callbacks to be triggered when memory is about to leave the current
process. The system is designed to allow a variety of interfaces,
hopefully including whole-sale replacement of the memory manager,
ld preload tricks, and hooks into the system memory manager. Since
some of these may or may not be available at runtime and we won't know
until runtime, there is a query funtion to look for availability of
such a setup.
* Added ptmalloc2 memory manager replacement code. Not turned on by
default, can be enabled with --with-memory-manager=ptmalloc2.
Only tested on Linux, not even compiled elsewhere. Do not use
on OS X, or you will never see your process again.
* Added AM_CONDITIONAL for threads test to support ptmalloc2's build
system
This commit was SVN r6790.
support in OMPI. Currently only enables/disables the architecture
sharing modex in ob1 pml.
* Add sds framework to ompi_info
* Figure out table ids to use for Portals BTL at configure time, since
we should use 30 & 31 on Red Storm, but the reference implementation
only supports 0-8.
* Some bug fixes in Portals UTCP sds
This commit was SVN r6650.
load a set of arguments to build OMPI. So you can do something like:
./configure --with-platform=redstorm
and automagically have all 10,000 arguments to configure required
for Red Storm magically set
* change all instances of sinclude to m4_include so that autogen
will properly fail if an .m4 file isn't included properly
This commit was SVN r6648.
the MX BTL and MX PTL, so I decide to have short common options on the "configure --help".
--with-mx = for the base MX directory and
--with-mx-libdir = for the library path.
This commit was SVN r6631.
- only call sched_yield if it exists
- don't fail out if modex doens't work in ob1
- bunch of fixes for Portals BTL
- add cnos rml component
- add NULL gpr component (should only be used if replica AND proxy
fail to load)
This commit was SVN r6629.
* Add ability to completely disable libltdl (the dlopen code to load
dynamic shared objects) to configure: --disable-dlopen
* Added MCA param (component_disable_dlopen) to disable DSO loading
at runtime
* Made the event library behave in some not-completely-erroneous way
on platforms where it has absolutely no eventops support (ie, no
select, poll, or epoll)
* Disabled orte_wait, opal_few, and opal_daemon_init code on
platforms without fork, waitpid support. All non-init functions
will return OPMI_ERR_NOT_SUPPORTED
* Disable orteprobe tool when fork or pipe aren't supported
This commit was SVN r6490.
Red Storm. Add stub functions to ompi_config_bottom.h when they are
around
* Add protection for a bunch of #include <netinet/in.h>s
* Fix up the Portals BTL so that it compiles on Red Storm and has the
right mojo for initialization on Red Storm
* Add some important comments to ompi_check_package and mvapi configures
* Add support for platforms without getpwuid() (aka, Red Storm).
This commit was SVN r6478.
sockaddr_in - seems to be a good indicator)
* disable util/if code if no inet devices (again, no sockaddr_in)
* add enable/disable flag to disable stacktrace pretty-print code
(defaults to enabled). Seems there's something funky going on with
the preprocessor on Red Storm that was causing problems - this was
the easiest fix
* clean up a bunch of the configure.m4 files to remove bogus comments,
properly comment them, fix the dumb logic for happy/unhappy
* Create a macro for testing both header and library for a package,
since we seem to do this kind of test quite often. Handles the
-I and -L search paths properly (including stripping out /usr and
/usr/local if not needed)
* Converted mvapi components to configure.m4, using the nice new
ompi_check_package macro (above)
This commit was SVN r6454.
threads (basically, same as before, but we now link the right thread
libraries).
* Add disable-io-romio flag to disable compiling ROMIO
* Migrathe mvapi btl from configure.stub to configure.m4
This commit was SVN r6453.
components to succeed with --enable-dist. Instead, just add them to
all_components and make dist will still work - we're going to stamp out
the Makefiles no matter what
* Add missing header to ob1 pml for make dist
* Clean up the Portals BTL configure code
This commit was SVN r6413.
frameworks, and components without configure scripts instead of
hard-coded shell variables (for projects and frameworks) and
shell variable building (for components).
