dnl -*- shell-script -*- dnl dnl Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana dnl University Research and Technology dnl Corporation. All rights reserved. dnl Copyright (c) 2004-2005 The University of Tennessee and The University dnl of Tennessee Research Foundation. All rights dnl reserved. dnl Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, dnl University of Stuttgart. All rights reserved. dnl Copyright (c) 2004-2005 The Regents of the University of California. dnl All rights reserved. dnl Copyright (c) 2006-2010 Oracle and/or its affiliates. All rights reserved. dnl Copyright (c) 2009-2015 Cisco Systems, Inc. All rights reserved. dnl Copyright (c) 2015 Research Organization for Information Science dnl and Technology (RIST). All rights reserved. dnl $COPYRIGHT$ dnl dnl Additional copyrights may follow dnl dnl $HEADER$ dnl # OPAL_WRAPPER_FLAGS_ADD(variable, new_argument) # ---------------------------------------------- # Add new_argument to the list of arguments for variable in the # wrapper compilers, if it's not already there. For example: # OPAL_WRAPPER_FLAGS_ADD(CFLAGS, "-pthread") # will add -pthread to the list of CFLAGS the wrappers use when invoked. # # This macro MAY NOT be invoked from configure macros for MCA components. # See the comment in SETUP_WRAPPER_INIT (below) for more information. AC_DEFUN([OPAL_WRAPPER_FLAGS_ADD], [ m4_ifdef([mca_component_configure_active], [m4_fatal([OPAL_WRAPPER_FLAGS_ADD can not be called from a component configure])]) m4_if([$1], [CPPFLAGS], [OPAL_FLAGS_APPEND_UNIQ([wrapper_extra_cppflags], [$2])], [$1], [CFLAGS], [OPAL_FLAGS_APPEND_UNIQ([wrapper_extra_cflags], [$2])], [$1], [CXXFLAGS], [OPAL_FLAGS_APPEND_UNIQ([wrapper_extra_cxxflags], [$2])], [$1], [FCFLAGS], [OPAL_FLAGS_APPEND_UNIQ([wrapper_extra_fcflags], [$2])], [$1], [LDFLAGS], [OPAL_FLAGS_APPEND_UNIQ([wrapper_extra_ldflags], [$2])], [$1], [LIBS], [OPAL_FLAGS_APPEND_UNIQ([wrapper_extra_libs], [$2])], [m4_fatal([Unknown wrapper flag type $1])]) ]) # OPAL_SETUP_WRAPPER_INIT() # ------------------------- # Setup wrapper compiler configuration information. Should be called early to # prevent lots of calculations and then an abort for a silly user typo. This # macro works in pair with OPAL_SETUP_WRAPPER_FINAL, which should be called # almost at the end of configure (after the last call to OPAL_WRAPPER_FLAGS_ADD # and after the MCA system has been setup). # # The wrapper compiler arguments are a little fragile and should NOT # be edited by configure directly. Instead, main configure should use # OPAL_WRAPPER_FLAGS_ADD. # # When building statically, the MCA system will add # __WRAPPER_EXTRA_{LDFLAGS, LIBS} if set and try # to add __{LDFLAGS, LIBS} (if not an external # configure) to the wrapper LDFLAGS and LIBS. Any arguments in # __WRAPPER_EXTRA_CPPFLAGS are passed to the # wrapper