a memory leak. Similar changes shuld be applied to all the
other PML that are copies of OB1. This patch is related to
#4653.
This commit was SVN r31838.
Avoid sending/receiving zero size messages in order to be compliant
with the top-level modification
cmr=v1.8.2:ticket=4651:reviewer=bosilca
This commit was SVN r31836.
The following Trac tickets were found above:
Ticket 4651 --> https://svn.open-mpi.org/trac/ompi/ticket/4651
of existing BTL fo an endpoint, all the others are just partial list.
Thus, all the cleaning should first be done in the btl_send array,
and them in the other arrays (btl_eager and btl_rdma).
This commit was SVN r31834.
This commit fixes two issues:
- This intent of the code @ bml_r2.c:486 is to prevent calling the
btl_del_procs more than once for a given proc. Gilles correctly
identified there was a problem in this code but r31786 we not the
correct fix.
- Fix a segmentation fault in r2 finalize revealed by the fact we
actually call del_procs now.
cmr=v1.8.2:reviewer=ggouaillardet:ticket=trac:4645
This commit was SVN r31829.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
r31786 --> open-mpi/ompi@fc96b0a7b8
The following Trac tickets were found above:
Ticket 4645 --> https://svn.open-mpi.org/trac/ompi/ticket/4645
MPI_Isend.
I filed an RFC for this optimization some time back. It is a
relatively simple optimization. If the data associated with an
MPI_Isend can be put on the wire without allocating an MPI_Request
then do so. In this case we can legally return omp_request_empty
which will correctly indicate that the request is complete and that is
was not cancelled (these are the only requirements on send requests).
cmr=v1.8.3:reviewer=bosilca
This commit was SVN r31828.
Basesmuma was vallocing space for control data then mmapping over that
data. Nothing in the code suggests any need for mmapping a specific
address so I did the following to remove the leak:
- Removed the valloc of the buffer space
- ftruncate the mmaped file to ensure there is sufficient memory to
allocate space for the control data.
Ideally this code should be using opal/shmem but that is a larger
change. Keeping it simple for now.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31822.
Make sure to cleanup the registation cache when removing an
endpoint. This leak only affects systems with XPMEM installed.
Since this is in code specific to XPMEM not sure who could review so
sending it directly to the RM.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31821.
This commit :
- Correctly retrieve the communicator size when
checking memory and parameters
- Ensure (sendtype,sendcount) and (recvtype,recvcount)
matches and return with MPI_ERR_TRUNCATE otherwise
- Return with MPI_SUCCESS without invoking the low level
if no data is going to be transferred
- Fixes trac:4506
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31815.
The following Trac tickets were found above:
Ticket 4506 --> https://svn.open-mpi.org/trac/ompi/ticket/4506
r30343 introduced the optimization of putting the OB1 sendreq and
recvreq on the stack for blocking sends and receives. However, the
requests did not contain enough storage for the data that is normally
immediately ''after'' the request (e.g., BTL data).
This commit changes these requests to be pointers and to use alloca()
to get enough total space for the OB1 request and all the associated
data.
The change is smaller than it looks; most of it is just changing from
"foo.bar" to "foo->bar" notation (etc.).
Submitted by Jeff, reviewed by Nathan. But we want George to look at
this (and get a little soak time on the trunk) before moving to v1.8.
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31806.
The following SVN revision numbers were found above:
r30343 --> open-mpi/ompi@2b57f4227e
This commit fixes leaks of bml endpoints in finalize. A summary of the
bugs/fixes is below.
1) ompi_mpi_finalize used ompi_proc_all to get the list of procs but
never released the reference to them (ompi_proc_all called
OBJ_RETAIN on all the procs returned). When calling del_procs at
finalize it should suffice to call ompi_proc_world which does not
increment the reference count.
2) del_procs is called BEFORE ompi_comm_finalize. This leaves the
references to the procs from calling the pml_add_comm
function. The fix is to reorder the calls to do omp_comm_finalize,
del_procs, pml_finalize instead of del_procs, pml_finalize,
ompi_comm_finalize.
3) The check in del_procs in r2 checked for a reference count of
1. This is incorrect. At this point there should be 2 references:
1 from ompi_proc, and another from the add_procs. The fix is to
change this check to look for a reference count of 22. This check
makes me extremely uncomforable as nothing will call del_procs if
the reference count of a procs is not 2 when del_procs is
called. Maybe there should be an assert since this is a developer
error IMHO.
cmr=v1.8.2:reviewer=bosilca
This commit was SVN r31782.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
netpatterns_setup_narray_knomial_tree.
Fix a bug in ptpcoll that caused memory allocated by
netpatterns_setup_narray_knomial_tree to leak.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31781.
vagrind correctly indicated that the mpool is needed when tearing down
the free lists. Reordered the teardown code to correct this.
My code so no review required.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31780.
Two leaks are fixed in this commit:
- Do not leak btl component list items.
- Do not leak the nodename when decoding the pidmap.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31779.
This commit fixes three leaks:
- bml/r2: fix leak of del_procs in mca_bml_r2_del_procs
- Release the modex data in btl/scif, btl/ugni, and btl/vader
- ompi_mpi_finalize: close the allocator framework
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31778.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
a brand new dummy connection has to be used to properly
trigger the main thread termination and avoid timeout in
the main thread
cmr=v1.8.2:reviewer=hjelmn
This commit was SVN r31772.
