1
1
Граф коммитов

27 Коммитов

Автор SHA1 Сообщение Дата
Ralph Castain
37dfdb76eb Here is the major MAD-cure commit. I have written plenty about it, so I refer you here to those messages for a description of everything that was done.
This commit was SVN r11661.
2006-09-14 21:29:51 +00:00
George Bosilca
f52c10d18e And ORTE is ready for prime-time. All Windows tricks are in:
- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.

Plus a full implementation for the orte_wait functions.

This commit was SVN r11347.
2006-08-23 03:32:36 +00:00
George Bosilca
6afa4c6c64 Windows friendly version. We have to split the OMPI_DECLSPEC in at least 3
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.

This commit was SVN r11270.
2006-08-20 15:54:04 +00:00
Ralph Castain
5dfd54c778 With the branch to 1.2 made....
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).

Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).

I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).

In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...

Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.

This commit was SVN r11204.
2006-08-15 19:54:10 +00:00
Ralph Castain
bc7690bcb0 Fix the bproc allocator. This is just a bandaid for 1.x that will be fixed more thoroughly in 2.0.
Basically, the problem was that the allocator was grabbing everything on the cluster for which the user had access privilege. Thus, if a user had two sessions operable, each with its own allocation, mpirun in each session would grab both sets of nodes and use them. Not very polite.

This commit was SVN r10683.
2006-07-06 18:31:14 +00:00
Jeff Squyres
018a4b98ff - Ensure that "context" is initialized to NULL
- Ensure that we don't free a NULL context
- Add a few {}'s

This commit was SVN r9055.
2006-02-16 04:09:29 +00:00
David Daniel
ff7a2c7967 Fixes for BJS (broken since merge)
This commit was SVN r9043.
2006-02-15 01:14:50 +00:00
Brian Barrett
566a050c23 Next step in the project split, mainly source code re-arranging
- move files out of toplevel include/ and etc/, moving it into the
    sub-projects
  - rather than including config headers with <project>/include, 
    have them as <project>
  - require all headers to be included with a project prefix, with
    the exception of the config headers ({opal,orte,ompi}_config.h
    mpi.h, and mpif.h)

This commit was SVN r8985.
2006-02-12 01:33:29 +00:00
Jeff Squyres
42ec26e640 Update the copyright notices for IU and UTK.
This commit was SVN r7999.
2005-11-05 19:57:48 +00:00
Jeff Squyres
0629cdc2d7 Bring back the changes from /tmp/jjhursey-rmaps. Specific merge
command:

svn merge -r 7567:7663 https://svn.open-mpi.org/svn/ompi/tmp/jjhursey-rmaps .

(where "." is a trunk checkout)

The logs from this branch are much more descriptive than I will put
here (including a *really* long description from last night).  Here's
the short version:

- fixed some broken implementations in ras and rmaps
- "orterun --host ..." now works and has clearly defined semantics
  (this was the impetus for the branch and all these fixes -- LANL had
  a requirement for --host to work for 1.0)
- there is still a little bit of cleanup left to do post-1.0 (we got
  correct functionality for 1.0 -- we did not fix bad implementations
  that still "work")
  - rds/hostfile and ras/hostfile handshaking
  - singleton node segment assignments in stage1
  - remove the default hostfile (no need for it anymore with the
    localhost ras component)
  - clean up pls components to avoid duplicate ras mapping queries
  - [possible] -bynode/-byslot being specific to a single app context 

This commit was SVN r7664.
2005-10-07 22:24:52 +00:00
Andrew Friedley
555ae37255 Add lib{opal,orte,mpi}.la to appropriate LIBADD's, some whitespace cleanup as well.
This commit was SVN r7477.
2005-09-22 12:28:54 +00:00
Tim Woodall
29d14281c8 use the specified host names (if provided)
This commit was SVN r7442.
2005-09-20 13:33:11 +00:00
Brian Barrett
ed56e743b7 * update configure.ac to use the modern version of AC_INIT and
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
  number to be set at autoconf time (instead of at configure time, as
  it was before).  Set the version number, minus the subversion r number,
  at autoconf time.  Override the internal variables to include the r
  number (if needed) at configure time.  Basically, the right thing
  should always happen.  The only place it might not is the version
  reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
  them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
  in the directory containing source files, even if the Makefile.am is
  in another directory.  This should start making it feasible to
  reduce the number of Makefile.am files we have in the tree, which
  will greatly reduce the time to run autogen and configure.