compilers IF AND ONLY IF the framework was a STOP_AT_FIRST # framework, the component is a static component, and devel headers # are installed. Note that MCA components are ONLY allowed to # (indirectly) influence the wrapper CPPFLAGS, LDFLAGS, and LIBS. # That is, a component may not influence CFLAGS, CXXFLAGS, or FCFLAGS. # # Notes: # * Keep user flags seperate as 1) they should have no influence # over build and 2) they don't go through the uniqification we do # with the other wrapper compiler options # * While the user (the person who runs configure) is allowed to set # _prefix, configure is not. There's no known use case for # doing so, and we'd like to force the issue. AC_DEFUN([OPAL_SETUP_WRAPPER_INIT],[ AC_ARG_WITH([wrapper-cflags], [AC_HELP_STRING([--with-wrapper-cflags], [Extra flags to add to CFLAGS when using mpicc])]) AS_IF([test "$with_wrapper_cflags" = "yes" || test "$with_wrapper_cflags" = "no"], [AC_MSG_ERROR([--with-wrapper-cflags must have an argument.])]) AC_ARG_WITH([wrapper-cflags-prefix], [AC_HELP_STRING([--with-wrapper-cflags-prefix], [Extra flags (before user flags) to add to CFLAGS when using mpicc])]) AS_IF([test "$with_wrapper_cflags_prefix" = "yes" || test "$with_wrapper_cflags_prefix" = "no"], [AC_MSG_ERROR([--with-wrapper-cflags-prefix must have an argument.])]) AC_ARG_WITH([wrapper-cxxflags], [AC_HELP_STRING([--with-wrapper-cxxflags], [Extra flags to add to CXXFLAGS when using mpiCC/mpic++])]) AS_IF([test "$with_wrapper_cxxflags" = "yes" || test "$with_wrapper_cxxflags" = "no"], [AC_MSG_ERROR([--with-wrapper-cxxflags must have an argument.])]) AC_ARG_WITH([wrapper-cxxflags-prefix], [AC_HELP_STRING([--with-wrapper-cxxflags-prefix], [Extra flags to add to CXXFLAGS when using mpiCC/mpic++])]) AS_IF([test "$with_wrapper_cxxflags_prefix" = "yes" || test "$with_wrapper_cxxflags_prefix" = "no"], [AC_MSG_ERROR([--with-wrapper-cxxflags-prefix must have an argument.])]) m4_ifdef([project_ompi], [ AC_ARG_WITH([wrapper-fcflags], [AC_HELP_STRING([--with-wrapper-fcflags], [Extra flags to add to FCFLAGS when using mpifort])]) AS_IF([test "$with_wrapper_fcflags" = "yes" || test "$with_wrapper_fcflags" = "no"], [AC_MSG_ERROR([--with-wrapper-fcflags must have an argument.])]) AC_ARG_WITH([wrapper-fcflags-prefix], [AC_HELP_STRING([--with-wrapper-fcflags-prefix], [Extra flags (before user flags) to add to FCFLAGS when using mpifort])]) AS_IF([test "$with_wrapper_fcflags_prefix" = "yes" || test "$with_wrapper_fcflags_prefix" = "no"], [AC_MSG_ERROR([--with-wrapper-fcflags-prefix must have an argument.])])]) AC_ARG_WITH([wrapper-ldflags], [AC_HELP_STRING([--with-wrapper-ldflags], [Extra flags to add to LDFLAGS when using wrapper compilers])]) AS_IF([test "$with_wrapper_ldflags" = "yes" || test "$with_wrapper_ldflags" = "no"], [AC_MSG_ERROR([--with-wrapper-ldflags must have an