The local buffer object is only used by the root of the group,
so move down the buffer declaration and initialization.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31771.
An OBJ_DESTRUCT was missing for mca_pml_ob1.send_ranges causing a
memory leak. Identified by valgrind.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31768.
scif_close is not causing scif_poll in the listening thread to return
as expected. To ensure the thread exits attempt to make a local
connection to wake up the thread before calling pthread_join.
cmr=v1.8.2:reviewer=ggouaillardet
This commit was SVN r31756.
closed
We were leaving the selected component open. This commit should
eliminate a leak detected by valgrind.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31749.
The smsg_mboxes free list was not getting destructed. The construct
has been moved to module initialization and a matching destruct is now
in the module destruct.
This commit was SVN r31746.
This commit fixes memory leaks discovered in the sbgp setup code. We
were leaking an opal_argv as well as some list items. I took the
opportunity to clean up the code a little which includes making use of
the opal_argv_free function.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31745.
The items in the available bcol list were getting leaked. This commit
fixes this leak. I also cleaned up the code a bit. This includes
making use of the opal_argv_free function.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31744.
It is essential to call mca_base_framework_close for every framework
that is opened. coll/ml was not doing this so neither bcol nor sbgp
were getting cleaned up. This commit fixes this omission.
Also fixed a leak caused by calling OBJ_DESTRUCT for something created
with OBJ_NEW. With these changes coll/ml appears to be valgrind clean.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31743.
Simple bug. The dist_graph pointer must be a constructed object. The
change from malloc to OBJ_NEW was missing from r31716. Tested with MTT
and everything looks ok now.
This commit was SVN r31739.
The following SVN revision numbers were found above:
r31716 --> open-mpi/ompi@e3df77548d
There is no reason to cancel the listening thread. It should die
automatically when the file descriptor is closed. It is sufficient
to just wait for the thread to exit with pthread join.
cmr=v1.8.2:ticket=trac:4616:reviewer=jsquyres
This commit was SVN r31738.
The following Trac tickets were found above:
Ticket 4616 --> https://svn.open-mpi.org/trac/ompi/ticket/4616
We were leaking file descriptors when coll/ml was in use. It turn out
this was because basesmuma was failing to unmap files it had previously
mapped. This commit cleans up the setup code to ensure that we only
attempt to map the control files once per module and then ensures the
files are unmapped when the module is released.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31737.
algorithm
Per suggestion from Manju make sure there isn't a gap in the size ranges
for the available algorithms.
cmr=v1.8.2:ticket=trac:4437:reviewer=ompi-rm1.8
This commit was SVN r31728.
The following Trac tickets were found above:
Ticket 4437 --> https://svn.open-mpi.org/trac/ompi/ticket/4437
MPI_Cart_Create/MPI_Graph_create/MPI_Dist_Graph
Fixes trac:4581
This commit was SVN r31716.
The following Trac tickets were found above:
Ticket 4581 --> https://svn.open-mpi.org/trac/ompi/ticket/4581
In preparation for moving the BTLs down to OPAL, discontinue the use
of the RML for connectivity client/agent communication. Instead, use
local unix domain sockets in the job session directory (all
communication is between processes on the same server, so unix domain
sockets are fine).
This commit was SVN r31710.
Add the component use_udp value into the modex. If my component's
use_udp value doesn't agree with the use_udp value from a peer's modex
data, print a helpful message and disqualify the usnic BTL (the usnic
BTL will not be used). This prevents accidental customer
misconfigurations.
Reviewed by Dave Goodell
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31689.
Trivial struct re-ordering to eliminate holes in the middle of the
struct (although there's still a hole at the end) and reduce the
overall size of the struct from 64 to 56 bytes. Also change mtu from
int to uint16_t; there was no need for it to be that large.
Reviewed by Dave Goodell
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31688.
Fix mismatch between the MCA param (which expresses the timeout in
*mili*seconds) and the struct timeval timeout (which expresses the
timeout in *micro*seconds).
Reviewed by Dave Goodell
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31687.
top_ompi_srcdir -> OMPI_TOP_SRCDIR
top_ompi_builddir -> OMPI_TOP_BUILDDIR
We also split the srcdir/builddir flags according to their local tree (e.g., OPAL_TOP_SRCDIR), and tied them all together in configure.ac. Renamed ompi_ignore and ompi_unignore to be opal_<foo> as these are agnostic markers.
Only thing left is ompilibdir being treated similar to what we dif for srcdir/builddir. Coming soon.
This commit was SVN r31678.
In abusive MPI communication patterns, sending a UDP ping only once a
second may not be sufficient -- all the UDP pings may be dropped. So
increase the frequency of the pings to every quarter second, and allow
more total pings to be sent.
Total timeout time is still the same (10 seconds) -- we'll just now
try 40 times (i.e., once every quarter second) as opposed to 10 times
(i.e., once a second). Testing has shown that this frequency allows
the connectivity checker to always succeed even in the many-to-one
abusive communication patterns.
cmr=v1.8.2:reviewer=dgoodell
This commit was SVN r31602.
We're passing a char foo[x] into PACK_BYTES, so we don't need to take
its address in the macro. This is parallel to the UNPACK_BYTES macro
(where we pass a char bar[x] into it, and don't take its address in
the macro).
