not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
Add two new configure options that specify:
1. when to add padding to the openib control header - this *only* happens when the configure option is specified
2. when to use the dr-like checksum as opposed to the memcpy checksum. Not selectable at runtime - to eliminate performance impacts, this is a configure-only option
Also removed an unused checksum version from opal/util/crc.h.
The new component still needs a little cleanup and some sync with recent ob1 bug fixes. It was created as a separate module to avoid performance hits in ob1 itself, though most of the code is duplicative. The component is only selectable by either specifying it directly, or configuring with the dr-like checksum -and- setting -mca pml_csum_enable_checksum 1.
Modify the LANL platform files to take advantage of the new module.
This commit was SVN r20846.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
Revert r20381 as two header files are "special".
This commit was SVN r20382.
The following SVN revision numbers were found above:
r20381 --> open-mpi/ompi@25b25aef41
architectures (read SPARC64) require aligned accesses, we increase the storage space
when we pack a datatype description to keep the fields aligned. This has to be done
on both sided in order to be consistent.
This commit was SVN r20133.
The solution is not to compute the OVERLAP flag, as the best we can do
is an approximative answer. Without this flag the unpack can leads to
unexpected answers if the data-type contain any overlapping regions.
As such datatypes are illegal in MPI, this became a user responsability.
This commit was SVN r20120.
* Add OMPI_F77_CHECK_REAL16_C_EQUV test whether REAL*16 is bit
equivalent to long double. AC_DEFINE OMPI_REAL16_MATCHES_C with
result (0 or 1).
* Update ompi_info to only show real16 support if
OMPI_REAL16_MATCHES_C is 1.
* Update DDT to only support REAL16 and COMPLEX32 if
1==OMPI_REAL16_MATCHES_C.
* MPI Op function pointer tabls will have NULL for the REAL16 and
COMPLEX32 entries if 0==OMPI_REAL16_MATCHES_C.
* Slightly cleaned up OMPI_F77_GET_ALIGNMENT and OMPI_F77_CHECK m4
tests (use OMPI_VAR_SCOPE_PUSH/POP).
This commit was SVN r19948.
The following Trac tickets were found above:
Ticket 1603 --> https://svn.open-mpi.org/trac/ompi/ticket/1603
always in a heterogeneous way in order to be able to support extern32. It
doesn't really matter as it is outside the critical path.
This commit was SVN r19651.
for the F90 type create functions to the requirements of MPI 2.1 standard.
Advice to implementors. An application may often repeat a call to
MPI_TYPE_CREATE_F90_xxxx with the same combination of (xxxx,p,r).
The application is not allowed to free the returned predefined, unnamed
datatype handles. To prevent the creation of a potentially huge amount of
handles, the MPI implementation should return the same datatype handle for
the same (REAL/COMPLEX/INTEGER,p,r) combination. Checking for the
combination (p,r) in the preceding call to MPI_TYPE_CREATE_F90_xxxx and
using a hash-table to find formerly generated handles should limit the
overhead of finding a previously generated datatype with same combination
of (xxxx,p,r). (End of advice to implementors.)
This commit fixes trac:1239, and #712.
This commit was SVN r19458.
The following Trac tickets were found above:
Ticket 1239 --> https://svn.open-mpi.org/trac/ompi/ticket/1239
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
with something with a different size ... well we segfault. The reason was
that the logic in the PML OB1 call the convertor based on the length
of he data on the wire and not the length of the data that the receiver
expects.
In other words, this is only half a patch :) It fix the problem, but we
still have to make sure the unpack is not called at all when the receiver
expect ZERO bytes.
This commit was SVN r18474.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Event var_deref_model: Variable "array_of_integers" tracked as NULL was
passed to a function that dereferences it. [model]
The arrays passed down type_get_contents may be NULL, only iff max_* is 0...
If the max_* parameter does not fit, an error is returned, anyhow.
One could improve the checks of MPI_PARAM_CHECK, but to be on the
safe side, fix in dt_args.c.
This commit was SVN r17974.