argument.])]) AC_ARG_WITH([wrapper-libs], [AC_HELP_STRING([--with-wrapper-libs], [Extra flags to add to LIBS when using wrapper compilers])]) AS_IF([test "$with_wrapper_libs" = "yes" || test "$with_wrapper_libs" = "no"], [AC_MSG_ERROR([--with-wrapper-libs must have an argument.])]) AC_MSG_CHECKING([if want wrapper compiler rpath support]) AC_ARG_ENABLE([wrapper-rpath], [AS_HELP_STRING([--enable-wrapper-rpath], [enable rpath/runpath support in the wrapper compilers (default=yes)])]) AS_IF([test "$enable_wrapper_rpath" != "no"], [enable_wrapper_rpath=yes]) AC_MSG_RESULT([$enable_wrapper_rpath]) ]) # Check to see whether the linker supports DT_RPATH. We'll need to # use config.rpath to find the flags that it needs, if it does (see # comments in config.rpath for an explanation of where it came from). AC_DEFUN([OPAL_SETUP_RPATH],[ OPAL_VAR_SCOPE_PUSH([rpath_libdir_save rpath_script rpath_outfile]) AC_MSG_CHECKING([if linker supports RPATH]) # Output goes into globally-visible $rpath_args. Run this in a # sub-process so that we don't pollute the current process # environment. rpath_script=conftest.$$.sh rpath_outfile=conftest.$$.out rm -f $rpath_script $rpath_outfile cat > $rpath_script < $rpath_outfile chmod +x $rpath_outfile . ./$rpath_outfile rm -f $rpath_outfile # Evaluate \$hardcode_libdir_flag_spec, and substitute in LIBDIR for \$libdir libdir=LIBDIR flags="\`eval echo \$hardcode_libdir_flag_spec\`" echo \$flags # Done exit 0 EOF chmod +x $rpath_script rpath_args=`./$rpath_script` rm -f $rpath_script AS_IF([test -n "$rpath_args"], [WRAPPER_RPATH_SUPPORT=rpath AC_MSG_RESULT([yes ($rpath_args)])], [WRAPPER_RPATH_SUPPORT=unnecessary AC_MSG_RESULT([yes (no extra flags needed)])]) OPAL_VAR_SCOPE_POP # If we found RPATH support, check for RUNPATH support, too AS_IF([test "$WRAPPER_RPATH_SUPPORT" = "rpath"], [OPAL_SETUP_RUNPATH]) ]) # Check to see if the linker supports the DT_RUNPATH flags via # --enable-new-dtags (a GNU ld-specific option). These flags are more # social than DT_RPATH -- they can be overridden by LD_LIBRARY_PATH # (where a regular DT_RPATH cannot). # # If DT_RUNPATH is supported, then we'll use *both* the RPATH and # RUNPATH flags in the LDFLAGS. AC_DEFUN([OPAL_SETUP_RUNPATH],[ OPAL_VAR_SCOPE_PUSH([LDFLAGS_save]) AC_MSG_CHECKING([if linker supports RUNPATH]) # Set the output in $runpath_args runpath_args= LDFLAGS_save=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,--enable-new-dtags" AC_LANG_PUSH([C]) AC_LINK_IFELSE([AC_LANG_PROGRAM([], [return 7;])], [WRAPPER_RPATH_SUPPORT=runpath runpath_args="-Wl,--enable-new-dtags" AC_MSG_RESULT([yes (-Wl,--enable-new-dtags)])], [AC_MSG_RESULT([no])]) AC_LANG_POP([C]) LDFLAGS=$LDFLAGS_save OPAL_VAR_SCOPE_POP ]) # Called to find all -L arguments in the LDFLAGS and add in RPATH args # for each of them. Then also add in an RPATH for @{libdir} (which # will be replaced by the wrapper compile to the installdir libdir at # runtime), and the RUNPATH args, if we have them. AC_DEFUN([RPATHIFY_LDFLAGS],[ OPAL_VAR_SCOPE_PUSH([rpath_out rpath_dir rpath_tmp]) AS_IF([test "$enable_wrapper_rpath" = "yes" && test "$WRAPPER_RPATH_SUPPORT" != "disabled" && test "$WRAPPER_RPATH_SUPPORT" != "unnecessary"], [ rpath_out="" for val in ${$1}; do case $val in -L*) rpath_dir=`echo $val | cut -c3-` rpath_tmp=`echo $rpath_args | sed -e s@LIBDIR@$rpath_dir@` rpath_out="$rpath_out $rpath_tmp" ;; esac done # Now add in the RPATH args for @{libdir}, and the RUNPATH args rpath_tmp=`echo $rpath_args | sed -e s/LIBDIR/@{libdir}/` $1="${$1} $rpath_out $rpath_tmp $runpath_args" ]) OPAL_VAR_SCOPE_POP ]) dnl dnl Avoid some repetitive code below dnl AC_DEFUN([_OPAL_SETUP_WRAPPER_FINAL_PKGCONFIG],[ AC_MSG_CHECKING([for $1 pkg-config LDFLAGS]) $1_PKG_CONFIG_LDFLAGS=`echo "$$1_WRAPPER_EXTRA_LDFLAGS" | sed -e 's/@{libdir}/\${libdir}/g'` AC_SUBST([$1_PKG_CONFIG_LDFLAGS]) AC_MSG_RESULT([$$1_PKG_CONFIG_LDFLAGS]) ]) # OPAL_SETUP_WRAPPER_FINAL() # --------------------------- AC_DEFUN([OPAL_SETUP_WRAPPER_FINAL],[ # Setup RPATH support, if desired WRAPPER_RPATH_SUPPORT=disabled AS_IF([test "$enable_wrapper_rpath" = "yes"], [OPAL_SETUP_RPATH]) AS_IF([test "$enable_wrapper_rpath" = "yes" && test "$WRAPPER_RPATH_SUPPORT" = "disabled"], [AC_MSG_WARN([RPATH support requested but not available]) AC_MSG_ERROR([Cannot continue])]) # Note that we have to setup _PKG_CONFIG_LDFLAGS for the # pkg-config files to parallel the # _WRAPPER_EXTRA_LDFLAGS. This is because pkg-config # will not understand the @{libdir} notation in # *_WRAPPER_EXTRA_LDFLAGS; we have to translate it to ${libdir}. # We now have all relevant flags. Substitute them in everywhere. m4_ifdef([project_opal], [ AC_MSG_CHECKING([for OPAL CPPFLAGS]) if test "$WANT_INSTALL_HEADERS" = "1" ; then OPAL_WRAPPER_EXTRA_CPPFLAGS='-I${includedir}/openmpi' fi OPAL_WRAPPER_EXTRA_CPPFLAGS="$OPAL_WRAPPER_EXTRA_CPPFLAGS $opal_mca_wrapper_extra_cppflags $wrapper_extra_cppflags $with_wrapper_cppflags" AC_SUBST([OPAL_WRAPPER_EXTRA_CPPFLAGS]) AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_CPPFLAGS]) AC_MSG_CHECKING([for OPAL CFLAGS]) OPAL_WRAPPER_EXTRA_CFLAGS="$wrapper_extra_cflags $with_wrapper_cflags" AC_SUBST([OPAL_WRAPPER_EXTRA_CFLAGS]) AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_CFLAGS]) AC_MSG_CHECKING([for OPAL CFLAGS_PREFIX]) OPAL_WRAPPER_EXTRA_CFLAGS_PREFIX="$with_wrapper_cflags_prefix" AC_SUBST([OPAL_WRAPPER_EXTRA_CFLAGS_PREFIX]) AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_CFLAGS_PREFIX]) AC_MSG_CHECKING([for OPAL CXXFLAGS]) OPAL_WRAPPER_EXTRA_CXXFLAGS="$wrapper_extra_cxxflags $with_wrapper_cxxflags" AC_SUBST([OPAL_WRAPPER_EXTRA_CXXFLAGS]) AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_CXXFLAGS]) AC_MSG_CHECKING([for