF_TYPE target_disp, int target_count, struct ompi_datatype_t *target_dt, struct ompi_win_t *win); int ompi_osc_pt2pt_accumulate(const void *origin_addr, int origin_count, struct ompi_datatype_t *origin_dt, int target, OPAL_PTRDIFF_TYPE target_disp, int target_count, struct ompi_datatype_t *target_dt, struct ompi_op_t *op, struct ompi_win_t *win); int ompi_osc_pt2pt_get(void *origin_addr, int origin_count, struct ompi_datatype_t *origin_dt, int target, OPAL_PTRDIFF_TYPE target_disp, int target_count, struct ompi_datatype_t *target_dt, struct ompi_win_t *win); int ompi_osc_pt2pt_compare_and_swap(const void *origin_addr, const void *compare_addr, void *result_addr, struct ompi_datatype_t *dt, int target, OPAL_PTRDIFF_TYPE target_disp, struct ompi_win_t *win); int ompi_osc_pt2pt_fetch_and_op(const void *origin_addr, void *result_addr, struct ompi_datatype_t *dt, int target, OPAL_PTRDIFF_TYPE target_disp, struct ompi_op_t *op, struct ompi_win_t *win); int ompi_osc_pt2pt_get_accumulate(const void *origin_addr, int origin_count, struct ompi_datatype_t *origin_datatype, void *result_addr, int result_count, struct ompi_datatype_t *result_datatype, int target_rank, MPI_Aint target_disp, int target_count, struct ompi_datatype_t *target_datatype, struct ompi_op_t *op, struct ompi_win_t *win); int ompi_osc_pt2pt_rput(const void *origin_addr, int origin_count, struct ompi_datatype_t *origin_dt, int target, OPAL_PTRDIFF_TYPE target_disp, int target_count, struct ompi_datatype_t *target_dt, struct ompi_win_t *win, struct ompi_request_t **request); int ompi_osc_pt2pt_rget(void *origin_addr, int origin_count, struct ompi_datatype_t *origin_dt, int target, OPAL_PTRDIFF_TYPE target_disp, int target_count, struct ompi_datatype_t *target_dt, struct ompi_win_t *win, struct ompi_request_t **request); int ompi_osc_pt2pt_raccumulate(const void *origin_addr, int origin_count, struct ompi_datatype_t *origin_dt, int target, OPAL_PTRDIFF_TYPE target_disp, int target_count, struct ompi_datatype_t *target_dt, struct ompi_op_t *op, struct ompi_win_t *win, struct ompi_request_t **request); int ompi_osc_pt2pt_rget_accumulate(const void *origin_addr, int origin_count, struct ompi_datatype_t *origin_datatype, void *result_addr, int result_count, struct ompi_datatype_t *result_datatype, int target_rank, MPI_Aint target_disp, int target_count, struct ompi_datatype_t *target_datatype, struct ompi_op_t *op, struct ompi_win_t *win, struct ompi_request_t **request); int ompi_osc_pt2pt_fence(int assert, struct ompi_win_t *win); /* received a post message */ void osc_pt2pt_incoming_post (ompi_osc_pt2pt_module_t *module, int source); /* received a complete message */ void osc_pt2pt_incoming_complete (ompi_osc_pt2pt_module_t *module, int source, int frag_count); int ompi_osc_pt2pt_start(struct ompi_group_t *group, int assert, struct ompi_win_t *win); int ompi_osc_pt2pt_complete(struct ompi_win_t *win); int ompi_osc_pt2pt_post(struct ompi_group_t *group, int assert, struct ompi_win_t *win); int ompi_osc_pt2pt_wait(struct ompi_win_t *win); int ompi_osc_pt2pt_test(struct ompi_win_t *win, int *flag); int ompi_osc_pt2pt_lock(int lock_type, int target, int assert, struct ompi_win_t *win); int ompi_osc_pt2pt_unlock(int target, struct ompi_win_t *win); int ompi_osc_pt2pt_lock_all(int assert, struct ompi_win_t *win); int ompi_osc_pt2pt_unlock_all(struct ompi_win_t *win); int ompi_osc_pt2pt_sync(struct ompi_win_t *win); int ompi_osc_pt2pt_flush(int target, struct ompi_win_t *win); int ompi_osc_pt2pt_flush_all(struct ompi_win_t *win); int ompi_osc_pt2pt_flush_local(int target, struct ompi_win_t *win); int ompi_osc_pt2pt_flush_local_all(struct ompi_win_t *win); int