(http://www.stafford.uklinux.net/libesmtp/) via the --with-esmtp(=DIR)
configure option. Several MCA parameters must be set in order to use
this component:
* notifier_smtp_server: SMTP server IP address or name; must be supplied
* notifier_smtp_port: port to talk to on the server; defaults to 25
* notifier_smtp_to: comma-delimited list of email addresses to send
the mail to; must be supplied
* notifier_smtp_from_name: free-form "name" who the mail is from;
defaults to "Open MPI Notifier"
* notifier_smtp_from_addr: email address from the mail is from; must
be supplied
* notifier_smtp_subject: subject of the mail; defaults to "Open MPI
notifier"
* notifier_smtp_body_prefix: prefix of the body of the mail; defaults
to a sensible value
* notifier_smtp_body_suffix: suffix of the body of the mail; defaults
to a sensible value
Also libesmtp supports SMTP AUTH protocols, this component does not.
If people want/need those kinds of features, they're relatively easy
to add -- I just didn't bother [yet] before I knew if anyone cared.
This commit was SVN r20749.
in the v1.3 section (not the v1.2.5 section -- thanks for noticing,
Tim!). Refs trac:1705 -- this commit should be considered part of that
CMR.
This commit was SVN r20115.
The following SVN revision numbers were found above:
r20096 --> open-mpi/ompi@cad0f41391
The following Trac tickets were found above:
Ticket 1705 --> https://svn.open-mpi.org/trac/ompi/ticket/1705
* Various changes to enable 0-dimensional cartesian communicators:
* Set various mtc_* members to NULL when there are 0 dimensions (and
don't bother trying to memcpy these arrays when duplicating the
communicator -- because they're NULL)
* adjust topo_base_cart_sub to correctly handle 0 dimensions
(simplified it a bit)
* adjust a few error codes to return ERR_OUT_OF_RESOURCE
* adjust error checking of CART_CREATE, CART_RANK
* Allow MPI_GRAPH_CREATE to accept 0 == nnodes.
* Bump reported MPI version in mpi.h to 2.1
This commit was SVN r19461.
The following Trac tickets were found above:
Ticket 1236 --> https://svn.open-mpi.org/trac/ompi/ticket/1236
Update the version of ROMIO to that which was contained in
MPICH2-1.0.7, plus a few patches from the upstream ROMIO maintainers
(because OMPI uses a few code paths in ROMIO that MPICH2 does not;
there were a few compile bugs in the ROMIO from MPICH2-1.0.7).
Added an info MCA param to be able to tell which version of ROMIO is
contained in OMPI: io_romio_version.
Many, many thanks to romio-maint@mcs.anl.gov for all their help in
integrating this new version of ROMIO into Open MPI.
This commit was SVN r19045.
The following Trac tickets were found above:
Ticket 1370 --> https://svn.open-mpi.org/trac/ompi/ticket/1370
is still to use the C based wrapper compilers (which have many more features
and are more well tested). The Perl compilers are enabled with the option
--enable-script-wrapper-compilers, which also ignores the option
--disable-binaries (ie --enable-script-wrapper-compilers --disable-binaries
will result in perl-based wrapper compilers being installed, but no other
binaries being installed).
This commit was SVN r18655.
a standalone library named libopenmpi-malloc. Users wanting to
use leave_pinned with ptmalloc2 will now need to link the library
into their application explicitly. All other users will use the
libc-provided allocator instead of Open MPI's ptmalloc2. This change
may be overriden with the configure option enable-ptmalloc2-internal
- The leave_pinned options will now default to using mallopt on
Linux in the cases where ptmalloc2 was not linked in. mallopt
will also only be available if munmap can be intercepted (the
default whenever Open MPI is not compiled with --without-memory-
manager.
- Open MPI will now complain and refuse to use leave_pinned if
no memory intercept / mallopt option is available.
This commit was SVN r18654.
to *not* use the STL as well as removing the STL use from the error handler
routines. This was removing the STL from the C++ bindings (Solaris has 2
versions of the STL; if OMPI uses one and an MPI application wants to use
another, Bad Things happen).
The main idea is to wrap up the C++ callback function pointers and the user's
extra_state into our own struct that is passed as the extra_state to the C
keyval registration along with the intercept routines in intercepts.cc. When the
C++ intercepts are activated, they unwrap the user's callback and extra state
and call them.
This commit was SVN r17409.
of Fortran datatypes (mpif-common.h) and the list of registered
datatypes: MOOG(REAL2).
Configure and Compilation with ia32/gcc just finished, naturally
without real2.