The value we're packing is only used to output in a show_help message,
which is why this wasn't noticed before (i.e., it's not used in
network or addressing that would have caused a failure).
cmr=v1.8.2:reviewer=dgoodell
This commit was SVN r31594.
Use the new opal dstore API (vs. the old RTE DB API).
(dstore is not going to the v1.8 series, so there's no need to CMR
this to v1.8)
This commit was SVN r31580.
Not closing this file descriptor will cause us to leak file
descriptors. It is safe to close the file after it has been mmapped.
cmr=v1.8.2:reviewer=manjugv
This commit was SVN r31579.
There's a requirement in several places (e.g., opal dstore) that
sizeof(ompi_process_name_t) -- which comes from the compile-time
selected ompi/mca/rte component -- is equal to sizeof(uint64_t). If
it's not, Bad Things will happen.
So put an assert here to catch that case.
This commit was SVN r31577.
The old default context id maximum was committed to the trunk in
2006. After some discussion with Intel it appears this is restricting
the mtl to an arbirarly small number of communicators. Increasing the
default to allow up to 2^16 - 1 context ids.
Refs trac:4574
cmr=v1.8.2
This commit was SVN r31574.
The following Trac tickets were found above:
Ticket 4574 --> https://svn.open-mpi.org/trac/ompi/ticket/4574
http://www.open-mpi.org/community/lists/devel/2014/04/14496.php
Revamp the opal database framework, including renaming it to "dstore" to reflect that it isn't a "database". Move the "db" framework to ORTE for now, soon to move to ORCM
This commit was SVN r31557.
This commit fixes a bug that can cause request and communicator leaks
when cleaning up an OSC window. The should prevent a hang seen with
IMB-EXT.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31539.
We will track #4568 from the 1.8 CMR.
Closes trac:4568
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31535.
The following Trac tickets were found above:
Ticket 4568 --> https://svn.open-mpi.org/trac/ompi/ticket/4568
This commit will improve the message rate when using the sendi function
by not waiting for the send to get to the remote process.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31526.
feature
This commit should fix a hang seen when running some of the one-sided
tests. The downside of this fix is it reduces the maximum size of the
messages that use the fast boxes. I will fix this in a later commit.
To improve performance under a heavy load I introduced sequencing to
ensure messages are given to the pml in order. I have seen little-no
impact on the message rate or latency with this change and there is a
clear improvement to the heavy message rate case.
Lets let this sit in the trunk for a couple of days to ensure that
everything is working correctly.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31522.
Patch from Gilles Gouaillardet on #4517 to fix handling 0-sized
messages in coll tuned with MPI_ALLTOALLV and MPI_IN_PLACE.
Reviewed by Jeff Squyres.
Fixes trac:4517
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31521.
The following Trac tickets were found above:
Ticket 4517 --> https://svn.open-mpi.org/trac/ompi/ticket/4517
Patch from Gilles Gouaillardet on #4506 to correctly handle 0-sized
messages in coll/basic MPI_Alltoallv and MPI_Alltoallw.
Reviewed by Jeff Squyres.
Fixes trac:4506.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r31519.
The following Trac tickets were found above:
Ticket 4506 --> https://svn.open-mpi.org/trac/ompi/ticket/4506
Ensure to also OBJ_RELEASE the neightbor and ineighbor modules.
Fixes trac:4444 (this patch is from that ticket).
This commit was SVN r31516.
The following Trac tickets were found above:
Ticket 4444 --> https://svn.open-mpi.org/trac/ompi/ticket/4444
The algorithm was failing ibm/collective/allgather and iallgather. I
cleaned up the code to eliminate duplicate code paths and tracked the
issue down to an error in the way extra nodes in the knomial exchange
are handled. The new code is more compact and has been tested with up
to 64 ranks with the ibm test suite.
cmr=v1.8.1:reviewer=manjugv
This commit was SVN r31419.
The file coll_ml_ibarrier.c wasn't included in coll/ml's Makefile.am
and the setup code from coll_ml_hier_algorithms_ibarrier.c was not
being called. It looks like this code is stale and has long since been
replaced by the code in coll_ml_barrier.c
Once all these little CMRs are approved I may make it into one roll-up
CMR to make it easier on the RM.
cmr=v1.8.1:reviewer=manjugv
This commit was SVN r31418.
a segmentation fault in the reduce cleanup
Some of the changes address false warnings produced by scan-build. I
added asserts and changed some malloc calls to calloc to silence these
warnings.
The was one issue in cleanup for reduce since the component_functions
member is changed by the allreduce call. There may be other issues
with how this code works but releasing the allocated
component_functions after setting up the static functions addresses
the primary issue (SIGSEGV).
cmr=v1.8.1:reviewer=manjugv
This commit was SVN r31417.
Two things to note:
- This change will allow us to expand the BTL interface without
having to worry about modifying BTLs that will not support the new
interfaces. More on this will come later this year as part of the
1.9 series.
- C99 guarantees that uninitialed members of structs declared outside
of functions (DATA binary section) will be initialized with
0's. This allows us to drop stuff like .btl_flags = 0, or .btl_get
= NULL.
This commit was SVN r31388.
When sending PUT_LONG, the data is sent before headers, and sometimes
the header is not flushed immediately. This creates a lot of unexpected
receives in the peer, since it would posts a receive only when gets the
header, which makes it run out of receive buffers. When the sender
eventually flushes the window, the receiver already has no buffers to
receive the header, which causes a deadlock.