ompi_osc_pt2pt_set_info(struct ompi_win_t *win, struct ompi_info_t *info); int ompi_osc_pt2pt_get_info(struct ompi_win_t *win, struct ompi_info_t **info_used); int ompi_osc_pt2pt_component_irecv(ompi_osc_pt2pt_module_t *module, void *buf, size_t count, struct ompi_datatype_t *datatype, int src, int tag, struct ompi_communicator_t *comm); int ompi_osc_pt2pt_component_isend(ompi_osc_pt2pt_module_t *module, const void *buf, size_t count, struct ompi_datatype_t *datatype, int dest, int tag, struct ompi_communicator_t *comm); /** * ompi_osc_pt2pt_progress_pending_acc: * * @short Progress one pending accumulation or compare and swap operation. * * @param[in] module - OSC PT2PT module * * @long If the accumulation lock can be aquired progress one pending * accumulate or compare and swap operation. */ int ompi_osc_pt2pt_progress_pending_acc (ompi_osc_pt2pt_module_t *module); /** * mark_incoming_completion: * * @short Increment incoming completeion count. * * @param[in] module - OSC PT2PT module * @param[in] source - Passive target source or MPI_PROC_NULL (active target) * * @long This function incremements either the passive or active incoming counts. * If the count reaches the signal count we signal the module's condition. * This function uses atomics if necessary so it is not necessary to hold * the module lock before calling this function. */ static inline void mark_incoming_completion (ompi_osc_pt2pt_module_t *module, int source) { if (MPI_PROC_NULL == source) { OPAL_OUTPUT_VERBOSE((50, ompi_osc_base_framework.framework_output, "mark_incoming_completion marking active incoming complete. count = %d. signal = %d", (int) module->active_incoming_frag_count + 1, module->active_incoming_frag_signal_count)); OPAL_THREAD_ADD32((int32_t *) &module->active_incoming_frag_count, 1); if (module->active_incoming_frag_count >= module->active_incoming_frag_signal_count) { opal_condition_broadcast(&module->cond); } } else { ompi_osc_pt2pt_peer_t *peer = ompi_osc_pt2pt_peer_lookup (module, source); OPAL_OUTPUT_VERBOSE((50, ompi_osc_base_framework.framework_output, "mark_incoming_completion marking passive incoming complete. source = %d, count = %d", source, (int) peer->passive_incoming_frag_count + 1)); OPAL_THREAD_ADD32((int32_t *) &peer->passive_incoming_frag_count, 1); if (0 == peer->passive_incoming_frag_count) { opal_condition_broadcast(&module->cond); } } } /** * mark_outgoing_completion: * * @short Increment outgoing count. * * @param[in] module - OSC PT2PT module * * @long This function is used to signal that an outgoing send is complete. It * incrememnts only the outgoing fragment count and signals the module * condition the fragment count is >= the signal count. This function * uses atomics if necessary so it is not necessary to hold the module * lock before calling this function. */ static inline void mark_outgoing_completion (ompi_osc_pt2pt_module_t *module) { OPAL_THREAD_ADD32((int32_t *) &module->outgoing_frag_count, 1); if (module->outgoing_frag_count >= module->outgoing_frag_signal_count) { opal_condition_broadcast(&module->cond); } } /** * ompi_osc_signal_outgoing: * * @short Increment outgoing signal counters. * * @param[in] module - OSC PT2PT module * @param[in] target - Passive target rank or MPI_PROC_NULL (active target) * @param[in] count - Number of outgoing messages to signal. * * @long This function uses atomics if necessary so it is not necessary to hold * the module lock before calling this function. */ static inline void ompi_osc_signal_outgoing (ompi_osc_pt2pt_module_t *module, int target, int count) { OPAL_THREAD_ADD32((int32_t *) &module->outgoing_frag_signal_count, count); if (MPI_PROC_NULL != target) { OPAL_OUTPUT_VERBOSE((50, ompi_osc_base_framework.framework_output, "ompi_osc_signal_outgoing_passive: target = %d, count = %d, total = %d", target, count, module->epoch_outgoing_frag_count[target] + count)); OPAL_THREAD_ADD32((int32_t *) (module->epoch_outgoing_frag_count + target), count); } } /** * osc_pt2pt_copy_on_recv: * * @short Helper function. Copies data from source to target through the * convertor. * * @param[in] target - destination for the data * @param[in] source - packed data * @param[in] source_len - length of source buffer * @param[in] proc - proc that packed the source data * @param[in] count - count of datatype items * @param[in] datatype - datatype used for unpacking * * @long This functions unpacks data from the source buffer into the target * buffer. The copy is done with a convertor generated from proc, * datatype, and count. */ static inline void osc_pt2pt_copy_on_recv (void *target, void *source, size_t source_len, ompi_proc_t *proc, int count, ompi_datatype_t *datatype) { opal_convertor_t convertor; uint32_t iov_count = 1; struct iovec iov; size_t max_data; /* create convertor */ OBJ_CONSTRUCT(&convertor, opal_convertor_t); /* initialize convertor */ opal_convertor_copy_and_prepare_for_recv(proc->super.proc_convertor, &datatype->super, count, target, 0, &convertor); iov.iov_len = source_len; iov.iov_base = (IOVBASE_TYPE *) source; max_data = iov.iov_len; MEMCHECKER(memchecker_convertor_call(&opal_memchecker_base_mem_defined, &convertor)); opal_convertor_unpack (&convertor, &iov, &iov_count, &max_data); MEMCHECKER(memchecker_convertor_call(&opal_memchecker_base_mem_noaccess, &convertor)); OBJ_DESTRUCT(&convertor); } /** * osc_pt2pt_copy_for_send: * * @short: Helper function. Copies data from source to target through the * convertor. * * @param[in] target - destination for the packed data * @param[in] target_len - length of the target buffer * @param[in] source - original data * @param[in] proc - proc this data will be sent to * @param[in] count - count of datatype items * @param[in] datatype - datatype used for packing * * @long This functions packs data from the source buffer into the target * buffer. The copy is done with a convertor generated from proc, * datatype, and count. */ static inline void osc_pt2pt_copy_for_send (void *target, size_t target_len, const void *source, ompi_proc_t *proc, int count, ompi_datatype_t *datatype) { opal_convertor_t convertor; uint32_t iov_count = 1; struct iovec iov; size_t max_data; OBJ_CONSTRUCT(&convertor, opal_convertor_t); opal_convertor_copy_and_prepare_for_send(proc->super.proc_convertor, &datatype->super, count, source, 0, &convertor); iov.iov_len = target_len; iov.iov_base = (IOVBASE_TYPE *) target; opal_convertor_pack(&convertor, &iov, &iov_count, &max_data); OBJ_DESTRUCT(&convertor); } /** * osc_pt2pt_request_gc_clean: * * @short Release finished PML requests and accumulate buffers. * * @long This function exists because it is not possible to free a PML request * or buffer from a request completion callback. We instead put requests * and buffers on the module's garbage collection lists and release then * at a later time. */ static inline void osc_pt2pt_gc_clean (ompi_osc_pt2pt_module_t *module) { ompi_request_t *request; opal_list_item_t *item; OPAL_THREAD_LOCK(&module->gc_lock); while (NULL != (request = (ompi_request_t *) opal_list_remove_first (&module->request_gc))) { OPAL_THREAD_UNLOCK(&module->gc_lock); ompi_request_free (&request); OPAL_THREAD_LOCK(&module->gc_lock); } while (NULL != (item = opal_list_remove_first (&module->buffer_gc))) { OBJ_RELEASE(item); } OPAL_THREAD_UNLOCK(&module->gc_lock); } static inline void osc_pt2pt_gc_add_request (ompi_osc_pt2pt_module_t *module, ompi_request_t *request) { OPAL_THREAD_SCOPED_LOCK(&module->gc_lock, opal_list_append (&module->request_gc, (opal_list_item_t *) request)); } static inline void osc_pt2pt_gc_add_buffer (ompi_osc_pt2pt_module_t *module, opal_list_item_t *buffer) { OPAL_THREAD_SCOPED_LOCK(&module->gc_lock, opal_list_append (&module->buffer_gc, buffer)); } static inline void osc_pt2pt_add_pending (ompi_osc_pt2pt_pending_t *pending) { OPAL_THREAD_SCOPED_LOCK(&mca_osc_pt2pt_component.pending_operations_lock, opal_list_append (&mca_osc_pt2pt_component.pending_operations, &pending->super)); } #define OSC_PT2PT_FRAG_TAG 0x10000 #define OSC_PT2PT_FRAG_MASK 0x0ffff /** * get_tag: * * @short Get a send/recv tag for large memory operations. * * @param[in] module - OSC PT2PT module * * @long This function aquires a 16-bit tag for use with large memory operations. The * tag will be odd or even depending on if this is in a passive target access * or not. */ static inline int get_tag(ompi_osc_pt2pt_module_t *module) { /* the LSB of the tag is used be the receiver to determine if the message is a passive or active target (ie, where to mark completion). */ int tmp = module->tag_counter + !!(module->passive_target_access_epoch); module->tag_counter = (module->tag_counter + 2) & OSC_PT2PT_FRAG_MASK; return tmp; } /** * ompi_osc_pt2pt_accumulate_lock: * * @short Internal function that spins until the accumulation lock has * been aquired. * * @param[in] module - OSC PT2PT module * * @returns 0 * * @long This functions blocks until the accumulation lock has been aquired. This * behavior is only acceptable from a user-level call as blocking in a * callback may cause deadlock. If a callback needs the accumulate lock and * it is not available it should be placed on the pending_acc list of the * module. It will be released by ompi_osc_pt2pt_accumulate_unlock(). */ static inline int ompi_osc_pt2pt_accumulate_lock (ompi_osc_pt2pt_module_t *module) { while (opal_atomic_trylock (&module->accumulate_lock)) { opal_progress (); } return 0; } /** * ompi_osc_pt2pt_accumulate_trylock: * * @short Try to aquire the accumulation lock. * * @param[in] module - OSC PT2PT module * * @returns 0 if the accumulation lock was aquired * @returns 1 if the lock was not available * * @long This function will try to aquire the accumulation lock. This function * is safe to call from a callback. */ static inline int ompi_osc_pt2pt_accumulate_trylock (ompi_osc_pt2pt_module_t *module) { return opal_atomic_trylock (&module->accumulate_lock); } /** * @brief check if this process has this process is in a passive target access epoch * * @param[in] module osc pt2pt module */ static inline bool ompi_osc_pt2pt_in_passive_epoch (ompi_osc_pt2pt_module_t *module) { return 0 != module->passive_target_access_epoch; } /** * ompi_osc_pt2pt_accumulate_unlock: * * @short Unlock the accumulation lock and release a pending accumulation operation. * * @param[in] module - OSC PT2PT module * * @long This function unlocks the accumulation lock and release a single pending * accumulation operation if one exists. This function may be called recursively. */ static inline void ompi_osc_pt2pt_accumulate_unlock (ompi_osc_pt2pt_module_t *module) { opal_atomic_unlock (&module->accumulate_lock); if (0 != opal_list_get_size (&module->pending_acc)) { ompi_osc_pt2pt_progress_pending_acc (module); } } /** * Find the first outstanding lock of the target. * * @param[in] module osc pt2pt module * @param[in] target target rank * @param[out] peer peer object associated with the target * * @returns an outstanding lock on success * * This function looks for an outstanding lock to the target. If