SLURM 19 discontinued the use of --cpu_bind (and changed it to
--cpu-bind). There's no easy way to test at run time which one is
accepted, so set the environment variable SLURM_CPU_BIND to "none",
which should do the same thing as the srun CLI parameter.
Signed-off-by: Jordan Hayes <jhayes@ucr.edu>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The following command hangs:
% mpirun --rank-by core -np 3 --report-bindings hostname
because of a loop where i is supposed to cycle through an
array of size num_objs, but for some reason it's only
looking at node->num_procs entries.
I changed the counter so it stays in the loop (stays on this
node) until it makes a full cycle through the array of objects
without any assignments then it ends the loop so it can go to
the next node.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
The first category of issue I'm addressing is that recent code changes
seem to only consider -cpu-set as a binding option. Eg a command like
this
% mpirun -np 2 --report-bindings --use-hwthread-cpus \
--bind-to cpulist:ordered --map-by hwthread --cpu-set 6,7 hostname
which just round robins over the --cpu-set list.
Example output which seems fine to me:
> MCW rank 0: [..../..B./..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
> MCW rank 1: [..../...B/..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
It should also be possible though to pass a --cpu-set to most other
map/bind options and have it be a constraint on that binding. Eg
% mpirun -np 2 --report-bindings \
--bind-to hwthread --map-by hwthread --cpu-set 6,7 hostname
% mpirun -np 2 --report-bindings \
--bind-to hwthread --map-by ppr:2:node,pe=2 --cpu-set 6,7,12,13 hostname
The first command above errors that
> Conflicting directives for mapping policy are causing the policy
> to be redefined:
> New policy: RANK_FILE
> Prior policy: BYHWTHREAD
The error check in orte_rmaps_rank_file_open() is likely too aggressive.
The intent seems to be that any option like "--map-by whatever" will
check to see if a rankfile is in use, and report that mapping via rmaps
and using an explicit rankfile is a conflict.
But the check has been expanded to not just check
NULL != orte_rankfile
but also errors out if
(NULL != opal_hwloc_base_cpu_list &&
!OPAL_BIND_ORDERED_REQUESTED(opal_hwloc_binding_policy))
which seems to be only recognizing -cpu-set as a binding option and
ignoring -cpu-set as a constraint on other binding policies.
For now I've changed the
NULL != opal_hwloc_base_cpu_list
to
OPAL_BIND_TO_CPUSET == OPAL_GET_BINDING_POLICY(opal_hwloc_binding_policy)
so it hopefully only errors out if -cpu-set is being used as a binding
policy. Whether I did that right or not it's enough to get to the next
stage of testing the example commands I have above.
Another place similar logic is used is hwloc_base_frame.c where it has
/* did the user provide a slot list? */
if (NULL != opal_hwloc_base_cpu_list) {
OPAL_SET_BINDING_POLICY(opal_hwloc_binding_policy, OPAL_BIND_TO_CPUSET);
}
where it used to (long ago) only do that if
!OPAL_BINDING_POLICY_IS_SET(opal_hwloc_binding_policy)
I think the new code is making it impossible to use --cpu-set as anything
other than a binding policy.
That brings us past the error detection and into the real functionality, some of
which has been stripped out, probably in moving to hwloc-2:
% mpirun -np 2 --report-bindings \
--bind-to hwthread --map-by hwthread --cpu-set 6,7 hostname
> MCW rank 0: [B.../..../..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
> MCW rank 1: [.B../..../..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
The rank_by() function in rmaps_base_ranking.c makes an array out of objects
returned from
opal_hwloc_base_get_obj_by_type(,,,i,)
which uses df_search(). That function changed quite a bit from hwloc-1 to 2
but it used to include a check for
available = opal_hwloc_base_get_available_cpus(topo, start)
which is where the bitmask from --cpu-set goes. And it used to skip objs that
had hwloc_bitmap_iszero(available).
