* Fixes trac:2329 : Improves the error message, and ensures opal-restart will not segv in opal_finalize.
This commit was SVN r25586.
The following Trac tickets were found above:
Ticket 2329 --> https://svn.open-mpi.org/trac/ompi/ticket/2329
to -I the opal/config directory so that autoregen can find our .m4
files.
This commit was SVN r25564.
The following SVN revision numbers were found above:
r25511 --> open-mpi/ompi@5751c45916
supposed to. I.e., half-baked/not complete stuff.
This commit backs out all of r25545. Sorry folks!
This commit was SVN r25546.
The following SVN revision numbers were found above:
r25545 --> open-mpi/ompi@7f9ae11faf
to make MPI_IN_PLACE (and other sentinel Fortran constants) work on OS
X, we need to use the following compiler (linker) flag:
-Wl,-commons,use_dylibs
So if we're compiling on OS X, test to see if that flag works with the
compiler. If so, add it to the wrapper FFLAGS and FCFLAGS (note that
per a future update, we'll only have one Fortran compiler anyway).
Fixes trac:1982.
This commit was SVN r25545.
The following Trac tickets were found above:
Ticket 1982 --> https://svn.open-mpi.org/trac/ompi/ticket/1982
have timer support
* Default timer size should be a long, not an int. Int will roll over way
too fast, with no performance benifit on 64 bit machines...
This commit was SVN r25501.
the previous pack was larger than the allowed space in the pack buffer
bad things happened. Thanks to Yuki MATSUMOTO and Takahiro Kawashima
for the bug report and the patch.
This commit was SVN r25488.
https://svn.open-mpi.org/trac/ompi/wiki/ProcessPlacement
The wiki page is incomplete at the moment, but I hope to complete it over the next few days. I will provide updates on the devel list. As the wiki page states, the default and most commonly used options remain unchanged (except as noted below). New, esoteric and complex options have been added, but unless you are a true masochist, you are unlikely to use many of them beyond perhaps an initial curiosity-motivated experimentation.
In a nutshell, this commit revamps the map/rank/bind procedure to take into account topology info on the compute nodes. I have, for the most part, preserved the default behaviors, with three notable exceptions:
1. I have at long last bowed my head in submission to the system admin's of managed clusters. For years, they have complained about our default of allowing users to oversubscribe nodes - i.e., to run more processes on a node than allocated slots. Accordingly, I have modified the default behavior: if you are running off of hostfile/dash-host allocated nodes, then the default is to allow oversubscription. If you are running off of RM-allocated nodes, then the default is to NOT allow oversubscription. Flags to override these behaviors are provided, so this only affects the default behavior.
2. both cpus/rank and stride have been removed. The latter was demanded by those who didn't understand the purpose behind it - and I agreed as the users who requested it are no longer using it. The former was removed temporarily pending implementation.
3. vm launch is now the sole method for starting OMPI. It was just too darned hard to maintain multiple launch procedures - maybe someday, provided someone can demonstrate a reason to do so.
As Jeff stated, it is impossible to fully test a change of this size. I have tested it on Linux and Mac, covering all the default and simple options, singletons, and comm_spawn. That said, I'm sure others will find problems, so I'll be watching MTT results until this stabilizes.
This commit was SVN r25476.
http://www.open-mpi.org/community/lists/devel/2011/10/9878.php
I am making a final decision to decide the behavior of what happens
when an MCA parameter is re-registered and changes types. In
developer builds (i.e., OPAL_ENABLE_DEBUG==1), a show_help message
will be displayed. In all builds, an error status will be returned.
Specifically, the logic looks like this:
{{{
if (detect_re-registration_with_type_change) {
#if OPAL_ENABLE_DEBUG
opal_show_help(...);
#endif
return OPAL_ERR_VALUE_OUT_OF_BOUNDS;
}
}}}
If someone would like to change this behavior, they are welcome to do
so. :-) I am committing this so that ''some'' action occurs (rather
than talking about the issue and then nothing happens).
