This commit works around an Oracle C compiler bug in 5.15 (not sure
when it was introduced). The bug is triggered when we chain
assignments of atomic variables. Ex:
_Atomic intptr x, y;
intptr_t z = 0;
x = y = z;
Will produce a compiler error of the form:
operand cannot have void type: op "="
assignment type mismatch:
long "=" void
To work around the issue we are removing the chain assignment and
setting the head and tail on different lines.
Fixes#5814
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit dfa8d3a81ac64e32d2bfb13a9afb20b83d747e03)
On some platfoms reading a 64-bit value is non-atomic and it is
possible that the two 32-bit values are read in the wrong order. To
ensure the tag is always read first this commit reads the tag before
reading the full 64-bit value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 66a7dc4c72cb25df67e7f872bee7a20b5fa9c763)
Get Brian's patch from #5825 and his log message:
Fix a failure in binding the initiating side of a connection
on MacOS. MacOS doesn't like passing the size of the storage
structure (sockaddr_storage) instead of the expected size of
the structure (sockaddr_in or sockaddr_in6), which was causing
bind() failures. This patch simply changes the structure size
to the expected size.
Add a more clear error message in debug mode.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
(cherry picked from commit 9164e26e2f323c43c9a671cb510bb4df03e45628)
Per
https://github.com/open-mpi/ompi/issues/3035#issuecomment-426085673,
it looks like the IP address for a given interface is being stashed in
two places: on the endpoint and on the module.
1. On the endpoint, it is storing the moral equivalent of a
(struct sockaddr_in.sin_addr).
2. On the module, it is storing a full (struct sockaddr_storage).
The call to opal_net_get_hostname() expects a full (struct sockaddr*)
-- not just the stripped-down (struct sockaddr_in.sin_addr). Hence,
when the original code was passing in the endpoint's (struct
sockaddr_in.sin_addr) and opal_net_get_hostname() was treating it
like a (struct sockaddr), hilarity ensued (i.e., we got the wrong
output).
This commit eliminates the call to opal_net_get_hostname() and just
calls inet_ntop() directly to convert the (struct
sockaddr_in.sin_addr) to a string.
NOTE: Per the github comment cited above, there can be a disparity
between the IP address cached on the endpoint vs. the IP address
cached on the module. This only happens with interfaces that have
more than one IP address. This commit does not fix that issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 5dae086f7e4aee28fbb5a7282a2661286a5f68fe)
Remove this component pending re-architecture of the overall OFI
components. We have had similar issues before when multiple components
use the same library - typical issues are race conditions, initialize
and finalize errors, etc. We are seeing similar problems here as we get
broader exposure to different library version and environment
combinations.
The correct fix in the past has been to centralize the library
interactions in a "common" component. We will pursue that here by moving
some additional functions (e.g., endpoint creation) into the existing
opal/mca/common/ofi component. We can't do that and thoroughly test it
in time for the v4.0.0 release, so we'll simply remove this component
from the release.
Once we have things correctly fixed, we'll submit a PR to restore the
component plus the related fixes to some future v4.x release.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Disable async receive for CUDA under OpenIB. While a performance
optimization, it also causes incorrect results for transfers
larger than the GPUDirect RDMA limit. This change has been validated
and approved by Akshay.
References #3972
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
(cherry picked from commit 9344afd485d23c41a18ab57d6df8550826c24b9e)
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
KNC is effectively dead. Remove corresponding SCIF
support in Open MPI.
cherry pick of PR #5737
+
news update
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
(cherry picked from commit b9ac3d8931c38661132544d59be085a50df01420)
Adds device ids of different Broadcom adapters from
BCM57XXX and BCM58XXX family of HCAs.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
(cherry-picked from a53a6f7650035d1644018fd09647c5e4db6b0694)
To ensure fast box entries are complete when processed by the
receiving process the tag must be written last. This includes a zero
header for the next fast box entry (in some cases). This commit fixes
two instances where the tag was written too early. In one case, on
32-bit systems it is possible for the tag part of the header to be
written before the size. The second instance is an ordering issue. The
zero header was being written after the fastbox header.