* Add 3rd category of component configuration (in addition to configure
scripts and no-configured components): configure.m4 components. These
components can only be built as part of OMPI (like no-configure), but
can provide an m4 file that is run as part of the main configure
script. These macros can set whether the component should be built,
along with just about any other configuration wanted. More care must
be taken compared to configure components, as doing things like setting
variables or calling AC_MSG_ERROR now affects the top-level configure
script (so calling AC_MSG_ERROR if your component can't configure
probably isn't what you want)
* Added support to autogen.sh for the configure.m4-style components,
as well as building up the m4_define lists ompi_mca.m4 now expects
* Updated a number of macros to be more config.cache friendly (both
so that config.cache can be used and so the test can be quickly
run multiple times in the same configrue script):
- ompi_config_asm
- c_weak_symbols
- c_get_alignment
* Added new macros to be shared when configuring components:
- ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...)
- ompi_check_xgrid
- ompi_check_tm
- ompi_check_bproc
* Updated a number of components to use configure.m4 instead of
configure.stub
- btl portals
- io romio
- tm ras and pls
- bjs, lsf_bproc ras and bproc_seed pls
- xgrid ras and pls
- null iof (used by tm)
This commit was SVN r6412.
- After long discussions and ruminations on how we run components in
LAM/MPI, made the decision that, by default, all components included
in Open MPI will use the version number of their parent project
(i.e., OMPI or ORTE). They are certaint free to use a different
number, but this simplification makes the common cases easy:
- components are only released when the parent project is released
- it is easy (trivial?) to distinguish which version component goes
with with version of the parent project
- removed all autogen/configure code for templating the version .h
file in components
- made all ORTE components use ORTE_*_VERSION for version numbers
- made all OMPI components use OMPI_*_VERSION for version numbers
- removed all VERSION files from components
- configure now displays OPAL, ORTE, and OMPI version numbers
- ditto for ompi_info
- right now, faking it -- OPAL and ORTE and OMPI will always have the
same version number (i.e., they all come from the same top-level
VERSION file). But this paves the way for the Great Configure
Reorganization, where, among other things, each project will have
its own version number.
So all in all, we went from a boatload of version numbers to
[effectively] three. That's pretty good. :-)
This commit was SVN r6344.
so that I can next rename all the files under mca/btl using "svn mv" which is
not possible until after the initial "svn mv bmi btl" is checked in.
This commit was SVN r6220.
* If we are on solaris, don't use the system qsort(), as it appears to be
broken in 64 bit mode on Solaris 8 (there are bugs about this in
SunSolve). Instead, use ompi_qsort(), which is taken from FreeBSD.
A #define in ompi_config_bottom.h makes this invisible to most of the
OMPI source tree.
* Fix memory badness in ompi_progress_register where we were reallocing the
array to be number of elements long instead of number of elements *
sizeof(element). Found while using bcheck to track down our problems in
64 bit on big endian machines.
* The debugging output code in session_dir.c could pass NULL as a value for a %s,
which will turn into "(null)" automagically on glibc, but causes segfaults for
older libcs (like those on Solaris). Check for this case in session_dir.c and
don't pass NULL as a %s value into ompi_output().
* Fix missing header file in convertor.c
This commit was SVN r6186.
function names with the GSYM (like we should be)
* Add support for PPC64/Linux in atomics
This should go to the beta branch.
This commit was SVN r6163.
I'm contributing patches for configure.ac and f90_check_type.m4.
The problem was that f90_check_type returned an exit code
and not all compilers actually do this. The fix tries to compile the
type and fails if it can't. The problem is that some compilers will
happily return a default kind if the particular kind is not supported.
So the real test is whether the size of the datatype is as expected.
This commit was SVN r6101.
[10.4] with gfortran 4.0) who need to be able to add flags to compile
simple Fortran executables that use libc routines.
Notably, for Tiger with gfortran 4.0 installed, you'll need to:
./configure F77=gfortran FC=gfortran LIBS=-lSystemStubs
This commit was SVN r5909.
- Fully support REAL*N, INTEGER*N, and COMPLEX*N in the MPI_Op
reduction operations.
- Update ddt to fully support these types as well, to include using
the results of sizes and alignments determined by configure
- Discover the goodness of m4 and consolidate a LOT of configure code
(i.e., remove a lot of essentially duplicated code and
m4-subroutine-ize it). The big kicker was figuring out how to
parameterize AC_DEFINE_UNQUOTED, which you can do if you use m4
properly.
- If we don't support a given INTEGER*N, REAL*N, or COMPLEX*N, don't
error. Just set the right flags so that we don't support them in
the MPI layer.
This commit was SVN r5788.
