1
1
Граф коммитов

90 Коммитов

Автор SHA1 Сообщение Дата
Ethan Mallove
fc37e408c2 Avoid SEGV in case rsh/ssh is not in PATH (refs trac:1490)
This commit was SVN r23278.

The following Trac tickets were found above:
  Ticket 1490 --> https://svn.open-mpi.org/trac/ompi/ticket/1490
2010-06-17 14:58:09 +00:00
George Bosilca
f453265de2 Only call gettimeofday once.
This commit was SVN r23235.
2010-06-02 09:44:37 +00:00
Abhishek Kulkarni
afbe3e99c6 * Wrap all the direct error-code checks of the form (OMPI_ERR_* == ret) with
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
 SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
 back the native error code.

* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
  (OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
  decode 'ret' to get the native error code.

This commit was SVN r23162.
2010-05-17 23:08:56 +00:00
Ralph Castain
88f5217a12 Cleanup the debugger daemon co-launch code and add an ability to test it. Implement ability to co-launch debugger daemons upon attach to a running job for jobs launched under rsh, slurm, and tm environments (others can easily be added if desired).
Add new mca params to test:

orte_debugger_test_daemon: Name of the executable to be used to simulate a debugger colaunch
orte_debugger_test_attach: Test debugger colaunch after debugger attachment

To test co-launch at job start, just set the orte_debugger_test_daemon param.

To test co-launch upon attach:
set orte_debugger_test_daemon
set orte_debugger_test_attach=1
set orte_enable_debug_cospawn_while_running=1
set orte_debugger_check_rate=<N> - defines the number of seconds to wait before "checking" for a debugger attaching

Added a "debugger" program to orte/test/mpi that just spins to simulate a debugger daemon.

This commit was SVN r23144.
2010-05-14 18:44:49 +00:00
Ralph Castain
2ff1ae13e1 Create a new "heartbeat" module in the sensor framework and move the plm_base heartbeat code there. Add new proc and job states for heartbeat_failed. Remove the "heartbeat" cmd line option for orted as this is now done automatically if the --enable-heartbeat configure option is set.
This commit was SVN r23102.
2010-05-05 00:48:43 +00:00
Ralph Castain
efbb5c9b7c Revamp the errmgr framework to provide a greater range of optional behaviors, including different behaviors for daemons, and remove several looping messages across the code base:
* add hnp and orted modules to the errmgr framework. The HNP module contains much of the code that was in the errmgr base since that code could only be executed by the HNP anyway.

* update the odls to report process states directly into the active errmgr module, thus removing the need to send messages looped back into the odls cmd processor. Let the active errmgr module decide what to do at various states.

* remove the code to track application state progress from the plm_base_launch_support.c code. Update the plm modules to call the errmgr directly when a launch fails.

* update the plm_base_receive.c code to call the errmgr with state updates from remote daemons

* update the routed modules to reflect that process state is updated in the errmgr

* ensure that the orted's open the errmgr and select their appropriate module

* add new pretty-print utilities to print process and job state. Move the pretty-print of time info to a globally-accessible place

* define a global orte_comm function to send messages from orted's to the HNP so that others can overlay the standard RML methods, if desired.

* update the orterun help output to reflect that the "term w/o sync" error message can result from three, not two, scenarios

This commit was SVN r23023.
2010-04-23 04:44:41 +00:00
Ralph Castain
1caba7af2f Fix a bunch of compiler warnings reported by Jeff
This commit was SVN r22930.
2010-04-03 00:20:19 +00:00
Josh Hursey
e4f2d03d28 ErrMgr Framework redesign to better support fault tolerance development activities.
Explained in more detail in the following RFC:
  http://www.open-mpi.org/community/lists/devel/2010/03/7589.php

This commit was SVN r22872.
2010-03-23 21:28:02 +00:00
Ralph Castain
66efa05a53 Don't cancel the recv unless it was issued or else we generate an error whenever we launch an app without having to launch daemons (e.g., a completely local launch to mpirun)
This commit was SVN r22256.
2009-12-03 04:28:43 +00:00
George Bosilca
7bf1d7a1c4 A more asynchronous startup over rsh/ssh.
This commit was SVN r22253.
2009-12-02 20:29:32 +00:00
Ralph Castain
51b13b3d5c A few minor cleanups in where threads are unlocked.
Reset mpirun's exit code when we restart failed procs