The fix is to always flush the headers when doing put_long.
cmr=v1.8.1:reviewer=hjelmn
This commit was SVN r31378.
While testing one-sided on LANL systems I found a couple more OSC
bugs that were not caught during the initial testing:
- In the passive target code we read the read lock count as a
char instead of the intended uint32_t. This causes lock to
lockup when using shared locks after 127 iterations.
- The post code used the wrong group when trying to increment post
counters. This causes a segmentation fault.
- Both the post and wait code used the wrong check in the inner
loop leading to an infinite loop.
cmr=v1.8.1:reviewer=jsquyres
This commit was SVN r31354.
There was a typo in the ompi_osc_gacc_long_start that was causing a
segmentation fault when executing long get accumulate operations.
cmr=v1.8.1:reviewer=jsquyres
This commit was SVN r31353.
some of the collective modules, the shared memory and the profiling
interface. I left out VT, dynamic fcoll and seq rmaps.
cmr=v1.8.1:reviewer=jsquyres:subject=silence Coverity reported warnings
This commit was SVN r31309.
This commit fixes two nasty races:
- One can occur if the connection request message and connection completion
message arrive out of order. This can happen normally when adaptive routing
is used and also in a timeout situation where a UD message is lost.
- One occurs when handling an ack at the same time as we are handling the
message timeout. In this case we can not free the message or the timeout
will be operating on invalid data. This fix is a band-aid until I can come
up with a better approach. Instead of freeing the message it is marked
as inactive and the event callback is triggered immediately (this has no
affect if the callback is already active). The callback then frees the
message if it is inactive.
cmr=v1.8.1:reviewer=pasha
This commit was SVN r31305.
The last fix prevented a hang but had some cases where the results were
wrong. Fixed. Tested with armci, openmpi/ibm, openmpi/onesided.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31284.
It might be possible (don't know) for a datatype to made of a contiguous block
of a primitive datatype and have an lb. If this is ever the case the code
would have done the wrong thing. Add the lb in to be safe.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31283.
Discussed this with Manju and we decided to back this one out until a later time.
This reverts commit r31188 and closes trac:4435
This commit was SVN r31282.
The following SVN revision numbers were found above:
r31188 --> open-mpi/ompi@f1dd589092
The following Trac tickets were found above:
Ticket 4435 --> https://svn.open-mpi.org/trac/ompi/ticket/4435
There are differences between how active and passive messages are
accounted for in this component. Active message counts on the sender
side are set to zero before the control message is sent so we do not
have to add one to the expected number of messages or we end up
double counting the control message. This commit should fix that error.
Fixes regression in one-sided/test_rma1
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31281.
There were a couple of issues with the memory leak fixes and several more verbose
issues. This fixes those issues.
cmr=v1.8.1:ticket=trac:4473
This commit was SVN r31273.
The following Trac tickets were found above:
Ticket 4473 --> https://svn.open-mpi.org/trac/ompi/ticket/4473
This fixes more issues identified by armci. More issues still remain and fixes are
coming for those as well.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31272.
Also, since I put some of the macros for these silent/verbose rules up
in the top-level Makefile.man-page-rules file, I renamed it to
Makefile.ompi-rules.
I've had this sitting around for a while; now seems like as good a
time as any to commit it.
This commit was SVN r31271.
directory not the job's
This bug didn't affect the correctness of the vader results just the
cleanup. This commit removes an error message about removing a non-existent
file.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31265.
Thanks to ggouaillardet for finding and fixing these issues.
Closes trac:4460
cmr=v1.8.1:reviewer=manjugv
This commit was SVN r31264.
The following Trac tickets were found above:
Ticket 4460 --> https://svn.open-mpi.org/trac/ompi/ticket/4460
If ompi_modex_recv() fails with OPAL_ERR_DATA_VALUE_NOT_FOUND, it
simply means that the peer process did not put any usnic BTL modex
info -- it is not an error. So have the usnic BTL simply ignore that
peer (vs. disqualifying itself / treating this like a real error).
Refs trac:4442.
This commit was SVN r31258.
The following Trac tickets were found above:
Ticket 4442 --> https://svn.open-mpi.org/trac/ompi/ticket/4442
This commit should finish the work started for #869. Closing that ticket
with this commit.
Closes trac:869
cmr=v1.8.1:reviewer=jsquyres
This commit was SVN r31257.
The following Trac tickets were found above:
Ticket 869 --> https://svn.open-mpi.org/trac/ompi/ticket/869
in ompi_mtl_mxm_add_procs, define the ep_index variable only
for an older version of mxm.
submitted by Alina, reviewed by Mike.
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31245.
The error doesn't prevent the user from running so there is no reason
to display it unless the user requested it (through coll_ml_verbose).
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31242.
Fix a one line bug when dealing with non-contiguous sends in prepare_src. Bug was
identified by the intel test suite.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31232.
the case fix in ompi_osc_base_process_op in r31204.
There are two cases that needed to be handled:
- The target is a simple datatype (contiguous block of a primitive
type) but the origin is not. In this case we still need to pack
the origin data but we can not rely on the convertor to do the
unpack (see r31204).
- Both the origin and target datatypes are simple datatypes. In this
case we can use ompi_op_reduce to do the accumulation without having
to pack the origin data.
cmr=v1.8:ticket=trac:4449
This commit was SVN r31231.