OPAL CXXFLAGS_PREFIX]) OPAL_WRAPPER_EXTRA_CXXFLAGS_PREFIX="$with_wrapper_cxxflags_prefix" AC_SUBST([OPAL_WRAPPER_EXTRA_CXXFLAGS_PREFIX]) AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_CXXFLAGS_PREFIX]) AC_MSG_CHECKING([for OPAL LDFLAGS]) OPAL_WRAPPER_EXTRA_LDFLAGS="$opal_mca_wrapper_extra_ldflags $wrapper_extra_ldflags $with_wrapper_ldflags" RPATHIFY_LDFLAGS([OPAL_WRAPPER_EXTRA_LDFLAGS]) AC_SUBST([OPAL_WRAPPER_EXTRA_LDFLAGS]) AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_LDFLAGS]) # Convert @{libdir} to ${libdir} for pkg-config _OPAL_SETUP_WRAPPER_FINAL_PKGCONFIG([OPAL]) # wrapper_extra_libs doesn't really get populated until after the mca system runs # since most of the libs come from libtool. So this is the first time we can # uniq them. ROMIO in particular adds lots of things already in wrapper_extra_libs, # and this cleans the duplication up a bunch. Always add everything the user # asked for, as they know better than us. AC_MSG_CHECKING([for OPAL LIBS]) OPAL_WRAPPER_EXTRA_LIBS="$opal_mca_wrapper_extra_libs" OPAL_FLAGS_APPEND_UNIQ([OPAL_WRAPPER_EXTRA_LIBS], [$wrapper_extra_libs]) OPAL_WRAPPER_EXTRA_LIBS="$OPAL_WRAPPER_EXTRA_LIBS $with_wrapper_libs" AC_SUBST([OPAL_WRAPPER_EXTRA_LIBS]) AC_MSG_RESULT([$OPAL_WRAPPER_EXTRA_LIBS]) ]) m4_ifdef([project_orte], [ AC_MSG_CHECKING([for ORTE CPPFLAGS]) if test "$WANT_INSTALL_HEADERS" = "1" ; then ORTE_WRAPPER_EXTRA_CPPFLAGS='-I${includedir}/openmpi' fi ORTE_WRAPPER_EXTRA_CPPFLAGS="$ORTE_WRAPPER_EXTRA_CPPFLAGS $orte_mca_wrapper_extra_cppflags $wrapper_extra_cppflags $with_wrapper_cppflags" AC_SUBST([ORTE_WRAPPER_EXTRA_CPPFLAGS]) AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_CPPFLAGS]) AC_MSG_CHECKING([for ORTE CFLAGS]) ORTE_WRAPPER_EXTRA_CFLAGS="$wrapper_extra_cflags $with_wrapper_cflags" AC_SUBST([ORTE_WRAPPER_EXTRA_CFLAGS]) AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_CFLAGS]) AC_MSG_CHECKING([for ORTE CFLAGS_PREFIX]) ORTE_WRAPPER_EXTRA_CFLAGS_PREFIX="$with_wrapper_cflags_prefix" AC_SUBST([ORTE_WRAPPER_EXTRA_CFLAGS_PREFIX]) AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_CFLAGS_PREFIX]) AC_MSG_CHECKING([for ORTE LDFLAGS]) ORTE_WRAPPER_EXTRA_LDFLAGS="$orte_mca_wrapper_extra_ldflags $wrapper_extra_ldflags $with_wrapper_ldflags" RPATHIFY_LDFLAGS([ORTE_WRAPPER_EXTRA_LDFLAGS]) AC_SUBST([ORTE_WRAPPER_EXTRA_LDFLAGS]) AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_LDFLAGS]) # Convert @{libdir} to ${libdir} for pkg-config _OPAL_SETUP_WRAPPER_FINAL_PKGCONFIG([ORTE]) AC_MSG_CHECKING([for ORTE LIBS]) ORTE_WRAPPER_EXTRA_LIBS="$orte_mca_wrapper_extra_libs" OPAL_FLAGS_APPEND_UNIQ([ORTE_WRAPPER_EXTRA_LIBS], [$wrapper_extra_libs]) ORTE_WRAPPER_EXTRA_LIBS="$ORTE_WRAPPER_EXTRA_LIBS $with_wrapper_libs" AC_SUBST([ORTE_WRAPPER_EXTRA_LIBS]) AC_MSG_RESULT([$ORTE_WRAPPER_EXTRA_LIBS]) m4_ifdef([project_ompi], [], [ # these are used by orte_info/ompi_info (yes, they are named poorly) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CFLAGS, "$ORTE_WRAPPER_EXTRA_CFLAGS", [Additional CFLAGS to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CFLAGS_PREFIX, "$ORTE_WRAPPER_EXTRA_CFLAGS_PREFIX", [Additional CFLAGS_PREFIX to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_LDFLAGS, "$ORTE_WRAPPER_EXTRA_LDFLAGS", [Additional LDFLAGS to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_LIBS, "$ORTE_WRAPPER_EXTRA_LIBS", [Additional LIBS to pass through the wrapper compilers]) ]) ]) m4_ifdef([project_ompi], [ AC_MSG_CHECKING([for OMPI CPPFLAGS]) if test "$WANT_INSTALL_HEADERS" = "1" ; then OMPI_WRAPPER_EXTRA_CPPFLAGS='-I${includedir}/openmpi' fi OMPI_WRAPPER_EXTRA_CPPFLAGS="$OMPI_WRAPPER_EXTRA_CPPFLAGS $ompi_mca_wrapper_extra_cppflags $wrapper_extra_cppflags $with_wrapper_cppflags" AC_SUBST([OMPI_WRAPPER_EXTRA_CPPFLAGS]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CPPFLAGS]) AC_MSG_CHECKING([for OMPI CFLAGS]) OMPI_WRAPPER_EXTRA_CFLAGS="$wrapper_extra_cflags $with_wrapper_cflags" AC_SUBST([OMPI_WRAPPER_EXTRA_CFLAGS]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CFLAGS]) AC_MSG_CHECKING([for OMPI CFLAGS_PREFIX]) OMPI_WRAPPER_EXTRA_CFLAGS_PREFIX="$with_wrapper_cflags_prefix" AC_SUBST([OMPI_WRAPPER_EXTRA_CFLAGS_PREFIX]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CFLAGS_PREFIX]) AC_MSG_CHECKING([for OMPI CXXFLAGS]) OMPI_WRAPPER_EXTRA_CXXFLAGS="$wrapper_extra_cxxflags $with_wrapper_cxxflags" AC_SUBST([OMPI_WRAPPER_EXTRA_CXXFLAGS]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CXXFLAGS]) AC_MSG_CHECKING([for OMPI CXXFLAGS_PREFIX]) OMPI_WRAPPER_EXTRA_CXXFLAGS_PREFIX="$with_wrapper_cxxflags_prefix" AC_SUBST([OMPI_WRAPPER_EXTRA_CXXFLAGS_PREFIX]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_CXXFLAGS_PREFIX]) AC_MSG_CHECKING([for OMPI FCFLAGS]) OMPI_WRAPPER_EXTRA_FCFLAGS="$wrapper_extra_fcflags $with_wrapper_fcflags" if test "$OMPI_FC_MODULE_FLAG" != "" ; then OMPI_WRAPPER_EXTRA_FCFLAGS="$OMPI_WRAPPER_EXTRA_FCFLAGS $OMPI_FC_MODULE_FLAG"'${libdir}' fi AC_SUBST([OMPI_WRAPPER_EXTRA_FCFLAGS]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_FCFLAGS]) AC_MSG_CHECKING([for OMPI FCFLAGS_PREFIX]) OMPI_WRAPPER_EXTRA_FCFLAGS_PREFIX="$with_wrapper_fcflags_prefix" AC_SUBST([OMPI_WRAPPER_EXTRA_FCFLAGS_PREFIX]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_FCFLAGS_PREFIX]) AC_MSG_CHECKING([for OMPI LDFLAGS]) OMPI_WRAPPER_EXTRA_LDFLAGS="$ompi_mca_wrapper_extra_ldflags $wrapper_extra_ldflags $with_wrapper_ldflags" RPATHIFY_LDFLAGS([OMPI_WRAPPER_EXTRA_LDFLAGS]) AC_SUBST([OMPI_WRAPPER_EXTRA_LDFLAGS]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_LDFLAGS]) # Convert @{libdir} to ${libdir} for pkg-config _OPAL_SETUP_WRAPPER_FINAL_PKGCONFIG([OMPI]) AC_MSG_CHECKING([for