This commit was SVN r21955.
2009-09-09 05:31:06 +00:00
Ralph Castain
dbb3cbe3dd Fix a reported problem when specifying orte_launch_agent - if only one word was given, we inadvertently appended a "NULL" to the end of the cmd.
This commit was SVN r21827.
2009-08-18 14:57:34 +00:00
Ralph Castain
6c85d954f3 Use a conditioned wait to serialize launches when they come from multiple sources (e.g., an orte application that spawns multiple jobs).
This commit was SVN r21718.
2009-07-20 01:51:29 +00:00
Ralph Castain
1d74ab6e3c Cleanup some pointer array addressing and ensure we always exit the function cleanly
This commit was SVN r21716.
2009-07-19 18:05:04 +00:00
Ralph Castain
210f591f1c Cleanup array addressing for opal_pointer_array
This commit was SVN r21710.
2009-07-17 22:20:30 +00:00
Ralph Castain
b97f885c00 Restore the original API to terminate individual processes instead of the entire job. This was originally removed as we didn't at that time know how to take advantage of it. Some of us are now working on proactive resilience methods that move procs prior to node failure, so this is now a required API. Modify the odls, plm, and orted functions to support this new functionality.
Continue work on the resilient mapper, completing support for fault groups.

This commit was SVN r21639.
2009-07-13 02:29:17 +00:00
Josh Hursey
26363fcc8b Move the end timer to the end of the launch loop for the HNP. This matches the timing in the SLURM component, and makes the timing work when enabling the 'tree' based rsh launch.
This commit was SVN r21528.
2009-06-25 13:28:34 +00:00
Josh Hursey
8705c7edb1 Fix {{{orte_timing}}} for the RSH component of the PLM.
It never set the daemon launch counter before launching.
In the output for 'total job launch time' make the message match that of the SLURM PLM for easier parsing.

This commit was SVN r21527.
2009-06-25 12:37:58 +00:00
George Bosilca
fabebd140f If the daemon doesn't contain orted we're adding the prefix_dir and
bin_base twice. Create a temporary full_orted_cmd to cope with this
case.

This commit was SVN r21519.
2009-06-24 23:57:32 +00:00
George Bosilca
32f632ad5a Put back the multi-word command line argument for the RSH PLM.
This commit was SVN r21518.
2009-06-24 23:51:53 +00:00
George Bosilca
35033aeae9 Allow the PLM RSH to follow the routing table with the spawn, instead of the hard
coded binomial approach. Now, the PLM extract the children information from the
routed component, and the startup follow the routed topology. As a side effect,
we can now launch using linear or radix topologies, in addition to the previously
binomial topology.

This commit was SVN r21514.
2009-06-24 19:56:29 +00:00
George Bosilca
7339530061 Remove the prototype of a non-existant function.
This commit was SVN r21500.
2009-06-23 19:50:23 +00:00
Ralph Castain
7a802a9d3a Move the plm designation to the argv from the env to support those systems not setup to pass env via rsh.
This commit was SVN r21495.
2009-06-22 18:08:45 +00:00
Ralph Castain
0336460b0a Continue implementation of resilient operations by supporting reuse of jobids for restarted procs. Ensure that restarted processes have valid node and local ranks, and that node rank values are passed to direct-launched processes.
This commit was SVN r21385.
2009-06-06 01:08:47 +00:00
Ralph Castain
4e0223a638 Add the ability to directly launch procs via rsh/ssh. Collect common functions in plm/base. Create a new global param to set assume_same_shell, alias'd back to plm_rsh_assume_same_shell (not deprecated).
This commit was SVN r21328.
2009-05-30 01:10:25 +00:00
Ralph Castain
f139cfd28a Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job).
Add a new tm ess module that exploits this capability.

Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function.