This commit was SVN r25432.
handled properly when MCA parameters are re-registered and their types
change. Specifically, this case was broken:
1. Register an int MCA param with a non-zero default value
1. Re-register the same MCA param as a string with a NULL default value
The 2nd step would cause a segv because the first int default value
wasn't being reset properly. Here's sample code that shows the issue:
{{{
{
int ibogus;
char *sbogus;
opal_init(&argc, &argv);
mca_base_param_reg_int_name("type", "name", "help", false, false, 3, &ibogus);
printf("Ibogus: %d\n", ibogus);
mca_base_param_reg_string_name("type", "name", "help", false, false, NULL, &sbogus);
printf("Sbogus: %s\n", (NULL == sbogus) ? "NULL" : sbogus);
exit(0);
}
}}}
This commit fixes the problem from the sample code above as well as
the a similar issue for file-set MCA params and override values. It
also resets default values for MCA params initially registered as a
string but then re-registered as an int.
This commit was SVN r25392.
Use hwloc to obtain the cpuset for each process during mpi_init, and share that info in the modex. As it arrives, use a new opal_hwloc_base utility function to parse the value against the local proc's cpuset and determine where they overlap. Cache the value in the pmap object as it may be referenced multiple times.
Thus, the return value from orte_ess.proc_get_locality is a 16-bit bitmask that describes the resources being shared with you. This bitmask can be tested using the macros in opal/mca/paffinity/paffinity.h
Locality is available for all procs, whether launched via mpirun or directly with an external launcher such as slurm or aprun.
This commit was SVN r25331.
calling main():
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
xxx:~/openmpi-1.5.4/COMPILE-intel-12.1.0> which ompi_info
~/openmpi-1.5.4/COMPILE-intel-12.1.0/usr/bin/ompi_info
xxx:~/openmpi-1.5.4/COMPILE-intel-12.1.0> ompi_info
Segmentation fault
xxx:~/openmpi-1.5.4/COMPILE-intel-12.1.0> gdb usr/bin/ompi_info
...
(gdb) run
Starting program:
...
Program received signal SIGSEGV, Segmentation fault.
opal_memory_ptmalloc2_int_malloc (av=0x7ffff7fe83d8, bytes=4102) at
../../../../../opal/mca/memory/linux/malloc.c:4080
4080 /* remove from unsorted list */
(gdb) where
#0 opal_memory_ptmalloc2_int_malloc (av=0x7ffff7fe83d8, bytes=4102) at
../../../../../opal/mca/memory/linux/malloc.c:4080
#1 0x00007ffff7c232b9 in opal_memory_linux_malloc_hook
(sz=140737354040280, caller=0x1006) at
../../../../../opal/mca/memory/linux/hooks.c:687
#2 0x0000003dd96a6871 in __alloc_dir () from /lib64/libc.so.6
#3 0x0000003ddfa053cd in ?? () from /usr/lib64/libnuma.so.1
#4 0x0000003dd8e0e445 in _dl_init_internal () from /lib64/ld-linux-x86-64.so.2
...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
A lot of combinations and trials have been done, yet to no avail.
Intel v11.0 worked...
Thanks to Hubert Haberstock (Intel) providing the hint in:
http://software.intel.com/en-us/forums/showthread.php?t=87132
This was tested on openmpi-1.5.4 and therefore should
cmr:v1.5
This commit was SVN r25290.
zeroes);
if so, use it for bit-operations like opal_cube_dim and opal_hibit.
Implement two versions of power-of-two.
In case of opal_next_poweroftwo, this reduces the average execution
time from 83 cycles to 4 cycles (Intel Nehalem, icc, -O2, inlining,
measured rdtsc, with loop over 2^27 values).
Numbers for other functions are similar (but of course heavily depend
on the usage, e.g. opal_hibit() with a start of 4 does not save
much). The bsr instruction on AMD Opteron is also not as fast.
- Replace various places where the next power-of-two is computed.
Tested on Intel Nehalem Cluster with openib, compilers GNU-4.6.1 and
Intel-12.0.4 using mpi_testsuite -t "Collective" with 128 processes.
This commit was SVN r25270.
since the 1.4 release (and configure would abort when run with sparc v8), but
the code was left in place. Sparc v9 (32 or 64 bit) are still supported
targets.
This commit was SVN r25258.
1 otherwise. It was doing the opposite, so this patch fixes the
return values. All uses (all in ORTE) used the actual return values,
not the documented values, so fix them as well.
