the ofi mtl mrecv was not properly setting the message in/out
arg to MPI_MRECV to MPI_MESSAGE_NULL.
Signed-off-by: Howard Pritchard <hppritcha@gmail.com>
The btl/ofi does not currently utilize the common ofi include/exclude
list. Added verification code similar to the mtl/ofi that will check if
the info object is in the include or exclude list. If it isn't in the
include list or is in the exclude list, validate_info will return
OPAL_ERROR. The btl/ofi will no longer pass a provider name as a hint
when calling getinfo, instead filtering the provider during
validate_info.
This patch also moves the is_in_list MTL function into common code and
adds additional debugging output to the BTL to match the MTL standard.
Signed-off-by: William Zhang <wilzhang@amazon.com>
ompi_mtl_portals4_get_endpoint() was incorrectly making a direct
call to ompi_mtl_portals4_add_procs(). Instead use the actve PML
to call add_procs(). If add_procs() fails, call ompi_rte_abort()
to terminate the job.
Signed-off-by: Todd Kordenbrock <thkgcode@gmail.com>
Once any number of events are read, return immediately, rather than
waiting for fi_cq_read() to return FI_EAGAIN or an error. This can
improve observed latency if the user application is in a blocking call
waiting for us to return. Deleting the while loop here also means
ofi_progress_event_count serves as an upper bound for the total number
of events read in a single call (with the while loop we might read far
more, as long as new events continue to arrive).
Signed-off-by: Eric Badger <eric@badgerio.us>
As discussed, a feature is being added to libpsm2 to correctly handle
the case where the library is opened by multiple OMPI transports in the same
process. (For example, the OFI BTL and the PSM2 MTL).
* Improved error message to indicate required libpsm2 version.
* Adds a test at autogen/configure time for the existence of
PSM2_LIB_REFCOUNT_CAP.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Signed-off-by: Michael Heinz <michael.william.heinz@intel.com>
Change ompi_mtl_ofi_get_endpoint() to call the active PML's add_procs()
rather than the OFI MTL add_procs() directly when discovering a new
process during operation.
Functionally, this has no impact in correct operation. However, the
current behavior means that the heterogenous and active PML checks
are not being executed in the dynamic discovery case.
Signed-off-by: Michael Heinz <michael.william.heinz@intel.com>
also add common verbose variable.
Note the verbosity thing is a little tricky owing to the way the MCA frameworks and components are registered and
and initialized. The BTL's are registered/initialized prior to the MTL components even getting registered.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Adds the capability to select a NIC based on hardware locality.
Creates a list of NICs that share the same cpuset as the process,
then selects the NIC based on the (local rank) % (number of NICs).
If no NICs are available that share the same cpuset, the selection process
will create a list of all available NICs and make a selection based on
(local rank) % (number of NICs)
Signed-off-by: Nikola Dancejic <dancejic@amazon.com>
Consolidate the ompi_process_info and opal_process_info structs to
remove duplicate storage and conversion issues. Unwind some interweaving
of include files using opal.h. Silence a couple of warnings.
For now, set the arch to local if PMIX_ARCH is not found.
Signed-off-by: Ralph Castain <rhc@pmix.org>
Change ompi_mtl_ofi_get_endpoint() to call the active PML's
add_procs() rather than the OFI MTL add_procs() directly when
discovering a new process during operation.
Functionally, this has no impact in correct operation. However,
the current behavior means that the heterogenous and active PML
checks are not being executed in the dynamic discovery case.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
We currently save the hostname of a proc when we create the ompi_proc_t for it. This was originally done because the only method we had for discovering the host of a proc was to include that info in the modex, and we had to therefore store it somewhere proc-local. Obviously, this ccarried a memory penalty for storing all those strings, and so we added a "cutoff" parameter so that we wouldn't collect hostnames above a certain number of procs.
Unfortunately, this still results in an 8-byte/proc memory cost as we have a char* pointer in the opal_proc_t that is contained in the ompi_proc_t so that we can store the hostname of the other procs if we fall below the cutoff. At scale, this can consume a fair amount of memory.
With the switch to relying on PMIx, there is no longer a need to cache the proc hostnames. Using the "optional" feature of PMIx_Get, we restrict the retrieval to be purely proc-local - i.e., we retrieve the info either via shared memory or from within the proc-internal hash storage (depending upon the active PMIx components). Thus, the retrieval of a hostname is purely a local operation involving no communication.
