* Matches the blocking versions of these interfaces
- `iallreduce.c` to match `allreduce.c`
- `ireduce.c` to match `reduce.c`
- `ireduce_scatter.c` to match `reduce_scatter.c`
* Workaround for IMB-NBC benchmark, similar to the workaround
in place for the IMB-MPI1 benchmark for the blocking collectives.
* If hcoll is given a negative priority, but not enabled=0 then
the module is constructed, but then destructed before calling
it's query(). So the previous pointers are not initialized.
If we try to OBJ_RELEASE them in a debug build an assert will fire.
This commit adds some protection against that and initializes
the _module pointers to NULL.
* Print a verbose message if the component was disqualified because of
a negative priority.
* If a disqualified component provided a module, release it.
* Display list of selected components in priority order
- During the process of volunteering collective functions for a
communicator, print the component name and priority. This will
cause the verbose messages to be displayed in reverse priority
order (lowest priority first, up to highest). This is helpful
when determining which collective components are active in which
order for a given communicator.
To see the messages you need the following MCA parameter set to 9
or higher: `-mca coll_base_verbose 9`
* Adjust verbose for commonly needed verbose output from 10 to 9 to
make it easier to access this information.
This commit fixes a hang reported by @nysal which happens when a
request is completed after a sync object is created but before the
sync object can be assigned to the request. In this case we need to
set the sync signaling field to false to ensure WAIT_SYNC_RELEASE does
not hang.
Fixesopen-mpi/ompi#1828
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit makes bml/r2 more restrictive on which endpoints end up in the rdma
endpoint list. Before this commit an endpoint was added if it supported either
put or get. This was done to ensure that endpoints are available for RMA.
Thought it is possible to support put or get endpoints we only currently
support endpoints that have put, get, and amos. bml/r2 now reflects this
support.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
The OPAL_ENABLE_MULTI_THREADS macro is always defined as 1. This was
causing us to always use the multi-thread path for synchronization
objects. The code has been updated to use the opal_using_threads()
function. When MPI_THREAD_MULTIPLE support is disabled at build time
(2.x only) this function is a macro evaluating to false so the
compiler will optimize out the MT-path in this case. The
OPAL_ATOMIC_ADD_32 macro has been removed and replaced by the existing
OPAL_THREAD_ADD32 macro.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a performance regression introduced by the request
rework. We were always using the multi-thread path because
OPAL_ENABLE_MULTI_THREADS is either not defined or always defined to 1
depending on the Open MPI version. To fix this I removed the
conditional and added a conditional on opal_using_threads(). This path
will be optimized out in 2.0.0 in a non-thread-multiple build as
opal_using_threads is #defined to false in that case.
Fixesopen-mpi/ompi#1806
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Need to increment the total size after checking the local offset not
before. This typo causes large allocations with MPI_Win_allocate() to
fail.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fixed an error where if there were no MPI exceptions, a
JNI error could still exist and not get handled.
Signed-off-by: Nathaniel Graham <nrgraham23@gmail.com>
It is valid for any rank to deviate on the split_type argument if they
specify MPI_UNDEFINED. The code was incorrectly not allowing this
condition. Changed the split_type uniformity check and allow
local_size to be 0 if the local split_type is MPI_UNDEFINED.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Newer versions of gcc have "poisoned" the __malloc_initialize_hook
name and it can no longer be used. Added a configure check and
protection around its usage.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
According to MPI-3.1 P.122, `ni` for `MPI_COMBINER_DARRAY`
should be `4*ndims+4`, not `4*size+4`.
This bug may cause SEGV if `size` is smaller than `ndims`
when the darray is used for one-sided communication (pt2pt OSC).
This bug was introduced in open-mpi/ompi@79b13f36 (when darray
became a first class citizen and the `a_i` index of darray was
shifted by 2). The corresponding `MPI_Type_create_darray()`
function sets a right value so we don't need to update the function.