- Check for icc-8.1 segfaulting with varargs.
- Add check for size of REAL*4,8,16 types and purge,
if smaller
- Fix configure-output with regard to checking for c-types
for the REAL*-types.
This commit was SVN r5661.
biggie), so we gain nothing there. On 10.4, it's implemented directly,
but doesn't support devices (which messes up pty support and IO
forwarding).
This commit was SVN r5621.
for the size. If it does not fit, purge from the list, i.e. reset all
values to zero.
Fixes pgf90 problem, which silently accepts INTEGER*16, but internally
using INTEGER...
This commit was SVN r5594.
Merged in from:
svn merge -r5506:5553 https://svn.open-mpi.org/svn/ompi/tmp/hetero .
This commit was SVN r5552.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r5506
r5553
Merged in from:
svn merge -r5448:5496 https://svn.open-mpi.org/svn/ompi/tmp/hetero .
This commit was SVN r5550.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r5448
r5496
from:
svn merge -r5440:5448 https://svn.open-mpi.org/svn/ompi/tmp/hetero .
This commit was SVN r5549.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r5440
r5448
MPI_COMPLEX*x, and some optional C datatypes in MPI reduction
operations. These types are not technically supported by the letter
of the MPI standard, but are implied by the spirit of it (and there
are definitely users that use them in real applications)
- Add checks in configure for back-end C types for MPI_INTEGER*x and
MPI_REAL*x
- Create C data structs for MPI_COMPLEX*x
- Fixed typo for MPI_INTEGER8 in mpi.h
- Updated configure macros to create MPI_FORTRAN_INTEGER* defines, as
opposed to MPI_FORTRAN_INT, which was causing [me] lots of confusion
(between C "*_INT" names and Fortran "*_INT" names). This caused
some trivial updates in ddt, ompi_info, and the MPI layer to match.
- Update ompi_info to show whether we have each MPI_INTEGER*x,
MPI_REAL*x, and MPI_COMPLEX*x
- Extended reduction operations for optional datatypes:
- "C integer" now includes long long int, long long, and unsigned
long long
- "Fortran integer" now includes MPI_INTEGER*x
- "Floating point" now includes MPI_REAL*x
- "Complex" now includes MPI_COMPLEX*x
This commit was SVN r5511.
we are part of the source tree and not defined otherwise, we are going
with an always defined if ompi_config.h is included policy. If
ompi_config.h is included before mpi.h or before OMPI_BUILDING is set,
it will set OMPI_BUILDING to 1 and enable all the internal code that
is in ompi_config_bottom.h. Otherwise, it will only include the
system configuration data (enough for defining the C and C++ interfaces
to MPI, but not perturbing the user environment).
This should fix the problems with bool and the like that the Eclipse
folks were seeing. It also cleans up some build system hacks that
we had along the way.
Also, don't use int64_t as the default size of MPI_Offset, because it
requires us including stdint.h in mpi.h, which is something we really
shouldn't be doing.
And finally, fix a ROMIO Makefile that didn't set -DOMPI_BUILDING=1,
as ROMIO includes mpi.h, but not ompi_config.h
This commit was SVN r5430.
having it in config/ompi_setup_cxx.m4
2. Adding --enable-coverage option. This will add teh flags -ftest-coverage
and -fprofile-arcs to the flags. Also, one needs to compile with
debug and static only to enable code coverage
3. Adding the coverage flag options to WRAPPER_*_FLAGS so that mpicc and co.,
will add these to teh executables when they are compiled
This commit was SVN r5416.
Monday with Craig:
- split two f90 modules into two separate .f90 files so that
dependencies can be satisfied properly in parallel builds (i.e.,
mpi_kinds.f90 can be compiled and its f90 module can be generated
before any others are compiled, because it is needed by all of the
other f90 source files).
- rename mpi.i.h* to be mpi-f90-interfaces.h, just to be a little more
clear and less name-confusing with mpi.h and mpif.h
- update the build process in src/mpi/f90, including printing out a
warning that compiling mpi.f90 may take quite a while :-\
- update the wrapper compilers to add in the Right Things for
compiling F90 MPI applications
- add a check in configure to find what flag the F90 compiler uses to
identify where f90 module files live
This commit was SVN r5297.
linked into libmpi
* add --enable-mca-direct to specify components that should be directly
called (instead of going through component structs and the like). The
components and component frameworks must explicitly support this.