This commit was SVN r25257.
match similar stuff in the event framework; only add CPPFLAGS /
LDFLAGS / LIBS / and WRAPPER_EXTRA_* of the same for the one, single,
winning component (because this framework is compile-time,
one-of-many).
This commit was SVN r25199.
only became evident when there was more than one event component.
The libevent2013 component is still ompi_ignore'd for most developers.
This commit was SVN r25198.
Since hwloc has a dynamic bitmap size, it could actually have bits set
that will not fit in the paffinity mask. We already made sure that we
didn't overrun the paffinity mask; now also set the return value to
OPAL_ERR_VALUE_OUT_OF_BOUNDS (wow, we really thought of everything
with those error codes, eh?) if the hwloc bitmap has bits set higher
than what will fit into the paffinity bitmask.
This commit was SVN r25179.
The following Trac tickets were found above:
Ticket 2854 --> https://svn.open-mpi.org/trac/ompi/ticket/2854
* change components from setting <framework>_base_include to
opal_<framework>_<component>_include; the framework m4 will figure
out the winning component and pick the right "include" shell
variable. Ditto for the other shell variables (cppflags, ldflags,
etc.).
* misc fixes to hwloc/external
* add a bunch of missing "opal_" prefixes to shell variables
* add a few more / update a few comments in framework m4's
This commit was SVN r25174.
maffinity_base_bind_failure_action MCA params to the hwloc base
(hwloc_base_alloc_polocy and hwloc_base_bind_failure_action). Since
these MCA parameters were never on a release branch, I'm just
moving/renaming them outright and not leaving aliases to the old
names.
Note that some upper layer needs to call
opal_hwloc_base_set_process_membind_policy() to set the
set-by-MCA-param process-wide memory affinity policy. We can't do
this automatically during hwloc_base_open() because, for reasons
described elsewhere, opal_hwloc_topology is not automatically filled
during hwloc_base_open() (in short: potential scalability issues when
launching many MPI processes simultaneously on a single machine, for
example).
This commit was SVN r25156.
paffinity/hwloc components were still calling hwloc_topology_init/load
themselves, and not using the opal_hwloc_topology. Doh!
This commit fixes that -- these 2 components no longer have their own
copy of the topology tree; they just use opal_hwloc_topology.
This commit was SVN r25151.
the command line, hwloc is just like any other external dependency
in OMPI: if we find it, we'll use it. If we don't find it, we'll
ignore it. See comments in opal/mca/hwloc/configure.m4 for an
explanation.
* Fix some copy-n-paste errors in opal/mca/hwloc/configure.m4
w.r.t. flags coming in from the winning component.
* Add another line in ompi_info's output about whether hwloc support
is included or not.
This commit was SVN r25134.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
specify btl_tcp_if_include because btl_tcp_if_exclude is defaulted to
the loopback devices.
This commit does a few things:
* Introduce a new OPAL MCA base function:
mca_base_param_check_exclusive_string(). It checks to see that the
''user'' does not set two MCA parameters that are mutually
exclusive by checking the source of those MCS param values.
* Use the above function in many BTLs (and the OOB TCP) to ensure
that <foo>_if_include and <foo>_if_exclude are not both specified
''by the user''.
* Re-arrange many of these BTLs to move their MCA registration code
into a separate component_register() function (vs. the
component_open() function).
This code has been nominally reviewed and checked by Ralph, George,
Terry, and Shiqing.
This commit was SVN r25043.
The following SVN revision numbers were found above:
r24976 --> open-mpi/ompi@8f4ac54336
included a missing ARM directory).
This commit was SVN r24923.
The following SVN revision numbers were found above:
r24875 --> open-mpi/ompi@ceabe91484
It was agreed that opal_init_util had wound up being used in unintended ways, which raised the problem of getting reference counts to work right. However, fixing it would involve more pain than it was worth - and so long as the other layers are made to behave similarly, I have no preference either way.
Complete implementation will follow - for now, this just reverts the prior changes.
This commit was SVN r24886.
The following SVN revision numbers were found above:
r24862 --> open-mpi/ompi@aa92e0c4eb
r24864 --> open-mpi/ompi@a5062385c2
Add a WANT_FT_CR flag different from WANT_FT so tools like *-checkpoint are not built when a different FT technique is requested.
