To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
Add some debug to nidmap
Ensure that the HNP's node name is not included in the regex when launching via rshbase as that node is automatically included in the daemon map.
This commit was SVN r25063.
Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again.
Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines.
This commit was SVN r24860.
Everyone will be starting at MIN anyway (until we implement restart of course)
so there's no reason to set the epoch to INVALID and then immediately reset them
to MIN. This way there's less room to make mistakes later.
This commit was SVN r24829.
So separate out the printing of that key, and let the individual procs generate it in a way that ensures they all get the same result.
This commit was SVN r24646.
Provide a new MCA param that allows the user to direct that we abort the job once a process exits with non-zero status. No recovery is allowed in such cases to avoid trying to restart a process that has already exited MPI.
This commit was SVN r24614.
* If something goes wrong during ompi_mpi_init, don't erroneously
report that it is illegal to invoke MPI_INIT* before MPI_INIT
* Aggregate help messages when possible when something goes wring
during ompi_mpi_init
This commit was SVN r24492.
When called, each mapper checks to see if it can map the job. If npernode is provided, for example, then the loadbalance mapper accepts the assignment and performs the operation - all mappers before it will "pass" as they can't map npernode requests.
Also remove the stale and never completed topo mapper.
This commit was SVN r24393.
Add some new proc/job states
Rename a constant to reflect coming change - remove the arbitrary difference between restarting a proc locally and relocating it to another node in terms of the number of restarts allowed.
Add pretty-print of signals for "proc aborted due to signal" reports.
This commit was SVN r24378.
The following SVN revision numbers were found above:
r24371 --> open-mpi/ompi@93d28a5792
This means that the converters (opal_err2str, orte_err2str) can now
return NULL as a "silent error". The return value of opal_err2str_fn_t
is the status of the operation (OPAL_SUCCESS or OPAL_ERROR).
This fixes the "Unknown error" message issues on the trunk.
This commit was SVN r24371.
It is statically initialized to the real back-end OPAL show_help
function. During orte_show_help_init(), the variable is re-assigned
with the value of the back-end ORTE show_help function (the one that
does error message aggregation).
Therefore, anything that calls opal_show_help() after a certain point
in orte_init() will have their show_help messages be aggregated.
w00t! Even code down in OPAL -- that has no knowledge of ORTE -- will
have their messages aggregated. '''Double w00t!'''
During orte_show_help_finalize(), we restore the original pointer
value so that it something calls opal_show_help() after
orte_finalize(), it'll still work properly (but it won't be
aggregated).
This commit was SVN r24185.
Fix off-by-one error when /dev/urandom doesn't exist. Thanks to "pth"
for the patch.
This commit was SVN r24170.
The following Trac tickets were found above:
Ticket 2651 --> https://svn.open-mpi.org/trac/ompi/ticket/2651
Point the recv thread event base to the right place so it can wakeup when required.
Add a new error code for "comm disabled" when attempting to communicate after disabling comm.
This commit was SVN r24129.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
as orte_show_help(), but it takes a fully-rendered string instead of a
varargs list that must be rendered. This function is useful in cases
where one entity renders the "show help" string and a different entity
sends the string via the normal orte "show help" mechanisms for
aggregation, etc.
Example usage: errors occur in the ODLS after forking but before
exec'ing. In such cases, it makes sense for the the child process to
render the "show help" string because it has all the details about the
error. But the child process can't call orte_show_help() itself
because it is not an ORTE process -- it can't OOB send the message
to the HNP, etc.
After rendering the help string, the child sends the rendered string
to its parent via normal IPC (e.g., via a pipe) and the parent can
then invoke orte_show_help_norender() with the ready-to-go string.
The message then displays out via the normal mechanisms (i.e., out via
the HNP, aggregated/coalesced, etc.).
This commit was SVN r23651.
orte_local_chip_type and orte_local_chip_model in MPI processes it the
appropriate sysinfo module found the values on the machine.
This commit was SVN r23581.
This required modification of the errmgr.update_state API so the pid could be passed in to the function that could update the proper data record(s). All calls to that API have been updated as well, but I obviously couldn't test them all.
Thanks to Dong Ahn (LLNL) for catching this problem!
Also fixed debugger daemon cospawn, both for initial launch and attach-while-running modes. Tested and verified on rsh and slurm.
This commit was SVN r23300.
* Remove OPAL_ERR_PAFFINITY_NOT_SUPPORTED; fit it into the generic
OPAL_ERR_NOT_SUPPORTED case.
* When odls_default detects that processor affinity is not supported,
it prints a specific message about it, and then it suppressed a
generic HNP help message that would normally follow it (i.e., it's
easier to have the "processor affinity is not supported" show_help
message last).
* Use some symbolic names in odls_default instead of fixed int's,
just for slight readability improvements in the code.
* Introduce orte_show_help_suppress(), which gives the ability to
suppress any future showings of any arbitrary show_help() message.
This is useful if you display message X and want to suppress
message Y. This suppression *only* works in environments where
orte_show_help() does coalescing.
This commit was SVN r23249.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
Add new mca params to test:
orte_debugger_test_daemon: Name of the executable to be used to simulate a debugger colaunch
orte_debugger_test_attach: Test debugger colaunch after debugger attachment
To test co-launch at job start, just set the orte_debugger_test_daemon param.
To test co-launch upon attach:
set orte_debugger_test_daemon
set orte_debugger_test_attach=1
set orte_enable_debug_cospawn_while_running=1
set orte_debugger_check_rate=<N> - defines the number of seconds to wait before "checking" for a debugger attaching
Added a "debugger" program to orte/test/mpi that just spins to simulate a debugger daemon.
This commit was SVN r23144.
he errmgr framework so that it can decide how to respond - which for now at least is just to check for lifeline and abort if so.
Add a new error constant to indicate that the error is "unrecoverable" so the oob can know it needs to abort.
This commit was SVN r23112.
