1
1
Граф коммитов

218 Коммитов

Автор SHA1 Сообщение Дата
George Bosilca
f8ccce7503 One step further.
This commit was SVN r6690.
2005-08-01 17:08:59 +00:00
Brian Barrett
41f7bb3a2a * undo removing of .ompi_unignore file (there is actually a .ompi_ignore
in this directory)

This commit was SVN r6688.
2005-07-29 23:56:48 +00:00
Ralph Castain
4e79a51395 Add a job_info segment to the system that holds a container for each job. Within each container is a keyval indicating the job state (i.e., all procs at stage1, finalized, etc.). This provides a rough state-of-health for the job.
This required a little fiddling with a number of areas. Biggest problem was that it uncovered a potential for an infinite loop to be created in the registry. If a callback function modified the registry, the registry checked the triggers to see if anything had fired. Well, if the original callback was due to a trigger firing, that condition hadn't changed - so the trigger fired again....which caused the callback to be called, which modified the registry, which checked the triggers, etc. etc.

Triggers are now checked and then "flagged" as being "in process" so that the registry will NOT recheck that trigger until all callbacks have been processed. Tried doing this with subscriptions as well, but that caused a problem - when we release processes from a stagegate, they (at the moment) immediately place data on the registry that should cause a subscription to fire. Unfortunately, the system will just hang if that subscription doesn't get processed. So, I have left the subscription system alone - any callback function that modifies the registry in a fashion that will fire a subscription will indeed fire that subscription. We'll have to see if this causes problems - it shouldn't, but a careless user could lock things up if the callback generates a callback to itself.

Also fixed the code that placed a process' RML contact info on the registry to eliminate the leading '/' from the string.

This commit was SVN r6684.
2005-07-29 14:11:19 +00:00
Brian Barrett
6528ee4692 * remove some useless printfs
This commit was SVN r6683.
2005-07-29 00:23:28 +00:00
George Bosilca
8e1f169ffd When we copy a convertor we should copy it's flags too. Otherwise the informations inside will
not match the flags (uninitialized).

This commit was SVN r6681.
2005-07-29 00:17:02 +00:00
George Bosilca
8e0d8a0e99 The datatype should be initialized as soon as possible. Inside we detect the local architecture and
create the local convertor. They will get used on the ompi_proc_init.

This commit was SVN r6680.
2005-07-29 00:15:26 +00:00
George Bosilca
dc2a3d7917 We dont have a .ompi_ignore so I dont see why we have a .ompi_unignore.
This commit was SVN r6679.
2005-07-29 00:14:18 +00:00
George Bosilca
10d95144b6 Add a global local architecture. It is required by the proc.c file as all new procs by default
have the same architecture as the current one.

This commit was SVN r6678.
2005-07-29 00:12:33 +00:00
Brian Barrett
170777d399 * exit on error, not success...
This commit was SVN r6677.
2005-07-29 00:07:52 +00:00
Brian Barrett
cbf04e3d3f * if the frag isn't going to go, reduce the pending frags count, don't
increase it

This commit was SVN r6675.
2005-07-28 22:29:05 +00:00
Jeff Squyres
6e1110188b Allow coll v1 component authors to be lazy in their module_init
functions  (i.e., just return comm->c_coll_selected_module).

This commit was SVN r6668.
2005-07-28 20:31:26 +00:00
George Bosilca
c8bc529df4 The second cut of MX ... still not working yet
This commit was SVN r6666.
2005-07-28 19:53:27 +00:00
Tim Woodall
b2ec71a609 correct for case where eager limit is greater than min_rdma_size
This commit was SVN r6663.
2005-07-28 19:35:47 +00:00
Brian Barrett
5e75cb2495 * properly set unlink thresholds - START/END combined are 1 event
This commit was SVN r6662.
2005-07-28 19:28:04 +00:00
Brian Barrett
7441dfc4c3 fix some printfs
This commit was SVN r6660.
2005-07-28 19:15:07 +00:00
Brian Barrett
8a56cd567f * make poll time 0 so that our latency isn't way too high
* learn to spell...

This commit was SVN r6659.
2005-07-28 18:48:30 +00:00
Brian Barrett
93671ab150 * remove ompi_{ignore,unignire} files
This commit was SVN r6658.
2005-07-28 18:46:46 +00:00
Brian Barrett
05720c099f * use catamount header file
* fix some printfs

This commit was SVN r6654.
2005-07-28 17:09:23 +00:00
Brian Barrett
6cf88caeb4 * remove some unneeded printfs in Portals btl
* add some svn:ignores

This commit was SVN r6653.
2005-07-28 17:04:52 +00:00
Brian Barrett
3f09d5f2a4 * make btl open be safe to call multiple times (btl close already was)
* add btl back into ompi_info.  Since it now directly calls the
  open/close, the missing symbol problems Ralph was seeing when ob1 is
  ignored will not occur.

This commit was SVN r6652.
2005-07-28 16:31:29 +00:00
Rainer Keller
42f23932e0 In part revert 6647, btl_sm_fifo was in repos,
but not in Makefile.am

This commit was SVN r6651.
2005-07-28 16:25:09 +00:00
Brian Barrett
b0b6ddd078 * add --enable-heterogeneous (default: enabled) to enable heterogeneous
support in OMPI.  Currently only enables/disables the architecture
  sharing modex in ob1 pml.
* Add sds framework to ompi_info
* Figure out table ids to use for Portals BTL at configure time, since
  we should use 30 & 31 on Red Storm, but the reference implementation
  only supports 0-8.
* Some bug fixes in Portals UTCP sds

This commit was SVN r6650.
2005-07-28 16:16:13 +00:00
Rainer Keller
29465f0f28 There is no file btl_sm_fifo.h
This commit was SVN r6647.
2005-07-28 15:47:46 +00:00
Galen Shipman
168274db45 Call progress on send schedule so that prepare_src can run if the rdma ack
lands between sending fragments up to rdma_offset. 