The following SVN revision numbers were found above:
r31204 --> open-mpi/ompi@949abe45cd
The following Trac tickets were found above:
Ticket 4449 --> https://svn.open-mpi.org/trac/ompi/ticket/4449
Fixed two bugs:
- Use module->comm NOT comm to get the CID for the shared memory backing
file. This fixes the case where there are multiple shared memory windows
at the same time.
- Remember to unlink the shared memory backing file.
Refs trac:4438
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31227.
The following Trac tickets were found above:
Ticket 4438 --> https://svn.open-mpi.org/trac/ompi/ticket/4438
This commit fixes two bugs:
- We were not correctly setting the lock type in the outstanding lock
for lock_all. This caused undefined behavior.
- flush_all was incorrectly checking for comm size - 1 lock acks but
comm size flush acks. This is the reverse of what was intended.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31226.
In most cases, bad messages received by the connectivty checker are
just dropped. However, in one specific code path, a bad packet caused
an abort. Doh!
This commit does two things:
1. Improve verbose messages for all these cases
1. Simply drop incoming messages that cannot be identified as ACKs or PINGs
Submitted by Jeff Squyres, reviewed by Dave Goodell.
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31225.
It is possible to get into a situation where a small accumulate operation
can not be completed because a large accumulate operation holds the lock.
In this case we may return from wait/flush/etc before the operation is
complete. To handle this case increment the expected incoming fragment
count when queuing an accumulate operation and increment the incoming
fragment count after processing the accumulate operation.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31224.
of the primitive datatype
In this case we can not use the convertor to run the accumulate operation
since the datatype is a more or less a primitive type.
cmr=v1.8:ticket=trac:4449
This commit was SVN r31222.
The following Trac tickets were found above:
Ticket 4449 --> https://svn.open-mpi.org/trac/ompi/ticket/4449
This commit fixes two issues:
- osc/rdma: The target side of an accumulate was using the target datatype
in the receive to the packed buffer. This was conflicting with the way
the reduction is done into the target buffer. Changed the receive to use
the primitive datatype.
- osc/base: The copy table was completely wrong. Fixed the table to match
the underlying datatypes (which are opal not ompi datatypes).
- osc/base: There is a problem using the optimized description. Fall back
on using the non-optimized description until we can understand what is
going wrong.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31204.
results
The code to handle completion messages did not correctly increment the
number of expected messages. This could cause wait to return before all
incoming messages are complete.
I also added a check to ensure that start returns an error if we are in
a passive access epoch.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31203.
ROMIO code assumes all processes will use the same ROMIO driver. we
were not reaching the "find a common file system" logic when NFS was
enabled, everyone stat-ed the file system without errors, but some
processees found a different file system (like if some processes are
writing to NFS and others to UFS)
See discussion beginning here:
http://lists.mpich.org/pipermail/discuss/2014-March/002403.html
Tested-by: Jeff Squyres <jsquyres@cisco.com>
Submitted by Rob Lathan, reviewed by Jeff Squyres
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31201.
the ompi_common_verbs_find_ports function had a call to
ompi_ibv_get_device_list, but not to ompi_ibv_free_device_list.
fixed by Alina, reviewed by Vasily/Mike.
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31200.
This commit adds large datatype description support to the osc/rdma
component. Support is provided by an additional send/recv of the datatype
description if the description does not fit in an eager buffer. The
code is designed to require minimal new code and not for speed. We
consider this code path to be a slow path.
Refs trac:1905
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31197.
The following Trac tickets were found above:
Ticket 1905 --> https://svn.open-mpi.org/trac/ompi/ticket/1905
When we are only using local ranks basesmuma needs to provide an allreduce
function for both large and small message or else the coll/ml selection
logic will fail. In the future this logic should probably be updated to
just disable allreduce in coll/ml instead of disabling coll/ml. For now
it should be correct to say the basesmuma allgather works for larger
messages.
cmr=v1.8:reviewer=manjugv
This commit was SVN r31190.
a hierarchy actually matches a bcol that is in use.
There was a bug in one of the paths to calculate the ml buffer size. I fixed
the bug and squashed all the paths together to avoid further issues (the
result was correct in another path that calculated the same value).
Additionally, the i_hier was being used as the bcol_index. This is not
correct in a couple of cases so I added a variable to keep track of the
real bcol_index.
cmr=v1.8:reviewer=pasha
This commit was SVN r31189.
bound.
This case is correctly handled by coll/ml so remove the check that diables
coll/ml in the not bound case.
cmr=v1.8:reviewer=manjugv
This commit was SVN r31188.
This patch fixes two leaks:
- Fix typo in fallback collective code that caused coll/ml to retain
the ibcast module twice but only release it once. One of those ibcast
saves was supposed to be bcast.
- Do not check for module initialization in the module destructor. It
is possible to destruct a module that is partially setup.
cmr=v1.8:reviewer=manjugv
This commit was SVN r31187.
When you call MPI_Graph_create with a old_comm of size N, and pass
nnodes=(N=1), then the Nth proc is supposed to get MPI_COMM_NULL out.
The code in this base function didn't properly handle the proc(s) that
are supposed to get MPI_COMM_NULL out.
cmr=v1.7.5:reviewer=hjelmn
This commit was SVN r31145.
This isn't causing any errors that I know about but it does fix an
annoying valgrind warning. Simple fix, no review required.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r31130.