OMPI LIBS]) OMPI_WRAPPER_EXTRA_LIBS="$ompi_mca_wrapper_extra_libs" OPAL_FLAGS_APPEND_UNIQ([OMPI_WRAPPER_EXTRA_LIBS], [$wrapper_extra_libs]) OMPI_WRAPPER_EXTRA_LIBS="$OMPI_WRAPPER_EXTRA_LIBS $with_wrapper_libs" AC_SUBST([OMPI_WRAPPER_EXTRA_LIBS]) AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_LIBS]) # language binding support. C++ is a bit different, as the # compiler should work even if there is no MPI C++ bindings # support. However, we do want it to fail if there is no C++ # compiler. if test "$WANT_MPI_CXX_SUPPORT" = "1" ; then OMPI_WRAPPER_CXX_LIB="-lmpi_cxx" OMPI_WRAPPER_CXX_REQUIRED_FILE="" elif test "$CXX" = "none"; then OMPI_WRAPPER_CXX_LIB="" OMPI_WRAPPER_CXX_REQUIRED_FILE="not supported" else OMPI_WRAPPER_CXX_LIB="" OMPI_WRAPPER_CXX_REQUIRED_FILE="" fi AC_SUBST([OMPI_WRAPPER_CXX_LIB]) AC_SUBST([OMPI_WRAPPER_CXX_REQUIRED_FILE]) if test "$OMPI_WANT_FORTRAN_BINDINGS" = "1" ; then OMPI_WRAPPER_FORTRAN_REQUIRED_FILE="" else OMPI_WRAPPER_FORTRAN_REQUIRED_FILE="not supported" fi AC_SUBST([OMPI_WRAPPER_FORTRAN_REQUIRED_FILE]) # For script-based wrappers that don't do relocatable binaries. # Don't use if you don't have to. exec_prefix_save="${exec_prefix}" test "x$exec_prefix" = xNONE && exec_prefix="${prefix}" eval "OMPI_WRAPPER_INCLUDEDIR=\"${includedir}\"" eval "OMPI_WRAPPER_LIBDIR=\"${libdir}\"" exec_prefix="${exec_prefix_save}" AC_SUBST([OMPI_WRAPPER_INCLUDEDIR]) AC_SUBST([OMPI_WRAPPER_LIBDIR]) # if wrapper compilers were requested, set the ompi one up if test "$WANT_SCRIPT_WRAPPER_COMPILERS" = "1" ; then AC_CONFIG_FILES([ompi/tools/wrappers/ompi_wrapper_script], [chmod +x ompi/tools/wrappers/ompi_wrapper_script]) fi AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CFLAGS, "$OMPI_WRAPPER_EXTRA_CFLAGS", [Additional CFLAGS to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CFLAGS_PREFIX, "$OMPI_WRAPPER_EXTRA_CFLAGS_PREFIX", [Additional CFLAGS_PREFIX to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CXXFLAGS, "$OMPI_WRAPPER_EXTRA_CXXFLAGS", [Additional CXXFLAGS to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_CXXFLAGS_PREFIX, "$OMPI_WRAPPER_EXTRA_CXXFLAGS_PREFIX", [Additional CXXFLAGS_PREFIX to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_FCFLAGS, "$OMPI_WRAPPER_EXTRA_FCFLAGS", [Additional FCFLAGS to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_FCFLAGS_PREFIX, "$OMPI_WRAPPER_EXTRA_FCFLAGS_PREFIX", [Additional FCFLAGS to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_LDFLAGS, "$OMPI_WRAPPER_EXTRA_LDFLAGS", [Additional LDFLAGS to pass through the wrapper compilers]) AC_DEFINE_UNQUOTED(WRAPPER_EXTRA_LIBS, "$OMPI_WRAPPER_EXTRA_LIBS", [Additional LIBS to pass through the wrapper compilers]) ]) AC_DEFINE_UNQUOTED(WRAPPER_RPATH_SUPPORT, "$WRAPPER_RPATH_SUPPORT", [Whether the wrapper compilers add rpath flags by default]) ])