Also fix the C/R thread check so that it is only enabled if C/R is enabled, not generally when threads are enabled.
This commit was SVN r24769.
* Protect the '->bitmap' field if init() is called more than once [it shouldn't be, but if it is then this avoids a memory leak].
* Some new functions
* opal_bitmap_bitwise_and_inplace
* opal_bitmap_bitwise_or_inplace
* opal_bitmap_bitwise_xor_inplace
* opal_bitmap_are_different
* opal_bitmap_get_string
Adding these features to the trunk so others have access to them if they need them. A couple off trunk branches make use of them.
This commit was SVN r24767.
Fix a bug in the new code that prevented the system from correctly matching addresses.
Remove comments in the show-help text indicating that we would continue in the face of incorrect specifications - leave that to the calling layer to decide.
Modify the new opal_ifmatches so it returns error codes letting the caller better understand the result.
Modify the oob to ensure we abort if we don't find interfaces matching specified constraints, and that we do so without multiple error messages.
NOTE: we have a conflict in our standards. We have been using comma-delimited lists of interfaces for all our params. However, one param - opal_net_private_ipv4 - now uses semicolons instead of comma separators. No idea why, but it is confusing.
This commit was SVN r24755.
Interested readers can quench their curiosity either with one
of the Richard Stevens books (ISBN 9780201633467) or the
Wikipedia page (http://en.wikipedia.org/wiki/Subnetwork).
This commit was SVN r24680.
Correctly check the dependencies of MSYS env.
Set up configure include and lib path for building the package.
update a few more CMake scripts.
This commit was SVN r24663.
that enabling "local_only" by default could cause excessive
by-NUMA-node paging and/or OOMs (rather than allowing memory
allocations to spill over to other NUMA nodes).
This brought home the very real-world example of people buying servers
with more processors/cores than they need, just to get more memory.
We wouldn't want Badness to occur in such scenarios by default.
Instead, let people turn on "only allow memory allocations on my local
NUMA node" if their application would benefit from it.
This commit was SVN r24648.
After a long period of development with many starts and stops, we
finally got this where we wanted it.
This commit introduces 2 new MCA params (note that the
"maffinity_libnuma_policy" MCA param introduced by r24290 was removed
when libnuma support was removed). Remember that maffinity policies
are only in effect when paffinity is enaabled -- i.e., when processes
are bound to processors!
* '''maffinity_base_alloc_policy:''' Policy that determines how
general memory allocations are bound after MPI_INIT. A value of
"none" means that no memory policy is applied. A value of
"local_only" means that all memory allocations will be restricted
to the local NUMA node where each process is placed. Note that
operating system paging policies are unaffected by this setting.
For example, if "local_only" is used and local NUMA node memory is
exhausted, a new memory allocation may cause paging.
* '''maffinity_base_bind_failure_action:''' What Open MPI will do if
it explicitly tries to bind memory to a specific NUMA location, and
fails. Note that this is a different case than the general
allocation policy described by maffinity_base_alloc_policy. A
value of "warn" means that Open MPI will warn the first time this
happens, but allow the job to continue (possibly with degraded
performance). A value of "error" means that Open MPI will abort
the job if this happens.
This needs at least a little soak time on the trunk before going to
v1.5.
This commit was SVN r24639.
The following SVN revision numbers were found above:
r24290 --> open-mpi/ompi@afa654746c
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
Upgrade to hwloc 1.2 (from hwloc 1.1.2). This should fix the problems
Nathan's seeing in #2778.
Let's let this soak on the trunk for a little while and see how LANL's
MTT's work out. If that works, then we can CMR this to v1.5.
This commit was SVN r24635.
The following Trac tickets were found above:
Ticket 2778 --> https://svn.open-mpi.org/trac/ompi/ticket/2778
Nth core, so it fell over to try to find the Nth PU.
-----
hwloc isn't able to find cores on all platforms. Example: PPC64
running RHEL 5.4 (linux kernel 2.6.18) only reports NUMA nodes and
PU's. Fine.