Add PMIx 2.0
Remove PMIx 1.1.4
Cleanup copying of component
Add missing file
Touchup a typo in the Makefile.am
Update the pmix ext114 component
Minor cleanups and resync to master
Update to latest PMIx 2.x
Update to the PMIx event notification branch latest changes
Per discussion on https://github.com/open-mpi/ompi/pull/1767 (and some
subsequent phone calls and off-issue email discussions), the PSM
library is hijacking signal handlers by default. Specifically: unless
the environment variables `IPATH_NO_BACKTRACE=1` (for PSM / Intel
TrueScale) is set, the library constructor for this library will
hijack various signal handlers for the purpose of invoking its own
error reporting mechanisms.
This may be a bit *surprising*, but is not a *problem*, per se. The
real problem is that older versions of at least the PSM library do not
unregister these signal handlers upon being unloaded from memory.
Hence, a segv can actually result in a double segv (i.e., the original
segv and then another segv when the now-non-existent signal handler is
invoked).
This PSM signal hijacking subverts Open MPI's own signal reporting
mechanism, which may be a bit surprising for some users (particularly
those who do not have Intel TrueScale). As such, we disable it by
default so that Open MPI's own error-reporting mechanisms are used.
Additionally, there is a typo in the library destructor for the PSM2
library that may cause problems in the unloading of its signal
handlers. This problem can be avoided by setting `HFI_NO_BACKTRACE=1`
(for PSM2 / Intel OmniPath).
This is further compounded by the fact that the PSM / PSM2 libraries
can be loaded by the OFI MTL and the usNIC BTL (because they are
loaded by libfabric), even when there is no Intel networking hardware
present. Having the PSM/PSM2 libraries behave this way when no Intel
hardware is present is clearly undesirable (and is likely to be fixed
in future releases of the PSM/PSM2 libraries).
This commit sets the following two environment variables to disable
this behavior from the PSM/PSM2 libraries (if they are not already
set):
* IPATH_NO_BACKTRACE=1
* HFI_NO_BACKTRACE=1
If the user has set these variables before invoking Open MPI, we will
not override their values (i.e., their preferences will be honored).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
According to MPI-3.1 P.121, `ni` for `MPI_COMBINER_HINDEXED_BLOCK`
should be `2`, not `2 + count`.
This bug was introduced in 113b45b4 (when `MPI_Type_create_hindexed_block`
support is added in Open MPI) and fixed partially in 7f5314ee and 8de93982.
This commit fixes the remaining part.
Probably this bug has no user impact. It only consumes a bit more memory.
This commit fixes a bug in waitany that causes the code to go past the
beginning of the request array. The loop conditional i >= 0 is invalid
since i is unsigned. Changed to loop to check (i+1) > 0.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes two bugs in pml/ob1:
- Do not called MCA_PML_OB1_PROGRESS_PENDING from
mca_pml_ob1_send_request_start_copy as this may lead to a recursive
call to mca_pml_ob1_send_request_process_pending.
- In mca_pml_ob1_send_request_start_rdma return the rdma frag object
if a btl fragment can not be allocated. This fixes a leak
identified by @abouteiller and @bosilca.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
NAG compiler use gcc (and not ld) as a linker, so in order to pass an option to the linker,
the flag is -Wl,-Wl,,<option> and not -Wl,<option>
Thanks Paul Hargrove for the report
* mpi/start: fix bugs in cm and ob1 start functions
There were several problems with the implementation of start in Open
MPI:
- There are no checks whatsoever on the state of the request(s)
provided to MPI_Start/MPI_Start_all. It is erroneous to provide an
active request to either of these calls. Since we are already
looping over the provided requests there is little overhead in
verifying that the request can be started.
- Both ob1 and cm were always throwing away the request on the
initial call to start and start_all with a particular
request. Subsequent calls would see that the request was
pml_complete and reuse it. This introduced a leak as the initial
request was never freed. Since the only pml request that can
be mpi complete but not pml complete is a buffered send the
code to reallocate the request has been moved. To detect that
a request is indeed mpi complete but not pml complete isend_init
in both cm and ob1 now marks the new request as pml complete.
- If a new request was needed the callbacks on the original request
were not copied over to the new request. This can cause osc/pt2pt
to hang as the incoming message callback is never called.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* osc/pt2pt: add request for gc after starting a new request
Starting a new receive may cause a recursive call into the pt2pt
frag receive function. If this happens and the prior request is
on the garbage collection list it could cause problems. This commit
moves the gc insert until after the new request has been posted.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
