The usNIC BTL does not use more than 1 iov, so be sure to set it to 1
so that we don't allocate cq/rq/sq entries based on a default (i.e.,
>1) number of iovs per entry.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This PR renames the common library for OFI libfabric from
libfabric to ofi. There are a number of reasons this
is good to do:
1) its shorter and replaces 9 characters with three for
function names for what may eventually be a fairly extensive interface
2) OFI is the term used for MTL and RML components that use
the OFI libfabric interface
3) A planned OSC component will also use the OFI term.
4) Other HPC libraries that can use OFI libfabric tend to use
the term "ofi" internally and also in their configure options
relevant to OFI libfabric (i.e. MPICH/CH4, Intel MPI, Sandia SHMEM)
There seem to be comments in places in the Open MPI source
code that indicate that this common library will be going away.
Far from it as we will want to be able to share things like
AV objects between OMPI and possibly OSHMEM components that
use the OFI libfabric interface.
This PR also adds a synonym to the --with-libfabric(-libdir)
configury options: --with-ofi and with-ofi-libdir.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This should probably not go to the v2.x branch, since it changes the
output format of the usnic stats.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Double check the queue lengths that we get back from libfabric to
ensure that they are at least as long as we need. They *should* never
be shorter than we need, but let's just check to be sure.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Don't just blindly send ACKs; ensure that we have send credits before
doing so. If we don't have any send credits, just don't send the ACK
(it'll come again soon enough; it's not a tragedy if we don't send it
now).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The libfabric usnic provider may give you back TX/RX queues that are
longer than you asked for. So just use the TX/RQ/CQ lengths that we
asked for, regardless of what length comes back.
Additionally, keep the length of the priority channel CQ separate from
the length of the data CQ.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Since the usnic BTL is single-threaded in this area, there really is
no danger, but don't use one of the pointers hanging off the frag
after we return it to the freelist. Instead, save the endpoint
pointer before returning the frag.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The types are technically typedef equivalent, but it's less confusing
to use the types that agree with the name of the constructor.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
There are only five places in the non-daemon code paths where opal_hwloc_topology is currently referenced:
* shared memory BTLs (sm, smcuda). I have added a code path to those components that uses the location string
instead of the topology itself, if available, thus avoiding instantiating the topology
* openib BTL. This uses the distance matrix. At present, I haven't developed a method
for replacing that reference. Thus, this component will instantiate the topology
* usnic BTL. Uses the distance matrix.
* treematch TOPO component. Does some complex tree-based algorithm, so it will instantiate
the topology
* ess base functions. If a process is direct launched and not bound at launch, this
code attempts to bind it. Thus, procs in this scenario will instantiate the
topology
Note that instantiating the topology on complex chips such as KNL can consume
megabytes of memory.
Fix pernode binding policy
Properly handle the unbound case
Correct pointer usage
Do not free static error messages!
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
We only support running with libfabric v1.3 or greater. So it's safe
to remove the legacy/adaptive cq_readerr() behavior.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
There are critical usnic libfabric AV insert bugs before v1.3, so
don't allow any version prior to v1.3 at run time (still allow
*compiling* with earlier versions, though, since the ABI guarantees
allow us to compile with an earlier libfabric and run with a later
libfabric).
Switch to using fi_version() to check the version (instead of calling
fi_getinfo()) as a potentially lighter-weight / simpler solution.
This allows us to only call fi_getinfo() once.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The (effective) "+42" computation was, in fact, the incorrect answer
in this case (gasp!).
We should just take the max_msg_size from the command (which came from
the libfabric endpoint max_msg_size attribute in the client) and
subtract off the max header size: 68 (which is explained in the
comment). This will result in a "large" message size which is likely
slightly smaller than the MTU, but still right up near the MTU, and
therefore good enough.
Note: the old computation (i.e., -(68-42)) worked fine when we asked
for Libfabric API v1.1 because the usnic provider would return a
max_msg_size that was already less than the MTU due to FI_PREFIX
behavior shenanigans. Once we started asking for Libfabric API v1.4,
the usnic Libfabric provider started returning (MTU + prefix_size),
and the -(68-42) computation started giving a value that was over the
MTU. This caused sendto() on the connectivity checker UDP socket
to fail.
This commit also removes an old/misleading comment.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
* Add a configure time option to rename libmpi(_FOO).*
- `--with-libmpi-name=STRING`
* This commit only impacts the installed libraries.
Internal, temporary libraries have not been renamed to limit the
scope of the patch to only what is needed.
For example:
```shell
shell$ ./configure --with-libmpi-name=wookie
...
shell$ find . -name "libmpi*"
shell$ find . -name "libwookie*"
./lib/libwookie.so.0.0.0
./lib/libwookie.so.0
./lib/libwookie.so
./lib/libwookie.la
./lib/libwookie_mpifh.so.0.0.0
./lib/libwookie_mpifh.so.0
./lib/libwookie_mpifh.so
./lib/libwookie_mpifh.la
./lib/libwookie_usempi.so.0.0.0
./lib/libwookie_usempi.so.0
./lib/libwookie_usempi.so
./lib/libwookie_usempi.la
shell$
```
With libfabric v1.4, the usnic provider changed the values of its
fabric and domain name strings (compared to libfabric <v1.4). Update
the Open MPI usNIC BTL to handle both pre-v1.4 and v1.4 fabric/domain
names.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The math for checking the number of QPs and CQs per usNIC/VF was
incorrect, allowing you to run MPI processes even when usNICs (i.e.,
VIC VFs) had fewer QPs and CQs than were necessary. This led to a
confusing error later when fi_enable(3) failed (because we lazily
create QPs). Fixing the math here ensure that we actually print a
helpful error message telling the user specifically what is wrong.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Add primitive magic number and version checking in the connectivity
checker protocol. These checks doesn't *guarantee* to we won't get
false PINGs and ACKs, but they do significantly reduce the possibility
of interpretating random incoming fragments as PINGs or ACKs.
The btl_recv.h:lookup_sender() function uses the hashed ORTE proc name
to determine the sender of the packet. With add_procs_cutoff>0, the
usnic BTL may not have knowledge of all the senders.
Until the usNIC BTL can be adjusted to do something like the
openib/ugni BTLs (i.e., use opal_proc_for_name() to lookup unknown
sender proc names), set MCA_BTL_FLAGS_SINGLE_ADD_PROCS, which means
that ob1 will only all add_procs() once -- with all the procs in it.
Also in this commit, adapt the connectivity checker to not rely on
knowing all the senders (which is a bit easier than adapting the main
BTL send path): the receiving connectivity agent will simply echo back
the same PING message (which contains the sender's IP address+UDP
port) back to the sender without checking that it knows who the sender
is. If the sender receives the echoed PING back on the expexted
interface, it will find a match in the pending pings list. If the
sender receives the echoed PING back an unexpected interface, a match
will not be found, and the incoming PING message will be dropped.
Fixesopen-mpi/ompi#1440
Three minor updates from the code review of
https://github.com/open-mpi/ompi-release/pull/933:
* Remove an extra blank line a show_help message
* We no longer allow -1 for the MCA param btl_usnic_av_eq_num, so
change the flag to REGINT_GE_ONE
* Change "num_blocks" definition to be in terms of block_len (not
eq_size)
