ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
24 627 коммитов 3 Ветки 0 Теги 130 MiB
Граф коммитов

195 Коммитов

Автор SHA1 Сообщение Дата
Gilles Gouaillardet
0221f59197 pmix1xx configury: invoke sub-configure with CFLAGS and CPPFLAGS on the command line 
if CFLAGS and/or CPPFLAGS are passed to the ompi configure command line, pmix1xx
configure will not use the correct ones previously passed in the environment
see discussion started at http://www.open-mpi.org/community/lists/devel/2015/10/18159.php
Thanks Siegmar Gross for bringing this to our attention
 2015-10-22 10:13:52 +09:00
Nathan Hjelm
9602484568 Merge pull request #1040 from hjelmn/mtl_priority 
Change how cm's priority is calculated
 2015-10-19 14:18:36 -06:00
Nathan Hjelm
8b5810f7f7 mca/base: add priority output to mca_base_select 
The mca_base_select function uses returned priorities to select the
best component/module. This priority may be of use to the caller so
pass that information back in an optional argument. If the priority is
not needed pass NULL.

Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
 2015-10-19 12:32:41 -06:00
Ralph Castain
363f62a506 Fix singleton operations when running under a SLURM allocation. Sadly, SLURM's PMI will return success even if the PMI server isn't actually available. This leads to erroneous selection of pmix and ess components. So add a further requirement (namely, that we see a job_step envar) to the SLURM pmix components along with some modification of ess selection code to avoid the problem 2015-10-17 20:24:03 -07:00
annu13
cc5e1e26a5 sync with pmix master (repo_rev git69c398e) 2015-10-09 15:17:43 -07:00
annu13
5787e9248f cleaned up debug stmts 2015-10-06 06:25:36 -07:00
annu13
30ba00e05d sync with master 2015-10-06 06:04:54 -07:00
annu13
6f37c0e3e8 sync with PMIX master 2015-10-02 17:25:48 -07:00
annu13
7434c47626 sync with PMIX master 2015-10-02 17:17:48 -07:00
Ralph Castain
8f6855459d Cleanup some coverity warnings 2015-09-30 10:33:53 -07:00
Ralph Castain
ec5d001538 Don't set the return value pointer to NULL as it actually is required to point to real storage - just return an error code if a modex recv doesn't succeed. 2015-09-28 20:45:50 -07:00
Ralph Castain
a4a3dfd480 Cleanup the code a bit by simply adding our nspace to the top of the list of jobid <-> nspace correlations. Add two new APIs to opal_pmix for registering new jobid/nspace pairs and retrieving an nspace given a jobid - these are required to support connect/accept. No impact on the PMIx library. 2015-09-28 08:50:13 -07:00
Ralph Castain
f713e71d51 Minor cleanup - add jobid <-> nspace in one more place 2015-09-27 14:48:39 -07:00
Ralph Castain
fad5638596 Resolve the naming issue when direct-launched by PMIx-enabled RMs using a minimal-impact approach. Detect if we were launched via ORTE - if so, then use our standard methods for computing the jobid. If not, then just hash the nspace to create the jobid, and track the jobid <-> nspace correspondece down in the opal/mca/pmix/pmix1xx component. We then do the translation any time a function that passes process names is invoked. 2015-09-27 09:57:59 -07:00
Ralph Castain
209600fe26 Sync to PMIx master 2015-09-23 21:00:30 -07:00
Ralph Castain
749bd4e6fe Plug a few memory leaks identified by valgrind 2015-09-23 15:21:04 -07:00
Nathan Hjelm
8c4da756cf pmix: do not touch recently freed memory 
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
 2015-09-23 08:44:50 -06:00
Ralph Castain
4c654ffd94 Sync to PMIx master 2015-09-21 21:27:06 -07:00
Ralph Castain
1b7930ad52 Silence some warnings and address Coverity issues 2015-09-16 07:58:22 -07:00
Ralph Castain
c1bbbb5e2f Remove the last involvement of the OOB system from the MPI layer, remove the no-longer-needed usock/oob component, and have procs no longer open the RML, OOB, ROUTED, and GRPCOMM frameworks as PMIx now provides all required app-mpirun cmds 2015-09-15 13:08:35 -07:00
Ralph Castain
22d7c0081a Fix the no-disconnect test by resolving a segfault on free - opal_dss.unload will return the remaining unpacked portion of a buffer. As such, it cannot return the pointer to that info as it might be partway inside of a malloc'd region. So copy the data out of the buffer. 2015-09-11 13:01:35 -07:00
Ralph Castain
dc5796b8a1 Revert "Revert "Fix the handling of cpusets so we get the correct cpuset for each local peer. Add the ability to indicate that a modex request is "optional" so we don't call the server if we don't find the value. Take advantage of that to allow the MPI layer to decide that the lack of locality info indicates non-local"" 
Fix the locality computation by correctly computing the vpid of the local peer