Currently, only the TEG PML does so.
* Updated all the calls to the PML to use a macro so that they can either
be direct called or called through function pointer interfaces (aka
the component infrastructure)
This commit was SVN r5291.
dimensions the f90 MPI bindings should support (they are strongly
typed, and the number of dimensions of choice arguments must be
specified -- it cannot be arbitrary). The default is four.
Note that even though increasing this value has essentially a linear
effect on the code, the multiplier constant is fairly large (only a
small number of functions have 2 choice buffers, so the exponential
factor is relatively small). Increasing this value increases the
amount of time f90 compilers will spend compiling src/mpi/f90/mpi.f90
(some compilers will crash if it is too big).
This commit was SVN r5268.
more obvious (and documented)
- VERSION now has lots of comments in it
- separate out whether we want the SVN r number in the version and
what the SVN r number is
- clearly describe the process for building the full version number
string
- make ompi info have a separate line item specifically for the SVN r
number, regardless of what the version number is
- update "make dist" process to substitute in the SVN r version
This commit was SVN r5022.
* SPARC Assembly fixes:
- Use SPARC assembly type only when not able to use the SPARC v9
instruction set (instead of previous whenever sizeof(void*) == 4
- Use SPARCV9_32 (aka sparc v8plus) and SPARCV9_64 (aka sparc v9) when
possible. Already were doing so for the 64bit, but on 32bit we
were falling back to SPARC.
- Implemented SPARCV9_32 atomic operations
- Emit warning if user is going to get SPARC atomic, as that probably
isn't what the user wants for best performance.
* Started shell of MIPS assembly. Does not work, but wanted something
so that everyone would only have to re-autogen once today....
This commit was SVN r4465.
threads (defaults to use MPI threads, disable progress threads). This
allows us to have MPI threaded support, but without progress threads
and all that fun stuff.
This commit was SVN r4443.
the test barfs on AIX, since it has some strange non-mangling of the
labels in the inline assembly that all the other platforms seem to be
ok making right. *sigh*
This commit was SVN r4365.
script in components and distributes them as appropriate throughout
the tree (previously, we only did WRAPPERS_* flags). These flags are
*only* used when libmpi is being build statically (--disable-shared
--enable-static).
I also added another classification of flags -- LIBMPI_ALWAYS_* and
WRAPPERS_ALWAYS_* for flags that should always be added to the libmpi
/ wrapper linker lines, not just when compiling libmpi statically.
This commit was SVN r4322.
test for the pthread-library fails, due to pthread_t th
not being initialized.
Fix remaining warnings (hopefully correctly casted).
Spelling buglet in help-output for mpirun
This commit was SVN r4272.
looks like we need to do the same thing for UltaSparc / MIPS machines
* The atomic_cmpset_64 bit code made some assumptions about calling
convention that wouldn't be true if the function was inlined. Fix
those assumptions, so we should work fine whether GCC inlines
the function or not.
This commit was SVN r4249.
of assembler format
* Fix minor bugs in AMD64, PPC, and IA32 assembly for atomic operations
* Clean up the #defines to look for when examining level of atomic operation
support
This commit was SVN r4183.
from themselves -- but doesn't look valid. For example, it's legal to
have $FC and $F77 to both be ifort (intel fortran compiler).
This commit was SVN r4148.
Note: in bringing this across, I have obeyed the mca-prefix-rule in defining functions and variables. However, I left the name of the component call as "orte_errmgr.xxx" so that any use of the code will directly "merge" with the new RTE branch without changes.
This commit was SVN r4099.
which was resulting in the pthreads functions never getting linked in.
Which would cause false positives on the threading tests. Make sure
that there is a call chain from main() -> pthread_create(), which should
be enough to make the test happy.
This commit was SVN r3998.
the src/mca/soh/base/*.c files out of the default build because
they're uncompilable right now -- don't want to step on any of Ralph's
local changes.
This commit was SVN r3837.
#if OMPI_WANT_MPI2_ONE_SIDED and some automake conditionals. Also had
to add some AC_SUBSTs to eliminate part of mpif.h (otherwise the
"external" statements would have made undefined symbols).
All the MPI-2 one-sided functionality (including the skeleton
top-level MPI API functions that only invoke an MPI exception) can be
re-enabled with --enable-mpi2-one-sided.
This commit was SVN r3802.
the Open MPI tree. This fixes bug 1015.