All RM's are required to provide a complete hostname map of all procs at startup. Thus, we have full access to all hostnames without including them in a modex or having to cache them on each proc. This allows us to remove the char* pointer from the opal_proc_t, saving us 8-bytes/proc.
Unfortunately, PMIx_Get does not currently support the return of a static pointer to memory. Thus, even though PMIx has the hostname in its memory, it can only return a malloc'd version of it. I have therefore ensured that the return from opal_get_proc_hostname is consistently malloc'd and free'd wherever used. This shouldn't be a burden as the hostname is only used in one of two circumstances:
(a) in an error message
(b) in a verbose output for debugging purposes
Thus, there should be no performance penalty associated with the malloc/free requirement. PMIx will eventually be returning static pointers, and so we can eventually simplify this method and return a "const char*" - but as noted, this really isn't an issue even today.
Signed-off-by: Ralph Castain <rhc@pmix.org>
Will be replaced by PRRTE. Ensure that OMPI and OPAL layers build
without reference to ORTE. Setup opal/pmix framework to be static.
Remove support for all PMI-1 and PMI-2 libraries. Add support for
"external" pmix component as well as internal v4 one.
remove orte: misc fixes
- UCX fixes
- VPATH issue
- oshmem fixes
- remove useless definition
- Add PRRTE submodule
- Get autogen.pl to traverse PRRTE submodule
- Remove stale orcm reference
- Configure embedded PRRTE
- Correctly pass the prefix to PRRTE
- Correctly set the OMPI_WANT_PRRTE am_conditional
- Move prrte configuration to the end of OMPI's configure.ac
- Make mpirun a symlink to prun, when available
- Fix makedist with --no-orte/--no-prrte option
- Add a `--no-prrte` option which is the same as the legacy
`--no-orte` option.
- Remove embedded PMIx tarball. Replace it with new submodule
pointing to OpenPMIx master repo's master branch
- Some cleanup in PRRTE integration and add config summary entry
- Correctly set the hostname
- Fix locality
- Fix singleton operations
- Fix support for "tune" and "am" options
Signed-off-by: Ralph Castain <rhc@pmix.org>
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Some versions of Libfabric contain a bug in EFA where FI_REMOTE_COMM and
FI_LOCAL_COMM are not advertised. In order to workaround this, we need to call
fi_getinfo() without those capability bits to see if EFA is available first.
Also move around some of the provider include/exclude list logic so we can skip
this workaround if applicable.
Signed-off-by: Robert Wespetal <wesper@amazon.com>
Make sure to get an RDM provider that can provide both local and
remote communication. We need this check because some providers could
be selected via RXD or RXM, but can't provide local communication, for
example.
Add OPAL_CHECK_OFI_VERSION_GE() m4 macro to check that the Libfabric
we're building against is >= a target version. Use this check in two
places:
1. MTL/OFI: Make sure it is >= v1.5, because the FI_LOCAL_COMM /
FI_REMOTE_COMM constants were introduced in Libfabric API v1.5.
2. BTL/usnic: It already had similar configury to check for Libfabric
>= v1.1, but the usnic component was checking for >= v1.3. So
update the btl/usnic configury to use the new macro and check for
>= v1.3.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Change the provider include and exclude list name comparison check to
ignore case. The UDP provider's name is uppercase and was being selected
despite being in the exclude list.
Signed-off-by: Robert Wespetal <wesper@amazon.com>
This commit fixes a segfault in mtl-portals4 finalize(). The segfault
occurs if finalize() is called without any calls to add_procs(). This
commit resolves the segfault by skipping the flow control fini() call if
Portals4 was not initialized.
Signed-off-by: Todd Kordenbrock <thkgcode@gmail.com>
one off patch for v4.0.x. for some reason commit on master
didn't have this problem.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
(cherry picked from commit 5f3dbdb5c8a94a4f426ecca1a3a91c83035f956c)
Note that this commit is actually a cherry-pick from the v4.0.x
branch. This is the opposite direction than what we nornmally do: we
usually commit to master first and then cherry-pick to the release
branches (vs. the other way around).
As is probably evident from the original commit message above, through
a comedy of errors, this commit was actually applied to the v4.0.x
branch first and then cherry-picked back to master (i.e., the problem
*did* exist in the original master commit
3aca4af548a3d781b6b52f89f4d6c7e66d379609, but it was not recongized at
the time).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
INTERNAL: STL-59403
The OFI (libfabric) MTL does not respect the maximum message size
parameter that OFI provides in the fi_info data.
This patch adds this missing max_msg_size field to the mca_ofi_module_t
structure and adds a length check to the low-level send routines.