However, note that hwloc_get_obj_by_type() will return NULL in 2
(effectively) different cases:
- no objects of the requested type were found
- the Nth object of the requested type was not found
So first we have to see if we can find *any* cores by looking for the
0th core. If we find it, then try to find the Nth core. Otherwise,
try to find the Nth PU.
This commit was SVN r24632.
Rename the memusage sensor plugin to "resusage" as it will soon be updated to include full process stat monitoring.
Extend the heartbeat sensor to report node and process stats in the heartbeat.
Store the process and node stats in their respective orte_xxx_t object.
This commit was SVN r24629.
released):
backport hwloc r 3416 from trunk: Add cache info entry _after_ checking
that we need one, thanks Andriy Gapon for the fix
This commit was SVN r24612.
The following SVN revision numbers were found above:
r3418 --> open-mpi/ompi@9972663a12
--disable-dlopen is used. Thanks to David Gunter for reporting the
issue.
This commit was SVN r24603.
The following Trac tickets were found above:
Ticket 2768 --> https://svn.open-mpi.org/trac/ompi/ticket/2768
appeared multiple times in ompi_info output (so did others, but this
is the one that was noticed). Ensure that we don't repeat
opal_paffinity_base_register_params() multiple times.
This commit was SVN r24569.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
* Convert from AC_TRY_RUN to AC_RUN_IFELSE.
* Excellent suggestion from Paul Hargrove: use AC_CHECK_FUNC to look
for a Linuxthreads-specific symbol when we're cross compiling to
see if threads will have different PIDs (because AC_CHECK_FUNC
works properly even when in cross-compiling environments).
Background: the old/Linuxthreads-based pthreads implementation used
the Linux clone() call to make threads, which effectively meant that
each thread had a different PID. The new NPTL pthreads implementation
does things better, meaning that threads have the same PID.
Open MPI no longer supports threads with different PIDs -- we ripped
out the supporting code for threads with different PIDs because we
don't have systems available to test this on anymore (anyone who still
has such a system can still use older versions of Open MPI). Hence,
configure needs to determine whether the target system will have the
same PID for threads or not -- even if we're cross-compiling. The
current test compiles and runs a multi-threaded app that checks PIDs
of different threads, but we clearly can't do that in a
cross-compiling environment. So use AC_CHECK_FUNC in cross-compiling
environments.
Simple, no?
This commit was SVN r24537.
There was no compelling reason to support such old kernels. Accordingly, convert the test to print a nice error message indicating we no longer support old kernels (but indicate that earlier OMPI versions do) and error out. Remove all code that was protected by "if have different pids" since it can no longer be compiled.
This commit was SVN r24531.
fix will be included in hwloc 1.1.2.
Brad -- can you verify that this fixes the issue for you?
Fixes trac:2732.
This commit was SVN r24450.
The following Trac tickets were found above:
Ticket 2732 --> https://svn.open-mpi.org/trac/ompi/ticket/2732
filenames -- don't include the project name ("opal")
* Don't link maffinity/hwloc and paffinity/hwloc against the common
hwloc in the static build case (because this will result in
duplicate symbols)
This commit was SVN r24447.
hopefully, this now compiles for libnuma 0.9.x and libnuma 2.0.x.
Fixes for the strategy discussed in the commit message for r24442
(i.e., check against numa_get_mems_allowed(), which only exists in
libnuma 2.0.x) and the new new new plan on #2698 coming in a separate
commit.
This commit was SVN r24443.
The following SVN revision numbers were found above:
r24442 --> open-mpi/ompi@90a8fe4aad
(with libnuma-2.0.4 / LIBNUMA_API_VERSION 2): numa_get_run_node_mask
returns a struct bitmask *.
Whether it's a good idea to blindly pass that on to
numa_set_membind() is another matter: one might want to match against
the list returned by numa_get_mems_allowed(), which may be set by the
outside environment.
Refs trac:2698.
This commit was SVN r24442.
The following SVN revision numbers were found above:
r24421 --> open-mpi/ompi@31510e683b
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
Update the CMake script for checking mca subdirs.
Add windows support for __attribute__ packed structures.
Define usleep and posix_memalign with equivalent windows functions.
And a few minor fixes, type casts.
This commit was SVN r24429.
what memory node the process is running on (which is guaranteed to be
a good answer because maffinity won't be invoked unless the process is
already bound to a specific processor), and then bind our memory to
that.