This commit was SVN r15137.
interface:
- Fix the handling of MPI_BOTTOM in various places
Update of r15030
- While being at it, handle MPI_IN_PLACE in the same way.
Convert OMPI_ADDR -> OMPI_F2C_BOTTOM
Convert OMPI_IN_PLACE -> OMPI_F2C_IN_PLACE
and have them converted before the actual call.
- Approved by George and tested with icc and simple f77 mpi-program and
with program by Daniel.
This commit was SVN r15129.
The following SVN revision numbers were found above:
r15030 --> open-mpi/ompi@15f9e58c68
-I for ${includedir}/openmpi. Solves many problems, and with just a tad
bit of hackery. Don't know why I didn't just do this earlier.
Refs trac:542
This commit was SVN r14853.
The following Trac tickets were found above:
Ticket 542 --> https://svn.open-mpi.org/trac/ompi/ticket/542
Do not initialize them, if not.
If initializing them, check for the correct C-equivalent type
to copy from...
Issue a warning, when a type (e.g. REAL*16) is not available to
build the type (here COMPLEX*32).
This fixes issues with ompi and pacx.
Works with intel-compiler and FCFLAGS="-i8 -r8" on ia32.
This commit was SVN r14818.
The following SVN revision numbers were found above:
r8 --> open-mpi/ompi@e952ab1f88
via the visibility feature that is provided by some compilers.
Per default this feature is disabled, to enable it you need to
configure with --enable-visibility and obviously you need a compiler
with visibility support. Please refer to the wiki for more information.
https://svn.open-mpi.org/trac/ompi/wiki/Visibility
This commit was SVN r14582.
* Remove the connect() timeout code, as it had some nasty race conditions
when connections were established as the trigger was firing. A better
solution has been found for the cluster where this was needed, so just
removing it was easiest.
* When a fatal error (too many connection failures) occurs, set an error
on messages in the queue even if there isn't an active message. The
first message to any peer will be queued without being active (and
so will all subsequent messages until the connection is established),
and the orteds will hang until that first message completes. So if
an orted can never contact it's peer, it will never exit and just sit
waiting for that message to complete.
* Cover an interesting RST condition in the connect code. A connection
can complete the three-way handshake, the connector can even send
some data, but the server side will drop the connection because it
can't move it from the half-connected to fully-connected state because
of space shortage in the listen backlog queue. This causes a RST to
be received first time that recv() is called, which will be when waiting
for the remote side of the OOB ack. In this case, transition the
connection back into a CLOSED state and try to connect again.
* Add levels of debugging, rather than all or nothing, each building on
the previous level. 0 (default) is hard errors. 1 is connection
error debugging info. 2 is all connection info. 3 is more state
info. 4 includes all message info.
* Add some hopefully useful comments
This commit was SVN r14261.
test, Sun's darray test, and an internal LANL test code. I would not
assume it will work properly on other codes, as I'm still not sure I
completely understand what the standard says this function is supposed to
do.
Refs trac:65
This commit was SVN r13967.
The following Trac tickets were found above:
Ticket 65 --> https://svn.open-mpi.org/trac/ompi/ticket/65
configured with --disable-mpi-cxx so that the default -I flags in the
wrapper compilers don't point to a directory that doesn't exist.
Thanks to Martin Audet for identifying the problem.
This commit was SVN r13296.
to the F90 binding for MPI_INITIALIZED was wrong (should have been
logical, not integer).
Fixes trac:782.
This commit was SVN r13170.
The following Trac tickets were found above:
Ticket 782 --> https://svn.open-mpi.org/trac/ompi/ticket/782
timers might natively return nanoseconds instead of microseconds, as is
the case on x86. Fixes an issue with really high shared memory latencies
on Intel macs
This commit was SVN r13038.
* Fix MPI-2 page number in comments for a specific reference in the
spec
* Allow getting/setting the errhandler on MPI_FILE_NULL
* Allow freeing of intrinsic errhandlers, per MPI-2 errata (if you GET
an errhandler on a communicator, you must be able to FREE it, even
if it's an intrinsic).
Thanks to Lisandro Dalcin for reporting these problems.
This commit was SVN r12122.
with the use of MPI_IN_PLACE, and make some optimization checks more
correct. Thanks to Lisandro Dalcin for reporting the problems.
This commit was SVN r11904.
The following Trac tickets were found above:
Ticket 430 --> https://svn.open-mpi.org/trac/ompi/ticket/430
8 bytes. Adjust the configure tests to allow for this case.
Refs trac:427
This commit was SVN r11859.
The following Trac tickets were found above:
Ticket 427 --> https://svn.open-mpi.org/trac/ompi/ticket/427