This commit was SVN r7211.
2005-09-07 05:54:53 +00:00
Josh Hursey
22c7f2b3e0 Quite a range of small changes.
ns_replica.c
 - Removed the error logging since I use this function in orte_init_stage1 to 
   check if we have created a cellid yet or not.

ras_types.h & rase_base_node.h
 - This was an empty file. moved the orte_ras_node_t from base/ras_base_node.h
   to this file.
 - Changed the name of orte_ras_base_node_t to orte_ras_node_t to match the 
   naming mechanisms in place.

ras.h
 - Exposed 2 functions:
   - node_insert:
     This takes a list of orte_ras_base_node_t's and places them in the Node 
     Segment of the GPR. This is to be used in orte_init_stage1 for singleton 
     processes, and the hostfile parsing (see rds_hostfile.c). This just puts 
     in the appropriate API interface to keep from calling the 
     orte_ras_base_node_insert function directly.
   - node_query:
     This is used in hostfile parsing. This just puts in the appropriate API 
     interface to keep from calling the orte_ras_base_node_query function 
     directly.
 - Touched all of the implemented components to add reference to these new 
   function pointers

ras_base_select.c & ras_base_open.c
 - Add and set the global module reference

rds.h
 - Exposed 1 function:
   - store_resource:
     This stores a list of rds_cell_desc_t's to the Resource Segment. 
     This is used in conjunction with the orte_ras.node_insert function in 
     both the orte_init_stage1 for singleton processes and rds_hostfile.c

rds_base_select.c & rds_base_open.c
 - Add and set the global module reference

rds_hostfile.c
 - Added functionality to create a new cellid for each hostfile, placing 
   each entry in the hostfile into the same cellid. Currently this is 
   commented out with the cellid hard coded to 0, with the intention of 
   taking this out once ORTE is able to handle multiple cellid's
 - Instead of just adding hosts to the Node Segment via a direct call to 
   the ras_base_node_insert() function. First add the hosts to the Resource 
   Segment of the GPR using the orte_rds.store_resource() function then use 
   the API version of orte_ras.node_insert() to store the hosts on the Node 
   Segment.
 - Add 1 new function pointer to module as required by the API.

rds_hostfile_component.c
 - Converted this to use the new MCA parameter registration

orte_init_stage1.c
 - It is possible that a cellid was not created yet for the current environment. 
   So I put in some logic to test if the cellid 0 existed. If it does then 
   continue, otherwise create the cellid so we can properly interact with the 
   GPR via the RDS.
 - For the singleton case we insert some 'dummy' data into the GPR. The RAS 
   matches this logic, so I took out the duplicate GPR put logic, and 
   replaced it with a call to the orte_ras.node_insert() function.
 - Further before calling orte_ras.node_insert() in the singleton case, 
   we also call orte_rds.store_resource() to add the singleton node to the 
   Resource Segment.

Console:
 - Added a bunch of new functions. Still experimenting with many aspects of the
   implementation. This is a checkpoint, and has very limited functionality.
 - Should not be considered stable at the moment.

This commit was SVN r6813.
2005-08-11 19:51:50 +00:00
Tim Prins
5a4f8a257d - enabled new bproc components
- added support for Scyld bproc and old LANL bproc

This commit was SVN r6674.
2005-07-28 22:28:38 +00:00
Tim Prins
384639c5cc - more build system updates for bproc
This commit was SVN r6609.
2005-07-26 22:12:03 +00:00
Tim Prins
70587299f3 - respect configure options --without-bproc and --with-bproc=no
- check for a recent version of LANL bproc by looking for sys/bproc_common.h

This commit was SVN r6596.
2005-07-22 22:41:35 +00:00
Tim Woodall
d52252065d - dont require NODES environment variable
- ignore existing nodes that aren't valid

This commit was SVN r6488.
2005-07-14 15:40:30 +00:00
Brian Barrett
4d580fa706 * disable TCP ptl and oob components if there is no TCP support (look at
sockaddr_in - seems to be a good indicator)
* disable util/if code if no inet devices (again, no sockaddr_in)
* add enable/disable flag to disable stacktrace pretty-print code
  (defaults to enabled).  Seems there's something funky going on with
  the preprocessor on Red Storm that was causing problems - this was
  the easiest fix
* clean up a bunch of the configure.m4 files to remove bogus comments,
   properly comment them, fix the dumb logic for happy/unhappy
* Create a macro for testing both header and library for a package, 
  since we seem to do this kind of test quite often.  Handles the
  -I and -L search paths properly (including stripping out /usr and
  /usr/local if not needed)
* Converted mvapi components to configure.m4, using the nice new
  ompi_check_package macro (above)