So I restored that behavior in ds_search() by adding a "constrained_cpuset" to
replace start->cpuset that it was otherwise processing. With that change in
place the first command works:
% mpirun -np 2 --report-bindings \
--bind-to hwthread --map-by hwthread --cpu-set 6,7 hostname
> MCW rank 0: [..../..B./..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
> MCW rank 1: [..../...B/..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
The other command uses a different path though that still ignored the
available mask:
% mpirun -np 2 --report-bindings \
--bind-to hwthread --map-by ppr:2:node:pe=2 --cpu-set 6,7,12,13 hostname
> MCW rank 0: [BB../..../..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
> MCW rank 1: [..BB/..../..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
In bind_generic() the code used to call
opal_hwloc_base_find_min_bound_target_under_obj() which used
opal_hwloc_base_get_ncpus(), and that's where it would
intersect objects with the available cpuset and skip over ones
that were't available. To match the old behavior I added a few
lines in bind_generic() to skip over objects that don't intersect
the available mask. After that we get
% mpirun -np 2 --report-bindings \
--bind-to hwthread --map-by ppr:2:node:pe=2 --cpu-set 6,7,12,13 hostname
> MCW rank 0: [..../..BB/..../..../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
> MCW rank 1: [..../..../..../BB../..../..../..../..../..../..../..../....][..../..../..../..../..../..../..../..../..../..../..../....]
I think the above changes are improvements, but I don't feel like they're
comprehensive. I only traced through enough code to fix the two specific
bugs I was dealing with.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
This is so when a debugger attaches using MPIR, it can step out of this stack back into main.
This cannot be done with certain aggressive optimisations and missing debug information.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Co-authored-by: Jeff Squyres <jsquyres@cisco.com>
If a user provides a list of nodes to use via -host or -hostfile, then
ensure that the ranks are placed according to that order. Also fix a bug
where the number of slots on a node was incorrectly computed for
localhost if the name given didn't exactly match the return from
get_hostname.
Signed-off-by: Ralph Castain <rhc@pmix.org>
in schizo/ompi, sets the new OMPI_MCA_mpi_oversubscribe environment
variable according to the node oversubscription state.
This MCA parameter is used to set the default value of the
mpi_yield_when_idle parameter.
This two steps tango is needed so the mpi_yield_when_idle setting
is always honored when set in a config file.
Refs. open-mpi/ompi#6433
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Ensure we publish all the info required to be returned to the other
mpirun when executing this operation. We need to know the daemon (and
its URI) that is hosting each of the other procs so we can do a direct
modex operation and retrieve their connection info.
Signed-off-by: Ralph Castain <rhc@pmix.org>
* When we moved to allowing dual rml/oob transports, we added a bunch of
stuff that is no longer needed. Remove it so as to simplify the
messaging system.
* Fix the routed/radix component so it correctly returns the parent's
vpid
Signed-off-by: Ralph Castain <rhc@pmix.org>
We've been fighting the battle of trying to create a regex generator and
parser that can handle arbitrary hostname schemes - without long-term
success. The worst of it is that there is no way of checking to see if
the computed regex is correct short of parsing it and doing a
character-by-character comparison with the original string. Ugh...there
has to be a better solution.
One option is to investigate using 3rd-party regex libraries as
those are coming from communities whose sole focus is resolving that
problem. However, someone would need to spend the time to investigate
it, and we'd have to find a license-friendly implementation.
Another option is to quit beating our heads against the wall and just
compress the information. It won't be as much of a reduction, but we
also won't keep hitting scenarios where things break. In this case, it
seems that "perfection" is definitely the enemy of "good enough".
This PR implements the compression option while retaining the
possibility of people adding regex-generating components. The
compression code used in ORTE is consolidated into the opal/compress
framework. That framework currently held bzip and gzip components for
use in compressing checkpoint files - since we no longer support C/R, I
have .opal_ignore'd those components.
However, I have left the original framework APIs alone in case someone
ever decides to redo C/R. The APIs of interest here are added to the
framework - specifically, the "compress_block" and "decompress_block"
functions. I then moved the ORTE zlib compression code into a new
component in this framework.