There are situations where coll/ml does not initialize properly. These will
eventually need to be fixed but in the meantime it is better to not always
print an error message because the collective framework can still fall back
on another collective module. This commit reduces the verbose output.
cmr=v1.7.5:reviewer=manjugv
This commit was SVN r31129.
It is usually not a good idea to assert when something is not implemented
or something goes wrong. Replace asserts with debug output and return.
cmr=v1.7.5:reviewer=manjugv
This commit was SVN r31128.
The necessary information is stored in the proc object. There is no need
to allgather the local process data to determine if another rank is on
the same socket.
cmr=v1.7.5:reviewer=manjugv
This commit was SVN r31127.
After discussion with Manju we decided to update these the process count
limits of the shared memory collectives to an arbitrarily large number.
cmr=v1.7.5:ticket=trac:4405
This commit was SVN r31126.
The following SVN revision numbers were found above:
r31096 --> open-mpi/ompi@3f469d08e7
The following Trac tickets were found above:
Ticket 4405 --> https://svn.open-mpi.org/trac/ompi/ticket/4405
* Ensure that all endpoints[x] values are initialized to NULL
* If ibv_create_ah fails, remove each endpoint from the
module->all_endpoints list so that the endpoint can be destructed
properly.
Submitted by Jeff Squyres, reviewed by Dave Goodell.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r31111.
This provides full locality - i.e., not just node-level, but all the way down to whatever common binding level exists between the procs.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31106.
Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE.
Also mark a few places where opal_show_help() should have been used;
Manju will take care of these.
This commit was SVN r31104.
In r31071 I modified the logic to not increment the hierarchy level if
no processes were selected by that sbgp. That fixed a problem seen on
systems where we don't support process binding. The problem is there
is a case where we actually did select processes yet the number of
selected processes is 0. We need to increment the hierarchy in this case
as well.
This should fix the segmentation fault found by recent MTT runs. Once
this is committed to 1.7.5 remove the .ompi_ignore's from coll/ml and
bcol/ptpcoll. Tested with ompi-tests/ibm.
cmr=v1.7.5:reviewer=rhc
This commit was SVN r31081.
The following SVN revision numbers were found above:
r31071 --> open-mpi/ompi@1911d97044
This was causing JVMs to run out of stack space, and all manner of
badness ensued.
Instead, use the heap -- that's what it's there for.
cmr=v1.7.5:reviewer=rhc:subject=make coll/ml use the heap for large debug array
This commit was SVN r31073.
fails to select any processes on any nodes.
Also modified basesmsocket to only print debugging info to the framework
output.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31071.
It is not valid to call flush outside a passive target epoch nor is
it valid to call lock/lock_all when no_locks is set. In the former
we were just semantically incorrect and the later would crash and
burn.
cmr=v1.7.5:ticket=trac:4382
This commit was SVN r31046.
The following Trac tickets were found above:
Ticket 4382 --> https://svn.open-mpi.org/trac/ompi/ticket/4382
This fixes a bug in r31029 which removes the use of the pml base request
(also not a good way since cm doesn't use the base request). We now allocate
a data structure (ugh) to determine the needed information. Tested with
mtt/onesided.
cmr=v1.7.5:ticket=trac:4379
This commit was SVN r31044.
The following SVN revision numbers were found above:
r31029 --> open-mpi/ompi@29e00f9161
The following Trac tickets were found above:
Ticket 4379 --> https://svn.open-mpi.org/trac/ompi/ticket/4379
- Return an error if the caller specified both MPI_MODE_NOPRECEDE and
MPI_MODE_NOSUCCEED to MPI_Win_fence.
- Return an error if the caller attempts to enter an active target
epoch while already in a passive target epoch.
- End an active target epoch if MPI_Win_fence is called with
MPI_MODE_NOSUCCEED.
cmr=v1.7.5:ticket=trac:4382
This commit was SVN r31043.
The following Trac tickets were found above:
Ticket 4382 --> https://svn.open-mpi.org/trac/ompi/ticket/4382
need to enable the access epoch in MPI_Win_fence.
I missed this change when I fixed the semantics of MPI_Win_create. With
this commit our one-sided MTT runs are now running clean.
cmr=v1.7.5:reviewer=dgoodell
This commit was SVN r31041.
It seems we can't release accumulate buffers in completion callbacks
because the btls don't release registration resources until after the
callback has fired. The fix is to keep track of the unused buffers and
free them later. This should resolve issues when running IMB-EXT and
IMB-RMA.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31029.
Dave Goodell correctly pointed out that it is unusual to return MPI
error classes from internal ompi functions. Correct this in the RMA
case by adding an internal error code to match MPI_ERR_RMA_SYNC.
This does change OMPI_ERR_MAX. I don't think this will cause any
problems with ABI.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31012.
This commit resolves a number of crashed discovered my the onesided
tests in MTT. The functions in question were operating on the assumption
the user was calling RMA functions correctly.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31008.
NOTE: I transferred the oshmem-disabled-by-default from the 1.7 branch to the trunk to minimize future disruption if/when we change that option.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31006.
- -check-shmem-params is OFF by default. It checks OSHMEM API params and will abort on bad input
- hcoll do not save fallback coll pointers for unsupported collectives.
fixed by Val, Roman, reviewed by Miked/Igor
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30995.
