Will be replaced by PRRTE. Ensure that OMPI and OPAL layers build
without reference to ORTE. Setup opal/pmix framework to be static.
Remove support for all PMI-1 and PMI-2 libraries. Add support for
"external" pmix component as well as internal v4 one.
remove orte: misc fixes
- UCX fixes
- VPATH issue
- oshmem fixes
- remove useless definition
- Add PRRTE submodule
- Get autogen.pl to traverse PRRTE submodule
- Remove stale orcm reference
- Configure embedded PRRTE
- Correctly pass the prefix to PRRTE
- Correctly set the OMPI_WANT_PRRTE am_conditional
- Move prrte configuration to the end of OMPI's configure.ac
- Make mpirun a symlink to prun, when available
- Fix makedist with --no-orte/--no-prrte option
- Add a `--no-prrte` option which is the same as the legacy
`--no-orte` option.
- Remove embedded PMIx tarball. Replace it with new submodule
pointing to OpenPMIx master repo's master branch
- Some cleanup in PRRTE integration and add config summary entry
- Correctly set the hostname
- Fix locality
- Fix singleton operations
- Fix support for "tune" and "am" options
Signed-off-by: Ralph Castain <rhc@pmix.org>
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
The Open MPI code base assumed that asprintf always behaved like
the FreeBSD variant, where ptr is set to NULL on error. However,
the C standard (and Linux) only guarantee that the return code will
be -1 on error and leave ptr undefined. Rather than fix all the
usage in the code, we use opal_asprintf() wrapper instead, which
guarantees the BSD-like behavior of ptr always being set to NULL.
In addition to being correct, this will fix many, many warnings
in the Open MPI code base.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This commit updates the entire codebase to use specific opal types for
all atomic variables. This is a change from the prior atomic support
which required the use of the volatile keyword. This is the first step
towards implementing support for C11 atomics as that interface
requires the use of types declared with the _Atomic keyword.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the arithmetic atomic operations in opal to
indicate that they return the new value not the old value. This naming
differentiates these routines from new functions that return the old
value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
This commit cleans up code in opal to use OPAL_LIST_FOREACH(_SAFE),
OPAL_LIST_DESTRUCT, and OPAL_LIST_RELEASE.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
There are only five places in the non-daemon code paths where opal_hwloc_topology is currently referenced:
* shared memory BTLs (sm, smcuda). I have added a code path to those components that uses the location string
instead of the topology itself, if available, thus avoiding instantiating the topology
* openib BTL. This uses the distance matrix. At present, I haven't developed a method
for replacing that reference. Thus, this component will instantiate the topology
* usnic BTL. Uses the distance matrix.
* treematch TOPO component. Does some complex tree-based algorithm, so it will instantiate
the topology
* ess base functions. If a process is direct launched and not bound at launch, this
code attempts to bind it. Thus, procs in this scenario will instantiate the
topology
Note that instantiating the topology on complex chips such as KNL can consume
megabytes of memory.
Fix pernode binding policy
Properly handle the unbound case
Correct pointer usage
Do not free static error messages!
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit rewrites both the mpool and rcache frameworks. Summary of
changes:
- Before this change a significant portion of the rcache
functionality lived in mpool components. This meant that it was
impossible to add a new memory pool to use with rdma networks
(ugni, openib, etc) without duplicating the functionality of an
existing mpool component. All the registration functionality has
been removed from the mpool and placed in the rcache framework.
- All registration cache mpools components (udreg, grdma, gpusm,
rgpusm) have been changed to rcache components. rcaches are
allocated and released in the same way mpool components were.
- It is now valid to pass NULL as the resources argument when
creating an rcache. At this time the gpusm and rgpusm components
support this. All other rcache components require non-NULL
resources.
- A new mpool component has been added: hugepage. This component
supports huge page allocations on linux.
- Memory pools are now allocated using "hints". Each mpool component
is queried with the hints and returns a priority. The current hints
supported are NULL (uses posix_memalign/malloc), page_size=x (huge
page mpool), and mpool=x.