Fixes#5375, #5638
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 850fbff441756b2f9cde1007ead3e37ce22599c2)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Since openib is on its long, slow way out the door, don't let it
complain about not being able to find any NICs at run time.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 098ec55e37261aee4b9672ec393726c2510247a1)
This commit fixes a bug when using the UCT btl with the UCX memory
hooks disabled. We were misssing a call to
opal_mem_hooks_unregister_release to remove the btl memory hook
callback.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 36c206d2d616578c97853d1d69727a1d6e165c1e)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The write memory barrier was intended to precede setting a fast-box
header but instead follows it. This commit moves the memory barrier to
the intended location.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit dca3516765a4b5927b1877ca59d952baec42bc4a)
Due to decreasing support by vendors/other orgs for the OpenIB BTL,
only look for iWarp/RoCE devices by default. Allow IB HCAs
with ports configured for ethernet.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
OFI BTL uses context for completion but never ask for it in
fi_getinfo(3). This commit makes sure that we always ask for FI_CONTEXT
to eliminate any potential error.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
This commit fixes two bugs in the RMA/atomic emulation code:
1) Fix a fragment leak when using AMO emulation.
2) Always initialize the single-copy emulation code. This is required
to use the AMO support.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The descriptor flags field in a fragment were being ready after the
fragment may have been freed. This commit reads the flags before
calling the user callback.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for atomic operations as well as rdma for
systems without rdma support. This support is implemented using an
internal send tag.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The current cast is *functional*, but isn't really the way it should
be done. This commit makes the cast the way it should be done.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Fix two facepalms:
1. The "uint32" in the hash map functions refer to the *key* size, not
the *value* size. The values are always 64 bits.
2. Pass the straight value to the "set" functions -- not the pointer
to the value.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit changed the way btl/ofi call progress. Before, we force
progression with every rdma/atomic call. This gives performance boost in
some case and slow down on others. Now we only force progression after
some number of rdma calls which result in better performance overall.
Also added new MCA parameter 'mca_btl_ofi_progress_threshold' to set
the threshold number. The new default is 64.
Also:
Added FI_DELIVERY_COMPLETE to tx_rtx flags to ensure that the completion
is generated after the message has been received on the remote side.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
This commit improves the injection rate and latency for RDMA
operations. This is done by the following improvements:
- If C11's _Thread_local keyword is available then always use the
same virtual device index for the same thread when using RDMA. If
the keyword is not available then attempt to use any device that
isn't already in use. The binding support is enabled by default but
can be disabled via the btl_ugni_bind_devices MCA variable.
- When posting FMA and RDMA operations always attempt to reap
completions after posting the operation. This allows us to
better balance the work of reaping completions across all
application threads.
- Limit the total number of outstanding BTE transactions. This
fixes a performance bug when using many threads.
- Split out RDMA and local SMSG completion queue sizes. The RDMA
queue size is better tuned for performance with RMA-MT.
- Split out put and get FMA limits. The old btl_ugni_fma_limit MCA
variable is deprecated. The new variable names are:
btl_ugni_fma_put_limit and btl_ugni_fma_get_limit.
- Change how post descriptors are handled. They are no longer
allocated seperately from the RDMA endpoints.
- Some cleanup to move error code out of the critical path.
- Disable the FMA sharing flag on the CDM when we detect that there
should be enough FMA descriptors for the number of virtual devices
we plan will create. If the user sets this flag we will not unset
it. This change should improve the small-message RMA performance by
~ 10%.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a new btl for one-sided and two-sided. This btl
uses the uct layer in OpenUCX. This btl makes use of multiple uct
contexts and per-thread device pinning to provide good performance
when using threads and osc/rdma. This btl has been tested extensively
with osc/rdma and passes all MTT tests on aries and IB hardware.
For now this new component disables itself but can be enabled by
setting the btl_ucx_transports MCA variable with a comma-delimited
list of supported memory domains/transport layers. For example:
--mca btl_uct_memory_domains ib/mlx5_0. The specific transports used
can be selected using --mca btl_uct_transports. The default is to use
any available transport.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The giant size of the TCP proc struct is causing a problem in some
environments (because it is allocated on the stack), and it was too
big, anyway.
Instead, use a hash map. That way, it starts small and can grow if it
needs to. It also makes no assumptions about the values of the kernel
interface indexes.
Fixes#5292.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit add support for scalable endpoint to enhance multithreaded
application performance. The BTL will detect the support from ofi
provider and will fallback to normal usage of scalable endpoint is not
supported.
NEW MCA parameters:
- mca_btl_ofi_disable_sep: force the btl to not use scalable endpoint.
- mca_btl_ofi_num_contexts_per_module: number of communication context
to create (should be the same as number of thread).
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
FI_MR_UNSPEC is not supposed to be used beyond ofi version 1.5. This
commit replaces FI_MR_UNSPEC with the new FI_MR_BASIC mode bits
(FI_MR_PROV_KEY | FI_MR_ALLOCATED | FI_MR_VIRT_ADDR).
The btl functionality remains the same.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
OFI sockets provider will sometime return FI_EINTR. Apparently this flag
does not exist in OFI version 1.5. This commit added an ifdef check.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