Additional fixes included:

1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with!

2. fix a duplicate free when attempting to execute a non-existent app

3. cleanup an typo in the comm utilities 

4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps

Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info.

This commit was SVN r21248.
2009-05-16 04:15:55 +00:00
Ralph Castain
c45ff0d59f Take the next step towards fully utilizing static ports for the daemons to eliminate the initial "phone home" to mpirun by modifying the orted termination procedure to eliminate the need for a full barrier-like operation. Instead, we add a "onesided" barrier to the grpcomm framework API that releases the orted once it has completed its own contribution to the barrier - i.e., the orteds now exit as the "ack" message rolls up towards mpirun instead of sending the "ack" directly to mpirun.
This causes the orteds in the routing tree to remain alive until all termination "acks" from orteds below them have passed through. Thus, if we use static ports, we no longer require a direct orted-to-mpirun connection.

Also modify the binomial routed module so it conforms to what all the other routed modules do and have all messages pass along the routing tree instead of short-circuiting between orteds. This further reduces the number of ports being opened on backend nodes.

This commit was SVN r21203.
2009-05-11 14:11:44 +00:00
Greg Koenig
60485ff95f This is a very large change to rename several #define values from
OMPI_* to OPAL_*.  This allows opal layer to be used more independent
from the whole of ompi.

NOTE: 9 "svn mv" operations immediately follow this commit.

This commit was SVN r21180.
2009-05-06 20:11:28 +00:00
Ralph Castain
4be24521aa Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans.
Minor mod to the ompi layer to use the new #define's - just one-line name replacements.

This commit was SVN r21144.
2009-05-04 11:07:40 +00:00
Rainer Keller
221fb9dbca ... Delayed due to notifier commits earlier this day ...
- Delete unnecessary header files using
   contrib/check_unnecessary_headers.sh after applying
   patches, that include headers, being "lost" due to
   inclusion in one of the now deleted headers...

   In total 817 files are touched.
   In ompi/mpi/c/ header files are moved up into the actual c-file,
   where necessary (these are the only additional #include),
   otherwise it is only deletions of #include (apart from the above
   additions required due to notifier...)

 - To get different MCAs (OpenIB, TM, ALPS), an earlier version was
   successfully compiled (yesterday) on:
   Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
   Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
   Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled

This commit was SVN r21096.
2009-04-29 01:32:14 +00:00
George Bosilca
faca1aeeb9 Support for password structures without a specified shell or a NULL/empty shell.
This commit was SVN r20853.
2009-03-24 13:26:57 +00:00
Jeff Squyres
27bacbee3c Per discussion on #1833, we should ''always'' dup /dev/null into ssh's
stdin.

This commit was SVN r20790.
2009-03-16 19:12:48 +00:00
George Bosilca
02bee12de8 Small cleanup.
This commit was SVN r20781.
2009-03-14 23:11:24 +00:00
Brian Barrett
716b505789 Fix for #1832. The stdin for the forked ssh wasn't being closed, so it was
"eating" all the stdin, leaving nothing for mpirun to forward on to the child
process

This commit was SVN r20776.
2009-03-13 22:34:56 +00:00
Rainer Keller
ec0ed48718 - Revert r20739
This commit was SVN r20742.

The following SVN revision numbers were found above:
  r20739 --> open-mpi/ompi@781caee0b6
2009-03-05 21:56:03 +00:00
Rainer Keller
a94438343b - Revert r20740
This commit was SVN r20741.

The following SVN revision numbers were found above:
  r20740 --> open-mpi/ompi@2a70618a77
2009-03-05 21:50:47 +00:00
Rainer Keller
2a70618a77 - Second patch, as discussed in Louisville.
Replace short macros in orte/util/name_fns.h
   to the actual fct. call.