Change-Id: I05aa71d332f2df897133b30c28bf37d98f061996
Signed-off-by: Michael Heinz <michael.william.heinz@intel.com>
Reviewed-by: Adam Goldman <adam.goldman@intel.com>
Reviewed-by: Brendan Cunningham <brendan.cunningham@intel.com>
The PSM MTL for Intel's TrueScale Infiniband HCAs is not being actively
maintained and should be removed from the master branch.
Fixes issue: #6877
Signed-off-by: Michael Heinz <michael.william.heinz@intel.com:
Updated the OFI MTL's Recv cancel to be a non-blocking call to match
the MPI spec. Given fi_cancel succeeded, then it is expected that the
user will wait on the request to read the result of if the cancel has
completed.
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com
For the non thread-grouping paths, only the first (0th) OFI context
should be used for communication. Otherwise this would access a non existant
array item and cause segfault.
While at it, clarifiy some content regarding SEPs in README (Credit to Matias Cabral
for README edits).
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
Update the OPAL_CHECK_OFI configury macro:
- Make it safe to call the macro multiple times:
- The checks only execute the first time it is invoked
- Subsequent invocations, it just emits a friendly "checking..."
message so that configure output is sensible/logical
- With the goal of ultimately removing opal/mca/common/ofi, rename the
output variables from OPAL_CHECK_OFI to be
opal_ofi_{happy|CPPFLAGS|LDFLAGS|LIBS}.
- Update btl/ofi, btl/usnic, and mtl/ofi for these new conventions.
- Also, don't use AC_REQUIRE to invoke OPAL_CHECK_OFI because that
causes the macro to be invoked at a fairly random time, which makes
configure stdout confusing / hard to grok.
- Remove a little left-over kruft in OPAL_CHECK_OFI, too (which
resulted in an indenting change, making the change to
opal_check_ofi.m4 look larger than it really is).
Thanks Alastair McKinstry for the report and initial fix.
Thanks Rashika Kheria for the reminder.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
When we exceed the threshold number of contexts created, print appropriate help
text
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
Provide the av_attr.count hint (number of addresses that will be
inserted into the address vector through the life of the process)
at initialization of the address vector. It's ok to be a bit
wrong, but some endpoints (RxR) can benefit by not going through
the slow growth realloc churn.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
With MTLs, there's no "other transport" when the remote side
does not have an active NIC, so we should print a useful error
message when the modex failed (indicating lack of a NIC on
the remote side).
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Moving to a model where we have users actively _enable_ SEP feature for use
rather than opening SEP by default if provider supports it. This allows us to
not regress (either functionally or for performance reasons) any apps that were
working correctly on regular endpoints.
Also, providing MCA to specify number of OFI contexts to create and default
this value to 1 (Given btl/ofi also creates one by default, this reduces the
incidence of a scenario where we allocate all available contexts by default and
if btl/ofi asks for one more, then provider breaks as it doesn't support it).
While at it, spruce up README on SEP content.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
-> Added new targets in Makefile.am to call a new build script
generate-opt-funcs.pl to generate specialized functions for
each *.pm file.
-> Added new perl module *.pm files for send,isend,irecv,iprobe,improbe
which are loaded by generate-opt-funcs.pl to create new source files
that correspond to the name of the .pm file to be used as part of
MTL OFI.
-> Added mtl_ofi_opt.pm.template and updated README with details on the
specialization features and how to add additional specialization
support.
-> Added new opt_common/mtl_ofi_opt_common.pm containing common
functions for generating the specialized functions used by
all other *.pm modules.
-> Added new mtl_ofi.h which includes the definitions for the
function symbol table for storing the specialized functions along
with the definitions for the initialization functions for the
corresponding function pointers.
-> Based off the OFI provider capabilities the specialized function
pointers are assigned at mtl_ofi_component_init to the corresponding
MTL OFI function.
-> mca_mtl_ofi_module_t has been updated with the symbol table
struct which is assigned at component init.
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com>
For cases when the number of local processes is greater than the number of
available contexts, the SEP initialization phase would calculate the number of
contexts to provision for each rank to be 0 and would eventually crash.
Fix the issue here by using regular endpoints in the event the number of local
processes is more than available contexts. This fixes issue #6182.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
Commit 109d0569ffd introduced a crash when an error occurred
before ofi_ctxt was allocated, including when no providers
passed the selection logic. Properly check that the pointer
is not NULL in the error cleanup code before dereferencing
the pointer.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