This commit was SVN r6454.
2005-07-13 04:16:03 +00:00
Brian Barrett
6e4f33e48c * after careful consideration, there's really no reason to force config.m4
components to succeed with --enable-dist.  Instead, just add them to
  all_components and make dist will still work - we're going to stamp out
  the Makefiles no matter what
* Add missing header to ob1 pml for make dist
* Clean up the Portals BTL configure code

This commit was SVN r6413.
2005-07-10 01:09:31 +00:00
Brian Barrett
a991d883c1 * Rewrite ompi_mca.m4 to use m4_defined lists of projects (ompi, orte, etc.),
frameworks, and components without configure scripts instead of
  hard-coded shell variables (for projects and frameworks) and 
  shell variable building (for components).
* Add 3rd category of component configuration (in addition to configure
  scripts and no-configured components): configure.m4 components.  These
  components can only be built as part of OMPI (like no-configure), but
  can provide an m4 file that is run as part of the main configure
  script.  These macros can set whether the component should be built, 
  along with just about any other configuration wanted.  More care must
  be taken compared to configure components, as doing things like setting
  variables or calling AC_MSG_ERROR now affects the top-level configure
  script (so calling AC_MSG_ERROR if your component can't configure
  probably isn't what you want)
* Added support to autogen.sh for the configure.m4-style components,
  as well as building up the m4_define lists ompi_mca.m4 now expects
* Updated a number of macros to be more config.cache friendly (both
  so that config.cache can be used and so the test can be quickly
  run multiple times in the same configrue script):
    - ompi_config_asm
    - c_weak_symbols
    - c_get_alignment
* Added new macros to be shared when configuring components:
    - ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...)
    - ompi_check_xgrid
    - ompi_check_tm
    - ompi_check_bproc
* Updated a number of components to use configure.m4 instead of
  configure.stub
    - btl portals
    - io romio
    - tm ras and pls
    - bjs, lsf_bproc ras and bproc_seed pls
    - xgrid ras and pls
    - null iof (used by tm) 

This commit was SVN r6412.
2005-07-09 18:52:53 +00:00
Tim Woodall
c860b92011 don't allocate to nodes that aren't valid (e.g. front end) - ignore them
rather then giving an error message

This commit was SVN r6358.
2005-07-06 17:55:01 +00:00
Jeff Squyres
ba99409628 Major simplifications to component versioning:
- After long discussions and ruminations on how we run components in
  LAM/MPI, made the decision that, by default, all components included
  in Open MPI will use the version number of their parent project
  (i.e., OMPI or ORTE).  They are certaint free to use a different
  number, but this simplification makes the common cases easy:
  - components are only released when the parent project is released
  - it is easy (trivial?) to distinguish which version component goes
    with with version of the parent project
- removed all autogen/configure code for templating the version .h
  file in components
- made all ORTE components use ORTE_*_VERSION for version numbers
- made all OMPI components use OMPI_*_VERSION for version numbers
- removed all VERSION files from components
- configure now displays OPAL, ORTE, and OMPI version numbers
- ditto for ompi_info
- right now, faking it -- OPAL and ORTE and OMPI will always have the
  same version number (i.e., they all come from the same top-level
  VERSION file).  But this paves the way for the Great Configure
  Reorganization, where, among other things, each project will have
  its own version number.

So all in all, we went from a boatload of version numbers to
[effectively] three.  That's pretty good.  :-)

This commit was SVN r6344.
2005-07-04 20:12:36 +00:00
Brian Barrett
9f44b80291 * rename ompi_argv to opal_argv
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few

This commit was SVN r6330.
2005-07-04 00:13:44 +00:00
Brian Barrett
a13166b500 * rename ompi_output to opal_output
This commit was SVN r6329.
2005-07-03 23:31:27 +00:00
Brian Barrett
761402f95f * rename ompi_list to opal_list
This commit was SVN r6322.
2005-07-03 16:22:16 +00:00
Jeff Squyres
1b18979f79 Initial population of orte tree
This commit was SVN r6266.
2005-07-02 13:42:54 +00:00