The datatype unpacking code assumes that the packed datatype buffer has the
same alignment as an OPAL_PTRDIFF_TYPE. This was not enforced by the rdma
one-sided component. I changed the ordering and sized of various osc/rdma
headers to ensure their sizes are a multiple of 8-bytes and modified the
fragment allocation call to ensure all headers are 8-byte aligned. While
not the cleanest way to handle this situation it should resolve the issue.
Fixes trac:4315
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r30974.
The following Trac tickets were found above:
Ticket 4315 --> https://svn.open-mpi.org/trac/ompi/ticket/4315
assumes the send request is derived from mca_pml_base_send_request_t,
but this is not true for pml cm, so we end up freeing invalid pointer.
We cannot take the data pointer from the pml send request, so we pass
the allocated buffer pointer in req_complete_cb_data, and put the
osc_rdma_module pointer in that buffer as well.
Previously, osc_pt2pt was used with pml_cm which didn't have this
problem.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30967.
* clang warning stomp
* memory barrier for volatile variable use
These can go to 1.7.5 or can slip to v1.8 -- RM decision.
Submitted by Jeff Squyres, reviewed by Dave Goodell
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30944.
* Older versions of libusnic_verbs actually return 0 when querying for
an unknown port. So also check for a magic ID in the returned data
to *really* know if the usnic extensions are supported.
* Use a union (in the common_verbs area) and memcpy (in the btl) to
avoid undefined C type aliasing behavior.
* Ensure to memset the function table to 0 if the usnic extensions
are not supported.
Submitted by Jeff Squyres, reviewed by Dave Goodell.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30935.
When compiling --with-ft there are a few compiler warnings about
unused variables. This patch fixes those compiler warnings.
This commit was SVN r30927.
Realistically, the usnic BTL doesn't need to know anything about the
underlying transport except for its header length (so that it knows
where the payload begins in a received buffer). So remove the use of
the specific transport prefix union and just rely on the usnic verbs
extension to tell us what the header length is if we're using the
usNIC/UDP transport, or sizeof(struct ibv_grh) if we're using usNIC/L2
transport.
This commit was SVN r30914.
Check the IBV_TRANSPORT_* values. In the case of IBV_TRANSPORT_IWARP,
there's an ambiguity and we need to also check to see whether the
usnic verbs externsion probe exists.
This commit was SVN r30913.
If they exist, call the usnic verbs extensions to both enable UDP
support and get the UD receiver header length that should be used
(rather than assume 40/struct GRH).
This commit was SVN r30912.
- now add_procs can be called more than once (during MPI_INIT and Inter_Comm_Create)
- adjust MXM to this reality
fixed by Alina, reviewed by Yossi/Mike
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30907.
This allows compilers to know that the code path(s) where
ompi_rte_abort() is invoked won't return (and therefore won't warn in
certain cases).
cmr=v1.8:reviewer=rhc
This commit was SVN r30891.
We don't use this functionality any more; we use the transport_type
and device name to identify usnic devices. It's slightly easier
because we can transport_type+name from ibv_device_open() and don't
have to do an additional ibv_query_device() to get its attributes.
Reviewed by Dave Goodell.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30882.
Follow on to SVN trunk r30850: consolidate the ibv_create_ah() calls
into a single loop, MPI_WAITALL-style. That is, call the (effectively
non-blocking) ibv_create_ah() for each endpoint. If we get
NULL+EAGAIN, it means that the UDP ARP is still ongoing down in the
kernel, so just try again later. We put these all into a single loop
because it allows us to parallelize the ARP progress in the kernel.
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30879.
The following SVN revision numbers were found above:
r30850 --> open-mpi/ompi@3641500442
r30852 --> open-mpi/ompi@4e282a3295
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Basically: since usnic is a connectionless transport, we do not get
OS-provided services "for free" that connection-oriented transports
get, namely: "hey, I wasn't able to make a connection to peer X", and
"hey, your connection to peer X has died."
This connectivity-checker runs in a separate progress thread in the
usnic BTL in local rank 0 on each server. Upon first send in any
process, the connectivty-checker agent will send some UDP pings to the
peer to ensure that we can reach it. If we can't, we'll abort the job
with a nice show_help message.
There's a lengthy comment in btl_usnic_connectivity.h explains the
scheme and how it works.
Reviewed by Dave Goodell.
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30860.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
finalize.
Closes trac:4290
cmr=v1.7.5:reviewer=miked
This commit was SVN r30854.
The following Trac tickets were found above:
Ticket 4290 --> https://svn.open-mpi.org/trac/ompi/ticket/4290
- Fix several typos is osc/rdma.
- Fix a locking issue in osc/sm that was caused by an incorrect
assumption about the semantics of opal_atomic_add_32.
- Always unlock the accumulation lock in osc/sm.
- The base of a processes shared memory window should be NULL if
the size is zero. Fixed.
cmr=v1.7.5:ticket=trac:4304
This commit was SVN r30853.
The following Trac tickets were found above:
Ticket 4304 --> https://svn.open-mpi.org/trac/ompi/ticket/4304
Follow on to SVN trunk r30850: consolidate the ibv_create_ah() calls
into a single loop, MPI_WAITALL-style. That is, call the (effectively
non-blocking) ibv_create_ah() for each endpoint. If we get
NULL+EAGAIN, it means that the UDP ARP is still ongoing down in the
kernel, so just try again later. We put these all into a single loop
because it allows us to parallelize the ARP progress in the kernel.
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30852.