- The sm mpool has been moved to common/sm. This reflects that the sm
mpool is specialized and not meant for any general
allocations. This mpool may be moved back into the mpool framework
if there is any objection.
- The opal_free_list_init arguments have been updated. The unused0
argument is not used to pass in the registration cache module. The
mpool registration flags are now rcache registration flags.
- All components have been updated to make use of the new framework
interfaces.
As this commit makes significant changes to both the mpool and rcache
frameworks both versions have been bumped to 3.0.0.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a access_flags argument to the mpool registration
function. This flag indicates what kind of access is being requested:
local write, remote read, remote write, and remote atomic. The values
of the registration access flags in the btl are tied to the new flags
in the mpool. All mpools have been updated to include the new argument
but only the grdma and udreg mpools have been updated to make use of
the access flags. In both mpools existing registrations are checked
for sufficient access before being returned. If a registration does
not contain sufficient access it is marked as invalid and a new
registration is generated.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Enabling the FT code breaks compilation (again). This series
tries to fix the compiler errors. This is again only fixing
the compiler errors without any warranty that the result
might actually support FT again.
This first patch moves orte_cr_continue_like_restart from ORTE
to opal_cr_continue_like_restart in OPAL. This only leaves three
calls from OPAL to ORTE in the FT code. As it is not yet 100%
clear how to handle these calls the code orte_sstore.set_attr()
has been #ifdef'd out for now.
Use of the old ompi_free_list_t and ompi_free_list_item_t is
deprecated. These classes will be removed in a future commit.
This commit updates the entire code base to use opal_free_list_t and
opal_free_list_item_t.
Notes:
OMPI_FREE_LIST_*_MT -> opal_free_list_* (uses opal_using_threads ())
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Please verify your components have been updated correctly. Keep in
mind that in terms of threading:
OPAL_FREE_LIST_GET -> opal_free_list_get_st
OPAL_FREE_LIST_RETURN -> opal_free_list_return_st
I used the opal_using_threads() variant anytime it appeared multiple
threads could be operating on the free list. If this is not the case
update to _st. If multiple threads are always in use change to _mt.
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
structure
This structure member was originally used to specify the remote segment
for an RDMA operation. Since the new btl interface no longer uses
desriptors for RDMA this member no longer has a purpose. In addition
to removing these members the local segment information has been
renamed to des_segments/des_segment_count.
We recognize that this means other users of OPAL will need to "wrap" the opal_process_name_t if they desire to abstract it in some fashion. This is regrettable, and we are looking at possible alternatives that might mitigate that requirement. Meantime, however, we have to put the needs of the OMPI community first, and are taking this step to restore hetero and SPARC support.
These two macros set the prefix for the OPAL and ORTE libraries,
respectively. Specifically, the OPAL library will be named
libPREFIXopen-pal.la and the ORTE library will be named
libPREFIXopen-rte.la.
These macros must be called, even if the prefix argument is empty.
The intent is that Open MPI will call these macros with an empty
prefix, but other projects (such as ORCM) will call these macros with
a non-empty prefix. For example, ORCM libraries can be named
liborcm-open-pal.la and liborcm-open-rte.la.
This scheme is necessary to allow running Open MPI applications under
systems that use their own versions of ORTE and OPAL. For example,
when running MPI applications under ORTE, if the ORTE and OPAL
libraries between OMPI and ORCM are not identical (which, because they
are released at different times, are likely to be different), we need
to ensure that the OMPI applications link against their ORTE and OPAL
libraries, but the ORCM executables link against their ORTE and OPAL
libraries.
Properly setup the opal_process_info structure early in the initialization procedure. Define the local hostname right at the beginning of opal_init so all parts of opal can use it. Overlay that during orte_init as the user may choose to remove fqdn and strip prefixes during that time. Setup the job_session_dir and other such info immediately when it becomes available during orte_init.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