Unfortunately, the framework currently is a single-select one - i.e.,
only one active component at a time. Since I .opal_ignore'd the other
two and made the priority of zlib high, this isn't a problem. However,
if someone wants to re-enable bzip/gzip or add another component, they
might need to transition opal/compress to a multi-select framework.
Included changes:
* Consolidate the compression code into the opal/compress framework
* Move the ORTE zlib compression code into a new opal/compress/zlib
component
* Ignore the bzip and gzip components in opal/compress framework
* Add a "compress_base_limit" MCA param to set the threshold above which
we compress data - defaults to 4096 bytes
* Delete stale brucks and rcd components from orte/grpcomm framework
* Delete the orte/regx framework
* Update the launch system to use opal/compress instead of string regex
* Provide a default module if no zlib is available
* Fix some misc multi-node issues
* Properly generate the nidmap in response to a "connection warmup"
message so the remote daemon knows the children it needs to launch.
* Remove stale references to orte_node_regex
* opal_byte_object_t's are not OPAL objects - properly release allocated
memory.
* Set the topology
* Currently only handling homogeneous case
* Update the compress framework files to conform
* Consolidate open/close into one "frame" file. Ensure we open/close the
framework
Signed-off-by: Ralph Castain <rhc@pmix.org>
Example:
For the list of hosts `a01,b00,a00` a regex is generated:
`a[2:1.0],b[2:0]`, where `a`-hosts prefixes moved to the begining,
it breaks the hosts ordering.
This commit fixes regex for that case to `a[2:1],b[2:0],a[2:0]`
Signed-off-by: Boris Karasev <karasev.b@gmail.com>
Example:
For the nodelist `jjss,jjss0000001,jjss0000003,jjss0000002` a regular
expression was `jjss[0:0],jjss[7:1,3,2]` that led to incorrect unpacking
the first host as `jjs0`. This commit fixes an adding empty range for
not numeric hostnames. Here is the fixed regex for this exapmle:
`jjss,jjss[7:1,3,2]`
Signed-off-by: Boris Karasev <karasev.b@gmail.com>
be more careful about closing framewworks as part of
orte_finalize. Owing to recent restructuring in opal to handle
finalize in a more general fashion, the missing framework
closes were causing meltdowns as the mca vars subsystem
was cleaning itself up.
This problem was recently reported by Siegmar:
https://www.mail-archive.com/users@lists.open-mpi.org//msg32946.html
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Add the --pset option for app_contexts so the user can provide a string
name for each app_context. Use the new PMIx pset attribute to store the
names in the PMIx local storage for retrieval
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit fixes an compilation error when configured
with `--enable-timing`.
Procedures in the function `orte_ess_base_app_setup`
in `orte/mca/ess/base/ess_base_std_app.c` are moved
to `orte/mca/ess/pmi/ess_pmi_module.c`
and `orte/mca/ess/singleton/ess_singleton_module.c`
in the recent commit 57f6b94fa5.
In `ess_pmi_module.c`, the first argument of the
`OPAL_TIMING_ENV_NEXT` macro should have been adapted
to the destination function but was not.
In `ess_singleton_module.c`, `OPAL_TIMING_ENV_INIT`
was not used in the destination function originally.
So `OPAL_TIMING_ENV_NEXT` cannot be used in the function.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Update the show_help message for when there are not enough slots to
run an application.
Also, remove a bunch of copies of this message in various show_help
text files that aren't used/referred to anywhere in the code.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
If we detect that we are being debugged by an MPIR-based debugger, then
print a warning that OMPI's MPIR support has been deprecated and will be
removed in a subsequent release.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
using the standard $USER and $HOSTNAME environment variables
to make reproducible builds possible.
See https://reproducible-builds.org/ for why this is good.
This helps improve issue #3759
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
Thanks to @hjelmn for debugging it and providing the patch
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit efa8bcc17078c89f1c9d6aabed35c90973a469bf)
Correctly aggregate slots across -H entries from each app. Take into
account any -H entry when computing nprocs when no value was given.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