Refs trac:2698.
This commit was SVN r24421.
The following SVN revision numbers were found above:
r24290 --> open-mpi/ompi@afa654746c
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
OMPI supports multiple different repository systems (SVN, hg, git).
But the VERSION file has listed "want_svn" and "svn_r" as fields, even
though the actual repo system and version may not be SVN.
So search/replace those fields (and derrivative values that come from
those fields) with "want_repo_rev" and "repo_rev", respectively.
This commit was SVN r24405.
Add some new proc/job states
Rename a constant to reflect coming change - remove the arbitrary difference between restarting a proc locally and relocating it to another node in terms of the number of restarts allowed.
Add pretty-print of signals for "proc aborted due to signal" reports.
This commit was SVN r24378.
The following SVN revision numbers were found above:
r24371 --> open-mpi/ompi@93d28a5792
This means that the converters (opal_err2str, orte_err2str) can now
return NULL as a "silent error". The return value of opal_err2str_fn_t
is the status of the operation (OPAL_SUCCESS or OPAL_ERROR).
This fixes the "Unknown error" message issues on the trunk.
This commit was SVN r24371.
Temporarily remove hwloc's internal version of myriexpress.h. It is
causing a problem when compiling Open MPI with MX support because
hwloc uses AC_CONFIG_HEADER in hwloc's hwloc.m4 to generate
opal/mca/paffinity/hwloc/hwloc/include/hwloc/config.h.
AC_CONFIG_HEADER apparently has the (undocumented) side effect of
adding -I$(top_builddir)/opal/mca/paffinity/hwloc/hwloc/include/hwloc
to OMPI's compilation flags. Hence, when the OMPI MX components are
compiled and #include "myriexpress.h" (or <myriexpress.h>) they see
hwloc's myriexpress.h before the system one. Badness ensures.
This removal is temporary because we need to figure out a better
solution. But for now, OMPI is not using hwloc's myriexpress.h file --
so it's safe to remove. I'll push this issue upstream to hwloc to
figure out a better solution...
This commit was SVN r24354.
The following Trac tickets were found above:
Ticket 2690 --> https://svn.open-mpi.org/trac/ompi/ticket/2690
Short Version:
--------------
Event engine needs to be flushed so it does not use old/stale file descriptors.
Long Version:
-------------
The problem was that the restarted process was waiting for the socket to the local daemon to finish establishing during the 'sync' operation. The core problem was that the daemon was sending a header of 36 bytes, but the restarted process only received 35 bytes of the message. So the restarted process became stuck waiting for the last byte to arrive.
After many hours of digging, I figured out that the event engine was using the same file descriptor for its evsig_cb functionality (to signal itself when a signal arrives). So when the daemon wrote in to the new fd the event engine was stealing the first byte (*shakes fist at event engine*) before the recv() could be posted.
The solution is to use the event_reinit() function on restart to re-establish the now-stale file descriptors in the event engine. This seems to have fixed the problem.
A few other minor things:
-------------------------
* Add a check to make sure the event engine is balanced in its init/finalize
* Add the opal_event_base_close() to the BLCR restart exec function (still not 100% sure it is needed, but there it is).
This commit was SVN r24296.
last December. :-(
Add new MCA param: maffinity_libnuma_policy. Thanks to David
Singleton for the suggestion. Here's the help text about it:
{{{
MCA maffinity: parameter "maffinity_libnuma_policy" (current value:
<loose>, data source: default value)
Binding policy that determines what happens if memory
is unavailable on the local NUMA node. A value of
"strict" means that the memory allocation will fail;
a value of "loose" means that the memory allocation
will spill over to another NUMA node.
}}}
This commit was SVN r24290.
either direct link to these basic predefined types, or a combination of them.
Anyway, the first items in the datatype list belong to OPAL, the second round
are MPI datatypes created by composing basic OPAL datatypes, and the last
batch are mapped datatype (direct correspondance between an OMPI datatype and
an OPAL one such as int -> int32_t).
Modify the op to fit this new scheme.
This commit was SVN r24247.
the module to use the new hwloc bitmap API (the cpuset API is both
klunkier and deprecated), which simplified a few things.
This commit was SVN r24217.