 - Compiles on linux/x86-64

This commit was SVN r20740.
2009-03-05 21:14:18 +00:00
Rainer Keller
781caee0b6 - First of two or three patches, in orte/util/proc_info.h:
Adapt orte_process_info to orte_proc_info, and
   change orte_proc_info() to orte_proc_info_init().
 - Compiled on linux-x86-64
 - Discussed with Ralph

This commit was SVN r20739.
2009-03-05 20:36:44 +00:00
Rainer Keller
04567d3af0 - Header orte/mca/errmgr/errmgr.h is not needed.
Once again compiles fine with -Wimplicit-function-declaration   

This commit was SVN r20640.
2009-02-26 04:05:30 +00:00
Rainer Keller
96e1b9b747 - Header orte/mca/rml/rml.h is not needed if no occurence of orte_rml
or ORTE_RML.
   As the others compiles fine with -Wimplicit-function-declaration

This commit was SVN r20639.
2009-02-26 03:52:31 +00:00
Rainer Keller
02599446d0 - Occurences of ORTE_PROC_MY_NAME require orte/runtime/orte_globals.h
This commit was SVN r20607.
2009-02-20 03:16:13 +00:00
Rolf vandeVaart
515b99b357 Under SGE, the orted should not daemonize by default.
Also create mca parameter to force daemonization (previous
behavior) which might be needed on larger clusters or
to make use of the -notify flag with qsub.

This fixes trac:1783.

This commit was SVN r20582.

The following Trac tickets were found above:
  Ticket 1783 --> https://svn.open-mpi.org/trac/ompi/ticket/1783
2009-02-18 18:02:38 +00:00
Rainer Keller
d81443cc5a - On the way to get the BTLs split out and lessen dependency on orte:
Often, orte/util/show_help.h is included, although no functionality
   is required -- instead, most often opal_output.h, or               
   orte/mca/rml/rml_types.h                                           
   Please see orte_show_help_replacement.sh commited next.            

 - Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
   actually showed two *missing* #include "orte/util/show_help.h"     
   in orte/mca/odls/base/odls_base_default_fns.c and                  
   in orte/tools/orte-top/orte-top.c                                  
   Manually added these.                                              

   Let's have MTT the last word.

This commit was SVN r20557.
2009-02-14 02:26:12 +00:00
Rolf vandeVaart
ce97c27a53 Make sure we create a valid parth argument for execve.
This gets SGE working in the trunk again.

This commit was SVN r20531.
2009-02-12 18:27:40 +00:00
Ralph Castain
816ef9e0a3 Ensure that the rsh_agent_argv is properly initialized when assembling the SGE qrsh command
This commit was SVN r20518.
2009-02-11 18:48:44 +00:00
Ralph Castain
f0af389910 Enable comm_spawn of slave processes, currently only active for the rsh, slurm, and tm environments. Establish support for local rsh environments in the plm/base so that rsh of local slaves can be done by any environment that supports it. Create new orte_rsh_agent param so users can specify rsh agent from outside of rsh plm, and sym link that to the old plm_rsh_agent and pls_rsh_agent options.
Modify the orte-bootproxy to pass prefix for the remote slave to support hetero/hybrid scenarios

This commit was SVN r20492.
2009-02-09 20:44:44 +00:00
Ralph Castain
f36b9332ab Pass along the new output-filename and xterm cmd line options to the orteds - otherwise, they won't work in ssh environments.
Modify the rsh launcher to add -X to ssh if xterm option was selected.

This commit was SVN r20407.
2009-02-03 20:06:05 +00:00
Jeff Squyres
bb3d258562 Round up a few places where PATH_MAX was used instead of
OMPI_PATH_MAX.  Thanks to Andrea Iob for the bug report.

This commit was SVN r20360.
2009-01-27 22:57:50 +00:00
Ralph Castain
f54fda489e This is a first step towards supporting fully-routed OOB communications:
1. remove direct routed module (hooray!)

2. add radix tree routed module (binomial remains default)

3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess

4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support

5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability

6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon)

Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm.

This will require an autogen...

This commit was SVN r19866.
2008-10-31 21:10:00 +00:00
Jeff Squyres
6d026b86b7 Fix a problem reported on the user list by Teng Lin: OPAL_PREFIX
wasn't exported in the Bourne-shell-flavor case on remote nodes.

This commit was SVN r19770.
2008-10-18 12:13:10 +00:00