- Eliminate some confusion/inconsistencies through the tree; we only
use MCA_<type>_<name>_VERSION now, not ..._FULL_VERSION
- coll demo component is ready
- ROMIO io component had a VERSION file but wasn't using it, so now
it's using it properly
- Updated autogen.sh and mca_make_configure.pl to generate version
header templates upon demand
This commit was SVN r3267.
If set to 1, the relevant .m4 files will be copied to the component
directory, allowing "make dist" to fully bundle up everything needed
to build the component (thereby allowing the distribution tarball to
be built outside the Open MPI tree).
This commit was SVN r3258.
have some nasty side effect we don't know about, make it a configure
option for now. Also add a harmless signal handler to the pcm open
(since pcm_open will have a signal handler eventually for SIGCHLD, I
think). Use --enable-event-signals / --disable-event-signals to
control behavior.
This commit was SVN r2748.
to the docs in src/utl/output.h from the last commit, might as well do
this one. No real rush to update to this, but you'll need to
re-autogen.sh, etc.
Fixes an old, small bug that caused the static-components.h files to
always be regenerated, even if they didn't change. This caused
several files to be unnecessarily recompiled if you ran the following:
./configure
make
./configure
make
Granted, this is a small error, but a) we have it Right in other
places, b) AC does the Right things for AC_CONFIG_HEADER, so we should
do the Right things too.
This commit was SVN r2638.
Ensure that OMPI_F77_* are always defined, even if a) a f77 compiler
is not found, or b) the user disables the f77 MPI bindings.
This commit was SVN r2618.
mojo in common/*/Makefile.am files. Also don't traverse into
src/mca/common and don't snarf the common convenience library if we're
not building staticly (remember: there is no "base" in common).
This commit was SVN r2323.
* add env pcmclient, which builds client data out of environment variables
* improved rsh infrastructure a little bit - almost able to get to calling
fork()
* Removed instance information for llm - it should be burried in the pcm,
not exposed
*** YOU MUST RUN AUTOGEN / CONFIGURE / etc AFTER UPDATING ***
This commit was SVN r2191.
because "svnversion" may emit a version number with ":" in it (duh!).
This fixes the problem where, depending on the status of your svn
checkout, you could get a string in a MAJOR version number instead of
an integer (i.e., "1234M" instead of "10"). This was caused by
extraneous ":" in the output, causing autogen.sh to grab the wrong
field.
This commit was SVN r1991.
horizontal integration
- Move the mpool_sm_mmap.[ch] files to a new sm common code area, and
rename to common_sm_mmap.[ch]
- update sm ptl and mpool to refer to the sm common code area for the
mmap code
This commit was SVN r1930.
from the "LAM/MPI" -> "Open MPI" name change that didn't convert
properly. So this commit fixes all instances of "OMPI/MPI" to "Open
MPI".
This commit was SVN r1924.
* Add hostfile component for the LLM (reads hostfiles, returns array of
node identifiers
NOTES:
- This will require the full autogen / configure / make.
- You now need flex to build Open MPI from Subversion. The versions
available on most Linux boxen and OS X is more than new enough. You
do *not* need flex to build from a nightly or release tarball.
This commit was SVN r1890.
code base.
- many (most) mca type names have "component" or "module" in them,
as relevant, just to further distinguish the difference between
component data/actions and module data/actions. All developers
are encouraged to perpetuate this convention when you create
types that are specific to a framework, component, or module
- did very little to entire framework (just the basics to make it
compile) because it's just about to be almost entirely replaced
- ditto for io / romio
- did not work on elan or ib components; have to commit and then
convert those on a different machine with the right libraries and
headers
- renamed a bunch of *_module.c files to *_component.c and *module*c
to *component*c (a few still remain, e.g., ptl/ib, ptl/elan, etc.)
- modified autogen/configure/build process to match new filenames
(e.g., output static-components.h instead of static-modules.h)
- removed DOS-style cr/lf stuff in ns/ns.h
- added newline to end of file src/util/numtostr.h
- removed some redundant error checking in the top-level topo
functions
- added a few {} here and there where people "forgot" to put them in
for 1 line blocks ;-)
- removed a bunch of MPI_* types from mca header files (replaced with
corresponding ompi_* types)
- all the ptl components had version numbers in their structs; removed
- converted a few more elements in the MCA base to use the OBJ
interface -- removed some old manual reference counting kruft
This commit was SVN r1830.