a lock exists it is returned. */ static inline ompi_osc_pt2pt_sync_t *ompi_osc_pt2pt_module_lock_find (ompi_osc_pt2pt_module_t *module, int target, ompi_osc_pt2pt_peer_t **peer) { ompi_osc_pt2pt_sync_t *outstanding_lock = NULL; (void) opal_hash_table_get_value_uint32 (&module->outstanding_locks, (uint32_t) target, (void **) &outstanding_lock); if (NULL != outstanding_lock && peer) { *peer = outstanding_lock->peer_list.peer; } return outstanding_lock; } /** * Add an outstanding lock * * @param[in] module osc pt2pt module * @param[in] lock lock object * * This function inserts a lock object to the list of outstanding locks. The caller must be holding the module * lock. */ static inline void ompi_osc_pt2pt_module_lock_insert (struct ompi_osc_pt2pt_module_t *module, ompi_osc_pt2pt_sync_t *lock) { (void) opal_hash_table_set_value_uint32 (&module->outstanding_locks, (uint32_t) lock->sync.lock.target, (void *) lock); } /** * Remove an outstanding lock * * @param[in] module osc pt2pt module * @param[in] lock lock object * * This function removes a lock object to the list of outstanding locks. The caller must be holding the module * lock. */ static inline void ompi_osc_pt2pt_module_lock_remove (struct ompi_osc_pt2pt_module_t *module, ompi_osc_pt2pt_sync_t *lock) { (void) opal_hash_table_remove_value_uint32 (&module->outstanding_locks, (uint32_t) lock->sync.lock.target); } /** * Lookup a synchronization object associated with the target * * @param[in] module osc pt2pt module * @param[in] target target rank * @param[out] peer peer object * * @returns NULL if the target is not locked, fenced, or part of a pscw sync * @returns synchronization object on success * * This function returns the synchronization object associated with an access epoch for * the target. If the target is not part of any current access epoch then NULL is returned. */ static inline ompi_osc_pt2pt_sync_t *ompi_osc_pt2pt_module_sync_lookup (ompi_osc_pt2pt_module_t *module, int target, struct ompi_osc_pt2pt_peer_t **peer) { OPAL_OUTPUT_VERBOSE((50, ompi_osc_base_framework.framework_output, "osc/pt2pt: looking for synchronization object for target %d", target)); switch (module->all_sync.type) { case OMPI_OSC_PT2PT_SYNC_TYPE_NONE: if (!module->no_locks) { return ompi_osc_pt2pt_module_lock_find (module, target, peer); } return NULL; case OMPI_OSC_PT2PT_SYNC_TYPE_FENCE: case OMPI_OSC_PT2PT_SYNC_TYPE_LOCK: OPAL_OUTPUT_VERBOSE((50, ompi_osc_base_framework.framework_output, "osc/pt2pt: found fence/lock_all access epoch for target %d", target)); /* fence epoch is now active */ module->all_sync.epoch_active = true; if (peer) { *peer = ompi_osc_pt2pt_peer_lookup (module, target); } return &module->all_sync; case OMPI_OSC_PT2PT_SYNC_TYPE_PSCW: if (ompi_osc_pt2pt_sync_pscw_peer (module, target, peer)) { OPAL_OUTPUT_VERBOSE((50, ompi_osc_base_framework.framework_output, "osc/pt2pt: found PSCW access epoch target for %d", target)); return &module->all_sync; } } return NULL; } /** * @brief check if an access epoch is active * * @param[in] module osc pt2pt module * * @returns true if any type of access epoch is active * @returns false otherwise * * This function is used to check for conflicting access epochs. */ static inline bool ompi_osc_pt2pt_access_epoch_active (ompi_osc_pt2pt_module_t *module) { return (module->all_sync.epoch_active || ompi_osc_pt2pt_in_passive_epoch (module)); } static inline bool ompi_osc_pt2pt_peer_sends_active (ompi_osc_pt2pt_module_t *module, int rank) { ompi_osc_pt2pt_sync_t *sync; sync = ompi_osc_pt2pt_module_sync_lookup (module, rank, NULL); if (!sync) { return false; } return sync->eager_send_active; } END_C_DECLS #endif /* OMPI_OSC_PT2PT_H */