This reverts commit open-mpi/ompi@6a8fad49e5.
 2015-09-11 08:29:51 -07:00
Ralph Castain
6a8fad49e5 Revert "Fix the handling of cpusets so we get the correct cpuset for each local peer. Add the ability to indicate that a modex request is "optional" so we don't call the server if we don't find the value. Take advantage of that to allow the MPI layer to decide that the lack of locality info indicates non-local" 
This reverts commit f94f3cda214ab937c46802896fb53b84bec6cc3a.
 2015-09-11 02:01:25 -07:00
Ralph Castain
e0a52354d4 Sync to PMIx master at open-mpi/pmix@89680d6663 
Includes changes to support BigEndian machines
 2015-09-10 20:47:40 -07:00
Ralph Castain
a2a15cea8a Fix the s1 component so direct launch is supported for SLURM 2015-09-10 16:07:37 -07:00
rhc54
3430f154fc Merge pull request #885 from hppritcha/topic/pmix_not_pmix1xx_u16_prob 
pmix/~pmix1xx: use u32 for OPAL_PMIX_LOCAL_SIZE
 2015-09-10 15:38:54 -07:00
Howard Pritchard
2bbf22e2d0 pmix/~pmix1xx: use u32 for OPAL_PMIX_LOCAL_SIZE 
Looks like in ess_pmi_module.c u32 is being used
for retrieving OPAL_PMIX_LOCAL_SIZE, while s1/s2/cray
pmix components were storing as u16.

This commit fixes this problem.

Signed-off-by: Howard Pritchard <howardp@lanl.gov>
 2015-09-10 11:41:39 -07:00
Ralph Castain
f94f3cda21 Fix the handling of cpusets so we get the correct cpuset for each local peer. Add the ability to indicate that a modex request is "optional" so we don't call the server if we don't find the value. Take advantage of that to allow the MPI layer to decide that the lack of locality info indicates non-local 2015-09-10 10:25:30 -07:00
Ralph Castain
4c47c498ac Sync to latest PMIx master 
Allow the blocking send and recv to keep trying
 2015-09-09 11:48:47 -07:00
Gilles Gouaillardet
7f0ed74d24 pmix1xx: fix CPPFLAGS when DSO are not built 2015-09-09 14:20:12 +09:00
rhc54
f6b6b9a9ca Merge pull request #877 from rhc54/topic/s1s2 
Cleanup s1 and s2 components
 2015-09-08 19:20:59 -07:00
Ralph Castain
1cdb86b8c7 Cleanup s1 and s2 components, and ensure that mpirun and orteds only use non-direct-launch pmix components. 2015-09-08 18:37:09 -07:00
rhc54
3a446c9797 Merge pull request #876 from rhc54/topic/hnp 
Fix segfault upon job error
 2015-09-08 15:10:51 -07:00
rhc54
47f437608d Merge pull request #875 from rhc54/topic/dynamics 
Stop a segfault in the test by correctly passing all the argv during spawn
 2015-09-08 14:35:42 -07:00
Ralph Castain
459f169e06 Fix segfault upon job error 
Silence some unnecessary error-logs
 2015-09-08 14:03:06 -07:00
Ralph Castain
ae7156cabb Stop a segfault in the test by correctly passing all the argv during spawn 2015-09-08 13:42:46 -07:00
rhc54
8053357fcc Merge pull request #873 from rhc54/topic/static 
Add the libs required for PMIx to support static builds (and trim all excess whitespace)
 2015-09-08 11:28:47 -07:00
Ralph Castain
291afe502f Add the libs required for PMIx to support static builds 
Remove unneeded CPPFLAGS
 2015-09-08 10:21:06 -07:00
Jeff Squyres
bc9e5652ff whitespace: purge whitespace at end of lines 
Generated by running "./contrib/whitespace-purge.sh".
 2015-09-08 09:47:17 -07:00
Ralph Castain
e6add86e4f Deal with connect/accept between two jobs from different mpirun's. Somewhat optimize connect/accept by using MPI bcast to distribute the participants instead of another PMIx lookup. Cleanup some Coverity issues. 2015-09-07 09:19:24 -07:00
Ralph Castain
37c3ed68e7 Cleanup connect/disconnect and bring comm_spawn back online! 2015-09-06 10:27:39 -07:00
rhc54
665b30376a Merge pull request #868 from rhc54/topic/hwloc 
Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given
 2015-09-04 17:58:07 -07:00
Ralph Castain
d97bc29102 Remove OPAL_HAVE_HWLOC qualifier and error out if --without-hwloc is given 2015-09-04 16:54:40 -07:00
rhc54
d45ccda813 Merge pull request #866 from rhc54/topic/updatepmix 
Update PMIx support
 2015-09-04 11:09:36 -07:00
Ralph Castain
f6948c2bb4 Sync with PMIx master 43e45c3. Get multi-node publish/lookup/unpublish working 2015-09-04 10:07:17 -07:00
Howard Pritchard
0557beee22 Merge pull request #864 from hppritcha/topic/pmix_cray_more_funcs 
pmix/cray: more stubs plus a get_version method
 2015-09-03 14:52:46 -06:00
Howard Pritchard
6e7345c790 pmix/cray: more stubs plus a get_version method 
Add more stubs to reduce likelihood of future
mysterious segfaults if some of the newer pmix
funcs start to get used within ompi.

Add a get_version to return the version of the
Cray PMI library being used, since the Cray PMI
library actually has a function to get that info.

Be more accurate about which functions have a hope
of being implemented using Cray PMI and those which
never will.

Signed-off-by: Howard Pritchard <howardp@lanl.gov>
 2015-09-03 12:51:50 -07:00
Ralph Castain
a772b46c15 Bring the MPI_Publish and friends online 2015-09-02 12:04:07 -07:00
Ralph Castain
95dbd70f44 Sync to PMIx 1.1, sha- 51479b0 2015-09-01 14:09:25 -07:00
rhc54
d8cb3fe705 Merge pull request #852 from rhc54/topic/pmix 
Sync to PMIx tarball - includes:
 2015-09-01 06:54:34 -07:00