- Updated autogen.sh and friends to be more flexible and allow
components to be configured and built outside of the Open MPI tree
- Removed $(LIBOMPI_LA) from all component Makefile.am's -- it's
unnecessary
This commit was SVN r1566.
--disable-mca-dso to build MCA components statically as part of
libmpi, or --enable-mca-dso=LIST to only build some components as DSOs
(see ./configure --help for more details).
This commit was SVN r1521.
real commit of the collectives. MPI_SCAN and MPI_EXSCAN are still not
implemented, but lots of other things are in the critical path and
holding up other people, so it's ok to commit without them:
- better checks for sizes in configure, and add defaults for fortran
sizes if we don't have a fortran compiler
- fix some logic that was accidentally broken for size checks for the
file type offset_t
- add some C equivalent types for fortran's complex and double complex
(for use in internal reduction/op functions)
- additionals and slight reorganization of ompi_mpi_init()
ompi_mpi_finalize()
- fully implement all top-level MPI collective calls, including all
param checking for both intra- and inter-communicators (woof)
- change the communicator_t type for stuff that we need in coll, and
update all references throughout the code base to match
- all kinds of updates to the coll framework base
- next cut of the basic coll module -- has all intracommunicator
collectives implemented except scan and exscan (see note above).
All intercommunicator functions return ERR_NOT_IMPLEMENTED.
- MPI_Op is a fixed implementation -- not component-ized yet. So
there are generic C loops for all implementations.
This commit was SVN r1491.
- moved mem/free_list.h to class/ompi_free_list.h
- moved mem/malloc.h to util/malloc.h
- added src/mca/mpool component type
This commit was SVN r1274.
flags to LAM_WANT_F77_BINDINGS and LAM_WANT_F90_BINDINGS. Also
changed the compiler flag for the Fortran 90/95/whatever compiler to
FCFLAGS to match what AC was already doing.
This commit was SVN r996.
"{version}svn" instead of assigning a potentially meaningless SVN r
number (because the developer's copy may not be entirely consistent
with that r number)
This commit was SVN r993.
new config.guess/config.sub files (!), but a) the code is smart enough
to know this, and b) when they become available again, the Right
Things will happen.
Also, I left the example code in there how to add man pages to the
relevant Makefile's on the thought that we'll need it when we
eventually get around to making man pages (assumedly through
doxygen).
This commit was SVN r985.
- Add THREAD_*FLAGS to all the relevant places
- Propagate THREAD_*FLAGS to the wrappers
- Add src/mpi/win/Makefile to AC_OUTPUT
This commit was SVN r868.
MPI_PARAM_CHECK, intended to be used as
if (MPI_PARAM_CHECK) {
/* ...do MPI param checks in here... */
}
MPI_PARAM_CHECK will be 0, 1, or lam_mpi_param_check.
This commit was SVN r785.
speed of autogen.sh and configure: find modules that don't need to have
a separate configure script during autogen.sh and set them up to be
part of LAM's build process. This means that we don't have to run the GNU
tools nearly as much during autogen.sh and that we don't have to run
nearly as many sub-configure scripts during configure.
This works fine for statically-built MCA modules, but doesn't seem to work
properly yet for dynamically-built modules. More coming soon, but I wanted
to get this in for others to use.
This commit was SVN r756.
- Add --enable-mem-debug to enable/disable aux functions for malloc/free
(i.e., ditch LAM_MALLOC/LAM_FREE and simply #define malloc and free to be
lam_malloc/lam_free)
This commit was SVN r671.
- always build src/libmpi.la (may contain all of liblam)
- sometimes build src/liblam.la
- ensure libwhatever is build before traversing src/tools
This commit was SVN r487.
to relative libraries -- need these to be variables because configure may
decide to compile them both as libmpi (and therefore there is no libmpi).
Correct usage is to use *ONE* of these two macros when adding it to LIBADD
lines in Makefile.am's -- if you use $(LIBMPI_LA), it will automatically
include liblam if it needs it.
This commit was SVN r400.
Rather trying to reinvent this very complex macro, take the easy way
out: Create a real lam_stdint.h which includes stdint.h, inttypes.h or
sys/types.h when possible, and otherwise uses SIZEOF_ macros generated
by configure to fill in the undefined types. A little more work for
cpp if stdint.h is not present.
This commit was SVN r136.
