Modify the orte configure options to specify --enable-multicast such that it directs components to build or not instead of littering the code base with #if's. Remove those #if's where they used to occur.
Add a new grpcomm "mcast" module to support multicast operations. Still some work required to properly perform daemon collectives for comm_spawn operations. New module only builds when --enable-multicast is provided, and when specifically selected.
This commit was SVN r22709.
Have orte call setpgrp after forking (but before exec) when
orte_forward_job_control is set. Then have it send signals to the
child's process group. This allows suspending jobs that fork.
If a SIGTSTP arrives before the processes have been launched, then
record it and suspend them right after launching.
This commit was SVN r22557.
This causes the orteds in the routing tree to remain alive until all termination "acks" from orteds below them have passed through. Thus, if we use static ports, we no longer require a direct orted-to-mpirun connection.
Also modify the binomial routed module so it conforms to what all the other routed modules do and have all messages pass along the routing tree instead of short-circuiting between orteds. This further reduces the number of ports being opened on backend nodes.
This commit was SVN r21203.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
Cleanup the termination in orterun when abnormally commanded via ctrl-c. We can just directly terminate_orteds as the orteds always kill any lingering local procs before exiting - no need to do the two-step cha-cha.
This commit was SVN r21123.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
if the opal_buffer_t get reallocated (and it gets). As in all cases
the data in the beginning of the buffer is the one we need, using
relative addresses fixes the problem.
This commit was SVN r20904.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
SIGCONT to the a.outs. By default, they are not forwarded and
the behavior remains as it has always been. However, if one
runs with --mca orte_forward_job_control 1, then mpirun will
catch those two signals and forward them to the orteds which
will deliver them to the a.outs. We have had requests for
this feature.
This commit was SVN r20391.
Also, per chat with Jeff, modified the Makefile.am's of a few orte tools so that they were consistent in the way we generate the ompi-equivalent cmds.
This commit was SVN r20165.
Basically, the remaining problem turned out to be:
1. closing stdout/stderr during orte_finalize of mpirun
2. inadvertently setting up a write event on fd = -1
3. devising a scheme to more accurately track when the stdin write event was active vs closed so it only got released once
This passed prelim MTT testing by Jeff and Tim, but should soak for awhile before migrating to 1.3.
This commit was SVN r20106.
The following SVN revision numbers were found above:
r20064 --> open-mpi/ompi@a07660aea8
r20068 --> open-mpi/ompi@ec930d14a9
r20074 --> open-mpi/ompi@2940309613
It is a small launch performance improvement as now we relay the launch cmd across to the next daemon before taking the time to launch our own local procs. Still, it does allow more parallel operations during the launch procedure.
This commit was SVN r20104.
1. a direct callback from waitpid - this set the waitpid_fired flag
2. a notify event callback from the IOF - this set the iof complete flag
3. a message via the daemon cmd processor from the proc "de-registering" the sync, thus indicating it was going through MPI_Finalize.
The problem is that these could overlap, with the first two allowing the orted to declare the proc complete before the daemon had responded to #3.
This change forces all three events to flow through the daemon cmd processor, thus ensuring an ordered handling. I'm not certain this will solve the problem, but will await further MTT reports to see. Unfortunately, the problem doesn't show up on any manual or script-based tests I have been able to run, even when I duplicate the exact cmd that fails under MTT.
This commit was SVN r20074.
1. remove direct routed module (hooray!)
2. add radix tree routed module (binomial remains default)
3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess
4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support
5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability
6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon)
Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm.
This will require an autogen...
This commit was SVN r19866.
This needs some soak time to ensure we haven't opened any race conditions. I tried to loop everything in the shutdown procedure through that trigger event call to ensure it all goes through the one-time locks as it did before so that someone hitting ctrl-c when we are already shutting down shouldn't cause problems. Just want to let people use it for awhile to verify.
This commit was SVN r19159.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
Add a new function to opal_progress that tells us our recursion depth to support that solution.
Yes, I know this sounds picky, but good ol' Jeff managed to make it happen by driving his cluster near to death...
Also ensure that we declare "failed" for the daemon job when daemons fail instead of the application job. This is important so that orte knows that it cannot use xcast to tell daemons to "exit", nor should it expect all daemons to respond. Otherwise, it is possible to hang.
After lots of testing, decide to default (again) to slurm detecting failed orteds. This proved necessary to avoid rather annoying hangs that were difficult to recover from. There are conditions where slurm will fail to launch all daemons (slurm folks are working on it), and yet again, good ol' Jeff managed to find both of them.
Thanks you Jeff! :-/
This commit was SVN r18611.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Modify grpcomm xcast so it now uses the selected routed module - eliminates cross-wiring of xcast and routing paths. Suboptimal at the moment, but better implementation is on its way.
Cleanup ignore properties on the new routed components.
This commit was SVN r18377.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.
Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.
This commit was SVN r18338.
Add the daemon map capability to the ODLS to create and save a map of daemon vpid vs nodename from the launch message.
Cleanup a few places in the base plm launch support where we didn't adequately protect rml recv's from potentially executing sends.
This commit was SVN r18143.
