Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
* Expand the use of the `orte_keep_fqdn_hostnames` MCA parameter when
it is set to false.
* If that parameter is set to false (default) then short hostnames
(e.g., `node01`) will match with the long hostnames (e.g.,
`node01.mycluster.org`). This allows a user (or resource manager)
to mix the use of short and long hostnames.
- Note that this mechanism does _not_ perform a DNS lookup, but
instead strips off the FQDN by truncating the hostname string at
the first `.` character (when not an IP address).
- By default (`false`) the following is true:
`node01 == node01.mycluster.org == node01.bogus.com`
since we use `node01` as the hostname.
Don't strcmp against the default value -- the default value may change
over time. Instead, check to see if the MCA var source is not
DEFAULT.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Note that this cannot be used for MPI performance testing. It is really only useful for ORTE scaling tests. It also only works with the rsh/ssh launcher.
These macros should really be named OPAL_SUMMARY_*; they're used in
all projects, and therefore should be in the lowest later project (OPAL).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Ensure the returned exit status is non-zero if we fail to map
If no -np is given, but either -host and/or -hostfile was given, then error out with a message telling the user that this combination is not supported.
If -np is given, and -host is given with only one instance of each host, then default the #slots to the detected #pe's and enforce oversubscription rules.
If -np is given, and -host is given with more than one instance of a given host, then set the #slots for that host to the number of times it was given and enforce oversubscription rules. Alternatively, the #slots can be specified via "-host foo:N". I therefore believe that row #7 on Jeff's spreadsheet is incorrect.
With that one correction, this now passes all the given use-cases on that spreadsheet.
Make things behave under unmanaged allocations more like their managed cousins - if the #slots is given, then no-np shall fill things up.
Fixes#1344
Turns out there are some cases where the Cray
wlm_detect_get_active may return NULL, in which
case fallback to wlm_detect_get_default method
is suggested. Make use of the fallback to
avoid segfaults under some circumstances in the
ALPS plm selection method.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
* Clean up the DVM so it continues to run even when applications error out and we would ordinarily abort the daemons.
* Create a new errmgr component for the DVM to handle the differences.
* Cleanup the DVM state component.
* Add ORTE bindings directory and brief README
* Pass a local tool index around to match jobs.
* Pass the jobid on job completion.
* Fix initialization logic.
* Add framework for python wrapper.
* Fix terminate-with-non-zero-exit behavior so it properly terminates only the indicated procs, notifies orte-submit, and orte-dvm continues executing.
* Add some missing options to orte-dvm
* Fix a bug in -host processing that caused us to ignore the #slots designator. Add a new attribute to indicate "do not expand the DVM" when submitting job spawn requests.
* It actually makes no sense that we treat the termination of all children differently than terminating the children of a specific job - it only creates confusion over the difference in behavior. So terminate children the same way regardless.
Extend the cmd_line utility to easily allow layering of command line definitions
Catch up with ORTE interface change and make build more generic.
Disable "fixed dvm" logic for now.
Add another cmd_line function to merge a table of cmd line options with another one, reporting as errors any duplicate entries. Use this to allow orterun to reuse the orted_submit code
Fix the "fixed_dvm" logic by ensuring we reset num_new_daemons to zero. Also ensure that the nidmap is sent with the first job so the downstream daemons get the node info. Remove a duplicate cmd line entry in orterun.
Revise the DVM startup procedure to pass the nidmap only once, at the startup of the DVM. This reduces the overhead on each job launch and ensures that the nidmap doesn't get overwritten.
Add new commands to get_orted_comm_cmd_str().
Move ORTE command line options to orte_globals.[ch].
Catch up with extra orte_submit_init parameter.
Add example code.
Add documentation.
Bump version.
The nidmap and routing data must be updated prior to propagating the xcast or else the xcast will fail.
Fix the return code so it is something more expected when an error occurs. Ensure we get an error returned to us when we fail to launch for some reason. In this case, we will always get a launch_cb as we did indeed attempt to spawn it. The error code will be returned in the complete_cb.
Fix the return code from orte_submit_job - it was returning the tracker index instead of "success". Take advantage of ORTE's pretty-print capabilities to provide a nice error output explaining why we failed to launch. Ensure we always get a launch_cb when we fail to launch, but no complete_cb as the job never launched.
Extend the error reporting capability to job completion as well.
Add index parameter to orte_submit_job().
Add orte_job_cancel and implement ORTE_DAEMON_TERMINATE_JOB_CMD.
Factor out dvm termination.
Parse the terminate option at tool level.
Add error string for ORTE_ERR_JOB_CANCELLED.
Add some safeguards.
Cleanup and/of comments.
Enable the return.
Properly ORTE_DECLSPEC orte_submit_halt.
Add orte_submit_halt and orte_submit_cancel to interface.
Use the plm interface to terminate the job
Turns out that the way the SLURM plm works
is not compatible with the way MPI processes
on Cray XC obtain RDMA credentials to use
the high speed network. Unlike with ALPS,
the mpirun process is on the first compute
node in the job. With the current PLM launch
system, mpirun (HNP daemon) launches the MPI
ranks on that node rather than relying on
srun.
This will probably require a significant amount
of effort to rework to support Native SLURM
on Cray XC's. As a short term alternative,
have the alps plm (which gets selected by default
again on Cray systems regardless of the launch system)
check whether or not srun or alps is being used on the
system. If alps is not being used, print a helpful
message for the user and abort the job launch.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Cray has added plugins to slurm to support
the Cray programming env (alpslli, cray pmi, etc).
Some of the workarounds needed with plm/alps
to avoid issues with Cray PMI getting mixed up
with orte launch system are also required in
a cray native slurm environment.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
The mca_base_select function uses returned priorities to select the
best component/module. This priority may be of use to the caller so
pass that information back in an optional argument. If the priority is
not needed pass NULL.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This required modifying the mca_component_select function to actually check the return code on a component query - it was blissfully ignoring it.
Also do a little cleanup to avoid bombarding the user with multiple error messages.
Thanks to Patrick Begou for reporting the problem
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
* don't pass --tree-spawn to the orted cmd line. If someone doesn't want tree-spawn, it shows up as an MCA param anyway
* ensure state/orted component disqualifies itself from CM operations
* clarify the DVM proc_type definitions
* ensure we stop littering the tmp dir with session directories
In order to address issue #741, the orted's now are
always launched with the Cray PMI environment variables
PMI_NO_FORK
PMI_NO_PREINITIALIZE
set to disable running of the library's ctor.
So there's no longer a need to set these for the
application(s) being launched by the orted's.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Turns out that when one builds Open MPI with --disable-dlopen
for Cray, a whole bunch of cray specific libraries get linked
in to the orted executable. One of these is Cray PMI. The
Cray PMI has a ctor which, if run, causes job launches using
mpirun to fail. This commit suppresses the running of the
ctor and thus prevents failure to launch.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
A few uninitialized common symbols are remaining (generated by flex) :
* orte/mca/rmaps/rank_file/rmaps_rank_file_lex.c: orte_rmaps_rank_file_leng
* orte/mca/rmaps/rank_file/rmaps_rank_file_lex.c: orte_rmaps_rank_file_text
* orte/util/hostfile/hostfile_lex.c: orte_util_hostfile_leng
* orte/util/hostfile/hostfile_lex.c: orte_util_hostfile_text