The following SVN revision numbers were found above:
r30850 --> open-mpi/ompi@3641500442
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
ibv_create_ah() may need to effect an ARP resolution, which may take
some time. Rather than blocking in ibv_create_ah(), the usNIC driver
may return NULL and set errno to EAGAIN indicating that we should try
again (i.e., the ARP resolution is proceeding under the covers).
So add a simple loop here to loop over ibv_create_ah() until it
returns non-(NULL+EAGAIN). A future commit will make this a bit more
efficient.
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30850.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Prior to this commit we matched local interfaces to remote interfaces in
order to create endpoints in a simplistic way. If any remote interfaces
were on the same subnet as any of our local interfaces then only local
interfaces would be paired (IP-routed remote interfaces would be
ignored).
This commit introduces a more general scheme which attempts to make the
"best" pairing of local interfaces to remote interfaces. We now cast
the problem as a graph theory problem known as the "Assignment Problem",
or finding a maximum-cardinality, minimum-weight bipartite matching. We
solve this problem by reducing the bipartite graph of interface
connectivity to a flow network and then solving for a minimum cost flow.
This is then easily converted into back into a matching on the original
bipartite graph.
In the new scheme, interfaces on the same subnet are preferred over
interfaces requiring intermediate routing hops and higher bandwidth
links are preferred over lower bandwidth links.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30849.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Querying the OS routing table is important for making decisions about
which local and remote interfaces should be paired into reliable
communication channels.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30848.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This code is intended to support usNIC interface matching functionality.
We currently view that problem as essentially the "Assignment Problem"
(http://en.wikipedia.org/wiki/Assignment_problem), for which there are
many possible solution approaches, including flow-network analysis. In
the future, we might transition to a more nuanced view of the problem
which would likely also be flow-network based.
To this end, the current code focuses on providing one major algorithm
to the core usnic BTL: `ompi_btl_usnic_solve_bipartite_assignment`. It
also exposes several typical and necessary functions for constructing,
manipulating, and querying weighted, directed graphs.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30847.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30846.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This commit adds mechanisms for writing and running unit tests in the
usnic BTL. The short version of how to run the tests is:
1. Configure with `--enable-ompi-btl-usnic-unit-tests`. This will cause
the unit testing code and test runner utility to be built.
2. Run the tests by running `ompi_btl_usnic_run_tests`.
See `README.test` for full details.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30845.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
These includes only exist in the Cisco-internal usnic-v1.6 code base,
but they should not exist anywhere except btl_usnic_compat.h in order to
minimize source differences between usnic-v1.6 and v1.7/trunk.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30844.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Lower layer (hardware or software) bugs can result in a mismatch between
our BTL-layer payload size and the actual packet length. We now check
that in order to catch these cases, which otherwise can result in
MPI-layer message corruption.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30843.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
We were missing a debug message for a very common recv case, making it a
bit harder to follow a debug log.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30842.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
There was a duplicated subnet check in the sender hash lookup routine.
This caused receivers to always fail the sender hash lookup if the
sender was in a different subnet, so the receiver would discard the
packet as though it were coming from a different job.
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30841.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
If ibv_create_ah fails, we will not initialize the `endpoint->proc`.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30840.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This functionality is required for routable UDP/IP usnic traffic.
Previously we would only setup endpoints for remote interfaces on the
same subnet as the current module's local interface. This behavior
still holds if two processes share any common subnets. However, if the
two processes only have no subnets in common then we assume that all
interfaces are reachable from all other interfaces and wire them up in a
1-1, randomly-matched order somewhat similarly to the "tcp" BTL's
behavior.
Only match in different subnets if we detect UDP support in the lower
layer.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30839.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This commit decouples OMPI deployment from the version(s) of the lower
layers of the stack by probing for UDP support.
Verbs applications assume a 40-byte header (there is no current
mechanism for querying payload offset). So to support a 42-byte UDP
header without causing existing applications like ibv_ud_pingpong or
older versions of OMPI to crash, we must inform libusnic_verbs that we
are aware of the nonstandard payload offset. We do this by overriding
the `transport_type` field of the device to be 42 before calling
`ibv_open_device`. If the library resets it to something else, then we
know the lower layers are UDP capable. Otherwise we use the older
custom-L2 format.
This necessitated some minor ugliness in common_verbs, but it's as tidy
as Jeff and I know how to make it right now.
This commit only adds support for UDP headers and connectivity over the
same L2 network, it does not touch routing or interface pairing.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30838.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Just trying to be deliberate about keeping fastpath-accessed fields
grouped together to fit into the same 64-byte cache line.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30837.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30836.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30835.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30834.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30833.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Valgrind showed this one, just a bit of sloppiness with the reference
counting.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30832.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
The logic did not correctly perform the OR behavior that is described
in the doxy docs for this function. This commit fixes the logic so
that a port will be included if it has supports any of the
capabilities indicated by the passed-in flags.
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30831.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
1. Changed rng_buff_t --> opal_rng_buff_t
2. All global variables obey the prefix rule
3. Old code has been removed
4. Found a couple of unnecessary includes
Refs trac:4298
This commit was SVN r30807.
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
We're going to be bringing a bunch of usnic code to the SVN trunk
soon, and I basically brought this commit over out of order. So I'm
reverting it for now; the same functionality will come back shortly.
This commit was SVN r30805.
The following SVN revision numbers were found above:
r30804 --> open-mpi/ompi@5bedcc15bf