This commit was SVN r6646.
2005-07-28 15:38:31 +00:00
Rainer Keller
6b7eb3b2d9 Add btl_sm_endpoint.h
This commit was SVN r6644.
2005-07-28 15:05:16 +00:00
Brian Barrett
052b4d4da4 * only give warning about removing -pedantic and -Wall if we are actually
going to build the component

This commit was SVN r6641.
2005-07-28 06:05:27 +00:00
Jeff Squyres
a7a9196350 There is no such file btl_gm_error.h.
This commit was SVN r6636.
2005-07-28 00:08:36 +00:00
George Bosilca
801037ed6c Migrating MX PTL to the new configure sub-system (shared by both MX BTL and MX PTL).
This commit was SVN r6634.
2005-07-27 23:39:56 +00:00
George Bosilca
94fe5e6ac8 MX BTL use the new configure sub-system.
This commit was SVN r6633.
2005-07-27 23:38:31 +00:00
Brian Barrett
6aa464b67e More changes from Red Storm port
- only call sched_yield if it exists
  - don't fail out if modex doens't work in ob1
  - bunch of fixes for Portals BTL
  - add cnos rml component
  - add NULL gpr component (should only be used if replica AND proxy
    fail to load)  

This commit was SVN r6629.
2005-07-27 23:07:14 +00:00
George Bosilca
9603996a31 Self BTL is working just fine.
This commit was SVN r6624.
2005-07-27 21:46:44 +00:00
Rainer Keller
b9e092a9db There is no btl_mx_error.h, its not included anywhere.
This commit was SVN r6623.
2005-07-27 20:48:19 +00:00
George Bosilca
e1b3758fa5 The first cut for he MX BTL.
This commit was SVN r6621.
2005-07-27 19:46:36 +00:00
Rainer Keller
08d1ab584a See comment in file.
We need to reset the empty-request to the MPI_REQUEST_NULL.

This commit was SVN r6620.
2005-07-27 17:25:12 +00:00
Galen Shipman
758e572ddb Use r_key for prepare_dst
This commit was SVN r6617.
2005-07-27 15:19:08 +00:00
Tim Woodall
a3dbe7687c enable btls
This commit was SVN r6616.
2005-07-27 15:01:05 +00:00
Galen Shipman
aa749499f8 Don't need to remove pedantic flags for openib.
This commit was SVN r6615.
2005-07-27 14:59:41 +00:00
Galen Shipman
115ef95c88 remove ompi_ignore files
add configure.m4 to openib btl and mpool. 

This commit was SVN r6613.
2005-07-27 13:42:37 +00:00
Galen Shipman
f3843bee55 Updated openib btl and mpool to use configure.m4
removed ompi_ignore files from openib btl and mpool. 

This commit was SVN r6612.
2005-07-27 03:38:25 +00:00
Rainer Keller
15c4ae3391 Fix for buglet #1423.
Any non-blocking P2P function should set the request to something else
then MPI_REQUEST_NULL, when passed a source/dest of MPI_PROC_NULL.

Introduce a new ompi_request_empty, which returns the
MPI_SOURCE=MPI_PROC_NULL, MPI_TAG=MPI_ANY_TAG, count=0 as specified by
the MPI-standard.

This commit was SVN r6611.
2005-07-27 01:00:02 +00:00
Brian Barrett
9a83910165 * Change Myrinet/gm btl and mpool to use configure.m4 instead of
configure.stub

This commit was SVN r6608.
2005-07-26 21:56:36 +00:00
Craig E Rasmussen
169d9a33fb Moved MPI_ADDRESS_KIND calculation to configure.ac so that it can go in mpif.h
This commit was SVN r6607.
2005-07-26 17:35:41 +00:00
Galen Shipman
9437cea964 Added support for shared receive queue, note that this is a run-time option
using OMPI_MCA_btl_mvapi_use_srq=1  and is disabled by default. 

This commit was SVN r6602.
2005-07-25 21:15:41 +00:00
Galen Shipman
e33a8205e8 Bugfix and use INLINE flag on send.
This commit was SVN r6600.
2005-07-25 14:57:33 +00:00
Tim Woodall
990c466a9f tuning
This commit was SVN r6595.
2005-07-22 21:33:16 +00:00
Galen Shipman
4c119def85 Misc fixes..
This commit was SVN r6583.
2005-07-21 20:26:17 +00:00
Brian Barrett
a4497238ad * per conversation with Tim, completely drain the Portals event queues each
time through component_progress()

This commit was SVN r6576.
2005-07-21 16:09:13 +00:00
Brian Barrett
0ee12467d6 * implement RDMA put
* remove the recv fragment code, since it really isn't needed
* handle memory descriptor binding a bit more sanely, and use
  thresholds so that Portals does the unlink for us, when it feels
  like it.

This commit was SVN r6575.
2005-07-21 16:06:46 +00:00
Brian Barrett
2faa0d179e * rename a bunch of constants to properly follow prefix rule
* change poll time from 10ms to 0ms.  bad brian
* change eager / min send limits to make ob1 a bit happier

This commit was SVN r6573.
2005-07-21 13:31:52 +00:00
Brian Barrett
ee3530b4bf * add me to gm unignores
This commit was SVN r6572.
2005-07-21 12:37:18 +00:00